kdocumenteditor-1.0/0040755000076400007640000000000007742332227014523 5ustar tasukuhomeuserkdocumenteditor-1.0/admin/0040755000076400007640000000000007742332225015611 5ustar tasukuhomeuserkdocumenteditor-1.0/admin/ChangeLog0100644000076400007640000005413207735744575017406 0ustar tasukuhomeuser2001-11-07 Walter Tasin * now #MIN_CONFIG tag takes parameters for KDE_USE_QT, too. e.g. #MIN_CONFIG(2.2) for qt 2.2 usage 2000-11-30 David Faure * acinclude.m4.in: Added kde_moduledir which points to $prefix/lib/kde2/ 2000-07-24 Alex Zepeda * acinclude.m4.in: Remove the test for malloc.h 2000-04-05 Michael Matz * config.pl : added kludge for compiling regexp's even if perl < 5.005 is installed * conf.change.pl : added support for autoconf 2.14.1 2000-03-27 David Faure * acinclude.m4.in, Makefile.common: changed inst-apps semantics If present, only the subdirs it lists will be configured and compiled. If absent, then subdirs is used (and inst-apps isn't generated anymore) 2000-03-22 David Faure * am_edit: Added support for KDE_ICON = AUTO 2000-03-18 David Faure * Makefile.common: Rewrote the list-of-Makefiles generation to make it simpler and nicer, using create_makefiles' way of doing it. Added support for COMPILE_LAST and COMPILE_FIRST in toplevel Makefile.am 2000-01-05 David Faure * Makefile.common: hacked around autoconf bug (setting INSTALL to ".." when calling a subconfigure and INSTALL is already set). 1999-12-15 Waldo Bastian * acinclude.m4.in: Test whether Qt compiles AND LINKS without flags. 1999-06-24 Stephan Kulow * am_edit: generate correct Makefile entries for kde-i18n toplevel directories * am_edit: 1999-06-14 Stephan Kulow * am_edit: remove idl generated files on make clean 1999-06-09 Stephan Kulow * am_edit: skipping programs with variables in sources for final 1999-06-07 Stephan Kulow * am_edit: added support for idl files 1999-06-02 Stephan Kulow * Makefile.common: preserve comments in .pot files to make it possible for programmers and translators to comment them 1999-06-02 Simon Hausmann * acinclude.m4.in: added kde_servicetypesdir 1999-06-02 David Faure * acinclude.m4.in: removed LIB_KFM and LIB_KDEUTIL aliases 1999-05-28 Simon Hausmann * acinclude.m4.in: added kde_servicesdir 1999-05-27 Stephan Kulow * am_edit: lots of changes for better support of --enable-final 1999-05-22 Stephan Kulow * acinclude.m4.in: added support for --with-dmalloc 1999-05-19 Stephan Kulow * acinclude.m4.in: added support for --enable-final * am_edit: added support for --enable-final 1999-05-06 Stephan Kulow * acinclude.m4.in: change the meaning of --disable-debug 1999-05-04 Helge Deller * acinclude.m4.in: the test for the X-includes/directories failed, when compile & link work without special directories (as on HP-UX). 1999-04-20 Stephan Kulow * am_edit: adding DESTDIR replacement for rm and uninstall-local too. Seems very useless, but makes testing for uninstall easier 1999-04-01 David Faure * acinclude.m4.in: Added -lkfile to $(LIB_KIO) 1999-03-30 David Faure * acinclude.m4.in: Added AC_CHECK_KDEMAXPATHLEN, which defines KDEMAXPATHLEN. 1999-03-29 David Faure * acinclude.m4.in: added LIB_X11 to XPMLIB and GLLIB, because on SCO, they need it _after_ themselves. 1999-03-28 David Faure * acinclude.m4.in: added LIB_KFM to LIB_KAB alias 1999-03-26 David Faure * acinclude.m4.in: made LIB_KFILE use LIB_KIO instead of LIB_KFM added LIB_KFORMULA 1999-03-20 Stephan Kulow * acinclude.m4.in: check for libXext - for Russel :) 1999-03-16 Stephan Kulow * acinclud3.m4.in: extend the MICO test with a list of possible places where to find CORBA.h 1999-03-15 Stephan Kulow * acinclude.m4.in: move $QTINC and $QTLIB in search path 1999-03-14 Stephan Kulow * am_edit: install-root is obsolute. Use DESTDIR always 1999-03-03 Stephan Kulow * acinclude.m4.in: fixing a bug, that $QTDIR was taken before --with-qt* * acinclude.m4.in: added KDE_USE_QT, that you can choose if to use QT 2.0 or KDE 1.0 * Makefile.common: added target package-merge * am_edit: many fixes to the POFILES handeling of am_edit 1999-03-02 Stephan Kulow * acinclude.m4.in: first look at libjpeg6b (from kdesupport) then for libjpeg * config.*, libtool.*: update to the latest FSF tools 1999-02-23 Stephan Kulow * acinclude.m4.in: error when Sparc CC is used. Better use it in configure and tell him the story then letting him find it while compiling * acinclude.m4.in: adding KDE_CHECK_EXTRA_LIBS to all possible tests, so that --with-extra-includes is used when needed. * acinclude.m4.in: configure looks for giflib30, so it should say so * acinclude.m4.in: don't overwrite x include parameters. Patch by Ari Lemmke (bug report 741) 1999-02-20 Stephan Kulow * acinclude.m4.in: fixing KDE_CHECK_PATHS for rechecking. In case of defaults (kdelibs) configure didn't cache the results 1999-02-18 David Faure * acinclude.m4.in: added AC_CHECK_S_ISSOCK, to fix #706. 1999-02-17 David Faure * acinclude.m4.in: added AC_CHECK_RANDOM, just like AC_CHECK_USLEEP, to enable the fake if necessary. 1999-02-13 Kurt Granroth * acinclude.m4.in: look for QT-2.0 1999-02-05 Stephan Kulow * acinclude.m4.in: in macro KDE_FIND_PATH treat user given dirs and $PATH dirs the same. Added seperate test for to find binary ($5) to replace findperl 1999-01-28 Stephan Kulow * automoc: added patch by jbb to be a little bit more precise about the number of sourcefiles that include the moc file if it's != 1. Besides that automoc will fail with exit code, so the Makefile.cvs process does stop in case a problem accoured. * automoc: don't hardcode header suffix, but allow *.h, *.hh and *.H 1999-01-27 Stephan Kulow * acinclude.m4.in: try qobjcoll.h and qapplication.h before saying OK to qt headers. (I could kill SuSE for splitting into qt-dev and qt-compat) 1991-01-23 Stephan Kulow * automoc: added fixes by JB 1999-01-21 Stephan Kulow * automoc: added --help and --path (for use in dist-hook) 1999-01-20 Alex Zepeda * ltconfig: added entries for FreeBSD 4.x 1999-01-19 Stephan Kulow * automoc: added a distclean-metasources target which deletes all moc files and let distclean depend on it 1999-01-18 Stephan Kulow * automoc: several fixes (ignore comment lines + join lines with \ ) * automoc: support META_INCLUDES in case the header files are not in the same dir as the sources. 1999-01-17 Stephan Kulow * automoc: several fixes. 1999-01-16 Stephan Kulow * automoc: added support for included MOC files. * acinclude.m4.in: use srcdir for the subdirs stuff as well * automoc: added better command line parsing and some preparation for handling "normal" moc files * acinclude.m4.in: added aliases for libkio and libkdeutil 1999-01-15 Harri Porten * automoc: Carved in stone syntax for Makefile.in: {program}_METASOURCES = USE_AUTOMOC [{suffix}] 1999-01-15 Stephan Kulow * Makefile.common: set top_srcdir to . 1999-01-14 Stephan Kulow * acinclude.m4.in: don't use config.h.bot any longer 1999-01-08 Stephan Kulow * acinclude.m4.in: added KDE_CHECK_NEWLIBS * acinclude.m4.in: test for Qt even if both --with-qt-headers and --with-qt-libraries are given. They may be wrong. 1999-01-06 Stephan Kulow * acinclude.m4.in: change the MOC test so it can be used for other tools as well 1998-12-28 Stephan Kulow * acinclude.m4.in: look for QT-1.42 since kpanel needs it 1998-12-27 Stephan Kulow * acinclude.m4.in: added /usr/lib for libpython test * acinclude.m4.in: take my email address out of it and added a reference to www.kde.org/faq * acinclude.m4.in: use Qt >= 1.4 * acinclude.m4.in: added KDE_CHECK_NAMESPACES 1998-12-18 Stephan Kulow * acinclude.m4.in: test for directories to exist before saying yes to compilation :) 1998-12-14 Stephan Kulow * acinclude.m4.in: added CPLUSPLUS for the kimgio test. It's only important for shaman right now, but at least there it is :) 1998-12-12 Stephan Kulow * Makefile.cvs: added common Makefile.cvs * acinclude.m4.in: Thomas.Schwarz@pro-sieben.de reported a very ugly bug in AC_PROG_CXXCPP, so I added my own version * acinclude.m4.in: added KDE_CREATE_SUBDIRS_LIST to simplify most toplevel configures 1998-12-11 Stephan Kulow * acinclude.m4.in: added call to AC_PROG_CXXCPP. Not really sure why it never caused problems * acinclude.m4.in: moved LIBTIFF alias * acinclude.m4.in: only test for the existance of libkimgio if the user wants to. For 99% of the applications it doesn't matter if configure can find libkimgio :) 1998-12-10 Stephan Kulow * acinclude.m4.in: some changes to the python check to handle $LIBDL 1998-12-09 Stephan Kulow * acinclude.m4.in: make Alex's tiff test a real one * acinclude.m4.in: fix the LIB_TIFF alias to really expand 1998-12-08 Alex Zepeda * acinclude.m4.in: Fix tiff test to use libtiff34 if it exists. This is what the FreeBSD port installs to for whatever reason. * acinclude.m4.in: s/kde/KDE/ (at least in some of the descriptions, obviously no variable names were touched. 1998-12-08 Stephan Kulow * acinclude.m4.in: moved the LIB_QT alias to the Qt check * acinclude.m4.in: unset KDEDIR before running conftest * acinclude.m4.in: fixed mean typo * acinclude.m4.in: added the copyright header for the gettext tests, so that people know we're legal ;) * acinclude.m4.in: set language to C++ before testing QIMGIO 1998-12-07 Alex Zepeda * acinclude.m4.in: Fix PNG test to use correct ANSI C code, and not trip up gcc. 1998-12-07 Stephan Kulow * acinclude.m4.in: don't hardcode -ldl * acinclude.m4.in: move the LIB_X11 alias to the X test to make it useful for kdesupport as well * acinclude.m4.in: give the word CHECK_KIMGIO a meaning in really checking for it * acinclude.m4.in: simple fix to prevent kimgio test from compiling KDE application in kdelibs 1998-12-05 Stephan Kulow * acinclude.m4.in: let KDE_CHECK_KIMGIO depend on AC_PATH_KDE, otherwise most tests fail. It didn't mean anything to 90% of the packages since they test for KDE before kimgio, but for shaman it does * ltconfig: the real fix for the Solaris && gcc problem. Thanks Kurt for reporting it and Alexandre for fixing it :) 1998-12-04 Stephan Kulow * libtool.*: update again * acinclude.m4.in: changed the function to test for libnsl to inet_ntoa since UnixWare 7's version did not have gethostbyname, but needs libnsl 1998-12-02 Stephan Kulow * acinclude.m4.in: fixed the MOC test (again) to use the PATH variable correctly (with the correct seperator) * config.guess: update from the soon to be released autoconf-2.13 1998-12-01 Stephan Kulow * acinclude.m4.in: fixes for the MOC test. Use PATH now when found 1998-11-30 Stephan Kulow * acinclude.m4.in: extended the MOC test. It checks now for the first line of the output of "moc --help" and looks for Qt in it. 1998-11-27 Stephan Kulow * ltconfig: another libtool update. Fixes an ugly bug on Solaris, when GNU ld is in path before Solaris ld, but gcc uses the later 1998-11-26 Stephan Kulow * acinclude.m4.in: made the Qt test more advance to check for qt 1.41 - I still need to make it better, but there shouldn't be too many qt releases in a row, would there? ;) * ltconfig: libtool update with better BSD/OS support 1998-11-22 Stephan Kulow * ltconfig: cool - libtool uses g++ now to link libraries on Solaris. This means, static objects become usuable on that plattforms (some others as well). 1998-11-20 Stephan Kulow * ltmain.sh: updated libtool from their CVS - fixes bugs we haven't found and adds some more features, that we do not need ;-) 1998-11-19 David Faure * acinclude.m4.in: added AC_CHECK_UTMP_FILE, taken from kdebase 1998-11-16 Harri Porten * automoc: take care of "ar" object files, too. 1998-11-16 Stephan Kulow * libtool.m4.in: revised my --silent patch. The solution Alexandre suggested is much better. 1998-11-15 Stephan Kulow * ltconfig.in: done some tweakings to support -export-dynamic with egcs * config.sub: wow - BeOS support :) 1998-11-14 Stephan Kulow * acinclude.m4.in: don't use rpath for test program, if rpath is disabled for applications * ltconfig: patched libtool to make it silent without making ltconfig silent * acinclude.m4.in: make libtool silent again * libtool.m4.in: update to libtool-981114 (untested stuff, but we have to test it to make it tested - sounds that logical? :-) * libtool.m4.in: moved the self stricked libtool tests to "our" file. * acinclude.m4.in: moved ChangeLog of kdebase which I used to maintain acinclude.m4.in logs to kde-common/admin. Hopefully I will maintain it more often from now on :) 1998-07-27 Stephan Kulow * acinclude.m4.in: fixed some things in the MOC test * acinclude.m4.in: fixed this damn msgfmt test 1998-06-02 Stephan Kulow * acinclude.m4.in: ignore msgfmt, if not GNU gettext 1998-05-28 Stephan Kulow * acinclude.m4.in: fixed KDE_CHECK_STL. Checks for HP and SGI type * acinclude.m4.in: embraced every variable with "" to make it consistent * acinclude.m4.in: various fixes for the koffice checks (mico, ministl and python) 1998-05-16 Stephan Kulow * acinclude.m4.in: don't use KDE_CHECK_QT_DIRECT, when --with-qt-libs are given 1998-04-21 Stephan Kulow * acinclude.m4.in: cool, I found the trick to suppress the ls errors 1998-04-20 Stephan Kulow * acinclude.m4.in: rewrote the qt checking test, since it didn't work under FreeBSD, since it relied on the .so link. The new version is a little bit buggy, but I need some testing to make it perfect * acinclude.m4.in: fixed the side effects of the PAM test 1998-04-18 Stephan Kulow * acinclude.m4.in: hopefully fixed the PAM test (I rewrote it) 1998-04-16 Stephan Kulow * acinclude.m4.in: extended the getsockname test inspired by a patch by Martin Baulig * configure.in: added test for utmp file * acinclude.m4.in: made --without-pam default 1998-04-06 Stephan Kulow * acinclude.m4.in: don't test compiling, linking, running in one step. This proved to be too dangerous for my mail box. 1998-03-21 Stephan Kulow * libtool.m4.in: created some new macros to work around this ugly (because long) help of configure --enable-shared/static 1998-03-05 Stephan Kulow * acinclude.m4.in: set language to C++ before trying the ksize_t test * configure.in: sorted the Makefile entries alphabeticly (and all together: we love xemacs! we love xemacs! ;) * configure.in: added sk * acinclude.m4.in: substitute x_libraries to fix the empty -rpath 1998-03-03 Stephan Kulow * acinclude.m4.in: add a rpath for every shared library, that is linked too (especially X11 libraries) Tue Feb 24 22:04:59 1998 Stephan Kulow * acinclude.m4.in: added kde_sounddir and set kde_minidir to kde_icondir/mini to break not too much Sun Feb 15 18:25:50 1998 Stephan Kulow * configure.in: added bugfix by Bob Miller (correct reset of IFS) Wed Feb 11 00:53:11 1998 Stephan Kulow * configure.in: made shadow under Linux default, since the binaries will work also under non-shadow systems. The only problem left is PAM, so I disabled shadow in case, PAM is present Tue Feb 10 16:46:32 1998 Stephan Kulow * configure.in: added test for nice to find out, if the option -nice works for the screensavers * acinclude.m4.in: port to LynxOS. For this I moved all library search routines in KDE_MISC_TESTS, so I don't need to write this in every package * README: some grammar fixes * acinclude.m4.in: search for the libs in the exec_prefix, when it's present Sun Feb 8 14:07:23 1998 Stephan Kulow * acinclude.m4.in: updated all packages * libtool.m4.in: applied patch for libtool.m4.in to show the correct default for shared and static Sat Feb 7 10:56:00 1998 Stephan Kulow * configure.in: good news - KDE is relocatable again. * libtool.m4.in: updated to latest libtool 1.0i Fri Feb 6 21:26:51 1998 Stephan Kulow * acinclude.m4.in: added a AC_PROVIDE for AC_PROG_CC and AC_PROG_CPP to KDE_CHECK_COMPILERS Thu Feb 5 16:27:47 1998 Stephan Kulow * acinclude.m4.in: put $QTDIR/bin before /usr/bin in the path to look for moc. I don't know why, but I got a report, that configure found /usr/bin/moc under Solaris Fri Jan 30 15:47:50 1998 Stephan Kulow * acinclude.m4.in: export LIBRARY_PATH after reset to the saved value * acinclude.m4.in: unset the LIBRARY_PATH to get a relieable result when trying to find, if Qt compiles without -L Sat Jan 24 00:45:52 1998 Stephan Kulow * acinclude.m4.in: fixed another bug in AC_PATH_KDE Thu Jan 22 14:46:15 1998 Stephan Kulow * configure.in: fixed an ugly bug in AC_BASE_PATH_KDE * kappfinder/kappfinder.in: let kappfinder create by configure to allow the use of the kde_ paths Wed Jan 21 22:19:35 1998 Stephan Kulow * acinclude.m4.in: - added a install_root prefix to all paths, if set, to enable package managers to move the whole installation at once - added --with-install-root to set the install_root prefix Tue Jan 20 22:41:04 1998 Stephan Kulow * configure.in: added NOOPT_CXXFLAGS to allow kioslave to be compiled without -O2 Mon Jan 19 21:55:21 1998 Stephan Kulow * configure.in: some little fixes for the Makefiles * acinclude.m4.in: --prefix will no longer override the search for libraries. If they are present somewhere, they are used (through the methodes in KApplication) Mon Jan 12 00:30:36 1998 Stephan Kulow * acinclude.m4.in fixed an ugly bug, that accoured, when qt_libraries is not set (empty/equals X11/not necessary) * acinclude.m4.in moved the remove of the files after the error detection Sun Jan 11 17:27:53 1998 Stephan Kulow * acinclude.m4.in added a new macro KDE_CHECK_QT_DIRECT to unset the Qt library path, if a Qt program compiles without them * acinclude.m4.in added a return value in the CREATE_KFSSTND macro. Perhaps this has caused the problems Sat Jan 10 17:40:44 1998 Stephan Kulow * ChangeLog started to maintain a ChangeLog file again * acinclude.m4.in the AC_CREATE_KFSSTND to get better debug output to find the problem Old logs, Stephan Kulow made: 0.1 : first steps with libkde 0.2 : first release with libkde, khtmlw, kdehelp, acli, kwm, kpanel 0.3 : added kfm and bugfixes 0.4 : updated khtmlw, kdehelp, kwm, changed install in all subdirs 0.5 : support libtool (chooseable shared libs) 0.6 : split libkde in kdecore and kdeui 0.6.1 : Bugfixes 0.7 : added code from Janos Farkas (configure) : added @{kde,qt}_{includes,libraries}@ 0.7.1: Bugfixes 0.7.2: Bugfixes 0.7.3: added @all_includes@ and @all_libraries@ replaced all incompatible flags like $(CC) and -DHAVE_UNISTD_H 0.7.4: changed support for libkde (back in it's own) added kpat updated kpanel, kwm, kghostview 0.8: removed a bug in kghostview lifted installation process of several apps splitt kdebase into kdelibs and kdeapps updated khtmlw, kfm and kdehelp added kcalc and kpaint updated kdisplay added kscreensaver added --enable-kscreensaver added --enable-debug (and @CXXFLAGS@ to all Makefile.ins) updated kwm to 0.4.7 added make uninstall to every app added kvt added khexdit added .kdelnk for kmines, kedit, ktetris put kwm, kfind's .kdelnk in the right directories replaced --enable-kscreensaver by --disable-kscreensaver updated kpanel to 0.15 some bugfixes (thanks Marco) some bugfixes (thanks Martin) changed acinclude.m4, because aclocal won't updated kwm to 0.4.8 (patched it again for Qt-1.2) updated kvt to 0.13 (patch from Matthias) patched kvt and kwm updated kwm to 0.5.0 updated kvt for 0.14 (again and again :-) updated kview to 0.10 updated kfm to 0.6.3 patched kscreensaver for FreeBSD (thanks Marc) 0.9: updated kdisplay to 0.5.3 added klogout patches from Matthias updated kfm to 0.6.4 updated kghostview to 0.4 added QTINC and QTLIB updated kdehelp to 0.4.11 patched kfm to support ktoolbar updated kedit to kedit+ added kfontmanager 0.2.1 0.9.1: changed kpaint's make style bugfixing updated kmines to 0.6.5 updated ktetris to 0.2.4 changed to Makefiles to depend on Makefile.in changed the Makefiles to let install depend on all added kjots-0.2.2 updated kjots-0.2.3 updated kfm to 0.6.6 updated kjots-0.2.4 updated kpaint-0.2 updated kedit to 0.5 updated kfontmanager to 0.2.2 updated kfm to 0.6.7 updated ktetris to 0.2.5 updated kjots to 0.2.5 0.10: added HAVE_SQRTL added HAVE_CRYPT_H updated kfind updated kfm to kfm-0.8.1 re-introduced automake to kdebase bugfixes for the configure.in added XPM, GL and PAM tests to configure added morph3d to kscreensavers updated kfind to 0.3.2 added some patches for SGI ... lost the time to maintain a Changelog ;) kdocumenteditor-1.0/admin/compile0100755000076400007640000000532607735744575017213 0ustar tasukuhomeuser#! /bin/sh # Wrapper for compilers which do not understand `-c -o'. # Copyright 1999, 2000 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Usage: # compile PROGRAM [ARGS]... # `-o FOO.o' is removed from the args passed to the actual compile. prog=$1 shift ofile= cfile= args= while test $# -gt 0; do case "$1" in -o) # configure might choose to run compile as `compile cc -o foo foo.c'. # So we do something ugly here. ofile=$2 shift case "$ofile" in *.o | *.obj) ;; *) args="$args -o $ofile" ofile= ;; esac ;; *.c) cfile=$1 args="$args $1" ;; *) args="$args $1" ;; esac shift done if test -z "$ofile" || test -z "$cfile"; then # If no `-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. exec "$prog" $args fi # Name of file we expect compiler to create. cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d while true; do if mkdir $lockdir > /dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir $lockdir; exit 1" 1 2 15 # Run the compile. "$prog" $args status=$? if test -f "$cofile"; then mv "$cofile" "$ofile" fi rmdir $lockdir exit $status kdocumenteditor-1.0/admin/config.guess0100755000076400007640000011313407735744575020152 0ustar tasukuhomeuser#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002 Free Software Foundation, Inc. timestamp='2002-01-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi dummy=dummy-$$ trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int dummy(){}" > $dummy.c ; for c in cc gcc c89 ; do ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; if test $? = 0 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; rm -f $dummy.c $dummy.o $dummy.rel ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". UNAME_MACHINE_ARCH=`(uname -p) 2>/dev/null` || \ UNAME_MACHINE_ARCH=unknown case "${UNAME_MACHINE_ARCH}" in arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; macppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mipseb-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. cat <$dummy.s .data \$Lformat: .byte 37,100,45,37,120,10,0 # "%d-%x\n" .text .globl main .align 4 .ent main main: .frame \$30,16,\$26,0 ldgp \$29,0(\$27) .prologue 1 .long 0x47e03d80 # implver \$0 lda \$2,-1 .long 0x47e20c21 # amask \$2,\$1 lda \$16,\$Lformat mov \$0,\$17 not \$1,\$18 jsr \$26,printf ldgp \$29,0(\$26) mov 0,\$16 jsr \$26,exit .end main EOF eval $set_cc_for_build $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then case `./$dummy` in 0-0) UNAME_MACHINE="alpha" ;; 1-0) UNAME_MACHINE="alphaev5" ;; 1-1) UNAME_MACHINE="alphaev56" ;; 1-101) UNAME_MACHINE="alphapca56" ;; 2-303) UNAME_MACHINE="alphaev6" ;; 2-307) UNAME_MACHINE="alphaev67" ;; 2-1307) UNAME_MACHINE="alphaev68" ;; esac fi rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD $dummy.c -o $dummy \ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi rm -f $dummy.c $dummy fi ;; esac echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*X-MP:*:*:*) echo xmp-cray-unicos exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3D:*:*:*) echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; x86:Interix*:3*) echo i386-pc-interix3 exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i386-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` rm -f $dummy.c test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Export LANG=C to prevent ld from outputting information in other # languages. ld_supported_targets=`LANG=C; export LANG; cd /; ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #ifdef __INTEL_COMPILER LIBC=gnu #else LIBC=gnuaout #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` rm -f $dummy.c test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) echo `uname -p`-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) if test "${UNAME_MACHINE}" = "x86pc"; then UNAME_MACHINE=pc fi echo `uname -p`-${UNAME_MACHINE}-nto-qnx exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: kdocumenteditor-1.0/admin/config.sub0100755000076400007640000007045307735744575017623 0ustar tasukuhomeuser#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002 Free Software Foundation, Inc. timestamp='2002-01-02' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit 0;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ | d10v | d30v | dsp16xx \ | fr30 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | m32r | m68000 | m68k | m88k | mcore \ | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el | mips64vr4300 \ | mips64vr4300el | mips64vr5000 | mips64vr5000el \ | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ | mipsisa32 \ | mn10200 | mn10300 \ | ns16k | ns32k \ | openrisc \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | sh | sh[34] | sh[34]eb | shbe | shle \ | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armv*-* \ | avr-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c54x-* \ | clipper-* | cray2-* | cydra-* \ | d10v-* | d30v-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | m32r-* \ | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \ | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* \ | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* | xstormy16-* \ | xtensa-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | ymp) basic_machine=ymp-cray os=-unicos ;; cray2) basic_machine=cray2-cray os=-unicos ;; [cjt]90) basic_machine=${basic_machine}-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mipsel*-linux*) basic_machine=mipsel-unknown os=-linux-gnu ;; mips*-linux*) basic_machine=mips-unknown os=-linux-gnu ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; mmix*) basic_machine=mmix-knuth os=-mmixware ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon) basic_machine=i686-pc ;; pentiumii | pentium2) basic_machine=i686-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=t3e-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; windows32) basic_machine=i386-pc os=-windows32-msvcrt ;; xmp) basic_machine=xmp-cray os=-unicos ;; xps | xps100) basic_machine=xps100-honeywell ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; mips) if [ x$os = x-linux-gnu ]; then basic_machine=mips-unknown else basic_machine=mips-mips fi ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh3 | sh4 | sh3eb | sh4eb) basic_machine=sh-unknown ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; c4x*) basic_machine=c4x-none os=-coff ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* | -morphos*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto*) os=-nto-qnx ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: kdocumenteditor-1.0/admin/depcomp0100755000076400007640000002752507735744575017217 0ustar tasukuhomeuser#! /bin/sh # depcomp - compile a program generating dependencies as side-effects # Copyright 1999, 2000 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # `libtool' can also be set to `yes' or `no'. depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. This file always lives in the current directory. # Also, the AIX compiler puts `$object:' at the start of each line; # $object doesn't have directory information. stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` tmpdepfile="$stripped.u" outname="$stripped.o" if test "$libtool" = yes; then "$@" -Wc,-M else "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; tru64) # The Tru64 AIX compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. tmpdepfile1="$object.d" tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` if test "$libtool" = yes; then "$@" -Wc,-MD else "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi if test -f "$tmpdepfile1"; then tmpdepfile="$tmpdepfile1" else tmpdepfile="$tmpdepfile2" fi if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a space and a tab in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. test -z "$dashmflag" && dashmflag=-M ( IFS=" " case " $* " in *" --mode=compile "*) # this is libtool, let us make it quiet for arg do # cycle over the arguments case "$arg" in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) # X makedepend ( shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift;; -*) ;; *) set fnord "$@" "$arg"; shift;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tail +3 "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the proprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. ( IFS=" " case " $* " in *" --mode=compile "*) for arg do # cycle over the arguments case $arg in "--mode=compile") # insert --quiet before "--mode=compile" set fnord "$@" --quiet shift # fnord ;; esac set fnord "$@" "$arg" shift # fnord shift # "$arg" done ;; esac "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ) & proc=$! "$@" stat=$? wait "$proc" if test "$stat" != 0; then exit $stat; fi rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 kdocumenteditor-1.0/admin/install-sh0100755000076400007640000001273607735744575017644 0ustar tasukuhomeuser#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: chmodcmd="" else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 kdocumenteditor-1.0/admin/ltcf-c.sh0120777000076400007640000000000007742332225021571 2old-ltcf-c.shustar tasukuhomeuserkdocumenteditor-1.0/admin/missing0100755000076400007640000002123107735744575017225 0ustar tasukuhomeuser#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing 0.3 - GNU automake" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar ${1+"$@"} && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar ${1+"$@"} && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" ${1+"$@"} && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 kdocumenteditor-1.0/admin/mkinstalldirs0100755000076400007640000000132507735744575020436 0ustar tasukuhomeuser#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.8 2001/10/05 00:46:36 mueller Exp $ errstatus=0 for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr fi fi pathcomp="$pathcomp/" done done exit $errstatus # mkinstalldirs ends here kdocumenteditor-1.0/admin/ylwrap0100755000076400007640000000764407735744575017106 0ustar tasukuhomeuser#! /bin/sh # ylwrap - wrapper for lex/yacc invocations. # Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Usage: # ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]... # * INPUT is the input file # * OUTPUT is file PROG generates # * DESIRED is file we actually want # * PROGRAM is program to run # * ARGS are passed to PROG # Any number of OUTPUT,DESIRED pairs may be used. # The input. input="$1" shift case "$input" in [\\/]* | ?:[\\/]*) # Absolute path; do nothing. ;; *) # Relative path. Make it absolute. input="`pwd`/$input" ;; esac # The directory holding the input. input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'` # Quote $INPUT_DIR so we can use it in a regexp. # FIXME: really we should care about more than `.' and `\'. input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'` echo "got $input_rx" pairlist= while test "$#" -ne 0; do if test "$1" = "--"; then shift break fi pairlist="$pairlist $1" shift done # The program to run. prog="$1" shift # Make any relative path in $prog absolute. case "$prog" in [\\/]* | ?:[\\/]*) ;; *[\\/]*) prog="`pwd`/$prog" ;; esac # FIXME: add hostname here for parallel makes that run commands on # other machines. But that might take us over the 14-char limit. dirname=ylwrap$$ trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15 mkdir $dirname || exit 1 cd $dirname $prog ${1+"$@"} "$input" status=$? if test $status -eq 0; then set X $pairlist shift first=yes # Since DOS filename conventions don't allow two dots, # the DOS version of Bison writes out y_tab.c instead of y.tab.c # and y_tab.h instead of y.tab.h. Test to see if this is the case. y_tab_nodot="no" if test -f y_tab.c || test -f y_tab.h; then y_tab_nodot="yes" fi while test "$#" -ne 0; do from="$1" # Handle y_tab.c and y_tab.h output by DOS if test $y_tab_nodot = "yes"; then if test $from = "y.tab.c"; then from="y_tab.c" else if test $from = "y.tab.h"; then from="y_tab.h" fi fi fi if test -f "$from"; then # If $2 is an absolute path name, then just use that, # otherwise prepend `../'. case "$2" in [\\/]* | ?:[\\/]*) target="$2";; *) target="../$2";; esac # Edit out `#line' or `#' directives. We don't want the # resulting debug information to point at an absolute srcdir; # it is better for it to just mention the .y file with no # path. sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$? else # A missing file is only an error for the first file. This # is a blatant hack to let us support using "yacc -d". If -d # is not specified, we don't want an error when the header # file is "missing". if test $first = yes; then status=1 fi fi shift shift first=no done else status=$? fi # Remove the directory. cd .. rm -rf $dirname exit $status kdocumenteditor-1.0/admin/CVS/0040755000076400007640000000000007735744561016260 5ustar tasukuhomeuserkdocumenteditor-1.0/admin/CVS/Root0100644000076400007640000000005507735744575017130 0ustar tasukuhomeuser:pserver:anonymous@anoncvs.kde.org:/home/kde kdocumenteditor-1.0/admin/CVS/Repository0100644000076400007640000000002107735744575020355 0ustar tasukuhomeuserkde-common/admin kdocumenteditor-1.0/admin/CVS/Entries0100644000076400007640000000304307735744575017616 0ustar tasukuhomeuser/ChangeLog/1.116/Wed Nov 7 11:17:28 2001//TKDE_3_0_5A_RELEASE /Makefile.common/1.147.2.5/Mon Dec 16 02:08:27 2002//TKDE_3_0_5A_RELEASE /acinclude.m4.in/2.222.2.8/Tue Dec 17 03:04:16 2002//TKDE_3_0_5A_RELEASE /am_edit/1.305.2.2/Mon Dec 9 05:11:27 2002//TKDE_3_0_5A_RELEASE /conf.change.pl/1.9/Fri Mar 22 21:39:12 2002//TKDE_3_0_5A_RELEASE /config.guess/1.16/Fri Jan 25 13:23:20 2002//TKDE_3_0_5A_RELEASE /config.pl/1.16/Fri Mar 22 21:39:12 2002//TKDE_3_0_5A_RELEASE /config.sub/1.18/Fri Jan 25 13:23:21 2002//TKDE_3_0_5A_RELEASE /configure.in.min/1.11/Wed Nov 7 11:17:28 2001//TKDE_3_0_5A_RELEASE /debianrules/1.104.2.2/Mon Apr 22 04:29:19 2002//TKDE_3_0_5A_RELEASE /depcomp/1.5.8.1/Fri Apr 19 17:03:21 2002//TKDE_3_0_5A_RELEASE /install-sh/1.7/Wed Apr 4 10:19:47 2001//TKDE_3_0_5A_RELEASE /libtool.m4.in/1.70.2.3/Sat Jul 13 19:47:51 2002//TKDE_3_0_5A_RELEASE /ltconfig/1.60/Mon Mar 11 10:27:00 2002//TKDE_3_0_5A_RELEASE /ltmain.sh/1.59.2.1/Fri Apr 19 17:05:01 2002//TKDE_3_0_5A_RELEASE /missing/1.6/Fri Oct 5 00:46:36 2001//TKDE_3_0_5A_RELEASE /mkinstalldirs/1.8/Fri Oct 5 00:46:36 2001//TKDE_3_0_5A_RELEASE /old-libtool.m4.in/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /old-ltcf-c.sh/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /old-ltcf-cxx.sh/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /old-ltcf-gcj.sh/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /old-ltconfig/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /old-ltmain.sh/1.1/Sat Mar 9 15:03:33 2002//TKDE_3_0_5A_RELEASE /ylwrap/1.5/Fri Oct 5 00:46:36 2001//TKDE_3_0_5A_RELEASE D kdocumenteditor-1.0/admin/CVS/Tag0100644000076400007640000000002407735744575016714 0ustar tasukuhomeuserNKDE_3_0_5A_RELEASE kdocumenteditor-1.0/admin/Doxyfile.am0100644000076400007640000001554007735744575017736 0ustar tasukuhomeuser## generate API documentation with doxygen apidox-am-yes: @if test "$(subdir)" != "."; then \ $(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\ if test ! -x $(top_builddir)/apidocs/common; then \ if test -d $(top_srcdir)/doc/common; then \ common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ else \ common_dir=$(kde_libs_htmldir)/en/common ;\ fi ;\ $(LN_S) $$common_dir $(top_builddir)/apidocs/common; \ fi ;\ cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ echo "PROJECT_NAME = \"$(subdir) Library\"" >> Doxyfile; \ echo "PROJECT_NUMBER = \"Version $(VERSION)\"" >> Doxyfile; \ echo "INPUT = $(srcdir)" >> Doxyfile; \ echo "IMAGE_PATH = $(top_srcdir)/doc/api" >> Doxyfile ;\ echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile; \ echo "HTML_OUTPUT = $(subdir)/html" >> Doxyfile; \ echo "LATEX_OUTPUT = $(subdir)/latex" >> Doxyfile; \ echo "RTF_OUTPUT = $(subdir)/rtf" >> Doxyfile; \ echo "MAN_OUTPUT = $(subdir)/man" >> Doxyfile; \ echo "GENERATE_HTML = $(GENERATE_FLAG)" >> Doxyfile ;\ echo "GENERATE_MAN = $(GENERATE_FLAG)" >> Doxyfile ;\ echo "GENERATE_LATEX = $(GENERATE_FLAG)" >> Doxyfile ;\ if test -n "$(DOXYGEN_EXCLUDE)"; then \ echo "EXCLUDE_PATTERNS += $(DOXYGEN_EXCLUDE)" >> Doxyfile; \ fi ;\ echo "TAGFILES = \\" >> Doxyfile; \ tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \ tagpath= ;\ path="../../$$tag" ;\ if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \ tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\ else \ tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\ if test -n "$$tagpath"; then \ path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\ fi ;\ fi ;\ if test "$$tag" = qt; then \ echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\ else if test -n "$$tagpath"; then \ echo "$$tagpath=$$path/html \\" >> Doxyfile ;\ fi ;\ fi ;\ done ;\ echo "GENERATE_TAGFILE = $(top_builddir)/apidocs/$(subdir)/$(subdir).tag" >> Doxyfile ;\ echo "IGNORE_PREFIX = K" >> Doxyfile ;\ echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\ $(DOXYGEN) Doxyfile ;\ fi apidox-am-no: install-data-local: install-apidox ## install API documentation install-apidox: @if test "$(subdir)" != "."; then \ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ fi; \ if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ for file in $$list; do \ echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ done; \ fi; \ rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ $(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ else\ if test -d $(top_builddir)/apidocs; then \ $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ list=`cd $(top_builddir)/apidocs && ls -1`; \ for file in $$list; do \ if test -f $(top_builddir)/apidocs/$$file; then \ echo $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ fi; \ done ; fi; \ fi uninstall-local: uninstall-apidox ## uninstall API documentation uninstall-apidox: @if test "$(subdir)" != "."; then \ if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ fi\ else\ if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ fi\ fi apidox: @if test "$(subdir)" != "."; then \ $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ else \ $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ fi @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ list='$(SUBDIRS)'; \ for subdir in $$list; do \ if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ echo "Making apidox in $$subdir"; \ if test "$$subdir" != "."; then \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \ fi ; fi ;\ done; \ for subdir in $$list; do \ if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ echo "Making apidox in $$subdir"; \ if test "$$subdir" != "."; then \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \ fi ; fi ;\ done; \ fi apidox-am-toplevel-no: apidox-am-toplevel-yes: @echo "*** Creating API documentation main page"; \ cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ echo "PROJECT_NAME = $(DOXYGEN_PROJECT_NAME)" >> Doxyfile ; \ echo "PROJECT_NUMBER = $(DOXYGEN_PROJECT_NUMBER)" >> Doxyfile ; \ echo "INPUT = $(top_srcdir)" >> Doxyfile ; \ echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile ; \ echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \ echo "RECURSIVE = NO" >> Doxyfile ; \ echo "SOURCE_BROWSER = NO" >> Doxyfile ; \ echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \ echo "HTML_OUTPUT = ." >> Doxyfile ; \ echo "HTML_HEADER = apidocs/common/mainheader.html" >> Doxyfile ; \ echo "HTML_FOOTER = apidocs/common/mainfooter.html" >> Doxyfile ; \ echo "HTML_STYLESHEET = apidocs/common/doxygen.css" >> Doxyfile ; \ echo "GENERATE_LATEX = NO" >> Doxyfile ; \ echo "GENERATE_RTF = NO" >> Doxyfile ; \ echo "GENERATE_MAN = NO" >> Doxyfile ; \ echo "GENERATE_XML = NO" >> Doxyfile ; \ echo "GENERATE_AUTOGEN_DEF = NO" >> Doxyfile ; \ echo "ENABLE_PREPROCESSING = NO" >> Doxyfile ; \ echo "CLASS_DIAGRAMS = NO" >> Doxyfile ; \ echo "HAVE_DOT = NO" >> Doxyfile ; \ echo "GENERATE_HTML = YES" >> Doxyfile ;\ $(mkinstalldirs) $(top_builddir)/apidocs ; \ rm -f $(top_builddir)/apidocs/common ; \ if test -d $(top_srcdir)/doc/common; then \ common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ else \ common_dir=$(kde_libs_htmldir)/en/common ;\ fi ;\ $(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\ doxygen Doxyfile; \ rm -f Doxyfile # Local Variables: # mode: makefile # End: kdocumenteditor-1.0/admin/Doxyfile.global0100644000076400007640000011204507735744575020577 0ustar tasukuhomeuser# Doxyfile 1.2.15 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project # # All text after a hash (#) is considered a comment and will be ignored # The format is: # TAG = value [value, ...] # For lists items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (" ") #--------------------------------------------------------------------------- # General configuration options #--------------------------------------------------------------------------- # The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. PROJECT_NAME = # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or # if some version control system is used. PROJECT_NUMBER = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. OUTPUT_DIRECTORY = ../apidocs/ # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: # Brazilian, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French, # German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, # Portuguese, Romanian, Russian, Slovak, Slovene, Spanish and Swedish. OUTPUT_LANGUAGE = English # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # documentation are documented, even if no documentation was available. # Private class members and static file members will be hidden unless # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES EXTRACT_ALL = NO # If the EXTRACT_PRIVATE tag is set to YES all private members of a class # will be included in the documentation. EXTRACT_PRIVATE = NO # If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. EXTRACT_STATIC = YES # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # defined locally in source files will be included in the documentation. # If set to NO only classes defined in header files are included. EXTRACT_LOCAL_CLASSES = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members of documented classes, files or namespaces. # If set to NO (the default) these members will be included in the # various overviews, but no documentation section is generated. # This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. # If set to NO (the default) these class will be included in the various # overviews. This option has no effect if EXTRACT_ALL is enabled. HIDE_UNDOC_CLASSES = YES # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # include brief member descriptions after the members that are listed in # the file and class documentation (similar to JavaDoc). # Set to NO to disable this. BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend # the brief description of a member or function before the detailed description. # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the # brief descriptions will be completely suppressed. REPEAT_BRIEF = YES # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # Doxygen will generate a detailed section even if there is only a brief # description. ALWAYS_DETAILED_SEC = YES # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited # members of a class in the documentation of that class as if those members were # ordinary class members. Constructors, destructors and assignment operators of # the base classes will not be shown. INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full # path before files name in the file list and in the header files. If set # to NO the shortest path that makes the file name unique will be used. FULL_PATH_NAMES = NO # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # can be used to strip a user defined part of the path. Stripping is # only done if one of the specified strings matches the left-hand part of # the path. It is allowed to use relative paths in the argument list. STRIP_FROM_PATH = # The INTERNAL_DOCS tag determines if documentation # that is typed after a \internal command is included. If the tag is set # to NO (the default) then the documentation will be excluded. # Set it to YES to include the internal documentation. INTERNAL_DOCS = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code # fragments. Normal C and C++ comments will always remain visible. STRIP_CODE_COMMENTS = YES # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate # file names in lower case letters. If set to YES upper case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # users are adviced to set this option to NO. CASE_SENSE_NAMES = YES # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter # (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. SHORT_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen # will show members with their full class and namespace scopes in the # documentation. If set to YES the scope will be hidden. HIDE_SCOPE_NAMES = NO # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. VERBATIM_HEADERS = YES # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen # will put list of the files that are included by a file in the documentation # of that file. SHOW_INCLUDE_FILES = YES # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # will interpret the first line (until the first dot) of a JavaDoc-style # comment as the brief description. If set to NO, the JavaDoc # comments will behave just like the Qt-style comments (thus requiring an # explict @brief command for a brief description. JAVADOC_AUTOBRIEF = YES # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented # member inherits the documentation from any documented member that it # reimplements. INHERIT_DOCS = YES # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] # is inserted in the documentation for inline members. INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen # will sort the (detailed) documentation of file and class members # alphabetically by member name. If set to NO the members will appear in # declaration order. SORT_MEMBER_DOCS = NO # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES, then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. DISTRIBUTE_GROUP_DOC = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. TAB_SIZE = 4 # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. GENERATE_TODOLIST = NO # The GENERATE_TESTLIST tag can be used to enable (YES) or # disable (NO) the test list. This list is created by putting \test # commands in the documentation. GENERATE_TESTLIST = NO # The GENERATE_BUGLIST tag can be used to enable (YES) or # disable (NO) the bug list. This list is created by putting \bug # commands in the documentation. GENERATE_BUGLIST = YES # This tag can be used to specify a number of aliases that acts # as commands in the documentation. An alias has the form "name=value". # For example adding "sideeffect=\par Side Effects:\n" will allow you to # put the command \sideeffect (or @sideeffect) in the documentation, which # will result in a user defined paragraph with heading "Side Effects:". # You can put \n's in the value part of an alias to insert newlines. # @ref in KDE docu are for kdoc, doxygen doesn't need them, so we alias them # to nothing here ALIASES = libdoc=@mainpage \ sect=

\ reimplemented= \ "deprecated=This class or method is obsolete, it is provided for compatibility only." \ obsolete=@deprecated \ ref= # The ENABLED_SECTIONS tag can be used to enable conditional # documentation sections, marked by \if sectionname ... \endif. ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines # the initial value of a variable or define consist of for it to appear in # the documentation. If the initializer consists of more lines than specified # here it will be hidden. Use a value of 0 to hide initializers completely. # The appearance of the initializer of individual variables and defines in the # documentation can be controlled using \showinitializer or \hideinitializer # command in the documentation regardless of this setting. MAX_INITIALIZER_LINES = 30 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. # For instance some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources # only. Doxygen will then generate output that is more tailored for Java. # For instance namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO # Set the SHOW_USED_FILES tag to NO to disable the list of files generated # at the bottom of the documentation of classes and structs. If set to YES the # list will mention the files that were used to generate the documentation. SHOW_USED_FILES = YES #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated # by doxygen. Possible values are YES and NO. If left blank NO is used. QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are # generated by doxygen. Possible values are YES and NO. If left blank # NO is used. WARNINGS = YES # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings # for undocumented members. If EXTRACT_ALL is set to YES then this flag will # automatically be disabled. WARN_IF_UNDOCUMENTED = NO # The WARN_FORMAT tag determines the format of the warning messages that # doxygen can produce. The string should contain the $file, $line, and $text # tags, which will be replaced by the file and line number from which the # warning originated and the warning text. WARN_FORMAT = # The WARN_LOGFILE tag can be used to specify a file to which warning # and error messages should be written. If left blank the output is written # to stderr. WARN_LOGFILE = #--------------------------------------------------------------------------- # configuration options related to the input files #--------------------------------------------------------------------------- # The INPUT tag can be used to specify the files and/or directories that contain # documented source files. You may enter file names like "myfile.cpp" or # directories like "/usr/src/myproject". Separate the files or directories # with spaces. INPUT = # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp # *.h++ *.idl *.odl FILE_PATTERNS = *.h \ *.cpp \ *.cc \ *.hpp # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. # If left blank NO is used. RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories # that are symbolic links (a Unix filesystem feature) are excluded from the input. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # certain files from those directories. EXCLUDE_PATTERNS = *.moc.* \ moc* \ *.all_cpp.* \ *unload.* \ */test/* \ */tests/* # The EXAMPLE_PATH tag can be used to specify one or more files or # directories that contain example code fragments that are included (see # the \include command). EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank all files are included. EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude # commands irrespective of the value of the RECURSIVE tag. # Possible values are YES and NO. If left blank NO is used. EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or # directories that contain image that are included in the documentation (see # the \image command). IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command , where # is the value of the INPUT_FILTER tag, and is the name of an # input file. Doxygen will then use the output that the filter program writes # to standard output. INPUT_FILTER = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will be used to filter the input files when producing source # files to browse. FILTER_SOURCE_FILES = NO #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- # If the SOURCE_BROWSER tag is set to YES then a list of source files will # be generated. Documented entities will be cross-referenced with these sources. SOURCE_BROWSER = YES # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. INLINE_SOURCES = NO # If the REFERENCED_BY_RELATION tag is set to YES (the default) # then for each documented function all documented # functions referencing it will be listed. REFERENCED_BY_RELATION = YES # If the REFERENCES_RELATION tag is set to YES (the default) # then for each documented function all documented entities # called/used by that function will be listed. REFERENCES_RELATION = YES #--------------------------------------------------------------------------- # configuration options related to the alphabetical class index #--------------------------------------------------------------------------- # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # of all compounds will be generated. Enable this if the project # contains a lot of classes, structs, unions or interfaces. ALPHABETICAL_INDEX = YES # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # in which this list will be split (can be a number in the range [1..20]) COLS_IN_ALPHA_INDEX = 3 # In case all classes in a project start with a common prefix, all # classes will be put under the same header in the alphabetical index. # The IGNORE_PREFIX tag can be used to specify one or more prefixes that # should be ignored while generating the index headers. IGNORE_PREFIX = K #--------------------------------------------------------------------------- # configuration options related to the HTML output #--------------------------------------------------------------------------- # If the GENERATE_HTML tag is set to YES (the default) Doxygen will # generate HTML output. GENERATE_HTML = NO # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `html' will be used as the default path. HTML_OUTPUT = # The HTML_FILE_EXTENSION tag can be used to specify the file extension for # each generated HTML page (for example: .htm,.php,.asp). If it is left blank # doxygen will generate files with .html extension. HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a personal HTML header for # each generated HTML page. If it is left blank doxygen will generate a # standard header. HTML_HEADER = ../apidocs/common/header.html # The HTML_FOOTER tag can be used to specify a personal HTML footer for # each generated HTML page. If it is left blank doxygen will generate a # standard footer. HTML_FOOTER = ../apidocs/common/footer.html # The HTML_STYLESHEET tag can be used to specify a user defined cascading # style sheet that is used by each HTML page. It can be used to # fine-tune the look of the HTML output. If the tag is left blank doxygen # will generate a default style sheet HTML_STYLESHEET = ../apidocs/common/doxygen.css # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # files or namespaces will be aligned in HTML using tables. If set to # NO a bullet list will be used. HTML_ALIGN_MEMBERS = YES # If the GENERATE_HTMLHELP tag is set to YES, additional index files # will be generated that can be used as input for tools like the # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) # of the generated HTML documentation. GENERATE_HTMLHELP = NO # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag # controls if a separate .chi index file is generated (YES) or that # it should be included in the master .chm file (NO). GENERATE_CHI = NO # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag # controls whether a binary table of contents is generated (YES) or a # normal table of contents (NO) in the .chm file. BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members # to the contents of the Html help documentation and to the tree view. TOC_EXPAND = NO # The DISABLE_INDEX tag can be used to turn on/off the condensed index at # top of each HTML page. The value NO (the default) enables the index and # the value YES disables it. DISABLE_INDEX = YES # This tag can be used to set the number of enum values (range [1..20]) # that doxygen will group on one line in the generated HTML documentation. ENUM_VALUES_PER_LINE = 4 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be # generated containing a tree-like index structure (just like the one that # is generated for HTML Help). For this to work a browser that supports # JavaScript and frames is required (for instance Mozilla, Netscape 4.0+, # or Internet explorer 4.0+). Note that for large projects the tree generation # can take a very long time. In such cases it is better to disable this feature. # Windows users are probably better off using the HTML help feature. GENERATE_TREEVIEW = NO # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. TREEVIEW_WIDTH = 250 #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # generate Latex output. GENERATE_LATEX = NO # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `latex' will be used as the default path. LATEX_OUTPUT = # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be invoked. If left blank `latex' will be used as the default command name. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to # generate index for LaTeX. If left blank `makeindex' will be used as the # default command name. MAKEINDEX_CMD_NAME = makeindex # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # LaTeX documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used # by the printer. Possible values are: a4, a4wide, letter, legal and # executive. If left blank a4wide will be used. PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # packages that should be included in the LaTeX output. EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a personal LaTeX header for # the generated latex document. The header should contain everything until # the first chapter. If it is left blank doxygen will generate a # standard header. Notice: only use this tag if you know what you are doing! LATEX_HEADER = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references # This makes the output suitable for online browsing using a pdf viewer. PDF_HYPERLINKS = NO # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # plain latex in the generated Makefile. Set this option to YES to get a # higher quality PDF documentation. USE_PDFLATEX = NO # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. # command to the generated LaTeX files. This will instruct LaTeX to keep # running if errors occur, instead of asking the user for help. # This option is also used when generating formulas in HTML. LATEX_BATCHMODE = NO #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # The RTF output is optimised for Word 97 and may not look very pretty with # other RTF readers or editors. GENERATE_RTF = NO # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `rtf' will be used as the default path. RTF_OUTPUT = # If the COMPACT_RTF tag is set to YES Doxygen generates more compact # RTF documents. This may be useful for small projects and may help to # save some trees in general. COMPACT_RTF = NO # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # will contain hyperlink fields. The RTF file will # contain links (just like the HTML output) instead of page references. # This makes the output suitable for online browsing using WORD or other # programs which support those fields. # Note: wordpad (write) and others do not support links. RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assigments. You only have to provide # replacements, missing definitions are set to their default value. RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an rtf document. # Syntax is similar to doxygen's config file. RTF_EXTENSIONS_FILE = #--------------------------------------------------------------------------- # configuration options related to the man page output #--------------------------------------------------------------------------- # If the GENERATE_MAN tag is set to YES (the default) Doxygen will # generate man pages GENERATE_MAN = NO # The MAN_OUTPUT tag is used to specify where the man pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be # put in front of it. If left blank `man' will be used as the default path. MAN_OUTPUT = # The MAN_EXTENSION tag determines the extension that is added to # the generated man pages (default is the subroutine's section .3) MAN_EXTENSION = .kde3 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, # then it will generate one additional man file for each entity # documented in the real man page(s). These additional files # only source the real man page, but without them the man command # would be unable to find the correct page. The default is NO. MAN_LINKS = YES #--------------------------------------------------------------------------- # configuration options related to the XML output #--------------------------------------------------------------------------- # If the GENERATE_XML tag is set to YES Doxygen will # generate an XML file that captures the structure of # the code including all documentation. Note that this # feature is still experimental and incomplete at the # moment. GENERATE_XML = NO #--------------------------------------------------------------------------- # configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will # generate an AutoGen Definitions (see autogen.sf.net) file # that captures the structure of the code including all # documentation. Note that this feature is still experimental # and incomplete at the moment. GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will # evaluate all C-preprocessor directives found in the sources and include # files. ENABLE_PREPROCESSING = YES # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro # names in the source code. If set to NO (the default) only conditional # compilation will be performed. Macro expansion can be done in a controlled # way by setting EXPAND_ONLY_PREDEF to YES. MACRO_EXPANSION = NO # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # then the macro expansion is limited to the macros specified with the # PREDEFINED and EXPAND_AS_PREDEFINED tags. EXPAND_ONLY_PREDEF = NO # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # in the INCLUDE_PATH (see below) will be search if a #include is found. SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by # the preprocessor. INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the # directories. If left blank, the patterns specified with FILE_PATTERNS will # be used. INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that # are defined before the preprocessor is started (similar to the -D option of # gcc). The argument of the tag is a list of macros of the form: name # or name=definition (no spaces). If the definition and the = are # omitted =1 is assumed. PREDEFINED = QT_VERSION=305 # If the MACRO_EXPANSION and EXPAND_PREDEF_ONLY tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. # The macro definition that is found in the sources will be used. # Use the PREDEFINED tag if you want to use a different macro definition. EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all function-like macros that are alone # on a line and do not end with a semicolon. Such function macros are typically # used for boiler-plate code, and will confuse the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration::addtions related to external references #--------------------------------------------------------------------------- # The TAGFILES tag can be used to specify one or more tagfiles. TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create # a tag file that is based on the input files it reads. GENERATE_TAGFILE = # If the ALLEXTERNALS tag is set to YES all external classes will be listed # in the class index. If set to NO only the inherited external classes # will be listed. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed # in the modules index. If set to NO, only the current project's groups will # be listed. EXTERNAL_GROUPS = NO # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of `which perl'). PERL_PATH = #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or # super classes. Setting the tag to NO turns the diagrams off. Note that this # option is superceded by the HAVE_DOT option below. This is only a fallback. It is # recommended to install and use dot, since it yield more powerful graphs. CLASS_DIAGRAMS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz, a graph visualization # toolkit from AT&T and Lucent Bell Labs. The other options in this section # have no effect if this option is set to NO (the default) HAVE_DOT = NO # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the # the CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect implementation dependencies (inheritance, containment, and # class references variables) of the class with other documented classes. COLLABORATION_GRAPH = YES # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. TEMPLATE_RELATIONS = YES # If set to YES, the inheritance and collaboration graphs will hide # inheritance and usage relations if the target is undocumented # or is not a class. HIDE_UNDOC_RELATIONS = NO # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # tags are set to YES then doxygen will generate a graph for each documented # file showing the direct and indirect include dependencies of the file with # other documented files. INCLUDE_GRAPH = YES # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and # HAVE_DOT tags are set to YES then doxygen will generate a graph for each # documented header file showing the documented files that directly or # indirectly include this file. INCLUDED_BY_GRAPH = YES # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. DOT_IMAGE_FORMAT = png # The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found on the path. DOT_PATH = # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the # \dotfile command). DOTFILE_DIRS = # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_WIDTH = 800 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height # (in pixels) of the graphs generated by dot. If a graph becomes larger than # this value, doxygen will try to truncate the graph, so that it fits within # the specified constraint. Beware that most browsers cannot cope with very # large images. MAX_DOT_GRAPH_HEIGHT = 1024 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # generate a legend page explaining the meaning of the various boxes and # arrows in the dot generated graphs. GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will # remove the intermedate dot files that are used to generate # the various graphs. DOT_CLEANUP = YES #--------------------------------------------------------------------------- # Configuration::addtions related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be # used. If set to NO the values of all tags below this one will be ignored. SEARCHENGINE = NO # The CGI_NAME tag should be the name of the CGI script that # starts the search engine (doxysearch) with the correct parameters. # A script with this name will be generated by doxygen. CGI_NAME = # The CGI_URL tag should be the absolute URL to the directory where the # cgi binaries are located. See the documentation of your http daemon for # details. CGI_URL = # The DOC_URL tag should be the absolute URL to the directory where the # documentation is located. If left blank the absolute path to the # documentation, with file:// prepended to it, will be used. DOC_URL = # The DOC_ABSPATH tag should be the absolute path to the directory where the # documentation is located. If left blank the directory on the local machine # will be used. DOC_ABSPATH = # The BIN_ABSPATH tag must point to the directory where the doxysearch binary # is installed. BIN_ABSPATH = # The EXT_DOC_PATHS tag can be used to specify one or more paths to # documentation generated for other projects. This allows doxysearch to search # the documentation for these projects as well. EXT_DOC_PATHS = kdocumenteditor-1.0/admin/Makefile.common0100644000076400007640000003333507735744575020565 0ustar tasukuhomeuser SHELL=/bin/sh cvs: if test -x /usr/bin/autoconf2.50 ; then \ AUTOCONF="/usr/bin/autoconf2.50" ;\ else \ AUTOCONF="autoconf" ;\ fi; \ AUTOCONF_VERSION=`$$AUTOCONF --version` ;\ if test "x$$AUTOCONF_VERSION" = "xAutoconf version 2.13"; then \ echo "*** YOU'RE USING AUTOCONF 2.13. We suggest updating." ;\ echo "*** autoconf 2.5x works best for now, we will drop" ;\ echo "*** support for autoconf 2.13 soon."; \ test ! -f admin/libtool.m4.in || mv admin/libtool.m4.in admin/new-libtool.m4.in ;\ test ! -f admin/ltmain.sh || mv admin/ltmain.sh admin/new-ltmain.sh ;\ for file in libtool.m4.in ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh ltconfig ltmain.sh; do \ rm -f admin/$$file ;\ ln -s old-$$file admin/$$file ;\ done ;\ fi @if grep '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \ echo "*** Creating acinclude.m4" ;\ rm -f acinclude.m4 configure.files ;\ $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\ fi @echo "!!! If you get recursion errors from autoconf, it is advisable to set the" @echo " environment variable M4 to something including \"--nesting-limit=500\"" @if test -r configure.in.in; then \ rm -f subdirs configure.in ;\ echo "*** Creating list of subdirectories" ;\ $(MAKE) -f Makefile.am top_srcdir=. subdirs ;\ echo "*** Creating configure.in" ;\ $(MAKE) -f Makefile.am top_srcdir=. configure.in ;\ fi @echo "*** Creating aclocal.m4" @aclocal @echo "*** Creating configure" @autoconf @if test -r configure.in.in ; then \ perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\ then\n perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\ || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\ \n rm -f \$$CONFIG_STATUS.bak;\nfi\ \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\ fi @if grep '} \$$ac_kw foo' configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi #David's hack for autoconf bug when $INSTALL is set @perl -pi -e 'if (/\[\/\$$\]\*. INSTALL=/) { print $$_ ; $$_ = "\"\") ;;\n"; }' configure @if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then \ echo "*** Creating config.h template" ;\ autoheader ;\ fi @echo "*** Creating Makefile templates" @automake @echo "*** Postprocessing Makefile templates" @perl admin/am_edit @if egrep "^cvs-local:" Makefile.am >/dev/null; then \ $(MAKE) -f Makefile.am cvs-local ;\ fi @echo "*** Creating date/time stamp" @touch stamp-h.in @echo "*** Finished" @echo " Don't forget to run ./configure" @echo " If you haven't done so in a while, run ./configure --help" dist: @if grep -e '$$(top_srcdir)/acinclude.m4:' Makefile.am >/dev/null; then \ $(MAKE) -f Makefile.am top_srcdir=. acinclude.m4 ;\ fi @if test -r configure.in.in; then \ $(MAKE) -f Makefile.am top_srcdir=. subdirs configure.in; \ fi ;\ aclocal; \ autoheader; \ automake --foreign --include-deps; \ perl admin/am_edit; \ autoconf; \ if test -r configure.in.in ; then \ perl -pi -e 'print "if test \"x\$$with_fast_perl\" = \"xyes\" ;\ then\n perl -i.bak \$$ac_aux_dir/conf.change.pl \$$CONFIG_STATUS\ || mv \$$CONFIG_STATUS.bak \$$CONFIG_STATUS;\ \n rm -f \$$CONFIG_STATUS.bak;\nfi\ \n" if /^\s*chmod\s+.*\+x\s+.*CONFIG_STATUS/;' configure ;\ fi ;\ touch stamp-h.in; \ if grep -e "^cvs-local:" Makefile.am >/dev/null; then \ $(MAKE) -f Makefile.am cvs-local ;\ fi ;\ if grep "ac_kw foo" configure >/dev/null 2>&1; then perl -p -i -e "s/ac_kw foo/ac_kw int foo/" configure; fi ;\ if test -d po; then \ LIST=`find ./po -name "*.po"`; \ for i in $$LIST; do \ file2=`echo $$i | sed -e "s#\.po#\.gmo#"`; \ msgfmt -o $$file2 $$i || touch $$file2; \ done ;\ fi @if grep -e "^cvs-dist-local:" Makefile.am >/dev/null; then \ $(MAKE) -f Makefile.am cvs-dist-local ;\ fi cvs-clean: @if test ! -d CVS; then \ echo "You don't have a toplevel CVS directory."; \ echo "You most certainly didn't use cvs to get these sources."; \ echo "But this function depends on cvs's information."; \ exit 1; \ fi; \ perl -e '\ sub rmrf() \ { \ my $$fn = shift; \ lstat ($$fn); \ if (-d _) { \ if (opendir (DIR, $$fn)) { \ for my $$efn (grep (!/^\.\.?$$/, readdir (DIR))) { \ &rmrf ($$fn."/".$$efn); \ } \ closedir (DIR); \ rmdir ($$fn); \ } \ } else { \ unlink ($$fn); \ } \ } \ \ sub newfiles() \ { \ my ($$indir, $$incvs) = @_; \ for my $$n (keys (%$$incvs)) { delete $$$$indir{$$n} } \ return sort (keys (%$$indir)); \ } \ \ sub cvsclean() \ { \ my $$dir = shift; \ my (%dirsdir, %filesdir, %dirscvs, %filescvs); \ my $$dnam = $$dir ? $$dir : "."; \ if (!opendir (DIR, $$dnam)) { \ print STDERR "Cannot enter \"".$$dnam."\".\n"; \ return; \ } \ for my $$fn (grep (!/^\.\.?$$/, readdir (DIR))) { \ if (-d $$dir.$$fn) { \ $$fn eq "CVS" or $$dirsdir{$$fn} = 1; \ } else { \ $$filesdir{$$fn} = 1; \ } \ } \ closedir (DIR); \ if (!open (FILE, "<".$$dir."CVS/Entries")) { \ print STDERR "No CVS information in \"".$$dnam."\".\n"; \ return; \ } \ while () { \ m%^D/([^/]+)/.*$$% and $$dirscvs{$$1} = 1; \ m%^/([^/]+)/.*$$% and $$filescvs{$$1} = 1; \ } \ close (FILE); \ if (open (FILE, "<".$$dir."CVS/Entries.Log")) { \ while () { \ m%^A D/([^/]+)/.*$$% and $$dirscvs{$$1} = 1; \ m%^A /([^/]+)/.*$$% and $$filescvs{$$1} = 1; \ m%^R D/([^/]+)/.*$$% and delete $$dirscvs{$$1}; \ m%^R /([^/]+)/.*$$% and delete $$filescvs{$$1}; \ } \ close (FILE); \ } \ for my $$fn (&newfiles (\%filesdir, \%filescvs)) { \ print ("F ".$$dir.$$fn."\n"); \ &rmrf ($$dir.$$fn); \ } \ for my $$fn (&newfiles (\%dirsdir, \%dirscvs)) { \ print ("D ".$$dir.$$fn."\n"); \ &rmrf ($$dir.$$fn); \ } \ for my $$fn (sort (keys (%dirscvs))) { \ &cvsclean ($$dir.$$fn."/"); \ } \ } \ \ &cvsclean ("");' # The Makefiles have to be sorted for slashes, since configure creates # only one directory per Makefile not the whole hierarchy configure.in: configure.files $(shell test -f configure.files && cat configure.files) subdirs @rm -f configure.in configure.in.new ;\ kde_use_qt_param= ; \ cat `cat configure.files | egrep -v "^configure.in.bot"` >> configure.in.new ;\ echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new ;\ echo "AC_OUTPUT( \\" >> configure.in.new ;\ mfs=`find . -type d -print | fgrep -v "/." | sed -e "s#\./##" -e "/^debian/d" | sort`; \ for i in $$mfs; do \ topleveldir=`echo $$i| sed -e "s#/.*##"`; \ if test -f $$topleveldir/configure.in; then \ continue; \ fi ;\ if test ! -f $$i/Makefile.am; then \ continue; \ fi ;\ if test -s inst-apps; then \ if test -z "`grep \"^$$topleveldir\" inst-apps`"; then \ continue; \ fi ;\ fi ;\ echo "$$i/Makefile \\" >> configure.in.new ;\ done ;\ egrep '^dnl AC_OUTPUT\(.*\)' `cat configure.files` | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1 \\\\#" >> configure.in.new ;\ echo ")" >> configure.in.new @modulename= ;\ if test -f configure.in.in; then \ if head -2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$$" > /dev/null; then \ line=`egrep "^#MIN_CONFIG\(" configure.in.in` ;\ if test -n "$$line"; then \ kde_use_qt_param=`echo $$line | sed -e "s/#MIN_CONFIG(\(.*\))/\1/"` ;\ fi ;\ fi ;\ if head -2 configure.in.in | egrep "^#MIN_CONFI(G|G\(.*\))$$" > /dev/null; then \ line=`egrep "^AM_INIT_AUTOMAKE\(" configure.in.in` ;\ if test -n "$$line"; then \ modulename=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` ;\ VERSION=`echo $$line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` ;\ fi ;\ sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" configure.in.new > configure.in \ && mv configure.in configure.in.new ;\ fi ;\ fi ;\ if test -z "$$modulename" || test "$$modulename" = "@MODULENAME@"; then \ modulename=`pwd`; modulename=`basename $$modulename`; \ fi ;\ if test -z "$$VERSION" || test "$$VERSION" = "@VERSION@"; then \ VERSION="\"3.0.1\""; \ fi ;\ if test -n "$$kde_use_qt_param"; then \ sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($$kde_use_qt_param)#" configure.in.new > configure.in \ && mv configure.in configure.in.new ;\ fi ; \ sed -e "s#@MODULENAME@#$$modulename#" configure.in.new | \ sed -e "s#@VERSION@#$$VERSION#" > configure.in @if test -f configure.in.bot ; then cat configure.in.bot >> configure.in ; fi @rm -f configure.in.new configure.files: subdirs @admindir=NO ;\ for i in . .. ../.. ../../..; do \ if test -x $$i/admin; then admindir=$$i/admin; break; fi; \ done ;\ rm -rf configure.files ;\ if test -f configure.in.in && head -2 configure.in.in | egrep "^#MIN_CONFI(G|G\(.*\))$$" > /dev/null; then \ echo $$admindir/configure.in.min >> configure.files ;\ fi @test -f configure.in.in && echo configure.in.in >> configure.files @list=`find . -name "configure.in.in" | sort`; \ for i in $$list; do if test -f $$i && test ! `dirname $$i` = "." ; then \ echo $$i >> configure.files ;\ fi; done @if test -f configure.in.mid ; then echo configure.in.mid >> configure.files ; fi @if test -f configure.in.bot ; then echo configure.in.bot >> configure.files ; fi subdirs: @files=`ls -1 | sort`; \ dirs= ;\ lib_dirs= ;\ first_dirs= ;\ last_dirs= ;\ compilefirst=`grep '^COMPILE_FIRST[ ]*=' Makefile.am | \ sed -e 's#^COMPILE_FIRST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\ compilelast=`grep '^COMPILE_LAST[ ]*=' Makefile.am | \ sed -e 's#^COMPILE_LAST[ ]*=[ ]*#|#' | sed -e 's#$$#|#' | sed -e 's# #|#g'`;\ for i in $$files; do if test -d $$i; then \ if test -f $$i/Makefile.am; then \ if echo $$compilefirst | grep "|$$i|" >/dev/null; then \ first_dirs="$$first_dirs $$i" ;\ elif echo $$compilelast | grep "|$$i|" >/dev/null; then \ last_dirs="$$last_dirs $$i" ; \ else dirs="$$dirs $$i" ;\ fi ;\ fi ;\ fi; \ done ;\ rm -f _SUBDIRS ;\ for i in $$dirs; do \ echo $$i >> ./_SUBDIRS; \ done @if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then \ rm -f _SUBDIRS; \ fi @test -r _SUBDIRS && mv _SUBDIRS subdirs || true package-merge: @catalogs='$(POFILES)'; \ for cat in $$catalogs; do \ echo $$cat $$name; \ msgmerge -o $$cat.new $$cat $(PACKAGE).pot ; \ if test -s $$cat.new; then \ grep -v "\"POT-Creation" $$cat.new > $$cat.new.2 ; \ grep -v "\"POT-Creation" $$cat >> $$cat.new.1; \ if diff $$cat.new.1 $$cat.new.2; then \ rm $$cat.new; \ else \ mv $$cat.new $$cat ; \ fi; \ rm -f $$cat.new.1 $$cat.new.2 ;\ fi ;\ done package-messages: @rm -rf po.backup ;\ mkdir po.backup ;\ for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \ egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > po.backup/$$i ; \ cp po/$$i po.backup/backup_$$i ; \ touch -r po/$$i po.backup/backup_$$i ;\ rm po/$$i ;\ done @podir=$${podir:-$$PWD/po} ;\ files=`find . -name Makefile.am | xargs egrep -l '^messages:' `; \ dirs=`for i in $$files; do echo \`dirname $$i\`; done`; \ tmpname="$$PWD/messages.log" ;\ if test -z "$$EXTRACTRC"; then EXTRACTRC=extractrc ; fi ;\ if test -z "$$PREPARETIPS"; then PREPARETIPS=preparetips ; fi ;\ export EXTRACTRC PREPARETIPS ;\ for subdir in $$dirs; do \ test -z "$$VERBOSE" || echo "Making messages in $$subdir"; \ (cd $$subdir ;\ if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then \ $$EXTRACTRC *.rc *.ui > rc.cpp ;\ else \ candidates=`ls -1 *.rc *.ui 2>/dev/null` ;\ if test -n "$$candidates"; then \ echo "$$subdir has *.rc or *.ui files, but not correct messages line" ;\ fi ;\ fi ;\ if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then \ echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp ;\ else echo " " > _translatorinfo.cpp ;\ fi; \ perl -e '$$mes=0; while () { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o \$$\(podir\)/ _translatorinfo.cpp -o \$$\(podir\)/ } print $$_; } else { print $$_; } }' < Makefile.am > _transMakefile ;\ $(MAKE) -s -f _transMakefile podir=$$podir EXTRACTRC="$$EXTRACTRC" PREPARETIPS="$$PREPARETIPS" \ XGETTEXT="$${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n \ -kI18N_NOOP -ktranslate -kaliasLocale \ -x $${includedir:-$$KDEDIR/include}/kde.pot" \ messages ) 2>&1 | grep -v '^make\[1\]' > $$tmpname; \ test -s $$tmpname && (echo $$subdir ; cat $$tmpname) ;\ test ! -f $$subdir/rc.cpp || rm -f $$subdir/rc.cpp ;\ rm -f $$subdir/_translatorinfo.cpp ;\ rm -f $$subdir/_transMakefile ;\ done rm -f $$tmpname @for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do \ if test ! -f po/$$i; then echo "disappeared: $$i"; fi ;\ done @for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do \ msgmerge -q -o po/$$i po/$$i po/$$i ;\ egrep -v '^#([^:]|$)' po/$$i | egrep '^.*[^ ]+.*$$' | grep -v "\"POT-Creation" > temp.pot ;\ if test -f po.backup/$$i && test -n "`diff temp.pot po.backup/$$i`"; then \ echo "will update $$i"; \ msgmerge -q po.backup/backup_$$i po/$$i > temp.pot ;\ mv temp.pot po/$$i; \ else \ if test -f po.backup/backup_$$i; then \ test -z "$$VERBOSE" || echo "I'm restoring $$i" ;\ mv po.backup/backup_$$i po/$$i; \ rm po.backup/$$i; \ else \ echo "will add $$i" ;\ fi ;\ fi ;\ done @rm -f temp.pot @rm -rf po.backup test: perl -e '$$mes=0; while () { if (/^messages:/) { $$mes=1; print $$_; next; } if ($$mes) { if (! /^\t/) { exit(0); } if (/$$\\(XGETTEXT\)/ && / -o/) { s/ -o/ _translatorinfo.cpp -o/ } print $$_; } }' < Makefile.am .SILENT: .PHONY: cvs test dist cvs-clean package-merge package-messages kdocumenteditor-1.0/admin/acinclude.m4.in0100644000076400007640000037252207735744575020440 0ustar tasukuhomeuser## -*- autoconf -*- dnl This file is part of the KDE libraries/packages dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. dnl IMPORTANT NOTE: dnl Please do not modify this file unless you expect your modifications to be dnl carried into every other module in the repository. If you decide that you dnl really want to modify it, contact coolo@kde.org mentioning that you have dnl and that the modified file should be committed to every module. dnl dnl Single-module modifications are best placed in configure.in for kdelibs dnl and kdebase or configure.in.in if present. dnl ------------------------------------------------------------------------ dnl Forward compatibility macros (make autoconf 2.13 look like 2.50), dnl thanks to Raja R Harinath. dnl ------------------------------------------------------------------------ dnl ifdef([_AC_PATH_X_XMKMF],[], [AC_DEFUN([_AC_PATH_X_XMKMF],[AC_PATH_X_XMKMF])]) ifdef([AC_OUTPUT_SUBDIRS],[], [AC_DEFUN([AC_OUTPUT_SUBDIRS],[subdirs=$1; _AC_OUTPUT_SUBDIRS])]) # KDE_PATH_X_DIRECT dnl Internal subroutine of AC_PATH_X. dnl Set ac_x_includes and/or ac_x_libraries. AC_DEFUN(KDE_PATH_X_DIRECT, [if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. AC_TRY_CPP([#include <$x_direct_test_include>], [# We can compile using X headers with no special include directory. ac_x_includes=], [# Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done]) fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" AC_TRY_LINK(, [${x_direct_test_function}()], [LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries=], [LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do dnl Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done]) fi # $ac_x_libraries = NO ]) dnl ------------------------------------------------------------------------ dnl Find a file (or one of more files in a list of dirs) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_FIND_FILE, [ $3=NO for i in $2; do for j in $1; do echo "configure: __oline__: $i/$j" >&AC_FD_CC if test -r "$i/$j"; then echo "taking that" >&AC_FD_CC $3=$i break 2 fi done done ]) dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, dnl if-not-found, test-parameter) AC_DEFUN(KDE_FIND_PATH, [ AC_MSG_CHECKING([for $1]) if test -n "$$2"; then kde_cv_path="$$2"; else kde_cache=`echo $1 | sed 'y%./+-%__p_%'` AC_CACHE_VAL(kde_cv_path_$kde_cache, [ kde_cv_path="NONE" dirs="$3" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/$1"; then if test -n "$5" then evalstr="$dir/$1 $5 2>&1 " if eval $evalstr; then kde_cv_path="$dir/$1" break fi else kde_cv_path="$dir/$1" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" ]) eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then AC_MSG_RESULT(not found) $4 else AC_MSG_RESULT($kde_cv_path) $2=$kde_cv_path fi ]) AC_DEFUN(KDE_MOC_ERROR_MESSAGE, [ AC_MSG_ERROR([No Qt meta object compiler (moc) found! Please check whether you installed Qt correctly. You need to have a running moc binary. configure tried to run $ac_cv_path_moc and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable MOC to the right one before running configure. ]) ]) AC_DEFUN(KDE_UIC_ERROR_MESSAGE, [ AC_MSG_WARN([No Qt ui compiler (uic) found! Please check whether you installed Qt correctly. You need to have a running uic binary. configure tried to run $ac_cv_path_uic and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable UIC to the right one before running configure. ]) ]) AC_DEFUN(KDE_CHECK_UIC_FLAG, [ AC_MSG_CHECKING([whether uic supports -$1 ]) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, [ cat >conftest.ui < EOT ac_uic_testrun="$UIC -$1 $2 conftest.ui >/dev/null" if AC_TRY_EVAL(ac_uic_testrun); then eval "kde_cv_prog_uic_$kde_cache=yes" else eval "kde_cv_prog_uic_$kde_cache=no" fi rm -f conftest* ]) if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then AC_MSG_RESULT([yes]) : $3 else AC_MSG_RESULT([no]) : $4 fi ]) dnl ------------------------------------------------------------------------ dnl Find the meta object compiler and the ui compiler in the PATH, dnl in $QTDIR/bin, and some more usual places dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_MOC_UIC, [ qt_bindirs="" for dir in $kde_qt_dirs; do qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" done qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" if test ! "$ac_qt_bindir" = "NO"; then qt_bindirs="$ac_qt_bindir $qt_bindirs" fi KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) if test -z "$UIC_NOT_NEEDED"; then KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC=""]) if test -z "$UIC" ; then KDE_UIC_ERROR_MESSAGE exit 1 elif test $kde_qtver = 3; then KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) if test x$ac_uic_supports_libpath = xyes; then UIC="$UIC -L \$(kde_widgetdir)" fi if test x$ac_uic_supports_nounload = xyes; then UIC="$UIC -nounload" fi fi else UIC="echo uic not available: " fi AC_SUBST(MOC) AC_SUBST(UIC) UIC_TR="i18n" if test $kde_qtver = 3; then UIC_TR="tr2i18n" fi AC_SUBST(UIC_TR) ]) AC_DEFUN(KDE_1_CHECK_PATHS, [ KDE_1_CHECK_PATH_HEADERS KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi AC_MSG_CHECKING([for KDE libraries installed]) ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if AC_TRY_EVAL(ac_link) && test -s conftest; then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log.]) fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes KDE_SET_PATHS($kde_result) ]) AC_DEFUN(KDE_SET_PATHS, [ kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=$1" ]) AC_DEFUN(KDE_SET_DEFAULT_PATHS, [ if test "$1" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then if test "$kde_qtver" = "2"; then kde_moduledir='\${libdir}/kde2' else kde_moduledir='\${libdir}/kde3' fi fi if test -z "$kde_styledir"; then kde_styledir='\${libdir}/kde3/plugins/styles' fi if test -z "$kde_widgetdir"; then kde_widgetdir='\${libdir}/kde3/plugins/designer' fi KDE_SET_PATHS(defaults) else if test $kde_qtver = 1; then AC_MSG_RESULT([compiling]) KDE_1_CHECK_PATHS else AC_MSG_ERROR([path checking not yet supported for KDE 2]) fi fi ]) AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, [ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test -z "$kde_styledir" || test -z "kde_widgetdir" test "x$kde_have_all_paths" != "xyes"; then kde_have_all_paths=no fi ]) AC_DEFUN(KDE_MISSING_PROG_ERROR, [ AC_MSG_ERROR([The important program $1 was not found! Please check whether you installed KDE correctly. ]) ]) AC_DEFUN(KDE_SUBST_PROGRAMS, [ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" if test -n "$KDEDIRS"; then kde_save_IFS=$IFS IFS=: for dir in $KDEDIRS; do kde_default_bindirs="$dir/bin $kde_default_bindirs " done IFS=$kde_save_IFS fi kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)]) KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)]) KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs]) KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) if test "$KDE_XSL_STYLESHEET" = "NO"; then KDE_XSL_STYLESHEET="" else KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" fi fi DCOP_DEPENDENCIES='$(DCOPIDL)' AC_SUBST(DCOPIDL) AC_SUBST(DCOPIDL2CPP) AC_SUBST(DCOP_DEPENDENCIES) AC_SUBST(MCOPIDL) AC_SUBST(ARTSCCONFIG) AC_SUBST(KDECONFIG) AC_SUBST(MEINPROC) AC_SUBST(KDE_XSL_STYLESHEET) if test -x "$KDECONFIG"; then # it can be "compiled" kde_libs_prefix=`$KDECONFIG --prefix` if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. This means it has been moved since you installed it. This won't work. Please recompile kdelibs for the new prefix. ]) fi kde_libs_htmldir=`$KDECONFIG --install html --expandvars` else kde_libs_prefix='$(prefix)' kde_libs_htmldir='$(kde_htmldir)' fi AC_SUBST(kde_libs_prefix) AC_SUBST(kde_libs_htmldir) ])dnl AC_DEFUN(AC_CREATE_KFSSTND, [ AC_REQUIRE([AC_CHECK_RPATH]) AC_MSG_CHECKING([for KDE paths]) kde_result="" kde_cached_paths=yes AC_CACHE_VAL(kde_cv_all_paths, [ KDE_SET_DEFAULT_PATHS($1) kde_cached_paths=no ]) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then # wrong values were cached, may be, we can set better ones kde_result= kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= kde_have_all_paths= kde_styledir= kde_widgetdir= KDE_SET_DEFAULT_PATHS($1) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS kde_result="$kde_result (cache overridden)" fi if test "$kde_have_all_paths" = "no"; then AC_MSG_ERROR([configure could not run a little KDE program to test the environment. Since it had compiled and linked before, it must be a strange problem on your system. Look at config.log for details. If you are not able to fix this, look at http://www.kde.org/faq/installation.html or any www.kde.org mirror. (If you're using an egcs version on Linux, you may update binutils!) ]) else rm -f conftest* AC_MSG_RESULT($kde_result) fi bindir=$kde_bindir KDE_SUBST_PROGRAMS ]) AC_DEFUN(AC_SUBST_KFSSTND, [ AC_SUBST(kde_htmldir) AC_SUBST(kde_appsdir) AC_SUBST(kde_icondir) AC_SUBST(kde_sounddir) AC_SUBST(kde_datadir) AC_SUBST(kde_locale) AC_SUBST(kde_confdir) AC_SUBST(kde_mimedir) AC_SUBST(kde_wallpaperdir) AC_SUBST(kde_bindir) dnl for KDE 2 AC_SUBST(kde_templatesdir) AC_SUBST(kde_servicesdir) AC_SUBST(kde_servicetypesdir) AC_SUBST(kde_moduledir) AC_SUBST(kde_styledir) AC_SUBST(kde_widgetdir) if test "$kde_qtver" = 1; then kde_minidir="$kde_icondir/mini" else # for KDE 1 - this breaks KDE2 apps using minidir, but # that's the plan ;-/ kde_minidir="/dev/null" fi dnl AC_SUBST(kde_minidir) dnl AC_SUBST(kde_cgidir) dnl AC_SUBST(kde_toolbardir) ]) AC_DEFUN(KDE_MISC_TESTS, [ AC_LANG_C dnl Checks for libraries. AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD AC_SUBST(LIBUTIL) AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD AC_SUBST(LIBCOMPAT) kde_have_crypt= AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ AC_MSG_WARN([you have no crypt in either libcrypt or libc. You should install libcrypt from another source or configure with PAM support]) kde_have_crypt=no ])) AC_SUBST(LIBCRYPT) if test $kde_have_crypt = yes; then AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) fi AC_CHECK_SOCKLEN_T AC_LANG_C AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) if test $ac_cv_lib_dnet_dnet_ntoa = no; then AC_CHECK_LIB(dnet_stub, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) fi AC_CHECK_FUNC(inet_ntoa) if test $ac_cv_func_inet_ntoa = no; then AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") fi AC_CHECK_FUNC(connect) if test $ac_cv_func_connect = no; then AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , $X_EXTRA_LIBS) fi AC_CHECK_FUNC(remove) if test $ac_cv_func_remove = no; then AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. AC_CHECK_FUNC(shmat, , AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) # Solaris 2.6 and others need -lresolv for res_init AC_CHECK_FUNCS(res_init, , [ kde_libs_safe="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS -lresolv" AC_TRY_LINK( [ #include ], [ res_init(); ], LIBRESOLV="-lresolv" X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV" AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) ) LIBS=$kde_libs_safe ]) LIBSOCKET="$X_EXTRA_LIBS" AC_SUBST(LIBSOCKET) AC_SUBST(LIBRESOLV) AC_SUBST(X_EXTRA_LIBS) AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 AC_SUBST(LIBUCB) case $host in dnl this *is* LynxOS specific *-*-lynxos* ) AC_MSG_CHECKING([LynxOS header file wrappers]) [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] AC_MSG_RESULT(disabled) AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS ;; esac KDE_CHECK_TYPES KDE_CHECK_LIBDL ]) dnl ------------------------------------------------------------------------ dnl Find the header files and libraries for X-Windows. Extended the dnl macro AC_PATH_X dnl ------------------------------------------------------------------------ dnl AC_DEFUN(K_PATH_X, [ AC_REQUIRE([KDE_MISC_TESTS])dnl AC_ARG_ENABLE( embedded, [ --enable-embedded link to Qt-embedded, don't use X], kde_use_qt_emb=$enableval, kde_use_qt_emb=no ) AC_ARG_ENABLE( qtopia, [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], kde_use_qt_emb_palm=$enableval, kde_use_qt_emb_palm=no ) if test "$kde_use_qt_emb" = "no"; then AC_MSG_CHECKING(for X) AC_LANG_SAVE AC_LANG_C AC_CACHE_VAL(kde_cv_have_x, [# One or both of the vars are not set, and there is no cached value. if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then kde_x_includes=NO else kde_x_includes=$x_includes fi if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then kde_x_libraries=NO else kde_x_libraries=$x_libraries fi # below we use the standard autoconf calls ac_x_libraries=$kde_x_libraries ac_x_includes=$kde_x_includes KDE_PATH_X_DIRECT dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. dnl Unfortunately, if compiling with the N32 ABI, this is not the correct dnl location. The correct location is /usr/lib32 or an undefined value dnl (the linker is smart enough to pick the correct default library). dnl Things work just fine if you use just AC_PATH_X_DIRECT. dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to dnl /usr/openwin/include, which doesn't work. /usr/include does work, so dnl x_includes should be left alone. case "$host" in mips-sgi-irix6*) ;; *-*-solaris*) ;; *) _AC_PATH_X_XMKMF if test -z "$ac_x_includes"; then ac_x_includes="." fi if test -z "$ac_x_libraries"; then ac_x_libraries="/usr/lib" fi esac #from now on we use our own again # when the user already gave --x-includes, we ignore # what the standard autoconf macros told us. if test "$kde_x_includes" = NO; then kde_x_includes=$ac_x_includes fi # for --x-libraries too if test "$kde_x_libraries" = NO; then kde_x_libraries=$ac_x_libraries fi if test "$kde_x_includes" = NO; then AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) fi if test "$kde_x_libraries" = NO; then AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) fi # Record where we found X for the cache. kde_cv_have_x="have_x=yes \ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" ])dnl eval "$kde_cv_have_x" if test "$have_x" != yes; then AC_MSG_RESULT($have_x) no_x=yes else AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) fi if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then X_INCLUDES="" x_includes="."; dnl better than nothing :- else x_includes=$kde_x_includes X_INCLUDES="-I$x_includes" fi if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then X_LDFLAGS="" x_libraries="/usr/lib"; dnl better than nothing :- else x_libraries=$kde_x_libraries X_LDFLAGS="-L$x_libraries" fi all_includes="$X_INCLUDES" all_libraries="$X_LDFLAGS" AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_libraries) AC_SUBST(x_includes) # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $X_LDFLAGS" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. AC_CHECK_LIB(ICE, IceConnectionNumber, [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) AC_SUBST(LIBSM) LDFLAGS="$ac_save_LDFLAGS" AC_SUBST(X_PRE_LIBS) LIB_X11='-lX11 $(LIBSOCKET)' AC_SUBST(LIB_X11) AC_MSG_CHECKING(for libXext) AC_CACHE_VAL(kde_cv_have_libXext, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" LIBS="-lXext -lX11 $LIBSOCKET" AC_TRY_LINK([ #include #ifdef STDC_HEADERS # include #endif ], [ printf("hello Xext\n"); ], kde_cv_have_libXext=yes, kde_cv_have_libXext=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe ]) AC_MSG_RESULT($kde_cv_have_libXext) if test "$kde_cv_have_libXext" = "no"; then AC_MSG_ERROR([We need a working libXext to proceed. Since configure can't find it itself, we stop here assuming that make wouldn't find them either.]) fi AC_MSG_CHECKING(for Xinerama) AC_ARG_WITH(xinerama, [ --with-xinerama enable support for Xinerama ], [ no_xinerama=no ], [ no_xinerama=yes ] ) kde_save_LDFLAGS="$LDFLAGS" kde_save_CFLAGS="$CFLAGS" kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" CFLAGS="$CFLAGS -I$x_includes" LIBS="-lXinerama -lXext" if test "x$no_xinerama" = "xno"; then AC_CACHE_VAL(ac_cv_have_xinerama, [ AC_TRY_LINK([#include #include ], [XineramaIsActive(NULL);], [ac_cv_have_xinerama="yes"], [ac_cv_have_xinerama="no"]) ]) else ac_cv_have_xinerama=no; fi AC_MSG_RESULT($ac_cv_have_xinerama) LIBXINERAMA="" if test "$ac_cv_have_xinerama" = "yes"; then AC_DEFINE(HAVE_XINERAMA, 1, [Define if you want Xinerama support]) LIBXINERAMA="-lXinerama" fi AC_SUBST(LIBXINERAMA) LDFLAGS="$kde_save_LDFLAGS" CFLAGS="$kde_save_CFLAGS" LIBS="$kde_save_LIBS" LIB_XEXT="-lXext" QTE_NORTTI="" else dnl We're using QT Embedded CXXFLAGS="$CXXFLAGS -fno-rtti -DQWS" CFLAGS="$CFLAGS -DQWS" LDFLAGS="$LDFLAGS -DQWS" QTE_NORTTI="-fno-rtti -DQWS" X_PRE_LIBS="" LIB_X11="" LIB_XEXT="" LIBSM="" X_INCLUDES="" X_LDFLAGS="" x_includes="" x_libraries="" AC_SUBST(X_PRE_LIBS) AC_SUBST(LIB_X11) AC_SUBST(LIBSM) AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_includes) AC_SUBST(x_libraries) fi AC_SUBST(QTE_NORTTI) AC_SUBST(LIB_XEXT) AC_LANG_RESTORE ]) AC_DEFUN(KDE_PRINT_QT_PROGRAM, [ AC_REQUIRE([KDE_USE_QT]) cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi if test "$kde_qtver" = "3"; then cat >> conftest.$ac_ext < #include #include EOF fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" export LD_LIBRARY_PATH LIBRARY_PATH="$ac_LIBRARY_PATH" export LIBRARY_PATH AC_LANG_RESTORE ]) if test "$kde_cv_qt_direct" = "yes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) dnl ------------------------------------------------------------------------ dnl Try to find the Qt headers and libraries. dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_1_3, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([KDE_USE_QT]) dnl ------------------------------------------------------------------------ dnl Add configure flag to enable linking to MT version of Qt library. dnl ------------------------------------------------------------------------ AC_ARG_ENABLE( mt, [ --disable-mt link to non-threaded Qt (deprecated)], kde_use_qt_mt=$enableval, [ if test $kde_qtver = 3; then kde_use_qt_mt=yes else kde_use_qt_mt=no fi ] ) USING_QT_MT="" dnl ------------------------------------------------------------------------ dnl If we not get --disable-qt-mt then adjust some vars for the host. dnl ------------------------------------------------------------------------ KDE_MT_LDFLAGS= KDE_MT_LIBS= if test "x$kde_use_qt_mt" = "xyes"; then KDE_CHECK_THREADING if test "x$kde_use_threading" = "xyes"; then CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" KDE_MT_LDFLAGS="$USE_THREADS" KDE_MT_LIBS="$LIBPTHREAD" else kde_use_qt_mt=no fi fi AC_SUBST(KDE_MT_LDFLAGS) AC_SUBST(KDE_MT_LIBS) kde_qt_was_given=yes dnl ------------------------------------------------------------------------ dnl If we haven't been told how to link to Qt, we work it out for ourselves. dnl ------------------------------------------------------------------------ if test -z "$LIBQT_GLOB"; then if test "x$kde_use_qt_emb" = "xyes"; then LIBQT_GLOB="libqte.*" else LIBQT_GLOB="libqt.*" fi fi if test -z "$LIBQT"; then dnl ------------------------------------------------------------ dnl If we got --enable-embedded then adjust the Qt library name. dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then qtlib="qte" else qtlib="qt" fi kde_int_qt="-l$qtlib" else kde_int_qt="$LIBQT" kde_lib_qt_set=yes fi if test -z "$LIBQPE"; then dnl ------------------------------------------------------------ dnl If we got --enable-palmtop then add -lqpe to the link line dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then if test "x$kde_use_qt_emb_palm" = "xyes"; then LIB_QPE="-lqpe" else LIB_QPE="" fi else LIB_QPE="" fi fi dnl ------------------------------------------------------------------------ dnl If we got --enable-qt-mt then adjust the Qt library name for the host. dnl ------------------------------------------------------------------------ if test "x$kde_use_qt_mt" = "xyes"; then if test -z "$LIBQT"; then LIBQT="-l$qtlib-mt" kde_int_qt="-l$qtlib-mt" else LIBQT="$qtlib-mt" kde_int_qt="$qtlib-mt" fi LIBQT_GLOB="lib$qtlib-mt.*" USING_QT_MT="using -mt" else LIBQT="-l$qtlib" fi if test $kde_qtver != 1; then AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([AC_FIND_JPEG]) LIBQT="$LIBQT $LIBPNG $LIBJPEG" fi if test $kde_qtver = 3; then AC_REQUIRE([KDE_CHECK_LIBDL]) LIBQT="$LIBQT $LIBDL" fi AC_MSG_CHECKING([for Qt]) if test "x$kde_use_qt_emb" != "xyes"; then LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" fi ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO qt_libraries="" qt_includes="" AC_ARG_WITH(qt-dir, [ --with-qt-dir=DIR where the root of Qt is installed ], [ ac_qt_includes="$withval"/include ac_qt_libraries="$withval"/lib ac_qt_bindir="$withval"/bin ]) AC_ARG_WITH(qt-includes, [ --with-qt-includes=DIR where the Qt includes are. ], [ ac_qt_includes="$withval" ]) kde_qt_libs_given=no AC_ARG_WITH(qt-libraries, [ --with-qt-libraries=DIR where the Qt library is installed.], [ ac_qt_libraries="$withval" kde_qt_libs_given=yes ]) AC_CACHE_VAL(ac_cv_have_qt, [#try to guess Qt locations qt_incdirs="" for dir in $kde_qt_dirs; do qt_incdirs="$qt_incdirs $dir/include $dir" done qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes" if test ! "$ac_qt_includes" = "NO"; then qt_incdirs="$ac_qt_includes $qt_incdirs" fi if test "$kde_qtver" != "1"; then kde_qt_header=qstyle.h else kde_qt_header=qglobal.h fi AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) ac_qt_includes="$qt_incdir" qt_libdirs="" for dir in $kde_qt_dirs; do qt_libdirs="$qt_libdirs $dir/lib $dir" done qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" if test ! "$ac_qt_libraries" = "NO"; then qt_libdir=$ac_qt_libraries else qt_libdirs="$ac_qt_libraries $qt_libdirs" # if the Qt was given, the chance is too big that libqt.* doesn't exist qt_libdir=NONE for dir in $qt_libdirs; do try="ls -1 $dir/${LIBQT_GLOB}" if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi done fi ac_qt_libraries="$qt_libdir" AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIBQT $KDE_MT_LIBS" KDE_PRINT_QT_PROGRAM if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else echo "configure: failed program was:" >&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC ac_qt_libraries="NO" fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then ac_cv_have_qt="have_qt=no" ac_qt_notfound="" missing_qt_mt="" if test "$ac_qt_includes" = NO; then if test "$ac_qt_libraries" = NO; then ac_qt_notfound="(headers and libraries)"; else ac_qt_notfound="(headers)"; fi else if test "x$kde_use_qt_mt" = "xyes"; then missing_qt_mt=" Make sure that you have compiled Qt with thread support!" ac_qt_notfound="(library $qtlib-mt)"; else ac_qt_notfound="(library $qtlib)"; fi fi AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! For more details about this problem, look at the end of config.log.$missing_qt_mt]) else have_qt="yes" fi ]) eval "$ac_cv_have_qt" if test "$have_qt" != yes; then AC_MSG_RESULT([$have_qt]); else ac_cv_have_qt="have_qt=yes \ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) qt_libraries="$ac_qt_libraries" qt_includes="$ac_qt_includes" fi if test ! "$kde_qt_libs_given" = "yes"; then KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) fi AC_SUBST(qt_libraries) AC_SUBST(qt_includes) if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then QT_INCLUDES="" else QT_INCLUDES="-I$qt_includes" all_includes="$QT_INCLUDES $all_includes" fi if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then QT_LDFLAGS="" else QT_LDFLAGS="-L$qt_libraries" all_libraries="$all_libraries $QT_LDFLAGS" fi test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" AC_SUBST(QT_INCLUDES) AC_SUBST(QT_LDFLAGS) AC_PATH_QT_MOC_UIC KDE_CHECK_QT_JPEG if test "x$kde_use_qt_emb" != "xyes"; then LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' else LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' fi test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" AC_SUBST(LIB_QT) AC_SUBST(LIB_QPE) AC_SUBST(kde_qtver) ]) AC_DEFUN(AC_PATH_QT, [ AC_PATH_QT_1_3 ]) AC_DEFUN(KDE_CHECK_FINAL, [ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], kde_use_final=$enableval, kde_use_final=no) KDE_COMPILER_REPO if test "x$kde_use_final" = "xyes"; then KDE_USE_FINAL_TRUE="" KDE_USE_FINAL_FALSE="#" else KDE_USE_FINAL_TRUE="#" KDE_USE_FINAL_FALSE="" fi AC_SUBST(KDE_USE_FINAL_TRUE) AC_SUBST(KDE_USE_FINAL_FALSE) AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], kde_use_closure=$enableval, kde_use_closure=yes) if test "x$kde_use_closure" = "xyes"; then KDE_USE_CLOSURE_TRUE="" KDE_USE_CLOSURE_FALSE="#" # CXXFLAGS="$CXXFLAGS $REPO" else KDE_USE_CLOSURE_TRUE="#" KDE_USE_CLOSURE_FALSE="" fi AC_SUBST(KDE_USE_CLOSURE_TRUE) AC_SUBST(KDE_USE_CLOSURE_FALSE) ]) dnl ------------------------------------------------------------------------ dnl Now, the same with KDE dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) dnl and $(kde_includes) will be the kdehdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_BASE_PATH_KDE, [ AC_PREREQ([2.13]) AC_REQUIRE([AC_PATH_QT])dnl AC_CHECK_RPATH AC_MSG_CHECKING([for KDE]) if test "${prefix}" != NONE; then kde_includes=${prefix}/include ac_kde_includes=$prefix/include if test "${exec_prefix}" != NONE; then kde_libraries=${libdir} ac_kde_libraries=$libdir else kde_libraries=${prefix}/lib ac_kde_libraries=$prefix/lib fi else ac_kde_includes= ac_kde_libraries= kde_libraries="" kde_includes="" fi AC_CACHE_VAL(ac_cv_have_kde, [#try to guess kde locations if test "$kde_qtver" = 1; then kde_check_header="ksock.h" kde_check_lib="libkdecore.la" else kde_check_header="ksharedptr.h" kde_check_lib="libkio.la" fi if test -z "$1"; then kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes $includedir" test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" kde_incdirs="$ac_kde_includes $kde_incdirs" AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) ac_kde_includes="$kde_incdir" if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix!]) fi kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib" test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs" kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) ac_kde_libraries="$kde_libdir" if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE libraries installed. This will fail. So, check this please and use another prefix!]) fi ac_kde_libraries="$kde_libdir" if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then ac_cv_have_kde="have_kde=no" else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" fi else dnl test -z $1 ac_cv_have_kde="have_kde=no" fi ])dnl eval "$ac_cv_have_kde" if test "$have_kde" != "yes"; then if test "${prefix}" = NONE; then ac_kde_prefix="$ac_default_prefix" else ac_kde_prefix="$prefix" fi if test "$exec_prefix" = NONE; then ac_kde_exec_prefix="$ac_kde_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix]) else ac_kde_exec_prefix="$exec_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) fi kde_libraries="${libdir}" kde_includes=${ac_kde_prefix}/include else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) kde_libraries="$ac_kde_libraries" kde_includes="$ac_kde_includes" fi AC_SUBST(kde_libraries) AC_SUBST(kde_includes) if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then KDE_INCLUDES="" else KDE_INCLUDES="-I$kde_includes" all_includes="$KDE_INCLUDES $all_includes" fi KDE_LDFLAGS="-L$kde_libraries" if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then all_libraries="$all_libraries $KDE_LDFLAGS" fi AC_SUBST(KDE_LDFLAGS) AC_SUBST(KDE_INCLUDES) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) all_libraries="$all_libraries $USER_LDFLAGS" all_includes="$all_includes $USER_INCLUDES" AC_SUBST(all_includes) AC_SUBST(all_libraries) AC_SUBST(AUTODIRS) ]) AC_DEFUN(KDE_CHECK_EXTRA_LIBS, [ AC_MSG_CHECKING(for extra includes) AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR adds non standard include paths], kde_use_extra_includes="$withval", kde_use_extra_includes=NONE ) kde_extra_includes= if test -n "$kde_use_extra_includes" && \ test "$kde_use_extra_includes" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_includes; do kde_extra_includes="$kde_extra_includes $dir" USER_INCLUDES="$USER_INCLUDES -I$dir" done IFS=$ac_save_ifs kde_use_extra_includes="added" else kde_use_extra_includes="no" fi AC_SUBST(USER_INCLUDES) AC_MSG_RESULT($kde_use_extra_includes) kde_extra_libs= AC_MSG_CHECKING(for extra libs) AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], kde_use_extra_libs=$withval, kde_use_extra_libs=NONE ) if test -n "$kde_use_extra_libs" && \ test "$kde_use_extra_libs" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_libs; do kde_extra_libs="$kde_extra_libs $dir" KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" USER_LDFLAGS="$USER_LDFLAGS -L$dir" done IFS=$ac_save_ifs kde_use_extra_libs="added" else kde_use_extra_libs="no" fi AC_SUBST(USER_LDFLAGS) AC_MSG_RESULT($kde_use_extra_libs) ]) AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, [ AC_MSG_CHECKING([for KDE headers installed]) AC_LANG_SAVE AC_LANG_CPLUSPLUS cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); printf("kde_styledir=\\"/tmp/dummy\\"\n"); printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if AC_TRY_EVAL(ac_compile); then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log.]) fi AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_KDEQTADDON, [ AC_MSG_CHECKING(for kde-qt-addon) AC_CACHE_VAL(kde_cv_have_kdeqtaddon, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" kde_cxxflags_safe="$CXXFLAGS" LIBS="-lkde-qt-addon $LIBQT $LIBS" CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" AC_TRY_LINK([ #include ], [ QDomDocument doc; ], kde_cv_have_kdeqtaddon=yes, kde_cv_have_kdeqtaddon=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe CXXFLAGS=$kde_cxxflags_safe ]) AC_MSG_RESULT($kde_cv_have_kdeqtaddon) if test "$kde_cv_have_kdeqtaddon" = "no"; then AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. It is a separate package (and CVS module) named kde-qt-addon.]) fi ]) AC_DEFUN(KDE_CHECK_KIMGIO, [ AC_REQUIRE([AC_BASE_PATH_KDE]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_TIFF]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) if test "$1" = "existance"; then AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" AC_CHECK_LIB(kimgio, kimgioRegister, [ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) LIBS="$kde_save_LIBS" AC_LANG_RESTORE else LIBKIMGIO_EXISTS=yes fi if test "$LIBKIMGIO_EXISTS" = "yes"; then LIB_KIMGIO='-lkimgio' else LIB_KIMGIO='' fi AC_SUBST(LIB_KIMGIO) ]) AC_DEFUN(KDE_CREATE_LIBS_ALIASES, [ AC_REQUIRE([KDE_MISC_TESTS]) AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([K_PATH_X]) if test $kde_qtver = 3; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) # these are for backward compatibility LIB_KSYCOCA='-lkio' AC_SUBST(LIB_KSYCOCA) LIB_KFILE='-lkio' AC_SUBST(LIB_KFILE) elif test $kde_qtver = 2; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_KSYCOCA='-lksycoca' AC_SUBST(LIB_KSYCOCA) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KFILE='-lkfile' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) else LIB_KDECORE='-lkdecore -lXext $(LIB_QT)' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui $(LIB_KDECORE)' AC_SUBST(LIB_KDEUI) LIB_KFM='-lkfm $(LIB_KDECORE)' AC_SUBST(LIB_KFM) LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)' AC_SUBST(LIB_KAB) fi ]) AC_DEFUN(AC_PATH_KDE, [ AC_BASE_PATH_KDE AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], [ if test "$enableval" = "no"; then ac_use_path_checking="default" else ac_use_path_checking="" fi ], [ if test "$kde_qtver" = 1; then ac_use_path_checking="" else ac_use_path_checking="default" fi ] ) AC_CREATE_KFSSTND($ac_use_path_checking) AC_SUBST_KFSSTND KDE_CREATE_LIBS_ALIASES ]) dnl obsolete AC_DEFUN(AC_CHECK_SETENV, [ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl AC_CHECK_FUNCS([setenv unsetenv]) ]) AC_DEFUN(AC_CHECK_GETDOMAINNAME, [ AC_MSG_CHECKING(for getdomainname) AC_CACHE_VAL(ac_cv_func_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" kde_safe_LIBS="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_COMPILE([ #include #include ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes, ac_cv_func_getdomainname=no) CXXFLAGS="$save_CXXFLAGS" LIBS=$kde_safe_LIBS AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_getdomainname) AC_MSG_CHECKING([if getdomainname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then ac_cv_proto_getdomainname=no else kde_safe_libs=$LIBS LIBS="$LIBS $X_EXTRA_LIBS" AC_TRY_LINK([ #include #include extern "C" int getdomainname (char *, int); ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes ac_cv_proto_getdomainname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR([getdomainname unavailable])) fi LIBS=$kde_safe_libs AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_getdomainname) if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname]) fi if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1, [Define if you have getdomainname prototype]) fi ]) AC_DEFUN(AC_CHECK_GETHOSTNAME, [ AC_MSG_CHECKING([for gethostname]) AC_CACHE_VAL(ac_cv_func_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_LINK([ #include #include ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes, ac_cv_func_gethostname=no) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_gethostname) AC_MSG_CHECKING([if gethostname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then ac_cv_proto_gethostname=no else AC_TRY_LINK([ #include #include extern "C" int gethostname (char *, int); ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes ac_cv_proto_gethostname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR(gethostname unavailable)) fi AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_gethostname) if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1, [Define if you have gethostname prototype]) fi if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have gethostname]) fi ]) AC_DEFUN(AC_CHECK_USLEEP, [ AC_MSG_CHECKING([for usleep]) AC_CACHE_VAL(ac_cv_func_usleep, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include #include ], [ usleep(200); ], ac_cv_func_usleep=yes, ac_cv_func_usleep=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_usleep) if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function]) fi ]) AC_DEFUN(AC_CHECK_RANDOM, [ AC_MSG_CHECKING([for random]) AC_CACHE_VAL(ac_cv_func_random, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include ], [ random(); ], ac_cv_func_random=yes, ac_cv_func_random=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_random) if eval "test \"`echo $ac_cv_func_random`\" = yes"; then AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random]) fi ]) AC_DEFUN(AC_FIND_GIF, [AC_MSG_CHECKING([for giflib]) AC_CACHE_VAL(ac_cv_lib_gif, [ac_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" else LIBS="$all_libraries -lgif" fi AC_TRY_LINK(dnl [ #ifdef __cplusplus extern "C" { #endif int GifLastError(void); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [return GifLastError();], eval "ac_cv_lib_gif=yes", eval "ac_cv_lib_gif=no") LIBS="$ac_save_LIBS" ])dnl if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) else AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) fi ]) AC_DEFUN(KDE_FIND_JPEG_HELPER, [ AC_MSG_CHECKING([for libjpeg$2]) AC_CACHE_VAL(ac_cv_lib_jpeg_$1, [ AC_LANG_C ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [/* Override any gcc2 internal prototype to avoid an error. */ struct jpeg_decompress_struct; typedef struct jpeg_decompress_struct * j_decompress_ptr; typedef int size_t; #ifdef __cplusplus extern "C" { #endif void jpeg_CreateDecompress(j_decompress_ptr cinfo, int version, size_t structsize); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [jpeg_CreateDecompress(0L, 0, 0);], eval "ac_cv_lib_jpeg_$1=-ljpeg$2", eval "ac_cv_lib_jpeg_$1=no") LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" ]) if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_$1" AC_MSG_RESULT($ac_cv_lib_jpeg_$1) else AC_MSG_RESULT(no) $3 fi ]) AC_DEFUN(AC_FIND_JPEG, [ dnl first look for libraries KDE_FIND_JPEG_HELPER(6b, 6b, KDE_FIND_JPEG_HELPER(normal, [], [ LIBJPEG= ] ) ) dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h dnl requires system dependent includes loaded before it) jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes" AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) test "x$jpeg_incdir" = xNO && jpeg_incdir= dnl if headers _and_ libraries are missing, this is no error, and we dnl continue with a warning (the user will get no jpeg support in khtml) dnl if only one is missing, it means a configuration error, but we still dnl only warn if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) else if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then AC_MSG_WARN([ There is an installation error in jpeg support. You seem to have only one of either the headers _or_ the libraries installed. You may need to either provide correct --with-extra-... options, or the development package of libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ Disabling JPEG support. ]) else AC_MSG_WARN([libjpeg not found. disable JPEG support.]) fi jpeg_incdir= LIBJPEG= fi AC_SUBST(LIBJPEG) ]) AC_DEFUN(KDE_CHECK_QT_JPEG, [ AC_MSG_CHECKING([if Qt needs $LIBJPEG]) AC_CACHE_VAL(kde_cv_qt_jpeg, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS $LIBQT" LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [#include ], [ int argc; char** argv; QApplication app(argc, argv);], eval "kde_cv_qt_jpeg=no", eval "kde_cv_qt_jpeg=yes") LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then AC_MSG_RESULT(yes) LIBJPEG_QT='$(LIBJPEG)' else AC_MSG_RESULT(no) LIBJPEG_QT= fi ]) AC_DEFUN(AC_FIND_ZLIB, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for libz]) AC_CACHE_VAL(ac_cv_lib_z, [ AC_LANG_C kde_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (zlibVersion() == ZLIB_VERSION); ], eval "ac_cv_lib_z='-lz'", eval "ac_cv_lib_z=no") LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if test ! "$ac_cv_lib_z" = no; then AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) LIBZ="$ac_cv_lib_z" AC_SUBST(LIBZ) AC_MSG_RESULT($ac_cv_lib_z) else AC_MSG_ERROR(not found. Check your installation and look into config.log) LIBZ="" AC_SUBST(LIBZ) fi ]) AC_DEFUN(KDE_TRY_TIFFLIB, [ AC_MSG_CHECKING([for libtiff $1]) AC_CACHE_VAL(kde_cv_libtiff_$1, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" else LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" fi kde_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (TIFFOpen( "", "r") == 0); ], [ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" ], [ kde_cv_libtiff_$1=no ]) LIBS="$kde_save_LIBS" CXXFLAGS="$kde_save_CXXFLAGS" AC_LANG_RESTORE ]) if test "$kde_cv_libtiff_$1" = "no"; then AC_MSG_RESULT(no) LIBTIFF="" $3 else LIBTIFF="$kde_cv_libtiff_$1" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) $2 fi ]) AC_DEFUN(AC_FIND_TIFF, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([AC_FIND_ZLIB]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) KDE_TRY_TIFFLIB(tiff, [], KDE_TRY_TIFFLIB(tiff34)) AC_SUBST(LIBTIFF) ]) AC_DEFUN(AC_FIND_PNG, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_ZLIB]) AC_MSG_CHECKING([for libpng]) AC_CACHE_VAL(ac_cv_lib_png, [ kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" else LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" fi kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_LANG_C AC_TRY_LINK(dnl [ #include ], [ png_structp png_ptr = png_create_read_struct( /* image ptr */ PNG_LIBPNG_VER_STRING, 0, 0, 0 ); return( png_ptr != 0 ); ], eval "ac_cv_lib_png='-lpng $LIBZ -lm'", eval "ac_cv_lib_png=no" ) LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) LIBPNG="$ac_cv_lib_png" AC_SUBST(LIBPNG) AC_MSG_RESULT($ac_cv_lib_png) else AC_MSG_RESULT(no) LIBPNG="" AC_SUBST(LIBPNG) fi ]) AC_DEFUN(AC_CHECK_BOOL, [ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) ]) AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, [ AC_MSG_CHECKING(if you need GNU extensions) AC_CACHE_VAL(ac_cv_gnu_extensions, [ cat > conftest.c << EOF #include #ifdef __GNU_LIBRARY__ yes #endif EOF if (eval "$ac_cpp conftest.c") 2>&5 | egrep "yes" >/dev/null 2>&1; then rm -rf conftest* ac_cv_gnu_extensions=yes else ac_cv_gnu_extensions=no fi ]) AC_MSG_RESULT($ac_cv_gnu_extensions) if test "$ac_cv_gnu_extensions" = "yes"; then AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) fi ]) AC_DEFUN(KDE_CHECK_COMPILER_FLAG, [ AC_MSG_CHECKING(whether $CXX supports -$1) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -$1" AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then AC_MSG_RESULT(yes) : $2 else AC_MSG_RESULT(no) : $3 fi ]) dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) dnl it's all white-space separated AC_DEFUN(AC_REMOVE_FORBIDDEN, [ __val=$$1 __forbid=" $2 " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS $1=$__new fi ]) dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given AC_DEFUN(AC_VALIDIFY_CXXFLAGS, [dnl if test "x$kde_use_qt_emb" != "xyes"; then AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) else AC_REMOVE_FORBIDDEN(CXX, [-rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) fi ]) AC_DEFUN(AC_CHECK_COMPILERS, [ AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], [ case $enableval in yes) kde_use_debug_code="yes" kde_use_debug_define=no ;; full) kde_use_debug_code="full" kde_use_debug_define=no ;; *) kde_use_debug_code="no" kde_use_debug_define=yes ;; esac ], [kde_use_debug_code="no" kde_use_debug_define=no ]) dnl Just for configure --help AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], [ if test $enableval = "no"; then kde_use_strict_options="no" else kde_use_strict_options="yes" fi ], [kde_use_strict_options="no"]) AC_ARG_ENABLE(warnings,[ --enable-warnings compiles with -Wall and similiar], [ if test $enableval = "no"; then kde_use_warnings="no" else kde_use_warnings="yes" fi ], [kde_use_warnings="no"]) dnl enable warnings for debug build if test "$kde_use_debug_code" != "no"; then kde_use_warnings=yes fi AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], [kde_use_profiling=$enableval], [kde_use_profiling="no"] ) dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS CFLAGS=" $CFLAGS" AC_PROG_CC AC_PROG_CPP if test "$GCC" = "yes"; then if test "$kde_use_debug_code" != "no"; then if test $kde_use_debug_code = "full"; then CFLAGS="-g3 $CFLAGS" else CFLAGS="-g -O2 $CFLAGS" fi else CFLAGS="-O2 $CFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CFLAGS="-DNDEBUG $CFLAGS" fi case "$host" in *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; esac if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then LDFLAGS="" fi CXXFLAGS=" $CXXFLAGS" AC_PROG_CXX if test "$GXX" = "yes" || test "$CXX" = "KCC"; then if test "$kde_use_debug_code" != "no"; then if test "$CXX" = "KCC"; then CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" else if test "$kde_use_debug_code" = "full"; then CXXFLAGS="-g3 $CXXFLAGS" else CXXFLAGS="-g -O2 $CXXFLAGS" fi fi KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) dnl convenience compiler flags KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) AC_SUBST(WOVERLOADED_VIRTUAL) else if test "$CXX" = "KCC"; then CXXFLAGS="+K3 $CXXFLAGS" else CXXFLAGS="-O2 $CXXFLAGS" fi fi fi if test "$kde_use_debug_define" = "yes"; then CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" fi if test "$kde_use_profiling" = "yes"; then KDE_CHECK_COMPILER_FLAG(pg, [ CFLAGS="-pg $CFLAGS" CXXFLAGS="-pg $CXXFLAGS" ]) fi if test "$kde_use_warnings" = "yes"; then if test "$GCC" = "yes"; then case $host in *-*-linux-gnu) CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion $CXXFLAGS" ;; esac CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wbad-function-cast,[CXXFLAGS="-Wbad-function-cast $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) fi fi if test "$GCC" = "yes" && test "$kde_use_strict_options" = "yes"; then CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" fi if test "$GXX" = "yes"; then KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) fi if test "$CXX" = "KCC"; then dnl unfortunately we currently cannot disable exception support in KCC dnl because doing so is binary incompatible and Qt by default links with exceptions :-( dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], [ kde_use_pch=$enableval ],[kde_use_pch=no]) if test "$kde_use_pch" = "yes"; then dnl TODO: support --pch-dir! KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) dnl the below works (but the dir must exist), but it's dnl useless for a whole package. dnl The are precompiled headers for each source file, so when compiling dnl from scratch, it doesn't make a difference, and they take up dnl around ~5Mb _per_ sourcefile. dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) fi dnl this flag controls inlining. by default KCC inlines in optimisation mode dnl all implementations that are defined inside the class {} declaration. dnl because of templates-compatibility with broken gcc compilers, this dnl can cause excessive inlining. This flag limits it to a sane level KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) dnl Some source files are shared between multiple executables dnl (or libraries) and some of those need template instantiations. dnl In that case KCC needs to compile those sources with dnl --one_instantiation_per_object. To make it easy for us we compile dnl _all_ objects with that flag (--one_per is a shorthand). KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) fi AC_SUBST(USE_EXCEPTIONS) dnl obsolete macro - provided to keep things going USE_RTTI= AC_SUBST(USE_RTTI) case "$host" in *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; *-*-solaris*) if test "$GXX" = yes; then libstdcpp=`$CXX -print-file-name=libstdc++.so` if test ! -f $libstdcpp; then AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) fi fi ;; esac AC_VALIDIFY_CXXFLAGS AC_PROG_CXXCPP # the following is to allow programs, that are known to # have problems when compiled with -O2 if test -n "$CXXFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CXXFLAGS="" for i in $CXXFLAGS; do case $i in -O*) ;; *) NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test -n "$CFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CFLAGS="" for i in $CFLAGS; do case $i in -O*) ;; *) NOOPT_CFLAGS="$NOOPT_CFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test "x$kde_use_qt_emb" = "xyes"; then NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS -fno-rtti -DQWS" fi AC_SUBST(NOOPT_CXXFLAGS) AC_SUBST(NOOPT_CFLAGS) KDE_CHECK_FINAL ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) KDE_CXXFLAGS= AC_SUBST(KDE_CXXFLAGS) ]) AC_DEFUN(KDE_ADD_DEPENDENCIES, [ [A]M_DEPENDENCIES(CC) [A]M_DEPENDENCIES(CXX) ]) dnl just a wrapper to clean up configure.in AC_DEFUN(KDE_PROG_LIBTOOL, [ AC_REQUIRE([AC_CHECK_COMPILERS]) AC_REQUIRE([AC_ENABLE_SHARED]) AC_REQUIRE([AC_ENABLE_STATIC]) AC_REQUIRE([AC_LIBTOOL_DLOPEN]) AC_LANG_SAVE AC_LANG_C AC_OBJEXT AC_EXEEXT AC_LANG_RESTORE AM_PROG_LIBTOOL AC_LIBTOOL_CXX LIBTOOL_SHELL="/bin/sh ./libtool" # LIBTOOL="$LIBTOOL --silent" KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" AC_SUBST(KDE_PLUGIN) AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (experimental [only tested on linux/386])], kde_use_objprelink=$enableval, kde_use_objprelink=no) if test "x$kde_use_objprelink" = "xyes"; then KDE_FIND_PATH(objprelink, OBJPRELINK, [], [kde_use_objprelink=no]) if test "x$kde_use_objprelink" = "xyes"; then AC_MSG_CHECKING([Patching libtool to run objprelink.]) mv libtool libtool.orig cat > libtool <<\EOF #! /bin/sh for n ; do case $n in *.o) test -r $n && echo objprelink $n && objprelink $n ;; *.lo) m=`basename $n .lo`".o" && test -r $m && echo objprelink $m && objprelink $m m=".libs/$m" && test -r $m && echo objprelink $m && objprelink $m ;; esac; done EOF cat >> libtool libtool.orig rm libtool.orig chmod a+x libtool AC_MSG_RESULT(done) fi fi ]) AC_DEFUN(KDE_CHECK_TYPES, [ AC_CHECK_SIZEOF(int, 4)dnl AC_CHECK_SIZEOF(long, 4)dnl AC_CHECK_SIZEOF(char *, 4)dnl AC_CHECK_SIZEOF(char, 1)dnl ])dnl AC_DEFUN(KDE_DO_IT_ALL, [ AC_CANONICAL_SYSTEM AC_ARG_PROGRAM AM_INIT_AUTOMAKE($1, $2) AM_DISABLE_LIBRARIES AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) AC_CHECK_COMPILERS KDE_PROG_LIBTOOL AM_KDE_WITH_NLS AC_PATH_KDE ]) AC_DEFUN(AC_CHECK_RPATH, [ AC_MSG_CHECKING(for rpath) AC_ARG_ENABLE(rpath, [ --disable-rpath do not use the rpath feature of ld], USE_RPATH=$enableval, USE_RPATH=yes) if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then KDE_RPATH="-R \$(kde_libraries)" if test -n "$qt_libraries"; then KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" fi dnl $x_libraries is set to /usr/lib in case if test -n "$X_LDFLAGS"; then KDE_RPATH="$KDE_RPATH -R \$(x_libraries)" fi if test -n "$KDE_EXTRA_RPATH"; then KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" fi fi AC_SUBST(KDE_EXTRA_RPATH) AC_SUBST(KDE_RPATH) AC_MSG_RESULT($USE_RPATH) ]) dnl Check for the type of the third argument of getsockname AC_DEFUN(AC_CHECK_SOCKLEN_T, [ AC_MSG_CHECKING(for socklen_t) AC_CACHE_VAL(ac_cv_socklen_t, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include #include ],[ socklen_t a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=socklen_t, AC_TRY_COMPILE([ #include #include ],[ int a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=int, ac_cv_socklen_t=size_t ) ) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_socklen_t) if test "$ac_cv_socklen_t" != "socklen_t"; then AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, [Define the real type of socklen_t]) fi AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) ]) dnl This is a merge of some macros out of the gettext aclocal.m4 dnl since we don't need anything, I took the things we need dnl the copyright for them is: dnl > dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. dnl This Makefile.in is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. dnl > dnl for this file it is relicensed under LGPL AC_DEFUN(AM_KDE_WITH_NLS, [ dnl If we use NLS figure out what method AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) GMSGFMT=":" fi MSGFMT=$GMSGFMT AC_SUBST(GMSGFMT) AC_SUBST(MSGFMT) AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext programs is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi AC_SUBST(XGETTEXT) ]) # Search path for a program which passes the given test. # Ulrich Drepper , 1996. # serial 1 # Stephan Kulow: I appended a _KDE against name conflicts dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test -n "[$]$1"; then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # serial 1 AC_DEFUN(AM_LC_MESSAGES, [if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) fi fi]) dnl From Jim Meyering. dnl FIXME: migrate into libit. AC_DEFUN([AM_FUNC_OBSTACK], [AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, [AC_TRY_LINK([#include "obstack.h"], [struct obstack *mem;obstack_free(mem,(char *) 0)], am_cv_func_obstack=yes, am_cv_func_obstack=no)]) if test $am_cv_func_obstack = yes; then AC_DEFINE(HAVE_OBSTACK) else LIBOBJS="$LIBOBJS obstack.o" fi ]) dnl From Jim Meyering. Use this if you use the GNU error.[ch]. dnl FIXME: Migrate into libit AC_DEFUN([AM_FUNC_ERROR_AT_LINE], [AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], am_cv_lib_error_at_line=yes, am_cv_lib_error_at_line=no)]) if test $am_cv_lib_error_at_line = no; then LIBOBJS="$LIBOBJS error.o" fi AC_SUBST(LIBOBJS)dnl ]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995. # serial 1 # Stephan Kulow: I put a KDE in it to avoid name conflicts AC_DEFUN(AM_KDE_GNU_GETTEXT, [AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_REQUIRE([AM_KDE_WITH_NLS])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h]) AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ __argz_count __argz_stringify __argz_next]) AC_MSG_CHECKING(for stpcpy) AC_CACHE_VAL(kde_cv_func_stpcpy, [ kde_safe_cxxflags=$CXXFLAGS CXXFLAGS="-Wmissing-prototypes -Werror" AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include ], [ char buffer[200]; stpcpy(buffer, buffer); ], kde_cv_func_stpcpy=yes, kde_cv_func_stpcpy=no) AC_LANG_RESTORE CXXFLAGS=$kde_safe_cxxflags ]) AC_MSG_RESULT($kde_cv_func_stpcpy) if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) fi AM_LC_MESSAGES if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; esac done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi ]) AC_DEFUN(AC_HAVE_XPM, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= test -z "$XPM_INCLUDE" && XPM_INCLUDE= AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], xpm_test=$withval, xpm_test="yes") if test "x$xpm_test" = xno; then ac_cv_have_xpm=no else AC_MSG_CHECKING(for XPM) AC_CACHE_VAL(ac_cv_have_xpm, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" if test "x$kde_use_qt_emb" != "xyes"; then LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" else LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" fi CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" AC_TRY_LINK([#include ],[], ac_cv_have_xpm="yes",ac_cv_have_xpm="no") LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_xpm" = no; then AC_MSG_RESULT(no) XPM_LDFLAGS="" XPMINC="" $2 else AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) if test "$XPM_LDFLAGS" = ""; then XPMLIB='-lXpm $(LIB_X11)' else XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' fi if test "$XPM_INCLUDE" = ""; then XPMINC="" else XPMINC="-I$XPM_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(XPMINC) AC_SUBST(XPMLIB) ]) AC_DEFUN(AC_HAVE_DPMS, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= DPMS_LIB= AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], dpms_test=$withval, dpms_test="yes") if test "x$dpms_test" = xno; then ac_cv_have_dpms=no else AC_MSG_CHECKING(for DPMS) dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". AC_CACHE_VAL(ac_cv_have_dpms, [ if test "x$kde_use_qt_emb" = "xyes"; then AC_MSG_RESULT(no) ac_cv_have_dpms="no" else AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" ac_save_libs="$LIBS" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], ac_cv_have_dpms="yes", [ LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" LIBS="$LIBS -lXdpms" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], [ ac_cv_have_dpms="-lXdpms" ],ac_cv_have_dpms="no") ]) LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LIBS="$ac_save_libs" fi ])dnl if test "$ac_cv_have_dpms" = no; then AC_MSG_RESULT(no) DPMS_LDFLAGS="" DPMSINC="" $2 else AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) if test "$ac_cv_have_dpms" = "-lXdpms"; then DPMS_LIB="-lXdpms" fi if test "$DPMS_LDFLAGS" = ""; then DPMSLIB="$DPMS_LIB "'$(LIB_X11)' else DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' fi if test "$DPMS_INCLUDE" = ""; then DPMSINC="" else DPMSINC="-I$DPMS_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(DPMSINC) AC_SUBST(DPMSLIB) ]) AC_DEFUN(AC_HAVE_GL, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$GL_LDFLAGS" && GL_LDFLAGS= test -z "$GL_INCLUDE" && GL_INCLUDE= AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], gl_test=$withval, gl_test="yes") if test "x$kde_use_qt_emb" = "xyes"; then # GL and Qt Embedded is a no-go for now. ac_cv_have_gl=no elif test "x$gl_test" = xno; then ac_cv_have_gl=no else AC_MSG_CHECKING(for GL) AC_CACHE_VAL(ac_cv_have_gl, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="mesa", ac_cv_have_gl="no") if test "x$ac_cv_have_gl" = "xno"; then LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$ac_save_cflags $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="yes", ac_cv_have_gl="no") fi LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_gl" = "no"; then AC_MSG_RESULT(no) GL_LDFLAGS="" GLINC="" $2 else AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) if test "$GL_LDFLAGS" = ""; then if test "$ac_cv_have_gl" = "mesa"; then GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)' else GLLIB='-lGL -lGLU $(LIB_X11)' fi else if test "$ac_cv_have_gl" = "mesa"; then GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)' else GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)' fi fi if test "$GL_INCLUDE" = ""; then GLINC="" else GLINC="-I$GL_INCLUDE" fi AC_MSG_RESULT($ac_cv_have_gl) $1 fi fi AC_SUBST(GLINC) AC_SUBST(GLLIB) ]) dnl shadow password and PAM magic - maintained by ossi@kde.org AC_DEFUN(KDE_PAM, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_ARG_WITH(pam, [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], [ if test "x$withval" = "xyes"; then use_pam=yes pam_service=kde elif test "x$withval" = "xno"; then use_pam=no else use_pam=yes pam_service=$withval fi ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ], [ AC_CACHE_VAL(ac_cv_path_pam, [ use_pam=no AC_CHECK_LIB(pam, pam_start, [ AC_CHECK_HEADER(security/pam_appl.h, [ use_pam=yes pam_service=kde ]) ], , $LIBDL) ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ]) ]) eval "$ac_cv_path_pam" AC_MSG_CHECKING(for PAM) if test "x$use_pam" = xno; then AC_MSG_RESULT(no) PAMLIBS="" else AC_MSG_RESULT(yes) AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" dnl test whether struct pam_message is const (Linux) or not (Sun) AC_MSG_CHECKING(for const pam_message) AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, [AC_MSG_RESULT([const: Linux-type PAM])], [AC_MSG_RESULT([nonconst: Sun-type PAM]) AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] )], [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) fi AC_SUBST(PAMLIBS) ]) dnl DEF_PAM_SERVICE(arg name, full name, define name) AC_DEFUN(DEF_PAM_SERVICE, [ AC_ARG_WITH($1-pam, [ --with-$1-pam=[val] override PAM service from --with-pam for $2], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$withval" else AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. You may want to enforce it by using --with-pam.]) fi ], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$pam_service" fi ]) if test -n "$$3_PAM_SERVICE"; then AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) fi AC_SUBST($3_PAM_SERVICE) ]) AC_DEFUN(KDE_SHADOWPASSWD, [ AC_REQUIRE([KDE_PAM]) AC_CHECK_LIB(shadow, getspent, [ LIBSHADOW="-lshadow" ac_use_shadow=yes ], [ dnl for UnixWare AC_CHECK_LIB(gen, getspent, [ LIBGEN="-lgen" ac_use_shadow=yes ], [ AC_CHECK_FUNC(getspent, [ ac_use_shadow=yes ], [ ac_use_shadow=no ]) ]) ]) AC_SUBST(LIBSHADOW) AC_SUBST(LIBGEN) AC_MSG_CHECKING([for shadow passwords]) AC_ARG_WITH(shadow, [ --with-shadow If you want shadow password support ], [ if test "x$withval" != "xno"; then use_shadow=yes else use_shadow=no fi ], [ use_shadow="$ac_use_shadow" ]) if test "x$use_shadow" = xyes; then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) else AC_MSG_RESULT(no) LIBSHADOW= LIBGEN= fi dnl finally make the relevant binaries setuid root, if we have shadow passwds. dnl this still applies, if we could use it indirectly through pam. if test "x$use_shadow" = xyes || ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then case $host in *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) SETUIDFLAGS="-m 4755 -o root";; *) SETUIDFLAGS="-m 4755";; esac fi AC_SUBST(SETUIDFLAGS) ]) AC_DEFUN(KDE_PASSWDLIBS, [ AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT AC_REQUIRE([KDE_PAM]) AC_REQUIRE([KDE_SHADOWPASSWD]) if test "x$use_pam" = "xyes"; then PASSWDLIBS="$PAMLIBS" else PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" fi dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires dnl root to read, so kcheckpass needs to be root (even when using pam, since pam dnl may need to read /etc/master.passwd). case $host in *-*-freebsd*) SETUIDFLAGS="-m 4755 -o root" ;; *) ;; esac AC_SUBST(PASSWDLIBS) ]) AC_DEFUN(KDE_CHECK_LIBDL, [ AC_CHECK_LIB(dl, dlopen, [ LIBDL="-ldl" ac_cv_have_dlfcn=yes ]) AC_CHECK_LIB(dld, shl_unload, [ LIBDL="-ldld" ac_cv_have_shload=yes ]) AC_SUBST(LIBDL) ]) AC_DEFUN(KDE_CHECK_DLOPEN, [ KDE_CHECK_LIBDL AC_CHECK_HEADERS(dlfcn.h dl.h) if test "$ac_cv_header_dlfcn_h" = "no"; then ac_cv_have_dlfcn=no fi if test "$ac_cv_header_dl_h" = "no"; then ac_cv_have_shload=no fi dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE dnl (MM) AC_ARG_ENABLE(dlopen, [ --disable-dlopen link statically [default=no]] , enable_dlopen=$enableval, enable_dlopen=yes) # override the user's opinion, if we know it better ;) if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then enable_dlopen=no fi if test "$ac_cv_have_dlfcn" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) fi if test "$ac_cv_have_shload" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) fi if test "$enable_dlopen" = no ; then test -n "$1" && eval $1 else test -n "$2" && eval $2 fi ]) AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, [ KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) KDE_PROG_LIBTOOL AC_MSG_CHECKING([dynamic loading]) eval "`egrep '^build_libtool_libs=' libtool`" if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then dynamic_loading=yes AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) else dynamic_loading=no fi AC_MSG_RESULT($dynamic_loading) if test "$dynamic_loading" = "yes"; then $1 else $2 fi ]) AC_DEFUN(KDE_ADD_INCLUDES, [ if test -z "$1"; then test_include="Pix.h" else test_include="$1" fi AC_MSG_CHECKING([for libg++ ($test_include)]) AC_CACHE_VAL(kde_cv_libgpp_includes, [ kde_cv_libgpp_includes=no for ac_dir in \ \ /usr/include/g++ \ /usr/include \ /usr/unsupported/include \ /opt/include \ $extra_include \ ; \ do if test -r "$ac_dir/$test_include"; then kde_cv_libgpp_includes=$ac_dir break fi done ]) AC_MSG_RESULT($kde_cv_libgpp_includes) if test "$kde_cv_libgpp_includes" != "no"; then all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" fi ]) ]) AC_DEFUN(KDE_CHECK_MICO, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_MISC_TESTS]) AC_MSG_CHECKING(for MICO) if test -z "$MICODIR"; then kde_micodir=/usr/local else kde_micodir="$MICODIR" fi AC_ARG_WITH(micodir, [ --with-micodir=micodir where mico is installed ], kde_micodir=$withval, kde_micodir=$kde_micodir ) AC_CACHE_VAL(kde_cv_mico_incdir, [ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) ]) kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` if test ! -r $kde_micodir/include/CORBA.h; then AC_MSG_ERROR([No CORBA.h found, specify another micodir]) fi AC_MSG_RESULT($kde_micodir) MICO_INCLUDES=-I$kde_micodir/include AC_SUBST(MICO_INCLUDES) MICO_LDFLAGS=-L$kde_micodir/lib AC_SUBST(MICO_LDFLAGS) micodir=$kde_micodir AC_SUBST(micodir) AC_MSG_CHECKING([for MICO version]) AC_CACHE_VAL(kde_cv_mico_version, [ AC_LANG_C cat >conftest.$ac_ext < #include int main() { printf("MICO_VERSION=%s\n",MICO_VERSION); return (0); } EOF ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' if AC_TRY_EVAL(ac_compile); then if eval `./conftest 2>&5`; then kde_cv_mico_version=$MICO_VERSION else AC_MSG_ERROR([your system is not able to execute a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi else AC_MSG_ERROR([your system is not able to compile a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi ]) dnl installed MICO version mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "x$1" = "x"; then req_version="2.3.0" else req_version=$1 fi dnl required MICO version req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "$mico_v_maj" -lt "$req_v_maj" || \ ( test "$mico_v_maj" -eq "$req_v_maj" && \ test "$mico_v_mid" -lt "$req_v_mid" ) || \ ( test "$mico_v_mid" -eq "$req_v_mid" && \ test "$mico_v_min" -lt "$req_v_min" ) then AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ at least is required. You should upgrade MICO.]) else AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) fi LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" AC_SUBST(LIBMICO) if test -z "$IDL"; then IDL='$(kde_bindir)/cuteidl' fi AC_SUBST(IDL) IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' AC_SUBST(IDL_DEPENDENCIES) idldir="\$(includedir)/idl" AC_SUBST(idldir) ]) AC_DEFUN(KDE_CHECK_MINI_STL, [ AC_REQUIRE([KDE_CHECK_MICO]) AC_MSG_CHECKING(if we use mico's mini-STL) AC_CACHE_VAL(kde_cv_have_mini_stl, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_cxxflags="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" AC_TRY_COMPILE( [ #include ], [ #ifdef HAVE_MINI_STL #error "nothing" #endif ], kde_cv_have_mini_stl=no, kde_cv_have_mini_stl=yes) CXXFLAGS="$kde_save_cxxflags" AC_LANG_RESTORE ]) if test "x$kde_cv_have_mini_stl" = "xyes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) ]) AC_DEFUN(KDE_CHECK_LIBPTHREAD, [ AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, [ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], kde_use_kernthreads=$enableval, kde_use_kernthreads=no) if test "$kde_use_kernthreads" = "yes"; then ac_save_CXXFLAGS="$CXXFLAGS" ac_save_CFLAGS="$CFLAGS" CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) CXXFLAGS="$ac_save_CXXFLAGS" CFLAGS="$ac_save_CFLAGS" if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then kde_use_kernthreads=no else dnl Add proper -I and -l statements AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD if test "x$LIBPTHREAD" = "x"; then kde_use_kernthreads=no else USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" fi fi else USE_THREADS="" if test -z "$LIBPTHREAD"; then KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) fi fi case $host_os in solaris*) KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" ;; freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;; aix*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" LIBPTHREAD="$LIBPTHREAD -lc_r" ;; linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" if test "$CXX" = "KCC"; then CXXFLAGS="$CXXFLAGS --thread_safe" NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" fi ;; *) ;; esac AC_SUBST(USE_THREADS) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_THREADING, [ AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) dnl default is yes if libpthread is found and no if no libpthread is available if test -z "$LIBPTHREAD"; then if test -z "$USE_THREADS"; then kde_check_threading_default=no else kde_check_threading_default=yes fi else kde_check_threading_default=yes fi AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) if test "x$kde_use_threading" = "xyes"; then AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) fi ]) AC_DEFUN(KDE_TRY_LINK_PYTHON, [ if test "$kde_python_link_found" = no; then if test "$1" = normal; then AC_MSG_CHECKING(if a Python application links) else AC_MSG_CHECKING(if Python depends on $2) fi AC_CACHE_VAL(kde_cv_try_link_python_$1, [ AC_LANG_SAVE AC_LANG_C kde_save_cflags="$CFLAGS" CFLAGS="$CFLAGS $PYTHONINC" kde_save_libs="$LIBS" LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" kde_save_ldflags="$LDFLAGS" LDFLAGS="$LDFLAGS $PYTHONLIB" AC_TRY_LINK( [ #include ],[ PySys_SetArgv(1, 0); ], [kde_cv_try_link_python_$1=yes], [kde_cv_try_link_python_$1=no] ) CFLAGS="$kde_save_cflags" LIBS="$kde_save_libs" LDFLAGS="$kde_save_ldflags" ]) if test "$kde_cv_try_link_python_$1" = "yes"; then AC_MSG_RESULT(yes) kde_python_link_found=yes if test ! "$1" = normal; then LIBPYTHON="$LIBPYTHON $2" fi $3 else AC_MSG_RESULT(no) $4 fi AC_LANG_RESTORE fi ]) AC_DEFUN(KDE_CHECK_PYTHON_DIR, [ AC_MSG_CHECKING([for Python directory]) AC_CACHE_VAL(kde_cv_pythondir, [ if test -z "$PYTHONDIR"; then kde_cv_pythondir=/usr/local else kde_cv_pythondir="$PYTHONDIR" fi ]) AC_ARG_WITH(pythondir, [ --with-pythondir=pythondir use python installed in pythondir ], [ ac_python_dir=$withval ], ac_python_dir=$kde_cv_pythondir ) AC_MSG_RESULT($ac_python_dir) ]) AC_DEFUN(KDE_CHECK_PYTHON_INTERN, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) if test -z "$1"; then version="1.5" else version="$1" fi AC_MSG_CHECKING([for Python$version]) python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) if test ! -r $python_incdir/Python.h; then AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) python_incdir=$python_incdir/python$version if test ! -r $python_incdir/Python.h; then python_incdir=no fi fi PYTHONINC=-I$python_incdir python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) if test ! -r $python_libdir/libpython$version.a; then AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) python_libdir=$python_libdir/python$version/config if test ! -r $python_libdir/libpython$version.a; then python_libdir=no fi fi PYTHONLIB=-L$python_libdir kde_orig_LIBPYTHON=$LIBPYTHON if test -z "$LIBPYTHON"; then LIBPYTHON=-lpython$version fi python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) python_moddir=$python_moddir/python$version if test ! -r $python_moddir/copy.py; then python_moddir=no fi PYTHONMODDIR=$python_moddir AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then LIBPYTHON=$kde_orig_LIBPYTHON test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" $2 else dnl Note: this test is very weak kde_python_link_found=no KDE_TRY_LINK_PYTHON(normal) KDE_TRY_LINK_PYTHON(m, -lm) KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) KDE_TRY_LINK_PYTHON(tcl, -ltcl) KDE_TRY_LINK_PYTHON(db2, -ldb2) KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], [AC_MSG_WARN([it seems, Python depends on another library. Pleae set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this and contact the authors to let them know about this problem]) ]) LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" AC_SUBST(PYTHONINC) AC_SUBST(PYTHONLIB) AC_SUBST(LIBPYTHON) AC_SUBST(PYTHONMODDIR) AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) fi ]) AC_DEFUN(KDE_CHECK_PYTHON, [ KDE_CHECK_PYTHON_INTERN("2.2", [KDE_CHECK_PYTHON_INTERN("2.1", [KDE_CHECK_PYTHON_INTERN("2.0", [ KDE_CHECK_PYTHON_INTERN($1, $2) ]) ])]) ]) AC_DEFUN(KDE_CHECK_STL_SGI, [ AC_MSG_CHECKING([if STL implementation is SGI like]) AC_CACHE_VAL(kde_cv_stl_type_sgi, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hallo Welt."; astring.erase(0, 6); // now astring is "Welt" return 0; ], kde_cv_stl_type_sgi=yes, kde_cv_stl_type_sgi=no) ]) AC_MSG_RESULT($kde_cv_stl_type_sgi) if test "$kde_cv_stl_type_sgi" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) fi ]) AC_DEFUN(KDE_CHECK_STL_HP, [ AC_MSG_CHECKING([if STL implementation is HP like]) AC_CACHE_VAL(kde_cv_stl_type_hp, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hello World"; astring.remove(0, 6); // now astring is "World" return 0; ], kde_cv_stl_type_hp=yes, kde_cv_stl_type_hp=no) ]) AC_MSG_RESULT($kde_cv_stl_type_hp) if test "$kde_cv_stl_type_hp" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) fi ]) AC_DEFUN(KDE_CHECK_STL, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" KDE_CHECK_STL_SGI if test "$kde_cv_stl_type_sgi" = "no"; then KDE_CHECK_STL_HP if test "$kde_cv_stl_type_hp" = "no"; then AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") fi fi CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) AC_DEFUN(AC_FIND_QIMGIO, [AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for qimgio]) AC_CACHE_VAL(ac_cv_lib_qimgio, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" ac_save_CXXFLAGS="$CXXFLAGS" LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" AC_TRY_RUN(dnl [ #include #include int main() { QString t = "hallo"; t.fill('t'); qInitImageIO(); } ], ac_cv_lib_qimgio=yes, ac_cv_lib_qimgio=no, ac_cv_lib_qimgio=no) LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ])dnl if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) AC_SUBST(LIBQIMGIO) else AC_MSG_RESULT(not found) fi ]) AC_DEFUN(KDE_CHECK_ANSI, [ ]) AC_DEFUN(KDE_CHECK_INSURE, [ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], [ if test $enableval = "no"; dnl then ac_use_insure="no" else ac_use_insure="yes" fi ], [ac_use_insure="no"]) AC_MSG_CHECKING(if we will use Insure++ to debug) AC_MSG_RESULT($ac_use_insure) if test "$ac_use_insure" = "yes"; dnl then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? fi ]) AC_DEFUN(AM_DISABLE_LIBRARIES, [ AC_PROVIDE([AM_ENABLE_STATIC]) AC_PROVIDE([AM_ENABLE_SHARED]) enable_static=no enable_shared=yes ]) AC_DEFUN(AC_CHECK_UTMP_FILE, [ AC_MSG_CHECKING([for utmp file]) AC_CACHE_VAL(kde_cv_utmp_file, [ kde_cv_utmp_file=no for ac_file in \ \ /var/run/utmp \ /var/adm/utmp \ /etc/utmp \ ; \ do if test -r "$ac_file"; then kde_cv_utmp_file=$ac_file break fi done ]) if test "$kde_cv_utmp_file" != "no"; then AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) $1 AC_MSG_RESULT($kde_cv_utmp_file) else $2 AC_MSG_RESULT([non found]) fi ]) AC_DEFUN(KDE_CREATE_SUBDIRSLIST, [ DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" if test ! -s $srcdir/subdirs; then dnl Note: Makefile.common creates subdirs, so this is just a fallback TOPSUBDIRS="" files=`cd $srcdir && ls -1` dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` for i in $dirs; do echo $i >> $srcdir/subdirs done fi if test -s $srcdir/inst-apps; then ac_topsubdirs="`cat $srcdir/inst-apps`" else ac_topsubdirs="`cat $srcdir/subdirs`" fi for i in $ac_topsubdirs; do AC_MSG_CHECKING([if $i should be compiled]) if test -d $srcdir/$i; then install_it="yes" for j in $DO_NOT_COMPILE; do if test $i = $j; then install_it="no" fi done else install_it="no" fi AC_MSG_RESULT($install_it) if test $install_it = "yes"; then TOPSUBDIRS="$TOPSUBDIRS $i" fi done AC_SUBST(TOPSUBDIRS) ]) AC_DEFUN(KDE_CHECK_NAMESPACES, [ AC_MSG_CHECKING(whether C++ compiler supports namespaces) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ ], [ namespace Foo { extern int i; namespace Bar { extern int i; } } int Foo::i = 0; int Foo::Bar::i = 1; ],[ AC_MSG_RESULT(yes) AC_DEFINE(HAVE_NAMESPACES) ], [ AC_MSG_RESULT(no) ]) AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_NEWLIBS, [ ]) dnl ------------------------------------------------------------------------ dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_S_ISSOCK, [ AC_MSG_CHECKING(for S_ISSOCK) AC_CACHE_VAL(ac_cv_have_s_issock, [ AC_LANG_SAVE AC_LANG_C AC_TRY_LINK( [ #include ], [ struct stat buff; int b = S_ISSOCK( buff.st_mode ); ], ac_cv_have_s_issock=yes, ac_cv_have_s_issock=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_have_s_issock) if test "$ac_cv_have_s_issock" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) fi ]) dnl ------------------------------------------------------------------------ dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, [ AC_MSG_CHECKING(for MAXPATHLEN) AC_CACHE_VAL(ac_cv_maxpathlen, [ AC_LANG_C cat > conftest.$ac_ext < #endif #include #include #ifndef MAXPATHLEN #define MAXPATHLEN 1024 #endif KDE_HELLO MAXPATHLEN EOF ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" if AC_TRY_EVAL(ac_try) && test -s conftest.out; then ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` else ac_cv_maxpathlen=1024 fi rm conftest.* ]) AC_MSG_RESULT($ac_cv_maxpathlen) AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) ]) dnl ------------------------------------------------------------------------- dnl See if the compiler supports a template repository bero@redhat.de dnl ------------------------------------------------------------------------- AC_DEFUN(KDE_COMPILER_REPO, [ REPO="" NOREPO="" KDE_CHECK_COMPILER_FLAG(frepo, [ REPO="-frepo" NOREPO="-fno-repo" ]) if test -z "$REPO"; then KDE_CHECK_COMPILER_FLAG(instances=explicit, [ REPO="-instances=explicit" NOREPO="-instances=extern" ]) fi if test -n "$REPO"; then AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1, [C++ compiler supports template repository]) $1 fi AC_SUBST(REPO) AC_SUBST(NOREPO) ]) AC_DEFUN(KDE_CHECK_HEADER, [ AC_LANG_SAVE kde_safe_cppflags=$CPPFLAGS CPPFLAGS="$CPPFLAGS $all_includes" AC_LANG_CPLUSPLUS AC_CHECK_HEADER($1, $2, $3) CPPFLAGS=$kde_safe_cppflags AC_LANG_RESTORE ]) AC_DEFUN(KDE_FAST_CONFIGURE, [ dnl makes configure fast (needs perl) AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], with_fast_perl=$enableval, with_fast_perl=yes) ]) AC_DEFUN(KDE_CONF_FILES, [ val= if test -f $srcdir/configure.files ; then val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` fi CONF_FILES= if test -n "$val" ; then for i in $val ; do CONF_FILES="$CONF_FILES $i" done fi AC_SUBST(CONF_FILES) ])dnl AC_DEFUN(KDE_SET_PREFIX, [ unset CDPATH dnl make $KDEDIR the default for the installation AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix ac_configure_args="$ac_configure_args --prefix=$prefix" fi KDE_FAST_CONFIGURE KDE_CONF_FILES ]) pushdef([AC_PROG_INSTALL], [ dnl our own version, testing for a -p flag popdef([AC_PROG_INSTALL]) dnl as AC_PROG_INSTALL works as it works we first have dnl to save if the user didn't specify INSTALL, as the dnl autoconf one overwrites INSTALL and we have no chance to find dnl out afterwards test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT AC_PROG_INSTALL if test -z "$kde_save_INSTALL_given" ; then # OK, user hasn't given any INSTALL, autoconf found one for us # now we test, if it supports the -p flag AC_MSG_CHECKING(for -p flag to install) rm -f confinst.$$.* > /dev/null 2>&1 echo "Testtest" > confinst.$$.orig ac_res=no if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then if test -f confinst.$$.new ; then # OK, -p seems to do no harm to install INSTALL="${INSTALL} -p" ac_res=yes fi fi rm -f confinst.$$.* AC_MSG_RESULT($ac_res) fi dnl the following tries to resolve some signs and wonders coming up dnl with different autoconf/automake versions dnl e.g.: dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the dnl install-@DIR@PROGRAMS targets to explicitly use that flag dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from dnl automake (due to broken Makefile.am or whatever) to install programs, dnl and so does not see the -s flag in automake > 1.4 dnl to clean up that mess we: dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG dnl which cleans KDE's program with automake > 1.4; dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems dnl with automake<=1.4 dnl note that dues to this sometimes two '-s' flags are used (if KDE dnl properly uses install-@DIR@PROGRAMS, but I don't care dnl dnl And to all this comes, that I even can't write in comments variable dnl names used by automake, because it is so stupid to think I wanted to dnl _use_ them, therefor I have written A_M_... instead of AM_ dnl hmm, I wanted to say something ... ahh yes: Arghhh. if test -z "$kde_save_INSTALL_PROGRAM_given" ; then INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' fi if test -z "$kde_save_INSTALL_SCRIPT_given" ; then INSTALL_SCRIPT='${INSTALL}' fi ])dnl AC_DEFUN(KDE_LANG_CPLUSPLUS, [AC_LANG_CPLUSPLUS ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) ]) pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS ]) AC_DEFUN(KDE_CHECK_LONG_LONG, [ AC_MSG_CHECKING(for long long) AC_CACHE_VAL(kde_cv_c_long_long, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_LINK([], [ long long foo = 0; foo = foo+1; ], kde_cv_c_long_long=yes, kde_cv_c_long_long=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($kde_cv_c_long_long) if test "$kde_cv_c_long_long" = yes; then AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) fi ]) AC_DEFUN(KDE_CHECK_LIB, [ kde_save_LDFLAGS="$LDFLAGS" dnl AC_CHECK_LIB modifies LIBS, so save it here kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $all_libraries" case $host_os in aix*) LDFLAGS="-brtl $LDFLAGS" test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" ;; esac AC_CHECK_LIB($1, $2, $3, $4, $5) LDFLAGS="$kde_save_LDFLAGS" LIBS="$kde_save_LIBS" ]) AC_DEFUN(KDE_CHECK_INITGROUPS, [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_CHECK_FUNCS(initgroups) if test "x$ac_cv_func_initgroups" = "xyes"; then case $host_os in aix*) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_MSG_CHECKING([for initgroups prototype]) AC_CACHE_VAL(kde_cv_check_initgroups_proto, [ AC_TRY_COMPILE( [ #include ], [ char buffer[10]; gid_t id; int x = initgroups(buffer,id); ], kde_cv_check_initgroups_proto=yes, kde_cv_check_initgroups_proto=no) ]) AC_MSG_RESULT($kde_cv_check_initgroups_proto) AC_LANG_RESTORE ;; *) kde_cv_check_initgroups_proto=yes ;; esac else kde_cv_check_initgroups_proto=no fi if test "x$kde_cv_check_initgroups_proto" = "xyes"; then kde_check_initgroups_proto=1 else kde_check_initgroups_proto=0 fi AC_DEFINE_UNQUOTED(HAVE_INITGROUPS_PROTO,$kde_check_initgroups_proto, [initgroups may exist but not its prototype (e.g. AIX<4.3.3:8)]) ]) AC_DEFUN(KDE_CHECK_JAVA_DIR, [ AC_MSG_CHECKING([for Java directory]) AC_ARG_WITH(java, [ --with-java=javadir use java installed in javadir, --without-java disables ], [ ac_java_dir=$withval ], ac_java_dir="" ) dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH if test "x$ac_java_dir" = "xno"; then kde_cv_java_bindir=no kde_cv_java_includedir=no kde_java_libjvmdir=no kde_java_libhpidir=no else if test "x$ac_java_dir" = "x"; then dnl No option set -> look in $PATH AC_CACHE_VAL(kde_cv_java_bindir, [ dnl First look for javac in $PATH. If not found we'll look at the option. KDE_FIND_PATH(javac, JAVAC, [], []) if test -n "$JAVAC"; then kde_cv_java_bindir=`echo $JAVAC | sed -e 's,/javac$,/,'` dnl this substitution might not work - well, we test for jni.h below kde_cv_java_includedir=`echo $kde_cv_java_bindir | sed -e 's,bin/$,include/,'` else kde_cv_java_bindir=no fi ]) else dnl config option set kde_cv_java_bindir=$ac_java_dir/bin kde_cv_java_includedir=$ac_java_dir/include fi fi dnl At this point kde_cv_java_bindir and kde_cv_java_includedir are either set or "no" if test "x$kde_cv_java_bindir" != "xno"; then dnl Look for libjvm.so kde_java_libjvmdir=`find $kde_cv_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` dnl Look for libhpi.so and avoid green threads kde_java_libhpidir=`find $kde_cv_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,'` dnl Now check everything's fine under there if test ! -x "$kde_cv_java_bindir/javac"; then AC_MSG_ERROR([javac not found under $kde_cv_java_bindir - it seems you passed a wrong --with-java.]) fi if test ! -x "$kde_cv_java_bindir/javah"; then AC_MSG_ERROR([javah not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -x "$kde_cv_java_bindir/jar"; then AC_MSG_ERROR([jar not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -r "$kde_cv_java_includedir/jni.h"; then AC_MSG_ERROR([jni.h not found under $kde_cv_java_includedir. Use --with-java or --without-java.]) fi if test ! -r "$kde_java_libjvmdir/libjvm.so"; then AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) fi if test ! -r "$kde_java_libhpidir/libhpi.so"; then AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) fi jni_includes="-I$kde_cv_java_includedir" dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. dnl and under linux here.. test -d "$kde_cv_java_includedir/linux" && jni_includes="$jni_includes -I$kde_cv_java_includedir/linux" test -d "$kde_cv_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_cv_java_includedir/genunix" dnl Check for JNI version AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" AC_TRY_COMPILE([ #include ], [ #ifndef JNI_VERSION_1_2 Syntax Error #endif ],[ kde_jni_works=yes ], [ kde_jni_works=no ]) if test $kde_jni_works = no; then AC_MSG_ERROR([Incorrect version of $kde_cv_java_includedir/jni.h. You need to have Java Development Kit (JDK) version 1.2. Use --with-java to specify another location. Use --without-java to configure without java support. Or download a newer JDK and try again. See e.g. http://java.sun.com/products/jdk/1.2 ]) fi CXXFLAGS="$ac_cxxflags_safe" AC_LANG_RESTORE dnl All tests ok, inform and subst the variables AC_MSG_RESULT([javac/javah/jar in $kde_cv_java_bindir, jni.h in $kde_cv_java_includedir]) JAVAC=$kde_cv_java_bindir/javac AC_SUBST(JAVAC) JAVAH=$kde_cv_java_bindir/javah AC_SUBST(JAVAH) JAR=$kde_cv_java_bindir/jar AC_SUBST(JAR) AC_SUBST(jni_includes) JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" AC_SUBST(JVMLIBS) fi ]) dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. dnl When the argument list becomes big, as in KDE for AC_OUTPUT in dnl big packages, m4_foreach is dog-slow. So use our own version of dnl it. (matz@kde.org) m4_define([mm_foreach], [m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) m4_define([mm_car], [[$1]]) m4_define([mm_car2], [[$@]]) m4_define([_mm_foreach], [m4_if(m4_quote($2), [], [], [m4_define([$1], [mm_car($2)])$3[]_mm_foreach([$1], mm_car2(m4_shift($2)), [$3])])]) m4_define([AC_FOREACH], [mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) AC_DEFUN(KDE_NEED_FLEX, [ kde_libs_safe=$LIBS LIBS="$LIBS $USER_LDFLAGS" AM_PROG_LEX LIBS=$kde_libs_safe if test -z "$LEXLIB"; then AC_MSG_ERROR([You need to have flex installed.]) fi AC_SUBST(LEXLIB) ]) AC_DEFUN(AC_PATH_QTOPIA, [ dnl TODO: use AC_CACHE_VAL if test -z "$1"; then qtopia_minver_maj=1 qtopia_minver_min=5 qtopia_minver_pat=0 else qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` fi qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" AC_REQUIRE([AC_PATH_QT]) AC_MSG_CHECKING([for Qtopia]) LIB_QTOPIA="-lqpe" AC_SUBST(LIB_QTOPIA) kde_qtopia_dirs="$QPEDIR /opt/Qtopia" ac_qtopia_incdir=NO AC_ARG_WITH(qtopia-dir, [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], [ ac_qtopia_incdir="$withval"/include] ) qtopia_incdirs="" for dir in $kde_qtopia_dirs; do qtopia_incdirs="$qtopia_incdirs $dir/include" done if test ! "$ac_qtopia_incdir" = "NO"; then qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" fi qtopia_incdir="" AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) ac_qtopia_incdir="$qtopia_incdir" if test -z "$qtopia_incdir"; then AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) fi qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" if test "$qtopia_ver" -lt "$qtopia_minver"; then AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr is required.]) fi AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIB_QTOPIA $LIBQT" cat > conftest.$ac_ext < #include int main( int argc, char **argv ) { QPEApplication app( argc, argv ); return 0; } EOF if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else rm -f conftest* AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at the end of config.log]) fi CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE QTOPIA_INCLUDES="-I$qtopia_incdir" AC_SUBST(QTOPIA_INCLUDES) AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) ]) kdocumenteditor-1.0/admin/am_edit0100644000076400007640000020625607735744575017167 0ustar tasukuhomeuser#!/usr/bin/perl -w # Expands the specialised KDE tags in Makefile.in to (hopefully) valid # make syntax. # When called without file parameters, we work recursively on all Makefile.in # in and below the current subdirectory. When called with file parameters, # only those Makefile.in are changed. # The currently supported tags are # # {program}_METASOURCES # where you have a choice of two styles # {program}_METASOURCES = name1.moc name2.moc ... [\] # {program}_METASOURCES = AUTO # The second style requires other tags as well. # # To install icons : # KDE_ICON = iconname iconname2 ... # KDE_ICON = AUTO # # For documentation : # ... # # and more new tags TBD! # # The concept (and base code) for this program came from automoc, # supplied by the following # # Matthias Ettrich (The originator) # Kalle Dalheimer (The original implementator) # Harri Porten # Alex Zepeda # David Faure # Stephan Kulow use Cwd; use File::Find; use File::Basename; # Prototype the functions sub initialise (); sub processMakefile ($); sub updateMakefile (); sub restoreMakefile (); sub removeLine ($$); sub appendLines ($); sub substituteLine ($$); sub findMocCandidates (); sub pruneMocCandidates ($); sub checkMocCandidates (); sub addMocRules (); sub tag_AUTOMAKE (); sub tag_META_INCLUDES (); sub tag_METASOURCES (); sub tag_POFILES (); sub tag_DOCFILES (); sub tag_LOCALINSTALL(); sub tag_IDLFILES(); sub tag_UIFILES(); sub tag_SUBDIRS(); sub tag_ICON(); sub tag_CLOSURE(); sub tag_DIST(); # Some global globals... $verbose = 0; # a debug flag $thisProg = "$0"; # This programs name $topdir = cwd(); # The current directory @makefiles = (); # Contains all the files we'll process @foreignfiles = (); $start = (times)[0]; # some stats for testing - comment out for release $version = "v0.2"; $errorflag = 0; $cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; $hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; $progId = "KDE tags expanded automatically by " . basename($thisProg); $automkCall = "\n"; $printname = ""; # used to display the directory the Makefile is in $use_final = 1; # create code for --enable-final $cleantarget = "clean"; $dryrun = 0; $pathoption = 0; $foreign_libtool = 0; while (defined ($ARGV[0])) { $_ = shift; if (/^--version$/) { print STDOUT "\n"; print STDOUT basename($thisProg), " $version\n", "This is really free software, unencumbered by the GPL.\n", "You can do anything you like with it except sueing me.\n", "Copyright 1998 Kalle Dalheimer \n", "Concept, design and unnecessary questions about perl\n", " by Matthias Ettrich \n\n", "Making it useful by Stephan Kulow and\n", "Harri Porten \n", "Updated (Feb-1999), John Birch \n", "Current Maintainer Stephan Kulow\n\n"; exit 0; } elsif (/^--verbose$|^-v$/) { $verbose = 1; # Oh is there a problem...? } elsif (/^-p(.+)$|^--path=(.+)$/) { $thisProg = "$1/".basename($thisProg) if($1); $thisProg = "$2/".basename($thisProg) if($2); warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); $pathoption=1; } elsif (/^--help$|^-h$/) { print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", "\n", "Patches dir/Makefile.in generated from automake\n", "(where dir can be a full or relative directory name)", "\n", " -v, --verbose verbosely list files processed\n", " -h, --help print this help, then exit\n", " --version print version number, then exit\n", " -p, --path= use the path to am_edit if the path\n", " --no-final don't patch for --enable-final\n", " called from is not the one to be used\n"; exit 0; } elsif (/^--no-final$/) { $use_final = 0; $thisProg .= " --no-final"; } elsif (/^--foreign-libtool$/) { $foreign_libtool = 1; $thisProg .= " --foreign-libtool"; } elsif (/^-n$/) { $dryrun = 1; } else { # user selects what input files to check # add full path if relative path is given $_ = cwd()."/".$_ if (! /^\//); print "User wants $_\n" if ($verbose); push (@makefiles, $_); } } if ($thisProg =~ /^\// && !$pathoption ) { print STDERR "Illegal full pathname call performed...\n", "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", "Please use option --path.\n"; exit 1; } # Only scan for files when the user hasn't entered data if (!@makefiles) { print STDOUT "Scanning for Makefile.in\n" if ($verbose); find (\&add_makefile, cwd()); #chdir('$topdir'); } else { print STDOUT "Using user enter input files\n" if ($verbose); } foreach $makefile (sort(@makefiles)) { processMakefile ($makefile); last if ($errorflag); } # Just some debug statistics - comment out for release as it uses printf. printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); exit $errorflag; # causes make to fail if erroflag is set #----------------------------------------------------------------------------- # In conjunction with the "find" call, this builds the list of input files sub add_makefile () { push (@makefiles, $File::Find::name) if (/Makefile.in$/); } #----------------------------------------------------------------------------- # Processes a single make file # The parameter contains the full path name of the Makefile.in to use sub processMakefile ($) { # some useful globals for the subroutines called here local ($makefile) = @_; local @headerdirs = ('.'); local $haveAutomocTag = 0; local $MakefileData = ""; local $cxxsuffix = "KKK"; local @programs = (); # lists the names of programs and libraries local $program = ""; local %realObjs = (); # lists the objects compiled into $program local %sources = (); # lists the sources used for $program local %finalObjs = (); # lists the objects compiled when final local %realname = (); # the binary name of program variable local %idlfiles = (); # lists the idl files used for $program local %globalmocs = ();# list of all mocfiles (in %mocFiles format) local %important = (); # list of files to be generated asap local %uiFiles = (); local $allidls = ""; local $idl_output = "";# lists all idl generated files for cleantarget local $ui_output = "";# lists all uic generated files for cleantarget local %depedmocs = (); local $metasourceTags = 0; local $dep_files = ""; local $dep_finals = ""; local %target_adds = (); # the targets to add local $kdelang = ""; local @cleanfiles = (); local $cleanMoc = ""; local $closure_output = ""; $makefileDir = dirname($makefile); chdir ($makefileDir); $printname = $makefile; $printname =~ s/^\Q$topdir\E\///; $makefile = basename($makefile); print STDOUT "Processing makefile $printname\n" if ($verbose); # Setup and see if we need to do this. return if (!initialise()); tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in tag_META_INCLUDES (); # Supplies directories for src locations foreach $program (@programs) { $sources_changed{$program} = 0; $depedmocs{$program} = ""; $important{$program} = ""; tag_IDLFILES(); # Sorts out idl rules tag_CLOSURE(); tag_UIFILES(); # Sorts out ui rules tag_METASOURCES (); # Sorts out the moc rules if ($sources_changed{$program}) { my $lookup = "$program" . '_SOURCES\s*=\s*(.*)'; substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); } if ($important{$program}) { local %source_dict = (); for $source (split(/[\034\s]+/, $sources{$program})) { $source_dict{$source} = 1; } for $source (@cleanfiles) { $source_dict{$source} = 0; } for $source (keys %source_dict) { next if (!$source); if ($source_dict{$source}) { # sanity check if (! -f $source) { print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; } else { $target_adds{"\$(srcdir)/$source"} .= $important{$program}; } } } } } if ($cleanMoc) { # Always add dist clean tag # Add extra *.moc.cpp files created for USE_AUTOMOC because they # aren't included in the normal *.moc clean rules. appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; } tag_DIST() unless ($kdeopts{"noautodist"}); if ($idl_output) { appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; } if ($ui_output) { appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; } if ($closure_output) { appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; } if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { $kdelang = '$(KDE_LANG)' } else { $kdelang = ''; } tag_POFILES (); # language rules for po directory tag_DOCFILES (); # language rules for doc directories tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs tag_ICON(); tag_SUBDIRS(); my $tmp = "force-reedit:\n"; $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; appendLines($tmp); make_meta_classes(); tag_COMPILE_FIRST(); tag_FINAL() if (!$kdeopts{"nofinal"}); my $final_lines = "final:\n\t\$(MAKE) "; my $final_install_lines = "final-install:\n\t\$(MAKE) "; my $nofinal_lines = "no-final:\n\t\$(MAKE) "; my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; foreach $program (@programs) { my $lookup = "$program\_OBJECTS.*=[^\n]*"; my $new = ""; my @list = split(/[\034\s]+/, $realObjs{$program}); if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; } else { $new = "$program\_OBJECTS = " . $realObjs{$program}; } substituteLine ($lookup, $new); } appendLines($final_lines . "all-am"); appendLines($final_install_lines . "install-am"); appendLines($nofinal_lines . "all-am"); appendLines($nofinal_install_lines . "install-am"); my $lookup = 'DEP_FILES\s*=([^\n]*)'; if ($MakefileData =~ /\n$lookup\n/o) { $depfiles = $1; if ($dep_finals) { $lines = "\@KDE_USE_FINAL_TRUE\@DEP_FILES = $dep_files $dep_finals \034\t$depfiles\n"; $lines .= "\@KDE_USE_FINAL_FALSE\@DEP_FILES = $dep_files $depfiles\n"; } else { $lines = "DEP_FILES = $dep_files $depfiles\n"; } substituteLine($lookup, $lines); } my $cvs_lines = "cvs-clean:\n"; $cvs_lines .= "\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n"; appendLines($cvs_lines); $cvs_lines = "kde-rpo-clean:\n"; $cvs_lines .= "\t-rm -f *.rpo\n"; appendLines($cvs_lines); $target_adds{"clean"} .= "kde-rpo-clean "; # some strange people like to do a install-exec, and expect that also # all modules are installed. automake doesn't know this, so we need to move # this here from install-data to install-exec. if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES"; my $lookup = 'install-data-am:\s*(.*)'; if ($MakefileData =~ /\n$lookup\n/) { my $newdeps = $1; $newdeps =~ s/\s*install-kde_moduleLTLIBRARIES\s*/ /g; substituteLine($lookup, "install-data-am: " . $newdeps); } } my $lines = ""; foreach $add (keys %target_adds) { my $lookup = quotemeta($add) . ':([^\n]*)'; if ($MakefileData =~ /\n$lookup\n/) { substituteLine($lookup, "$add: " . $target_adds{$add} . $1); } else { $lines .= "$add: " . $target_adds{$add} . "\n"; } } if ($lines) { appendLines($lines); } my $found = 1; while ($found) { if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { my $vor = $1; # "vor" means before in German my $nach = $2; # "nach" means after in German my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); my $replacement = "$1\$(KCXXFLAGS)$2"; $MakefileData =~ s/$lookup/$replacement/; $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; $replacement = "$vor\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$nach"; substituteLine($lookup, $replacement); } else { $found = 0; } } if($foreign_libtool == 0) { $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; if ($MakefileData =~ m/$lookup/ ) { $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; } $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; if ($MakefileData =~ m/$lookup/ ) { $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; } } $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; if ($MakefileData =~ m/\n$lookup\n/) { substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); } # Always update the Makefile.in updateMakefile (); return; } #----------------------------------------------------------------------------- # Check to see whether we should process this make file. # This is where we look for tags that we need to process. # A small amount of initialising on the tags is also done here. # And of course we open and/or create the needed make files. sub initialise () { if (! -r "Makefile.am") { print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); return 0; } # Checking for files to process... open (FILEIN, $makefile) || die "Could not open $makefileDir/$makefile: $!\n"; # Read the file # stat(FILEIN)[7] might look more elegant, but is slower as it # requires stat'ing the file seek(FILEIN, 0, 2); my $fsize = tell(FILEIN); seek(FILEIN, 0, 0); read FILEIN, $MakefileData, $fsize; close FILEIN; print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); # Remove the line continuations, but keep them marked # Note: we lose the trailing spaces but that's ok. $MakefileData =~ s/\\\s*\n\s*/\034/g; # If we've processed the file before... restoreMakefile () if ($MakefileData =~ /$progId/); foreach $dir (@foreignfiles) { if (substr($makefileDir,0,length($dir)) eq $dir) { return 0; } } %kdeopts = (); $kdeopts{"foreign"} = 0; $kdeopts{"qtonly"} = 0; $kdeopts{"noautodist"} = 0; $kdeopts{"foreign-libtool"} = $foreign_libtool; $kdeopts{"nofinal"} = !$use_final; # default if ($MakefileData =~ /\nKDE_OPTIONS\s*=\s*([^\n]*)\n/) { local @kde_options = split(/[\s\034]/, $1); if (grep(/^foreign$/, @kde_options)) { push(@foreignfiles, $makefileDir . "/"); return 0; # don't touch me } for $opt (@kde_options) { if (!defined $kdeopts{$opt}) { print STDERR "Warning: unknown option $opt in $printname\n"; } else { $kdeopts{$opt} = 1; } } } # Look for the tags that mean we should process this file. $metasourceTags = 0; $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); my $pofileTag = 0; $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); if ($pofileTag > 1) { print STDERR "Error: Only one POFILES tag allowed\n"; $errorflag = 1; } while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { my @list=split(' ', $1); foreach $ext (@list) { if ($ext =~ /^\.$cppExt$/) { $cxxsuffix = $ext; $cxxsuffix =~ s/\.//g; print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); last; } } } while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[ \t\034]*([^\n]*)\n/g) { my $program = $1; my $objs = $2; # safe them my $ocv = 0; my @objlist = split(/[\s\034]+/, $objs); foreach $obj (@objlist) { if ($obj =~ /\$\((\S+)\)/ ) { my $variable = $1; if ($variable !~ 'OBJEXT') { $ocv = 1; } } } next if ($ocv); $program =~ s/^am_// if ($program =~ /^am_/); my $sourceprogram = $program; $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); print STDOUT "found program $program\n" if ($verbose); push(@programs, $program); $realObjs{$program} = $objs; if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=\s*(.*)\n/) { $sources{$program} = $1; } else { $sources{$program} = ""; print STDERR "found program with no _SOURCES: $program\n"; } my $realprogram = $program; $realprogram =~ s/_/./g; # unmask to regexp if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { $realname{$program} = $1; } else { # not standard Makefile - nothing to worry about $realname{$program} = ""; } } my $lookup = '\nDEPDIR\s*=.*'; if ($MakefileData !~ /($lookup)\n/o) { $lookup = '\nbindir\s*=.*'; if ($MakefileData =~ /($lookup)\n/) { substituteLine ($lookup, "DEPDIR = .deps\n$1"); } } my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); foreach $mark (@marks) { while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) { foreach $file (split('[\034\s]', $2)) { $file =~ s/\.\///; push(@cleanfiles, $file); } } } my $localTag = 0; $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); return (!$errorflag); } #----------------------------------------------------------------------------- # Gets the list of user defined directories - relative to $srcdir - where # header files could be located. sub tag_META_INCLUDES () { my $lookup = '[^=\n]*META_INCLUDES\s*=\s*(.*)'; return 1 if ($MakefileData !~ /($lookup)\n/o); print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); my $headerStr = $2; removeLine ($lookup, $1); $headerStr =~ tr/\034/ /; my @headerlist = split(' ', $headerStr); foreach $dir (@headerlist) { $dir =~ s#\$\(srcdir\)#.#; if (! -d $dir) { print STDERR "Warning: $dir can't be found. ", "Must be a relative path to \$(srcdir)\n"; } else { push (@headerdirs, $dir); } } return 0; } #----------------------------------------------------------------------------- sub tag_FINAL() { my @final_names = (); foreach $program (@programs) { if ($sources{$program} =~ /\(/) { print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); next; } my $mocsources = ""; my @progsources = split(/[\s\034]+/, $sources{$program}); my %sourcelist = (); foreach $source (@progsources) { my $suffix = $source; $suffix =~ s/^.*\.([^\.]+)$/$1/; if (defined($sourcelist{$suffix})) { $sourcelist{$suffix} .= " " . $source; } else { $sourcelist{$suffix} .= $source; } } foreach $suffix (keys %sourcelist) { # See if this file contains c++ code. (ie Just check the files suffix against my $suffix_is_cxx = 0; if($suffix =~ /($cppExt)$/) { $cxxsuffix = $1; $suffix_is_cxx = 1; } my $mocfiles_in = ($suffix eq $cxxsuffix) && defined($depedmocs{$program}); my @sourcelist = split(/[\s\034]+/, $sourcelist{$suffix}); if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { # we support IDL on our own if ($suffix =~ /^skel$/ || $suffix =~ /^stub/ || $suffix =~ /^signals/ || $suffix =~ /^h$/ || $suffix =~ /^ui$/ ) { next; } foreach $file (@sourcelist) { $file =~ s/\Q$suffix\E$//; $finalObjs{$program} .= $file; if ($program =~ /_la$/) { $finalObjs{$program} .= "lo "; } else { $finalObjs{$program} .= "o "; } } next; # suffix } my $source_deps = ""; foreach $source (@sourcelist) { if (-f $source) { $source_deps .= "\$(srcdir)/$source "; } else { $source_deps .= "$source "; } } $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in " . $source_deps . " "; if ($mocfiles_in) { $handling .= $depedmocs{$program}; foreach $mocfile (split(' ', $depedmocs{$program})) { if ($mocfile =~ m/\.$suffix$/) { $mocsources .= " " . $mocfile; } } } $handling .= "\n"; $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; $handling .= "\tfor file in " . $sourcelist{$suffix} . " $mocsources; do \\\n"; $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; $handling .= "\tdone; \\\n"; $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; appendLines($handling); push(@final_names, "$program.all_$suffix.$suffix"); $finalObjs{$program} .= "$program.all_$suffix."; if ($program =~ /_la$/) { $finalObjs{$program} .= "lo "; } else { $finalObjs{$program} .= "o "; } } } if (!$kdeopts{"nofinal"} && @final_names >= 1) { # add clean-final target my $lines = "$cleantarget-final:\n"; $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); appendLines($lines); $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; foreach $finalfile (@final_names) { $finalfile =~ s/\.[^.]*$/.P/; $dep_finals .= " \$(DEPDIR)/$finalfile"; } } } #----------------------------------------------------------------------------- sub tag_COMPILE_FIRST() { foreach $program (@programs) { my $lookup = "$program" . '_COMPILE_FIRST\s*=\s*(.*)'; if ($MakefileData =~ m/\n$lookup\n/) { my @compilefirst = split(/[\s\034]+/, $1); my @progsources = split(/[\s\034]+/, $sources{$program}); my %donesources = (); $handling = ""; foreach $source (@progsources) { my @deps = (); my $sdeps = ""; if (-f $source) { $sdeps = "\$(srcdir)/$source"; } else { $sdeps = "$source"; } foreach $depend (@compilefirst) { next if ($source eq $depend); # avoid cyclic dependencies next if defined($donesources{$depend}); push @deps, $depend; } $handling .= "$sdeps: " . join(' ', @deps) . "\n" if (@deps); $donesources{$source} = 1; } appendLines($handling) if (length($handling)); } } } #----------------------------------------------------------------------------- # Organises the list of headers that we'll use to produce moc files # from. sub tag_METASOURCES () { local @newObs = (); # here we add to create object files local @deped = (); # here we add to create moc files local $mocExt = ".moc"; local %mocFiles = (); my $line = ""; my $postEqual = ""; my $lookup; my $found = ""; if ($metasourceTags > 1) { $lookup = $program . '_METASOURCES\s*=\s*(.*)'; return 1 if ($MakefileData !~ /\n($lookup)\n/); $found = $1; } else { $lookup = $program . '_METASOURCES\s*=\s*(.*)'; if ($MakefileData !~ /\n($lookup)\n/) { $lookup = 'METASOURCES\s*=\s*(.*)'; return 1 if ($MakefileData !~ /\n($lookup)\n/o); $found = $1; $metasourceTags = 0; # we can use the general target only once } else { $found = $1; } } print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); $postEqual = $found; $postEqual =~ s/[^=]*=//; removeLine ($lookup, $found); # Always find the header files that could be used to "moc" return 1 if (findMocCandidates ()); if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) { print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); $mocExt = ".moc.$cxxsuffix"; $haveAutomocTag = 1; } else { # Not automoc so read the list of files supplied which # should be .moc files. $postEqual =~ tr/\034/ /; # prune out extra headers - This also checks to make sure that # the list is valid. pruneMocCandidates ($postEqual); } checkMocCandidates (); if (@newObs) { my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; $depedmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; foreach $file (@newObs) { $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); } } if (@deped) { $depedmocs{$program} .= " "; $depedmocs{$program} .= join('.moc ', @deped) . ".moc"; $depedmocs{$program} .= " "; } addMocRules (); @globalmocs{keys %mocFiles}=values %mocFiles; } #----------------------------------------------------------------------------- # Returns 0 if the line was processed - 1 otherwise. # Errors are logged in the global $errorflags sub tag_AUTOMAKE () { my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\s\034]+\$\(AUTOMAKE\)(.*)'; return 1 if ($MakefileData !~ /\n($lookup)\n/); print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; substituteLine ($lookup, $newLine); $automkCall = $1; return 0; } #----------------------------------------------------------------------------- sub handle_TOPLEVEL() { my $pofiles = ""; my @restfiles = (); opendir (THISDIR, "."); foreach $entry (readdir(THISDIR)) { next if (-d $entry); next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); if ($entry =~ /\.po$/) { next; } push(@restfiles, $entry); } closedir (THISDIR); if (@restfiles) { $target_adds{"install-data-am"} .= "install-nls-files "; $lines = "install-nls-files:\n"; $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; for $file (@restfiles) { $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; } $target_adds{"uninstall"} .= "uninstall-nls-files "; $lines .= "uninstall-nls-files:\n"; for $file (@restfiles) { $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; } appendLines($lines); } return 0; } #----------------------------------------------------------------------------- sub tag_SUBDIRS () { if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { return 1; } my $subdirs = "."; opendir (THISDIR, "."); foreach $entry (readdir(THISDIR)) { next if ($entry eq "CVS" || $entry =~ /^\./); if (-d $entry && -f $entry . "/Makefile.am") { $subdirs .= " $entry"; next; } } closedir (THISDIR); my $lines = "SUBDIRS =$subdirs\n"; substituteLine('SUBDIRS\s*=.*', $lines); return 0; } sub tag_IDLFILES () { my @psources = split(/[\034\s]+/, $sources{$program}); my $dep_lines = ""; my @cppFiles = (); foreach $source (@psources) { my $skel = ($source =~ m/\.skel$/); my $stub = ($source =~ m/\.stub$/); my $signals = ($source =~ m/\.signals$/); if ($stub || $skel || $signals) { my $qs = quotemeta($source); $sources{$program} =~ s/$qs//; $sources_changed{$program} = 1; print STDOUT "adding IDL file $source\n" if ($verbose); $source =~ s/\.(stub|skel|signals)$//; my $sourcename; if ($skel) { $sourcename = "$source\_skel"; } elsif ($stub) { $sourcename = "$source\_stub"; } else { $sourcename = "$source\_signals"; } my $sourcedir = ''; if (-f "$makefileDir/$source.h") { $sourcedir = '$(srcdir)/'; } else { if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { $sourcedir = $1; $sourcedir .= "/" if ($sourcedir !~ /\/$/); } } if ($allidls !~ /$source\_kidl/) { $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOPIDL_DEPENDENCIES)\n"; $dep_lines .= "\t\$(DCOPIDL) $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; /bin/false )\n"; $allidls .= $source . "_kidl "; } if ($allidls !~ /$sourcename/) { $dep_lines_tmp = ""; if ($skel) { $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; } elsif ($stub) { $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; } else { # signals $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; } if ($stub || $signals) { $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; $dep_lines .= "$sourcename.h: $source.kidl\n"; $dep_lines .= $dep_lines_tmp; } $allidls .= $sourcename . " "; } $idlfiles{$program} .= $sourcename . " "; if ($program =~ /_la$/) { $realObjs{$program} .= " $sourcename.lo"; } else { $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; } $sources{$program} .= " $sourcename.$cxxsuffix"; $sources_changed{$program} = 1; $important{$program} .= "$sourcename.h " if (!$skel); $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; push(@cleanfiles, "$sourcename.$cxxsuffix"); push(@cleanfiles, "$sourcename.h"); push(@cleanfiles, "$sourcename.kidl"); $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); } } if ($dep_lines) { appendLines($dep_lines); } if (0) { my $lookup = "($program)"; $lookup .= '(|\$\(EXEEXT\))'; $lookup =~ s/\_/./g; $lookup .= ":(.*..$program\_OBJECTS..*)"; # $lookup = quotemeta($lookup); if ($MakefileData =~ /\n$lookup\n/) { my $line = "$1$2: "; foreach $file (split(' ', $idlfiles{$program})) { $line .= "$file.$cxxsuffix "; } $line .= $3; substituteLine($lookup, $line); } else { print STDERR "no built dependency found $lookup\n"; } } } sub tag_UIFILES () { my @psources = split(/[\034\s]+/, $sources{$program}); my $dep_lines = ""; my @depFiles = (); foreach $source (@psources) { if ($source =~ m/\.ui$/) { print STDERR "adding UI file $source\n" if ($verbose); my $qs = quotemeta($source); $sources{$program} =~ s/$qs//; $sources_changed{$program} = 1; $source =~ s/\.ui$//; my $sourcedir = ''; if (-f "$makefileDir/$source.ui") { $sourcedir = '$(srcdir)/'; } if (!$uiFiles{$source}) { $dep_lines .= "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; $dep_lines .= "\trm -f $source.$cxxsuffix\n"; if (!$kdeopts{"qtonly"}) { $dep_lines .= "\techo '#include ' > $source.$cxxsuffix\n"; my ($mangled_source) = $source; $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui | sed -e \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" | sed -e \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | sed -e \"s,image\\([0-9][0-9]*\\)_data,img\\1_" . $mangled_source . ",g\" >> $source.$cxxsuffix || rm -f $source.$cxxsuffix\n"; } else { $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix || rm -f $source.$cxxsuffix\n"; } $dep_lines .= "\techo '#include \"$source.moc\"' >> $source.$cxxsuffix\n\n"; $dep_lines .= "$source.h: $sourcedir$source.ui\n"; $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n"; $dep_lines .= "$source.moc: $source.h\n"; $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; $uiFiles{$source} = 1; $depedmocs{$program} .= " $source.moc"; $globalmocs{$source} = "\035$source.h\035$source.cpp"; } if ($program =~ /_la$/) { $realObjs{$program} .= " $source.lo"; } else { $realObjs{$program} .= " $source.\$(OBJEXT)"; } $sources{$program} .= " $source.$cxxsuffix"; $sources_changed{$program} = 1; $important{$program} .= "$source.h "; $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; push(@cleanfiles, "$source.$cxxsuffix"); push(@cleanfiles, "source.h"); push(@cleanfiles, "$source.moc"); $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); } } if ($dep_lines) { appendLines($dep_lines); } } sub tag_ICON() { my $lookup = '([^\s]*)_ICON\s*=\s*([^\n]*)'; my $install = ""; my $uninstall = ""; while ($MakefileData =~ /\n$lookup/og) { my $destdir; if ($1 eq "KDE") { $destdir = "kde_icondir"; } else { $destdir = $1 . "dir"; } my $iconauto = ($2 =~ /AUTO\s*$/); my @appnames = (); if ( ! $iconauto ) { my @_appnames = split(" ", $2); print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); foreach $appname (@_appnames) { push(@appnames, quotemeta($appname)); } } else { print STDOUT "KDE_ICON processing \n" if ($verbose); } my @files = (); opendir (THISDIR, "."); foreach $entry (readdir(THISDIR)) { next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); next if (! -f $entry); if ( $iconauto ) { push(@files, $entry) if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/); } else { foreach $appname (@appnames) { push(@files, $entry) if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/); } } } closedir (THISDIR); my %directories = (); foreach $file (@files) { my $newfile = $file; my $prefix = $file; $prefix =~ s/\.(png|xpm|mng)$//; my $appname = $prefix; $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; $appname = quotemeta($appname); $prefix =~ s/$appname$//; $prefix =~ s/-$//; $prefix = 'lo16-app' if ($prefix eq 'mini'); $prefix = 'lo32-app' if ($prefix eq 'lo'); $prefix = 'hi48-app' if ($prefix eq 'large'); $prefix .= '-app' if ($prefix =~ m/^...$/); my $type = $prefix; $type =~ s/^.*-([^-]+)$/$1/; $prefix =~ s/^(.*)-[^-]+$/$1/; my %type_hash = ( 'action' => 'actions', 'app' => 'apps', 'device' => 'devices', 'filesys' => 'filesystems', 'mime' => 'mimetypes' ); if (! defined $type_hash{$type} ) { print STDERR "unknown icon type $type in $printname ($file)\n"; next; } my %dir_hash = ( 'los' => 'locolor/16x16', 'lom' => 'locolor/32x32', 'him' => 'hicolor/32x32', 'hil' => 'hicolor/48x48', 'lo16' => 'locolor/16x16', 'lo22' => 'locolor/22x22', 'lo32' => 'locolor/32x32', 'hi16' => 'hicolor/16x16', 'hi22' => 'hicolor/22x22', 'hi32' => 'hicolor/32x32', 'hi48' => 'hicolor/48x48', 'hi64' => 'hicolor/64x64', 'hisc' => 'hicolor/scalable' ); $newfile =~ s@.*-($appname\.(png|xpm|mng?))@$1@; if (! defined $dir_hash{$prefix}) { print STDERR "unknown icon prefix $prefix in $printname\n"; next; } my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; if ($newfile =~ /-[^\.]/) { my $tmp = $newfile; $tmp =~ s/^([^-]+)-.*$/$1/; $dir = $dir . "/" . $tmp; $newfile =~ s/^[^-]+-//; } if (!defined $directories{$dir}) { $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; $directories{$dir} = 1; } $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; } } if (length($install)) { $target_adds{"install-data-am"} .= "install-kde-icons "; $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); } } sub handle_POFILES($$) { my @pofiles = split(" ", $_[0]); my $lang = $_[1]; # Build rules for creating the gmo files my $tmp = ""; my $allgmofiles = ""; my $pofileLine = "POFILES ="; foreach $pofile (@pofiles) { $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension $tmp .= "$1.gmo: $pofile\n"; $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; $allgmofiles .= " $1.gmo"; $pofileLine .= " $1.po"; } appendLines ($tmp); my $lookup = 'POFILES\s*=([^\n]*)'; if ($MakefileData !~ /\n$lookup/o) { appendLines("$pofileLine\nGMOFILES =$allgmofiles"); } else { substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); } if ($allgmofiles) { # Add the "clean" rule so that the maintainer-clean does something appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); $target_adds{"maintainer-clean"} .= "clean-nls "; $lookup = 'DISTFILES\s*=\s*(.*)'; if ($MakefileData =~ /\n$lookup\n/o) { $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; substituteLine ($lookup, $tmp); } } $target_adds{"install-data-am"} .= "install-nls "; $tmp = "install-nls:\n"; if ($lang) { $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; } $tmp .= "\t\@for base in "; foreach $pofile (@pofiles) { $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension $tmp .= "$1 "; } $tmp .= "; do \\\n"; if ($lang) { $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; $tmp .= "\t test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n" } else { $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; $tmp .= "\t test ! -f \$\$base.gmo || \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; } $tmp .= "\tdone\n\n"; appendLines ($tmp); $target_adds{"uninstall"} .= "uninstall-nls "; $tmp = "uninstall-nls:\n"; foreach $pofile (@pofiles) { $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension if ($lang) { $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; } else { $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; } } appendLines($tmp); $target_adds{"all"} .= "all-nls "; $tmp = "all-nls: \$(GMOFILES)\n"; appendLines($tmp); $target_adds{"distdir"} .= "distdir-nls "; $tmp = "distdir-nls:\$(GMOFILES)\n"; $tmp .= "\tfor file in \$(POFILES); do \\\n"; $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; $tmp .= "\tdone\n"; $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; $tmp .= "\tdone\n"; appendLines ($tmp); if (!$lang) { appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); } } #----------------------------------------------------------------------------- # Returns 0 if the line was processed - 1 otherwise. # Errors are logged in the global $errorflags sub tag_POFILES () { my $lookup = 'POFILES\s*=([^\n]*)'; return 1 if ($MakefileData !~ /\n$lookup/o); print STDOUT "POFILES processing <$1>\n" if ($verbose); my $tmp = $1; # make sure these are all gone. if ($MakefileData =~ /\n\.po\.gmo:\n/) { print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; return 1; } # Either find the pofiles in the directory (AUTO) or use # only the specified po files. my $pofiles = ""; if ($tmp =~ /^\s*AUTO\s*$/) { opendir (THISDIR, "."); $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); closedir (THISDIR); print STDOUT "pofiles found = $pofiles\n" if ($verbose); if (-f "charset" && -f "kdelibs.po") { handle_TOPLEVEL(); } } else { $tmp =~ s/\034/ /g; $pofiles = $tmp; } return 1 if (!$pofiles); # Nothing to do handle_POFILES($pofiles, $kdelang); return 0; } sub helper_LOCALINSTALL($) { my $lookup = "\n" . $_[0] . ":"; if ($MakefileData =~ /($lookup)/) { my $install = $MakefileData; $install =~ s/\n/\035/g; $install =~ s/.*\035$_[0]:[^\035]*\035//; my $emptyline = 0; while (! $emptyline) { if ($install =~ /([^\035]*)\035(.*)/) { local $line = $1; $install = $2; if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { $emptyline = 1; } else { replaceDestDir($line); } } else { $emptyline = 1; } } } } sub tag_LOCALINSTALL () { helper_LOCALINSTALL('install-exec-local'); helper_LOCALINSTALL('install-data-local'); helper_LOCALINSTALL('uninstall-local'); return 0; } sub replaceDestDir($) { local $line = $_[0]; if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) { $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); } if ($line ne $_[0]) { $_[0] = quotemeta $_[0]; substituteLine($_[0], $line); } } #--------------------------------------------------------------------------- sub tag_CLOSURE () { return if ($program !~ /_la$/); my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; $MakefileData =~ m/$lookup/; return if ($1 !~ /CXXLINK/); if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); return; } my $closure = $realname{$program} . ".closure"; my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; $lines .= "\t\@rm -f $program\_closure.* $closure\n"; $lines .= "\t\@echo \"timestamp\" > $closure\n"; $lines .= "\n"; appendLines($lines); $lookup = $realname{$program} . ": (.*)"; if ($MakefileData =~ /\n$lookup\n/) { $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; substituteLine($lookup, $lines); } $closure_output .= " $closure"; } sub tag_DIST () { my %foundfiles = (); opendir (THISDIR, "."); foreach $entry (readdir(THISDIR)) { next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile$$/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); next if (! -f $entry); next if ($entry =~ /\.moc/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); next if ($entry =~ /.+meta_unload.$cppExt$/ || $entry =~ /\.all_$cppExt\.$cppExt$/); $foundfiles{$entry} = 1; } closedir (THISDIR); # doing this for MAINTAINERCLEANFILES would be wrong my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); foreach $mark (@marks) { while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) { foreach $file (split('[\034\s]', $2)) { $file =~ s/\.\///; $foundfiles{$file} = 0 if (defined $foundfiles{$file}); } } } my @files = ("Makefile", "config.cache", "config.log", "stamp-h", "stamp-h1", "stamp-h1", "config.h", "Makefile", "config.status", "config.h", "libtool"); foreach $file (@files) { $foundfiles{$file} = 0 if (defined $foundfiles{$file}); } my $KDE_DIST = ""; foreach $file (keys %foundfiles) { if ($foundfiles{$file} == 1) { $KDE_DIST .= "$file "; } } if ($KDE_DIST) { print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); my $lookup = "DISTFILES *=(.*)"; if ($MakefileData =~ /\n$lookup\n/o) { substituteLine($lookup, "KDE_DIST=$KDE_DIST\n\nDISTFILES=$1 \$(KDE_DIST)\n"); } } } #----------------------------------------------------------------------------- # Returns 0 if the line was processed - 1 otherwise. # Errors are logged in the global $errorflags sub tag_DOCFILES () { # if ($MakefileData =~ /\nSUBDIRS\s*=/) { # subdirs # $MakefileData =~ /\n(.*-recursive:\s*)\n/; # my $orig_rules = $1; # my $rules = $orig_rules; # $rules =~ s/:\s*$//; # substituteLine($orig_rules, "$rules docs-recursive:"); # appendLines("docs: docs-recursive docs-am\n"); # } else { # appendLines("docs: docs-am\n"); # } $target_adds{"all"} .= "docs-am "; my $lookup = 'KDE_DOCS\s*=\s*([^\n]*)'; goto nodocs if ($MakefileData !~ /\n$lookup/o); print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); my $tmp = $1; # Either find the files in the directory (AUTO) or use # only the specified po files. my $files = ""; my $appname = $tmp; $appname =~ s/^(\S*)\s*.*$/$1/; if ($appname =~ /AUTO/) { $appname = basename($makefileDir); if ("$appname" eq "en") { print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; exit(1); } } if ($tmp !~ / - /) { opendir (THISDIR, "."); foreach $entry (readdir(THISDIR)) { next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); next if (! -f $entry); $files .= "$entry "; } closedir (THISDIR); print STDOUT "docfiles found = $files\n" if ($verbose); } else { $tmp =~ s/\034/ /g; $tmp =~ s/^\S*\s*-\s*//; $files = $tmp; } goto nodocs if (!$files); # Nothing to do if ($files =~ /(^| )index\.docbook($| )/) { my $lines = ""; my $lookup = 'MEINPROC\s*='; if ($MakefileData !~ /\n($lookup)/) { $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; } $lookup = 'KDE_XSL_STYLESHEET\s*='; if ($MakefileData !~ /\n($lookup)/) { $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; } $lookup = '\nindex.cache.bz2:'; if ($MakefileData !~ /\n($lookup)/) { $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; $lines .= "\t-\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; $lines .= "\n"; } $lines .= "docs-am: index.cache.bz2\n"; $lines .= "\n"; $lines .= "install-docs: docs-am install-nls\n"; $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; $lines .= "\tfi\n"; $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; $lines .= "\n"; $lines .= "uninstall-docs:\n"; $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n"; $lines .= "\n"; $lines .= "clean-docs:\n"; $lines .= "\t-rm -f index.cache.bz2\n"; $lines .= "\n"; $target_adds{"install-data-am"} .= "install-docs "; $target_adds{"uninstall"} .= "uninstall-docs "; $target_adds{"clean-am"} .= "clean-docs "; appendLines ($lines); } else { appendLines("docs-am: $files\n"); } $target_adds{"install-data-am"} .= "install-nls"; $target_adds{"uninstall"} .= "uninstall-nls "; $tmp = "install-nls:\n"; $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; $tmp .= "\t\@for base in $files; do \\\n"; $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; $tmp .= "\tdone\n"; if ($appname eq 'common') { $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; $tmp .= "\tif test ! -e \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; $tmp .= "\t case \" $files \" in \\\n"; $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; $tmp .= "\t *) test ! -e \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; $tmp .= "\t esac ; \\\n"; $tmp .= "\tdone ; fi ; true\n"; } $tmp .= "\n"; $tmp .= "uninstall-nls:\n"; $tmp .= "\tfor base in $files; do \\\n"; $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; $tmp .= "\tdone\n\n"; appendLines ($tmp); $target_adds{"distdir"} .= "distdir-nls "; $tmp = "distdir-nls:\n"; $tmp .= "\tfor file in $files; do \\\n"; $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; $tmp .= "\tdone\n"; appendLines ($tmp); return 0; nodocs: appendLines("docs-am:\n"); return 1; } #----------------------------------------------------------------------------- # Find headers in any of the source directories specified previously, that # are candidates for "moc-ing". sub findMocCandidates () { foreach $dir (@headerdirs) { my @list = (); opendir (SRCDIR, "$dir"); @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); closedir SRCDIR; foreach $hf (@hFiles) { next if ($hf =~ /^\.\#/); $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension next if ($uiFiles{$1}); open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; my $hfsize = 0; seek(HFIN, 0, 2); $hfsize = tell(HFIN); seek(HFIN, 0, 0); read HFIN, $hfData, $hfsize; close HFIN; # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT if ( $hfData =~ /{([^}]*)Q_OBJECT/s ) { ## handle " { friend class blah; Q_OBJECT " push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## handle "// Q_OBJECT" } } # The assoc array of root of headerfile and header filename foreach $hFile (@list) { $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension if ($mocFiles{$1}) { print STDERR "Warning: Multiple header files found for $1\n"; next; # Use the first one } $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir } } return 0; } #----------------------------------------------------------------------------- # The programmer has specified a moc list. Prune out the moc candidates # list that we found based on looking at the header files. This generates # a warning if the programmer gets the list wrong, but this doesn't have # to be fatal here. sub pruneMocCandidates ($) { my %prunedMoc = (); local @mocList = split(' ', $_[0]); foreach $mocname (@mocList) { $mocname =~ s/\.moc$//; if ($mocFiles{$mocname}) { $prunedMoc{$mocname} = $mocFiles{$mocname}; } else { my $print = $makefileDir; $print =~ s/^\Q$topdir\E\\//; # They specified a moc file but we can't find a header that # will generate this moc file. That's possible fatal! print STDERR "Warning: No moc-able header file for $print/$mocname\n"; } } undef %mocFiles; %mocFiles = %prunedMoc; } #----------------------------------------------------------------------------- # Finds the cpp files (If they exist). # The cpp files get appended to the header file separated by \035 sub checkMocCandidates () { my @cppFiles; my $cpp2moc; # which c++ file includes which .moc files my $moc2cpp; # which moc file is included by which c++ files return unless (keys %mocFiles); opendir(THISDIR, ".") || return; @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o && !/.+\.all_$cppExt\.$cppExt$/o && !/^\./ } readdir(THISDIR); closedir THISDIR; return unless (@cppFiles); my $files = join (" ", @cppFiles); $cpp2moc = {}; $moc2cpp = {}; foreach $cxxf (@cppFiles) { open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; seek(CXXFIN, 0, 2); my $cxxfsize = tell(CXXFIN); seek(CXXFIN, 0, 0); read CXXFIN, $cxxfData, $cxxfsize; close CXXFIN; while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { $cpp2moc->{$cxxf}->{$1} = 1; $moc2cpp->{$1}->{$cxxf} = 1; } } foreach my $mocFile (keys (%mocFiles)) { @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; if (@cppFiles == 1) { $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; push(@deped, $mocFile); } elsif (@cppFiles == 0) { push (@newObs, $mocFile); # Produce new object file next if ($haveAutomocTag); # This is expected... # But this is an error we can deal with - let them know print STDERR "Warning: No c++ file that includes $mocFile.moc\n"; } else { # We can't decide which file to use, so it's fatal. Although as a # guess we could use the mocFile.cpp file if it's in the list??? print STDERR "Error: Multiple c++ files that include $mocFile.moc\n"; print STDERR "\t",join ("\t", @cppFiles),"\n"; $errorflag = 1; delete $mocFiles{$mocFile}; # Let's continue and see what happens - They have been told! } } } #----------------------------------------------------------------------------- # Add the rules for generating moc source from header files # For Automoc output *.moc.cpp but normally we'll output *.moc # (We must compile *.moc.cpp separately. *.moc files are included # in the appropriate *.cpp file by the programmer) sub addMocRules () { my $cppFile; my $hFile; foreach $mocFile (keys (%mocFiles)) { undef $cppFile; ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); $dir =~ s#^\.#\$(srcdir)#; if (defined ($cppFile)) { $target_adds{"\$(srcdir)/$cppFile"} .= "$mocFile.moc "; appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); $cleanMoc .= " $mocFile.moc"; } else { appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); $cleanMoc .= " $mocFile$mocExt"; } } } sub make_meta_classes () { return if ($kdeopts{"qtonly"}); my $cppFile; my $hFile; my $moc_class_headers = ""; foreach $program (@programs) { my $mocs = ""; my @progsources = split(/[\s\034]+/, $sources{$program}); my @depmocs = split(' ', $depedmocs{$program}); my %shash = (), %mhash = (); @shash{@progsources} = 1; # we are only interested in the existence @mhash{@depmocs} = 1; print STDOUT "program=$program\n" if ($verbose); print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); foreach my $mocFile (keys (%globalmocs)) { undef $cppFile; ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); $dir =~ s#^\.#\$(srcdir)#; if (defined ($cppFile)) { $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; } else { # Bah. This is the case, if no C++ file includes the .moc # file. We make a .moc.cpp file for that. Unfortunately this # is not included in the %sources hash, but rather is mentioned # in %depedmocs. If the user wants to use AUTO he can't just # use an unspecific METAINCLUDES. Instead he must use # program_METAINCLUDES. Anyway, it's not working real nicely. # E.g. Its not clear what happens if user specifies two # METAINCLUDES=AUTO in the same Makefile.am. $mocs .= " $mocFile.moc.$cxxsuffix" if exists $mhash{$mocFile.".moc.$cxxsuffix"}; } } if ($mocs) { print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); my $sourcename = $program."_meta_unload"; my $ext = ($program =~ /_la$/) ? ".lo" : ".o"; my $srcfile = $sourcename.".$cxxsuffix"; my $objfile = $sourcename.$ext; $moc_class_headers .= " $srcfile"; my $appl; $appl = "$srcfile: $mocs\n"; $appl .= "\t\@echo 'creating $srcfile'\n"; $appl .= "\t\@-rm -f $srcfile\n"; $appl .= "\t\@if test \${kde_qtver} = 2; then \\\n"; $appl .= "\t\techo 'static const char * _metalist_$program\[\] = {' > $srcfile ;\\\n"; $appl .= "\t\tcat $mocs | grep 'char.*className' | "; $appl .= "sed -e 's/.*[^A-Za-z0-9_:]\\([A-Za-z0-9_:]*\\)::className.*\$\$/\\\"\\1\\\",/' | sort | uniq >> $srcfile ;\\\n"; $appl .= "\t\techo '0};' >> $srcfile ;\\\n"; $appl .= "\t\techo '#include ' >> $srcfile ;\\\n"; $appl .= "\t\techo '_UNLOAD($program)' >> $srcfile ;\\\n"; $appl .= "\telse echo > $srcfile; fi\n"; $appl .= "\n"; $realObjs{$program} .= " \034" . $objfile . " "; $sources{$program} .= " $srcfile"; $sources_changed{$program} = 1; $dep_files .= " \$(DEPDIR)/$sourcename.P" if($dep_files !~/$sourcename.P/); appendLines ($appl); } print STDOUT "\n" if $verbose; } if ($moc_class_headers) { appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; } } #----------------------------------------------------------------------------- sub updateMakefile () { return if ($dryrun); open (FILEOUT, "> $makefile") || die "Could not create $makefile: $!\n"; print FILEOUT "\# $progId - " . '$Revision: 1.305 $ ' . "\n"; $MakefileData =~ s/\034/\\\n\t/g; # Restore continuation lines print FILEOUT $MakefileData; close FILEOUT; } #----------------------------------------------------------------------------- # The given line needs to be removed from the makefile # Do this by adding the special "removed line" comment at the line start. sub removeLine ($$) { my ($lookup, $old) = @_; $old =~ s/\034/\\\n#>- /g; # Fix continuation lines $MakefileData =~ s/\n$lookup/\n#>\- $old/; } #----------------------------------------------------------------------------- # Replaces the old line with the new line # old line(s) are retained but tagged as removed. The new line(s) have the # "added" tag placed before it. sub substituteLine ($$) { my ($lookup, $new) = @_; if ($MakefileData =~ /\n($lookup)/) { $old = $1; $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines $new =~ s/\034/\\\n\t/g; my $newCount = ($new =~ tr/\n//) + 1; $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; } else { print STDERR "Warning: substitution of \"$lookup\" in $printname failed\n"; } } #----------------------------------------------------------------------------- # Slap new lines on the back of the file. sub appendLines ($) { my ($new) = @_; $new =~ s/\034/\\\n\t/g; # Fix continuation lines my $newCount = ($new =~ tr/\n//) + 1; $MakefileData .= "\n#>\+ $newCount\n$new"; } #----------------------------------------------------------------------------- # Restore the Makefile.in to the state it was before we fiddled with it sub restoreMakefile () { $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; # Restore removed lines $MakefileData =~ s/([\n\034])#>\- /$1/g; # Remove added lines while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) { my $newCount = $1; my $removeLines = ""; while ($newCount--) { $removeLines .= "[^\n\034]*([\n\034]|)"; } $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; } } #----------------------------------------------------------------------------- kdocumenteditor-1.0/admin/conf.change.pl0100644000076400007640000001165007735744575020340 0ustar tasukuhomeuser#!/usr/bin/perl -w # this script patches a config.status file, to use our own perl script # in the main loop # we do it this way to circumvent hacking (and thereby including) # autoconf function (which are GPL) into our LGPL acinclude.m4.in # written by Michael Matz # adapted by Dirk Mueller # # This file is free software; you can redistribute it and/or # modify it under the terms of the GNU Library General Public # License as published by the Free Software Foundation; either # version 2 of the License, or (at your option) any later version. # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # You should have received a copy of the GNU Library General Public License # along with this library; see the file COPYING.LIB. If not, write to # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # we have to change two places # 1. the splitting of the substitutions into chunks of 90 (or even 48 in # later autoconf's # 2. the big main loop which patches all Makefile.in's use File::Basename; my $ac_aux_dir = dirname($0); my ($flag); local $ac_version = 0; my $vpath_seen = 0; $flag = 0; while (<>) { # usage of $flag: 0 -- we have seen nothing yet # 1 -- we are in (1) # 2 -- we have ended (1) # 3 -- we are in (2) # 4 -- we ended (2) if ($flag == 4) { print; } elsif ($flag == 0) { # 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." # ends with (excluding) "CONFIG_FILE=..." # in later autoconf (2.14.1) there is no CONFIG_FILES= line, # but instead the (2) directly follow (1) if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { $flag = 1; if ($1 eq 'lines') { # lets hope its different with 2141, # wasn't able to verify that if ($2 eq '48') { $ac_version = 250; } else { $ac_version = 2141; } } elsif ($1 eq 'cmds') { $ac_version = 213; } # hmm, we don't know the autoconf version, but we try anyway } else { print; } } elsif ($flag == 1) { if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { print; $flag = 2; } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { $flag = 3; } } elsif ($flag == 2) { # 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) # end with: "rm -f conftest.s\*" # on autoconf 250, it ends with '# CONFIG_HEADER section' if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { $flag = 3; } else { print; } } elsif ($flag == 3) { if (/^\s*rm\s+-f\s+conftest/ ) { $flag = 4; &insert_main_loop(); } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { $flag = 4; &insert_main_loop(); #die "hhhhhhh"; if ($ac_version != 2141) { print STDERR "hmm, don't know autoconf version\n"; } } elsif (/^\#\s*CONFIG_HEADER section.*/) { $flag = 4; &insert_main_loop(); if($ac_version != 250) { print STDERR "hmm, something went wrong :-(\n"; } } elsif (/VPATH/ ) { $vpath_seen = 1; } } } die "wrong input (flag != 4)" unless $flag == 4; print STDERR "hmm, don't know autoconf version\n" unless $ac_version; sub insert_main_loop { if ($ac_version == 250) { &insert_main_loop_250(); } else { &insert_main_loop_213(); } } sub insert_main_loop_250 { print <>\$tmp/subs.sed EOF } print <> \$tmp/subs.files fi done if test -f \$tmp/subs.files ; then perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" fi rm -f \$tmp/subs.files fi EOF return; } sub insert_main_loop_213 { print <> \$ac_cs_root.subs EOF } print <> \$ac_cs_root.sacfiles fi done if test -f \$ac_cs_root.sacfiles ; then perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" fi rm -f \$ac_cs_root.s* EOF return; } kdocumenteditor-1.0/admin/config.pl0100644000076400007640000001550507735744575017437 0ustar tasukuhomeuser#!/usr/bin/perl # a script for use by autoconf to make the Makefiles # from the Makefile.in's # # the original autoconf mechanism first splits all substitutions into groups # of ca. 90, and than invokes sed for _every_ Makefile.in and every group # (so around 2-3 times per Makefile.in). So this takes forever, as sed # has to recompile the regexps every time. # # this script does better. It changes all Makefile.ins in one process. # in kdelibs the time for building Makefile went down from 2:59 min to 13 sec! # # written by Michael Matz # adapted by Dirk Mueller # This file is free software; you can redistribute it and/or # modify it under the terms of the GNU Library General Public # License as published by the Free Software Foundation; either # version 2 of the License, or (at your option) any later version. # This library is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # Library General Public License for more details. # You should have received a copy of the GNU Library General Public License # along with this library; see the file COPYING.LIB. If not, write to # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. my $ac_subs=$ARGV[0]; my $ac_sacfiles = $ARGV[1]; my $ac_given_srcdir=$ARGV[2]; my $ac_given_INSTALL=$ARGV[3]; #print "ac_subs=$ac_subs\n"; #print "ac_sacfiles=$ac_sacfiles\n"; #print "ac_given_srcdir=$ac_given_srcdir\n"; #print "ac_given_INSTALL=$ac_given_INSTALL\n"; my ($srcdir, $top_srcdir); my $INSTALL; my $bad_perl = ($] < 5.005); open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; my @subs = ; close(CF); chomp @subs; @comp_match=(); @comp_subs=(); if ($bad_perl) { print "Using perl older than version 5.005\n"; foreach my $pat (@subs) { if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || ($pat =~ m%/([^/]*)/([^/]*)/g% ) || ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || ($pat =~ m%/([^/]*)/([^/]*)/;t% ) || ($pat =~ /s,([^,]*),(.*),;t/) ) { # form : s%bla%blubb%g # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) # or s,bla,blubb,;t t (autoconf 2.52) my $srch = $1; my $repl = $2; $repl =~ s/\\(.)/$1/g; push @comp_subs, make_closure($srch, $repl); } elsif ( ($pat =~ /%([^%]*)%d/ ) || ($pat =~ m%/([^/]*)/d% ) ) { push @comp_subs, make_closure($1, ""); } else { die "Uhh. Malformed pattern in $ac_subs ($pat)" unless ( $pat =~ /^\s*$/ ); # ignore white lines } } } else { foreach my $pat (@subs) { if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || ($pat =~ /s,([^,]*),(.*),;t/) ) { # form : s%bla%blubb%g # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) # or s,bla,blubb,;t t (autoconf 2.52) my $srch = $1; my $repl = $2; push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern $repl =~ s/\\(.)/$1/g; push @comp_subs, $repl; } elsif ( ($pat =~ /%([^%]*)%d/ ) || ($pat =~ m%/([^/]*)/d% ) ) { push @comp_match, eval "qr/\Q$1\E/"; push @comp_subs, ""; } else { die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)" unless ( $pat =~ /^\s*$/ ); # ignore white lines } } } undef @subs; # read the list of files to be patched, form: # ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; my @ac_files = ; close(CF); chomp @ac_files; my $ac_file; foreach $ac_file (@ac_files) { next if $ac_file =~ /\.\./; next if $ac_file =~ /^\s*$/; my $ac_file_in; my ($ac_dir, $ac_dots, $ac_dir_suffix); if ($ac_file =~ /.*:.*/ ) { ($ac_file_in = $ac_file) =~ s%[^:]*:%%; $ac_file =~ s%:.*%%; } else { $ac_file_in = $ac_file.".in"; } # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { # The file is in a subdirectory. if (! -d "$ac_dir") { mkdir "$ac_dir", 0777; } ($ac_dir_suffix = $ac_dir) =~ s%^./%%; $ac_dir_suffix="/".$ac_dir_suffix; # A "../" for each directory in $ac_dir_suffix. ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; } else { $ac_dir_suffix=""; $ac_dots=""; } if ($ac_given_srcdir eq ".") { $srcdir="."; if ($ac_dots) { ( $top_srcdir = $ac_dots) =~ s%/$%%; } else { $top_srcdir="."; } } elsif ($ac_given_srcdir =~ m%^/%) { $srcdir=$ac_given_srcdir.$ac_dir_suffix; $top_srcdir = $ac_given_srcdir; } else { $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; $top_srcdir = $ac_dots.$ac_given_srcdir; } if ($ac_given_INSTALL) { if ($ac_given_INSTALL =~ m%^/% ) { $INSTALL = $ac_given_INSTALL; } else { $INSTALL = $ac_dots.$ac_given_INSTALL; } } print "fast creating $ac_file\n"; unlink $ac_file; my $ac_comsub=""; my $fname=$ac_file_in; $fname =~ s%.*/%%; my $configure_input="Generated automatically from $fname by config.pl."; if ($ac_file =~ /.*[Mm]akefile.*/) { $ac_comsub="# ".$configure_input."\n"; # for the first line in $ac_file } my $ac_file_inputs; ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; patch_file($ac_file, $ac_file_inputs, $ac_comsub); } sub patch_file { my ($outf, $infiles, $firstline) = @_; my $filedata; my @infiles=split(' ', $infiles); my $i=0; if ($firstline) { $filedata = $firstline; } foreach my $name (@infiles) { if (open(CF, "< $name")) { while () { $filedata .= $_; } close(CF); } else { print STDERR "can't open $name: $!"."\n"; } } $filedata =~ s%\@configure_input\@%$configure_input%g; $filedata =~ s%\@srcdir\@%$srcdir%g; $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; $filedata =~ s%\@INSTALL\@%$INSTALL%g; if ($bad_perl) { while ($i <= $#comp_subs) { my $ref = $comp_subs[$i]; &$ref(\$filedata); $i++; } } else { while ($i <= $#comp_match) { $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; $i++; } } open(CF, "> $outf") || die "can't create $outf: $!"; print CF $filedata; close(CF); } sub make_closure { my ($pat, $sub) = @_; $pat =~ s/\@/\\@/g; # @bla@ -> \@bla\@ $pat =~ s/\$/\\\$/g; # $bla -> \$bla $sub =~ s/\@/\\@/g; $sub =~ s/\$/\\\$/g; my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%$pat%$sub%g; }"; if ($@) { print "can't create CODE: $@\n"; } return $ret; } kdocumenteditor-1.0/admin/configure.in.bot.end0100644000076400007640000000051407735744575021470 0ustar tasukuhomeuserif test "$all_tests" = "bad"; then if test ! "$cache_file" = "/dev/null"; then echo "" echo "Please remove the file $cache_file after changing your setup" echo "so that configure will find the changes next time." echo "" fi else echo "" echo "Good - your configure finished. Start make now" echo "" fi kdocumenteditor-1.0/admin/configure.in.min0100644000076400007640000000360007735744575020721 0ustar tasukuhomeuserdnl This file is part of the KDE libraries/packages dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. # Original Author was Kalle@kde.org # I lifted it in some mater. (Stephan Kulow) # I used much code from Janos Farkas dnl Process this file with autoconf to produce a configure script. AC_INIT(acinclude.m4) dnl a source file from your sub dir dnl This is so we can use kde-common AC_CONFIG_AUX_DIR(admin) dnl This ksh/zsh feature conflicts with `cd blah ; pwd` unset CDPATH dnl Checking host/target/build systems, for make, install etc. AC_CANONICAL_SYSTEM dnl Perform program name transformation AC_ARG_PROGRAM dnl Automake doc recommends to do this only here. (Janos) AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs KDE_SET_PREFIX dnl generate the config header AM_CONFIG_HEADER(config.h) dnl at the distribution this done dnl Checks for programs. AC_CHECK_COMPILERS AC_ENABLE_SHARED(yes) AC_ENABLE_STATIC(no) KDE_PROG_LIBTOOL dnl for NLS support. Call them in this order! dnl WITH_NLS is for the po files AM_KDE_WITH_NLS dnl KDE_USE_QT AC_PATH_KDE kdocumenteditor-1.0/admin/cvs-clean.pl0100644000076400007640000000405107735744575020037 0ustar tasukuhomeuser#! /usr/bin/perl # # This script recursively (beginning with the current directory) # wipes out everything not registered in CVS. # # written by Oswald Buddenhagen # inspired by the "old" cvs-clean target from Makefile.common # # This file is free software in terms of the BSD licence. That means # that you can do anything with it except removing this license or # the above copyright notice. There is NO WARRANTY of any kind. # sub rmrf() { my $fn = shift; lstat ($fn); if (-d _) { if (opendir (DIR, $fn)) { for my $efn (grep (!/^\.\.?$/, readdir (DIR))) { &rmrf ($fn."/".$efn); } closedir (DIR); rmdir ($fn); } } else { unlink ($fn); } } sub newfiles() { my ($indir, $incvs) = @_; for my $n (keys (%$incvs)) { delete $$indir{$n} } return sort (keys (%$indir)); } sub cvsclean() { my $dir = shift; my (%dirsdir, %filesdir, %dirscvs, %filescvs); my $dnam = $dir ? $dir : "."; if (!opendir (DIR, $dnam)) { print STDERR "Cannot enter \"".$dnam."\".\n"; return; } for my $fn (grep (!/^\.\.?$/, readdir (DIR))) { if (-d $dir.$fn) { $fn eq "CVS" or $dirsdir{$fn} = 1; } else { $filesdir{$fn} = 1; } } closedir (DIR); if (!open (FILE, "<".$dir."CVS/Entries")) { print STDERR "No CVS information in \"".$dnam."\".\n"; return; } while () { m%^D/([^/]+)/.*$% and $dirscvs{$1} = 1; m%^/([^/]+)/.*$% and $filescvs{$1} = 1; } close (FILE); if (open (FILE, "<".$dir."CVS/Entries.Log")) { while () { m%^A D/([^/]+)/.*$% and $dirscvs{$1} = 1; m%^A /([^/]+)/.*$% and $filescvs{$1} = 1; m%^R D/([^/]+)/.*$% and delete $dirscvs{$1}; m%^R /([^/]+)/.*$% and delete $filescvs{$1}; } close (FILE); } for my $fn (&newfiles (\%filesdir, \%filescvs)) { print ("F ".$dir.$fn."\n"); &rmrf ($dir.$fn); } for my $fn (&newfiles (\%dirsdir, \%dirscvs)) { print ("D ".$dir.$fn."\n"); &rmrf ($dir.$fn); } for my $fn (sort (keys (%dirscvs))) { &cvsclean ($dir.$fn."/"); } } &cvsclean (""); kdocumenteditor-1.0/admin/cvs.sh0100644000076400007640000003426207735744575016765 0ustar tasukuhomeuser#! /bin/sh # # cvs.sh # # This file contains support code from Makefile.common # It defines a shell function for each known target # and then does a case to call the correct function. call_and_fix_autoconf() { $AUTOCONF || exit 1 if test -r configure.in.in ; then perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure fi } strip_makefile() { if test -f $makefile_wo; then :; else perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo fi } check_autotool_versions() { AUTOCONF_VERSION=`$AUTOCONF --version | head -1` case $AUTOCONF_VERSION in Autoconf*2.5* | autoconf*2.5* ) : ;; "" ) echo "*** AUTOCONF NOT FOUND!." echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" exit 1 ;; * ) echo "*** YOU'RE USING $AUTOCONF_VERSION." echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" exit 1 ;; esac AUTOHEADER_VERSION=`$AUTOHEADER --version | head -1` case $AUTOHEADER_VERSION in Autoconf*2.5* | autoheader*2.5* ) : ;; "" ) echo "*** AUTOHEADER NOT FOUND!." echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" exit 1 ;; * ) echo "*** YOU'RE USING $AUTOHEADER_VERSION." echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" exit 1 ;; esac AUTOMAKE_STRING=`$AUTOMAKE --version | head -1` case $AUTOMAKE_STRING in automake*1.5d* | automake*1.5* | automake*1.5-* ) echo "*** YOU'RE USING $AUTOMAKE_STRING." echo "*** KDE requires automake 1.6.1 or newer" exit 1 ;; automake*1.6.* | automake*1.7* ) : ;; "" ) echo "*** AUTOMAKE NOT FOUND!." echo "*** KDE requires automake 1.6.1 or newer" exit 1 ;; unsermake* ) : echo "*** YOU'RE USING UNSERMAKE." echo "*** GOOD LUCK!! :)" ;; * ) echo "*** YOU'RE USING $AUTOMAKE_STRING." echo "*** KDE requires automake 1.6" exit 1 ;; esac } cvs() { check_autotool_versions ### Produce acinclude.m4 if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then echo "*** Creating acinclude.m4" rm -f acinclude.m4 configure.files strip_makefile $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 fi ### Make new subdirs and configure.in. ### The make calls could be optimized away here, ### with a little thought. if test -r configure.in.in; then rm -f subdirs configure.in echo "*** Creating list of subdirectories" subdirs echo "*** Creating configure.in" configure_files strip_makefile $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 fi echo "*** Creating aclocal.m4" $ACLOCAL || exit 1 echo "*** Creating configure" call_and_fix_autoconf if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then echo "*** Creating config.h template" $AUTOHEADER || exit 1 fi echo "*** Creating Makefile templates" $AUTOMAKE || exit 1 if test -z "$UNSERMAKE"; then echo "*** Postprocessing Makefile templates" perl -w admin/am_edit || exit 1 fi if egrep "^cvs-local:" $makefile_am >/dev/null; then \ strip_makefile $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 fi echo "*** Creating date/time stamp" touch stamp-h.in echo "*** Finished" echo " Don't forget to run ./configure" echo " If you haven't done so in a while, run ./configure --help" } dist() { check_autotool_versions ### ### First build all of the files necessary to do just "make" ### if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then strip_makefile $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 fi if test -r configure.in.in; then subdirs configure_files strip_makefile $MAKE -f $makefile_wo top_srcdir=. ./configure.in fi $ACLOCAL $AUTOHEADER $AUTOMAKE --foreign --include-deps perl -w admin/am_edit call_and_fix_autoconf touch stamp-h.in if grep "^cvs-local:" $makefile_am >/dev/null; then strip_makefile $MAKE -f $makefile_wo cvs-local top_srcdir=. fi ### ### Then make messages ### if test -d po; then LIST=`find ./po -name "*.po"` for i in $LIST; do file2=`echo $i | sed -e "s#\.po#\.gmo#"` msgfmt -o $file2 $i || touch $file2 done fi if grep "^cvs-dist-local:" $makefile_am >/dev/null; then strip_makefile $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. fi } subdir_dist() { $ACLOCAL $AUTOHEADER $AUTOMAKE --foreign --include-deps perl -w ../admin/am_edit call_and_fix_autoconf } configure_in() { rm -f configure.in configure.in.new kde_use_qt_param= test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } cat `fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` > configure.in.new echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new if test -f Makefile.am.in; then subdirs=`cat subdirs` for dir in $subdirs; do dir=`echo $dir | sed -e "s,[-+.],_,g"` echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new done fi mfs=`find . -type d -print | fgrep -v "/." | \ sed -e "s#\./##" -e "/^debian/d" | sort` for i in $mfs; do topleveldir=`echo $i| sed -e "s#/.*##"` if test -f $topleveldir/configure.in; then continue fi if test -f $i/Makefile.am; then :; else continue fi if test -s inst-apps; then if grep "\"^$topleveldir\"" inst-apps > /dev/null 2>&1; then continue fi fi if test "$i" = "."; then echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new else echo "AC_CONFIG_FILES([ $i/Makefile ])" >> configure.in.new fi if test -n "$UNSERMAKE"; then if test "$i" = "."; then echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new else echo "AC_CONFIG_FILES([ $i/Makefile.rules ])" >> configure.in.new fi fi done files=`cat configure.files` list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` for file in $list; do echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new done if test -n "$UNSERMAKE"; then echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new fi midfiles=`cat configure.files | fgrep "configure.in.mid"` test -n "$midfiles" && cat $midfiles >> configure.in.new echo "AC_OUTPUT" >> configure.in.new modulename= if test -f configure.in.in; then if head -2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` fi if head -2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` if test -n "$line"; then modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` fi sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ configure.in.new > configure.in && mv configure.in configure.in.new fi fi if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then VERSION="\"3.1.0\"" fi if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then modulename=`pwd`; modulename=`basename $modulename` esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` fi if test -n "$kde_use_qt_param"; then sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ configure.in.new > configure.in && mv configure.in configure.in.new fi sed -e "s#@MODULENAME@#$modulename#" configure.in.new | sed -e "s#@VERSION@#$VERSION#" > configure.in botfiles=`cat configure.files | egrep "configure.in.bot"` test -n "$botfiles" && cat $botfiles >> configure.in cat $admindir/configure.in.bot.end >> configure.in rm -f configure.in.new } configure_files() { admindir=NO for i in . .. ../.. ../../..; do if test -x $i/admin; then admindir=$i/admin; break; fi done rm -f configure.files touch configure.files if test -f configure.in.in && head -2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then echo $admindir/configure.in.min >> configure.files fi test -f configure.in.in && echo configure.in.in >> configure.files list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | sort` for i in $list; do if test -f $i && test `dirname $i` != "." ; then echo $i >> configure.files fi; done test -f configure.in.mid && echo configure.in.mid >> configure.files test -f configure.in.bot && echo configure.in.bot >> configure.files } subdirs() { dirs= compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -1` compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -1` for i in `ls -1`; do if test -f $i/Makefile.am; then case " $compilefirst $compilelast " in *" $i "*) ;; *) dirs="$dirs $i" esac fi done : > ./_SUBDIRS for d in $compilefirst; do echo $d >> ./_SUBDIRS done (for d in $dirs; do list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -1` for s in $list; do echo $s $d done list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -1` for s in $list; do echo $d $s done echo $d $d done ) | tsort >> ./_SUBDIRS for d in $compilelast; do echo $d >> ./_SUBDIRS done if test -f Makefile.am.in; then if test -n "$UNSERMAKE"; then cp Makefile.am.in Makefile.am topsubdirs= for i in $compilefirst $dirs $compilelast; do vari=`echo $i | sed -e "s,[-+],_,g"` echo "if $vari""_SUBDIR_included" >> Makefile.am echo "$vari""_SUBDIR=$i" >> Makefile.am echo "endif" >> Makefile.am topsubdirs="$topsubdirs \$($vari""_SUBDIR)" done echo "SUBDIRS=$topsubdirs" >> Makefile.am else cat Makefile.am.in | \ sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am fi fi if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then rm -f _SUBDIRS fi test -r _SUBDIRS && mv _SUBDIRS subdirs || true } cvs_clean() { if test -d CVS; then :; else echo "You don't have a toplevel CVS directory." echo "You most certainly didn't use cvs to get these sources." echo "But this function depends on cvs's information." exit 1 fi perl $admindir/cvs-clean.pl } package_merge() { catalogs=$POFILES for cat in $catalogs; do msgmerge -o $cat.new $cat $PACKAGE.pot if test -s $cat.new; then grep -v "\"POT-Creation" $cat.new > $cat.new.2 grep -v "\"POT-Creation" $cat >> $cat.new.1 if diff $cat.new.1 $cat.new.2; then rm $cat.new else mv $cat.new $cat fi rm -f $cat.new.1 $cat.new.2 fi done } package_messages() { rm -rf po.backup mkdir po.backup for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i cp po/$i po.backup/backup_$i touch -r po/$i po.backup/backup_$i rm po/$i done podir=${podir:-$PWD/po} files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` dirs=`for i in $files; do echo \`dirname $i\`; done` tmpname="$PWD/messages.log" if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi export EXTRACTRC PREPARETIPS for subdir in $dirs; do test -z "$VERBOSE" || echo "Making messages in $subdir" (cd $subdir if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then $EXTRACTRC *.rc *.ui > rc.cpp else candidates=`ls -1 *.rc *.ui 2>/dev/null` if test -n "$candidates"; then echo "$subdir has *.rc or *.ui files, but not correct messages line" fi fi if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp else echo " " > _translatorinfo.cpp fi perl -e '$mes=0; while () { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \ XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-$KDEDIR/include}/kde.pot" \ messages ) 2>&1 | grep -v '^make\[1\]' > $tmpname test -s $tmpname && { echo $subdir ; cat "$tmpname"; } test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp rm -f $subdir/_translatorinfo.cpp rm -f $subdir/_transMakefile done rm -f $tmpname for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do test -f po/$i || echo "disappeared: $i" done for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do msgmerge -q -o po/$i po/$i po/$i egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then echo "will update $i" msgmerge -q po.backup/backup_$i po/$i > temp.pot mv temp.pot po/$i else if test -f po.backup/backup_$i; then test -z "$VERBOSE" || echo "I'm restoring $i" mv po.backup/backup_$i po/$i rm po.backup/$i else echo "will add $i" fi fi done rm -f temp.pot rm -rf po.backup } admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` test "x$admindir" = "x$0" && admindir=. test "x$MAKE" = x && MAKE=make makefile_am=Makefile.am makefile_wo=Makefile.am if test -f Makefile.am.in; then makefile_am=Makefile.am.in makefile_wo=Makefile.am.in.wo fi # Suck in the AUTOCONF detection code . $admindir/detect-autoconf.sh ### ### Main ### arg=`echo $1 | tr '\-.' __` case $arg in cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ cvs_clean | package_merge | package_messages ) $arg ;; * ) echo "Usage: cvs.sh " echo "Target can be one of:" echo " cvs cvs-clean dist" echo " configure.in configure.files" echo " package-merge package-messages" echo "" echo "Usage: anything but $1" exit 1 ;; esac if test -f Makefile.am.in.wo; then rm Makefile.am.in.wo fi exit 0 kdocumenteditor-1.0/admin/debianrules0100755000076400007640000001125007735744575020051 0ustar tasukuhomeuser#!/usr/bin/perl -w use Shell qw(mv cp mkdir rm) ; use File::Find; use Cwd; $origPwd = `pwd`; chomp $origPwd; $kde_confdir = "/etc/kde3"; $kde_prefix = "/usr"; $kde_bindir = "$kde_prefix/bin"; $kde_includedir = "$kde_prefix/include/kde"; $kde_libdir = "$kde_prefix/lib"; $kde_cgidir = "$kde_prefix/lib/cgi-bin"; $kde_moduledir = "$kde_prefix/lib/kde3"; $kde_appsdir = "$kde_prefix/share/applnk"; $kde_datadir = "$kde_prefix/share/apps"; $kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; $kde_icondir = "$kde_prefix/share/icons"; $kde_locale = "$kde_prefix/share/locale"; $kde_mimedir = "$kde_prefix/share/mimelnk"; $kde_servicesdir = "$kde_prefix/share/services"; $kde_servicetypesdir = "$kde_prefix/share/servicetypes"; $kde_sounddir = "$kde_prefix/share/sounds"; $kde_templatesdir = "$kde_prefix/share/templates"; $kde_wallpaperdir = "$kde_prefix/share/wallpapers"; $mandir = "$kde_prefix/share/man"; $infodir = "$kde_prefix/share/info"; $sysconfdir = "/etc"; $QTDIR = "/usr/share/qt"; $IDL = "$kde_bindir/cuteidl"; $DCOPIDL = "$kde_bindir/dcopidl"; $DCOPIDL2CPP = "$kde_bindir/dcopidl2cpp"; $KDB2HTML = "$kde_bindir/kdb2html"; $MCOPIDL = "$kde_bindir/mcopidl"; $ARTSCCONFIG = "$kde_bindir/artsc-config"; if (defined $ENV{DEB_BUILD_OPTIONS} && $ENV{DEB_BUILD_OPTIONS} =~ /\bdebug\b/) { $enable_debug="--enable-debug"; $enable_final=""; } else { $enable_debug="--disable-debug"; $enable_final="--enable-final"; } if (@ARGV && $ARGV[0] eq 'echodirs') { print STDOUT "export kde_confdir=$kde_confdir\n"; print STDOUT "export kde_prefix=$kde_prefix\n"; print STDOUT "export kde_bindir=$kde_bindir\n"; print STDOUT "export kde_includedir=$kde_includedir\n"; print STDOUT "export kde_libdir=$kde_libdir\n"; print STDOUT "export kde_cgidir=$kde_cgidir\n"; print STDOUT "export kde_moduledir=$kde_moduledir\n"; print STDOUT "export kde_appsdir=$kde_appsdir\n"; print STDOUT "export kde_datadir=$kde_datadir\n"; print STDOUT "export kde_htmldir=$kde_htmldir\n"; print STDOUT "export kde_icondir=$kde_icondir\n"; print STDOUT "export kde_locale=$kde_locale\n"; print STDOUT "export kde_mimedir=$kde_mimedir\n"; print STDOUT "export kde_servicesdir=$kde_servicesdir\n"; print STDOUT "export kde_servicetypesdir=$kde_servicetypesdir\n"; print STDOUT "export kde_sounddir=$kde_sounddir\n"; print STDOUT "export kde_templatesdir=$kde_templatesdir\n"; print STDOUT "export kde_wallpaperdir=$kde_wallpaperdir\n"; print STDOUT "export mandir=$mandir\n"; print STDOUT "export infodir=$infodir\n"; print STDOUT "export sysconfdir=$sysconfdir\n"; print STDOUT "export QTDIR=$QTDIR\n"; print STDOUT "export IDL=$IDL\n"; print STDOUT "export DCOPIDL=$DCOPIDL\n"; print STDOUT "export DCOPIDL2CPP=$DCOPIDL2CPP\n"; print STDOUT "export KDB2HTML=$KDB2HTML\n"; print STDOUT "export MCOPIDL=$MCOPIDL\n"; print STDOUT "export ARTSCCONFIG=$ARTSCCONFIG\n"; print STDOUT "export INSTALL_DATA=install -p -c -m 644\n"; print STDOUT "configkde=$enable_debug $enable_final --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --sysconfdir=\$(sysconfdir) --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n"; print STDOUT "configkdevelop=$enable_debug $enable_final --disable-rpath --enable-docbase --enable-kdoc2 --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --with-kdelibsdoc-dir=/usr/share/doc/kdelibs3-doc/html\n"; print STDOUT "configkdepim=$enable_debug $enable_final --disable-rpath --with-extra-includes=/usr/include/libpisock --enable-shared --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt --mandir=\$(mandir) --infodir=\$(infodir)\n"; exit } if (@ARGV && $ARGV[0] eq 'echoglobals') { print STDOUT "[Directories]\n"; print STDOUT "dir_config=$kde_confdir\n"; print STDOUT "dir_tmp=/tmp\n"; print STDOUT "dir_socket=/tmp\n"; print STDOUT "dir_exe=$kde_bindir\n"; print STDOUT "dir_lib=$kde_libdir\n"; print STDOUT "dir_cgi=$kde_cgidir\n"; print STDOUT "dir_module=$kde_moduledir\n"; print STDOUT "dir_apps=$kde_appsdir\n"; print STDOUT "dir_data=$kde_datadir\n"; print STDOUT "dir_html=$kde_htmldir\n"; print STDOUT "dir_icon=$kde_icondir\n"; print STDOUT "dir_locale=$kde_locale\n"; print STDOUT "dir_mime=$kde_mimedir\n"; print STDOUT "dir_services=$kde_servicesdir\n"; print STDOUT "dir_servicetypes=$kde_servicetypesdir\n"; print STDOUT "dir_sound=$kde_sounddir\n"; print STDOUT "dir_templates=$kde_templatesdir\n"; print STDOUT "dir_wallpaper=$kde_wallpaperdir\n"; print STDOUT "[General]\n"; print STDOUT "TerminalApplication=x-terminal-emulator\n"; exit } kdocumenteditor-1.0/admin/detect-autoconf.sh0100644000076400007640000000426107735744575021252 0ustar tasukuhomeuser#! /bin/sh # Global variables... AUTOCONF="autoconf" AUTOHEADER="autoheader" AUTOM4TE="autom4te" AUTOMAKE="automake" ACLOCAL="aclocal" # We don't use variable here for remembering the type ... strings. # local variables are not that portable, but we fear namespace issues with # our includer. The repeated type calls are not that expensive. checkAutoconf() { if test -x "`$WHICH autoconf-2.5x`" ; then AUTOCONF="`$WHICH autoconf-2.5x`" elif test -x "`$WHICH autoconf-2.54`" ; then AUTOCONF="`$WHICH autoconf-2.54`" elif test -x "`$WHICH autoconf-2.53`" ; then AUTOCONF="`$WHICH autoconf-2.53`" elif test -x "`$WHICH autoconf-2.53a`" ; then AUTOCONF="`$WHICH autoconf-2.53a`" elif test -x "`$WHICH autoconf-2.52`" ; then AUTOCONF="`$WHICH autoconf-2.52`" elif test -x "`$WHICH autoconf2.50`" ; then AUTOCONF="`$WHICH autoconf2.50`" fi } checkAutoheader() { if test -x "`$WHICH autoheader-2.5x`" ; then AUTOHEADER="`$WHICH autoheader-2.5x`" AUTOM4TE="`$WHICH autom4te-2.5x`" elif test -x "`$WHICH autoheader-2.54`" ; then AUTOHEADER="`$WHICH autoheader-2.54`" AUTOM4TE="`$WHICH autom4te-2.54`" elif test -x "`$WHICH autoheader-2.53`" ; then AUTOHEADER="`$WHICH autoheader-2.53`" AUTOM4TE="`$WHICH autom4te-2.53`" elif test -x "`$WHICH autoheader-2.53a`" ; then AUTOHEADER="`$WHICH autoheader-2.53a`" AUTOM4TE="`$WHICH autom4te-2.53a`" elif test -x "`$WHICH autoheader-2.52`" ; then AUTOHEADER="`$WHICH autoheader-2.52`" elif test -x "`$WHICH autoheader2.50`" ; then AUTOHEADER="`$WHICH autoheader2.50`" fi } checkAutomakeAclocal () { if test -z "$UNSERMAKE"; then if test -x "`$WHICH automake-1.6`" ; then AUTOMAKE="`$WHICH automake-1.6`" ACLOCAL="`$WHICH aclocal-1.6`" elif test -x "`$WHICH automake-1.7`" ; then AUTOMAKE="`$WHICH automake-1.7`" ACLOCAL="`$WHICH aclocal-1.7`" fi else AUTOMAKE="$UNSERMAKE" fi } checkWhich () { WHICH="" for i in "type -p" "which" "type" ; do T=`$i sh 2> /dev/null` test -x "$T" && WHICH="$i" && break done } checkWhich checkAutoconf checkAutoheader checkAutomakeAclocal export WHICH AUTOHEADER AUTOCONF AUTOM4TE AUTOMAKE ACLOCAL kdocumenteditor-1.0/admin/new-ltmain.sh0120777000076400007640000000000007742332216022610 2old-ltmain.shustar tasukuhomeuserkdocumenteditor-1.0/admin/nmcheck0100755000076400007640000002136107735744575017170 0ustar tasukuhomeuser#!/usr/bin/perl -w # Check namespace cleanness of a library. # Allowed symbols are passed as arguments. # They may have trailing * = wildcard. # Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes) # Symbols are listed as full function unmangled names without arguments, # e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar() # and all symbols in namespace/class nspace. # If an argument has comma in it, it's a filename of a file containing # allowed symbols, one per line. $thisProg = "$0"; # This programs name $library = ""; $allowed_symbols = ""; $debug = 0; $allowed_weak = ""; $weak_specified = 0; while( defined( $ARGV[ 0 ] )) { $_ = shift; if( /^--verbose$|^-v$/ ) { $debug = 1; } elsif( /^--help$|^-h$/ ) { print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n", "\n", "Check if the given library has only allowed public symbols.\n", "\n", " --allowweak=[symbol] allow only these weak symbols\n", " -v, --verbose verbosely list files processed\n", " -h, --help print this help, then exit\n"; exit 0; } elsif( /^--allowweak=(.*)$/ ) { $allowed_weak .= " " . $1; $weak_specified = 1; } elsif( /^--allowweak$/ ) # simply list all weak { $allowed_weak .= " "; $weak_specified = 1; } elsif( /^--*/ ) { die "Invalid argument!\n"; } else { if( ! $library ) { $library = $_; } else { $allowed_symbols .= " " . $_; } } } if( ! $weak_specified ) { $allowed_weak = "*"; # allow all weak symbols by default # instances of templates and similar stuff - unfortunately includes also things from other libraries, # so it cannot be on by default } print STDERR "library:" . $library . "\n" if $debug; print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug; print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug; $default_symbols = "_fini _init"; # system symbols # on my system, every .so has : # A _DYNAMIC # A _GLOBAL_OFFSET_TABLE_ # A __bss_start # A _edata # A _end # T _fini # T _init # no need to list A symbols in $default_symbols print STDERR "default_symbols: " . $default_symbols . "\n" if $debug; print STDOUT "Namespace cleanness check for " . $library . " :\n"; $lib_file = ""; if( $library =~ /\.la$/ ) { # get the real library file from .la open( FILEIN, $library ) || die "Couldn't open $! !\n"; while( $line = ) { if( $line =~ /library_names=\'([^ ]*).*/o ) { $lib_file = $1; } } close( FILEIN ); if( ! $lib_file ) { print STDERR "Library file not found in .la file!\n"; exit 1; } my $libpath = $library; $libpath =~ s%[^/]*$%%; if( -e $libpath . ".libs/" . $lib_file ) { $lib_file = $libpath . ".libs/" . $lib_file; } else { $lib_file = $libpath . $lib_file; } } else { $lib_file = $library; } print STDERR "libfile: ". $lib_file . "\n" if $debug; $allowed_symbols .= " " . $default_symbols; sub process_symbols($\@\%\@); @wildcards = (); %exacts = (); @regwildcards = (); process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards ); @weak_wildcards = (); %weak_exacts = (); @weak_regwildcards = (); process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards ); # grep is for stripping not exported symbols, which don't have address (=first column) $nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |"; # TODO how portable is this nmcheck stuff? print STDERR "nm command:" . $nm_command . "\n" if $debug; open( FILEIN, $nm_command ) || die "nm command failed\n"; my $exit_code = 0; while( $line = ) { my $type; my $symbol; if( $line =~ /^[^ ]* (.) (.*)$/o ) { $type = $1; $symbol = $2; } else { die "Invalid line: " . $line . "\n"; } print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug; if( $type eq "A" ) { # these should be system symbols, so ignore them next; } my $orig_symbol = $symbol; if( $symbol =~ /\(anonymous namespace\)/o ) { # TODO tell to prefer named namespaces? (shorter symbols) next; } # strip prefixes # the :: appending is to make "CLASS::*" work also for "vtable for CLASS" $symbol =~ s/^typeinfo for (.*)$/$1::/o; $symbol =~ s/^typeinfo fn for (.*)$/$1::/o; $symbol =~ s/^typeinfo name for (.*)$/$1::/o; $symbol =~ s/^vtable for (.*)$/$1::/o; $symbol =~ s/^guard variable for (.*)$/$1::/o; $symbol =~ s/^reference temporary for (.*)$/$1::/o; $symbol =~ s/^VTT for (.*)$/$1::/o; $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o; $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o; $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o; $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o; $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o; # templates seem to have also return types mangled in their name, and nm prints it too # they have also template arguments in the symbol # get rid of both of those while( $symbol =~ /<.*>/o ) { $symbol =~ s/<[^<>]*>//o; # strip innermost <> } if( $symbol !~ /operator\(\)/o ) { $symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it } else { $symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it } $symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc. if( $symbol =~ /(^|:| )operator /o ) { $symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah' } else { $symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type) } # print STDERR "Processed symbol: " . $symbol . "\n" if $debug; my $found = 0; if( $exacts{ $symbol } ) { $found = 1; } if( ! $found ) { for my $wild ( @wildcards ) { if( index( $symbol, $wild ) == 0 ) { $found = 1; last; } } } if( ! $found ) { for my $wild ( @regwildcards ) { if( $symbol =~ /^$wild$/ ) { $found = 1; last; } } } if( ( ! $found ) && ( $type eq "W" || $type eq "V" )) { if( $weak_exacts{ $symbol } ) { $found = 1; } if( ! $found ) { for my $wild ( @weak_wildcards ) { if( index( $symbol, $wild ) == 0 ) { $found = 1; last; } } } if( ! $found ) { for my $wild ( @weak_regwildcards ) { if( $symbol =~ /^$wild$/ ) { $found = 1; last; } } } } if( ! $found ) { print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n"; $exit_code = 1; } } close( FILEIN ); print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n"; exit $exit_code; sub process_symbols($\@\%\@) { my $allowed_symbols = $_[ 0 ]; my $wildcards_ref = $_[ 1 ]; my $exacts_ref = $_[ 2 ]; my $regwildcards_ref = $_[ 3 ]; $allowed_symbols =~ s/^ *//o; # strip whitespace $allowed_symbols =~ s/ *$//o; if( $allowed_symbols eq "NONE" ) { $allowed_symbols = ""; } my @symbols1 = split( ' ', $allowed_symbols ); my $i = 0; my @symbols2 = (); while( defined( $symbols1[ $i ] )) { my $symbol = $symbols1[ $i ]; if( $symbol =~ /\./ ) # dot in name -> file { open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" ); while( $line = ) { $line =~ s/^\s*//o; # strip whitespace $line =~ s/\s*$//o; if( $line !~ /^$/o # empty line && $line !~ /^\s*#/ ) # comment line starting with # { $symbols2[ $#symbols2 + 1 ] = $line; } } close( SYMIN ); } else { $symbols2[ $#symbols2 + 1 ] = $symbol; } $i++; } $i = 0; while( defined( $symbols2[ $i ] )) { my $symbol = $symbols2[ $i ]; if( $symbol =~ /__/ || $symbol =~ /^_[A-Z]/ ) { # ISO C++ 2.10.2 die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n"; } elsif( $symbol eq "main" || $symbol eq "main*" ) { die "Symbol main is not allowed!\n"; } if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it && $symbol !~ /operator\*$/o ) { print STDERR "wildcard:" . $symbol . "\n" if $debug; $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1; } elsif( $symbol =~ /\*$/o && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o ) && $symbol !~ /^\*/o && $symbol !~ /operator\*$/o ) { print STDERR "regwildcard:" . $symbol . "\n" if $debug; $symbol =~ s/\*/\.\*/go; # change * to .* (regexp) $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol; } else { print STDERR "exact:" . $symbol . "\n" if $debug; $exacts_ref->{ $symbol } = 1; } $i++; } } kdocumenteditor-1.0/admin/ltconfig0120777000076400007640000000000007742332225021641 2old-ltconfigustar tasukuhomeuserkdocumenteditor-1.0/admin/old-libtool.m4.in0100644000076400007640000007217407735744575020731 0ustar tasukuhomeuser## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- ## Copyright 1996, 1997, 1998, 1999, 2000, 2001 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. # serial 46 AC_PROG_LIBTOOL AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])])])])])]) AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_SAVE AC_LANG_C AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_LIBTOOL_PICMODE - implement the --with-pic flag # Usage: AC_LIBTOOL_PICMODE[(MODE)] # Where MODE is either `yes' or `no'. If omitted, it defaults to # `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default)]) # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ]) # AC_PATH_MAGIC - find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) else MAGIC_CMD=: fi fi ]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] re_direlt=['/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ]) # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" ]) # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognise dependant libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'] else [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'] fi lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; openbsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case "$host_cpu" in i*86 ) changequote(,)dnl lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' changequote([, ])dnl lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; newsos6) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the # configure arguments. Note that LIBLTDL and INCLTDL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed # with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_LIBTOOL_CXX - enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])]) AC_DEFUN([_AC_LIBTOOL_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AC_LIBTOOL_GCJ - enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])]) AC_DEFUN([_AC_LIBTOOL_GCJ], [AC_REQUIRE([AC_PROG_LIBTOOL]) AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) dnl old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) kdocumenteditor-1.0/admin/old-ltcf-c.sh0100644000076400007640000007573107735744575020124 0ustar tasukuhomeuser#### This script is meant to be sourced by ltconfig. # ltcf-c.sh - Create a C compiler specific configuration # # Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='main(){return(0);}' ## Linker Characteristics case $host_os in cygwin* | mingw*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$with_gcc" != yes; then with_gnu_ld=no fi ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \[$]# in 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; darwin* | rhapsody*) allow_undefined_flag='-undefined suppress' archive_cmds='$CC `test .$module = .yes && echo -bundle || echo -dynamiclib` $allow_undefined_flag -o $lib $libobjs $deplibs $linkopts -install_name $rpath/$soname `test -n "$verstring" -a x$verstring != x0.0 && echo $verstring`' # We need to add '_' to the symbols in $export_symbols first #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='-all_load $convenience' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac case "$host_os" in freebsd*) skip_need_lc_check=yes ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$with_gcc" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) hardcode_direct=yes hardcode_libdir_separator=':' link_all_deplibs=yes # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. if test "$with_gcc" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # KDE requires run time linking. Make it the default. aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # Let the compiler handle the export list. always_export_symbols=no if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other run time loading flags (-brtl), -berok will # link without error, but may produce a broken library. allow_undefined_flag=' ${wl}-berok' # The following three lines along with hardcode_into_libs=yes put the correct path into libraries. hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib' archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib' archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib' else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' -o $lib' archive_expsym_cmds='$CC '"$shared_flag"' $libobjs $deplibs $compiler_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib' else allow_undefined_flag=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) always_export_symbols=yes # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec=' ' build_libtool_need_lc=yes hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' # This is similar to how AIX traditionally builds it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no skip_need_lc_check=yes ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$with_gcc" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$with_gcc" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$with_gcc" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' fi hardcode_libdir_flag_spec='-rpath $libdir' hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ;; solaris*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; unixware7*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi ## Compiler Characteristics: PIC flags, static flags, etc if test "X${ac_cv_prog_cc_pic+set}" = Xset; then : else ac_cv_prog_cc_pic= ac_cv_prog_cc_shlib= ac_cv_prog_cc_wl= ac_cv_prog_cc_static= ac_cv_prog_cc_no_builtin= ac_cv_prog_cc_can_build_shared=$can_build_shared if test "$with_gcc" = yes; then ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; cygwin* | mingw* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ac_cv_prog_cc_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all ac_cv_prog_cc_pic= ;; sysv4*MP*) if test -d /usr/nec; then ac_cv_prog_cc_pic=-Kconform_pic fi ;; *) ac_cv_prog_cc_pic='-fPIC' ;; esac else # PORTME Check for PIC flags for the system compiler. case $host_os in aix*) # All AIX code is PIC. ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC" ;; hpux9* | hpux10* | hpux11*) # Is there a better ac_cv_prog_cc_static that works with the bundled CC? ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ac_cv_prog_cc_pic='+Z' ;; irix5* | irix6*) ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-non_shared' # PIC (with -KPIC) is the default. ;; cygwin* | mingw* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ac_cv_prog_cc_pic='-DDLL_EXPORT' ;; linux*) case "$CC" in ccc*) # Compaq C # It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. ac_cv_prog_cc_static='-non_shared' ;; KCC*) # KAI C++ ac_cv_prog_cc_pic='-fPIC' ac_cv_prog_cc_wl='--backend -Wl,' ac_cv_prog_cc_static='-Bstatic' ;; *) ;; esac ;; newsos6) ac_cv_prog_cc_pic='-KPIC' ac_cv_prog_cc_static='-Bstatic' ;; osf3* | osf4* | osf5*) # All OSF/1 code is PIC. ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-non_shared' ;; sco3.2v5*) ac_cv_prog_cc_pic='-Kpic' ac_cv_prog_cc_static='-dn' ac_cv_prog_cc_shlib='-belf' ;; solaris*) ac_cv_prog_cc_pic='-KPIC' ac_cv_prog_cc_static='-Bstatic' ac_cv_prog_cc_wl='-Wl,' ;; sunos4*) ac_cv_prog_cc_pic='-PIC' ac_cv_prog_cc_static='-Bstatic' ac_cv_prog_cc_wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ac_cv_prog_cc_pic='-KPIC' ac_cv_prog_cc_static='-Bstatic' ac_cv_prog_cc_wl='-Wl,' ;; uts4*) ac_cv_prog_cc_pic='-pic' ac_cv_prog_cc_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then ac_cv_prog_cc_pic='-Kconform_pic' ac_cv_prog_cc_static='-Bstatic' fi ;; *) ac_cv_prog_cc_can_build_shared=no ;; esac fi case "$host_os" in # Platforms which do not suport PIC and -DPIC is meaningless # on them: *djgpp*) ac_cv_prog_cc_pic= ;; *) ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC" ;; esac fi need_lc=yes if test "$enable_shared" = yes && test "$with_gcc" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. echo $ac_n "checking whether -lc should be explicitly linked in... $ac_c" 1>&6 if eval "test \"`echo '$''{'ac_cv_archive_cmds_needs_lc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 need_lc=$ac_cv_archive_cmds_needs_lc elif test "x$skip_need_lc_check" = "xyes" ; then echo $ac_n "(skipping, using no) $ac_c" 1>&6 need_lc=no else $rm conftest* echo "static int dummy;" > conftest.$ac_ext if { (eval echo ltcf-c.sh:need_lc: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then # Append any warnings to the config.log. cat conftest.err 1>&5 soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$ac_cv_prog_cc_wl compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo ltcf-c.sh:need_lc: \"$archive_cmds\") 1>&5; (eval $archive_cmds) 2>&1 | grep " -lc " 1>&5 ; }; then need_lc=no fi allow_undefined_flag=$save_allow_undefined_flag else cat conftest.err 1>&5 fi fi $rm conftest* echo "$ac_t$need_lc" 1>&6 ;; esac fi ac_cv_archive_cmds_needs_lc=$need_lc kdocumenteditor-1.0/admin/old-ltcf-cxx.sh0100644000076400007640000011201607735744575020470 0ustar tasukuhomeuser#### This script is meant to be sourced by ltconfig. # ltcf-cxx.sh - Create a C++ compiler specific configuration # # Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # Original C++ support by:Gary V. Vaughan # Alexandre Oliva # Ossama Othman # Thomas Thanner # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Source file extension for C++ test sources. ac_ext=cc # Object file extension for compiled C++ test sources. objext=o # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[]) { return (0); }' # C++ compiler CXX=${CXX-c++} # ltmain only uses $CC for tagged configurations so make sure $CC is set. CC=${CC-"$CXX"} CFLAGS=${CFLAGS-"$CXXFLAGS"} # Allow CC (or CXX) to be a program name with arguments. set dummy $CC compiler=$2 cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` # we are optimistic. (Too optimistic if you ask me, down there we switch it # off again for most platforms ;) (MM) ld_shlibs=yes # Check if we are using GNU gcc (taken/adapted from configure script) # We need to check here since "--with-gcc" is set at configure time, # not ltconfig time! cat > conftest.$ac_ext <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then with_gcc=yes # Set up default GNU C++ configuration # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ egrep 'GNU ld' > /dev/null; then with_gnu_ld=yes archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else with_gcc=no with_gnu_ld=no wlarc= fi echo "ltcf-cxx: with_gcc=$with_gcc ; with_gnu_ld=$with_gnu_ld" # PORTME: fill in a description of your system's C++ link characteristics case $host_os in aix3*) # FIXME: insert proper C++ library support ld_shlibs=no ;; aix4* | aix5*) archive_cmds='' hardcode_direct=yes hardcode_libdir_separator=':' link_all_deplibs=yes # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. if test "$with_gcc" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else shared_flag='-qmkshrobj' fi fi if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # KDE requires run time linking. Make it the default. aix_use_runtimelinking=yes exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # Let the compiler handle the export list. always_export_symbols=no if test "$aix_use_runtimelinking" = yes; then allow_undefined_flag=' ${wl}-berok' # The following three lines along with hardcode_into_libs=yes put the correct path into libraries. hardcode_libdir_flag_spec='${wl}-blibpath:$libdir${libdir:+:}/usr/lib:/lib' archive_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' -o $lib' archive_expsym_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-G '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib' else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir${libdir:+:}/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags '"$hardcode_libdir_flag_spec"' -o $lib' archive_expsym_cmds='$CC '"$shared_flag"' $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags '"$hardcode_libdir_flag_spec"' ${wl}'"$exp_sym_flag"':$export_symbols -o $lib' else hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' # Warning - without using the other run time loading flags, -berok will # link without error, but may produce a broken library. no_undefined_flag='${wl}-bnoerok' allow_undefined_flag='${wl}-berok" # -bexpall does not export symbols beginning with underscore (_) always_export_symbols=yes # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec=' ' build_libtool_need_lc=yes # This is similar to how AIX traditionally builds it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; dgux*) case $cc_basename in ec++) # FIXME: insert proper C++ library support ld_shlibs=no ;; ghcx) # Green Hills C++ Compiler # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; freebsd*) # FreeBSD uses GNU C++ and GNU ld skip_need_lc_check=yes remove_lgcc=yes ;; hpux*) hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' case $cc_basename in CC) # FIXME: insert proper C++ library support ld_shlibs=no ;; aCC) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$with_gcc" = yes && test "$with_gnu_ld" = no ; then # MM: for HP-UX and g++ -fPIC is needed to link pic objects together case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac output_verbose_link_cmds='$CC -shared -fPIC $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' remove_lgcc=yes fi if test "$with_gcc" = no ; then # FIXME: insert proper C++ library support ld_shlibs=no fi ;; esac ;; irix5* | irix6*) case $cc_basename in CC) # SGI C++ archive_cmds='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$with_gcc" = yes; then if test "$with_gnu_ld" = no; then archive_cmds='$CC -D_LANGUAGE_C_CPLUS_PLUS -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' fi fi ;; esac hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; linux*) case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $libobjs $deplibs $compiler_flags --soname $soname -o \$templib; test \$templib = $lib || mv \$templib $lib' archive_expsym_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $libobjs $deplibs $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; test \$templib = $lib || mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='echo "go to hell"' skip_need_lc_check=yes hardcode_libdir_flag_spec='${wl}--rpath,$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. # We add also $compiler_flags, to evetually add any --thread_safe or # --exceptions flags (which is also tested when building an .a # archive. old_archive_cmds='$CC -Bstatic $compiler_flags -o $oldlib $oldobjs' ;; cxx) # Compaq C++ archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='-rpath $libdir' hardcode_libdir_separator=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; insure) if test "$with_gcc" = yes; then # Insure++ together with gcc probably means also GNU ld # only -whole-archive isn't supported whole_archive_flag_spec="" # and we can't use -nostdlib, because bloody insure has no way to # output the linkline (-Zvm isn't working as documented), so we don't # know the depending libs. So we hope, insure gets it right anyway. archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' output_verbose_link_cmds="" fi esac ;; lynxos*) # FIXME: insert proper C++ library support ld_shlibs=no ;; m88k*) # FIXME: insert proper C++ library support ld_shlibs=no ;; mvs*) case $cc_basename in cxx) # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; netbsd*) if test "$with_gcc" = no || test "$with_gnu_ld" = no; then # This should only be triggered for NetBSD/a.out # Add in C++ constructor/destructor support if test -f /usr/pkg/lib/c++rt0/c++rt0.o.PIC; then cppopts="/usr/pkg/lib/c++rt0/c++rt0.o.PIC" elif test -f /usr/lib/c++rt0.o; then cppopts="/usr/lib/c++rt0.o" fi archive_cmds='ld -Bshareable -o $lib '"$cppopts"' $libobjs $deplibs $linkopts' fi ;; openbsd*) if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then # MM: OpenBSD 2.7 uses G++, but not GNU ld archive_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' archive_expsym_cmds='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' old_archive_cmds="$old_archive_cmds~"'$RANLIB $oldlib' hardcode_libdir_flag_spec='${wl}-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='${wl}-Bforcearchive' remove_lgcc=yes fi ;; osf3*) if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' hardcode_libdir_separator=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. old_archive_cmds='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs=no ;; cxx) allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac fi ;; osf4* | osf5*) if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*' no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*' archive_cmds='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmds='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' else case $cc_basename in KCC) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. archive_cmds='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' hardcode_libdir_separator=: # Archives containing C++ object files must be created using # the KAI C++ compiler. old_archive_cmds='$CC -o $oldlib $oldobjs' ;; RCC) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support ld_shlibs=no ;; cxx) allow_undefined_flag=' -Wl,-expect_unresolved -Wl,\*' no_undefined_flag=' -Wl,-expect_unresolved -Wl,\*' archive_cmds='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -update_registry ${objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='-rpath $libdir' hardcode_libdir_separator=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac fi ;; psos*) # FIXME: insert proper C++ library support ld_shlibs=no ;; sco*) case $cc_basename in CC) # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; sunos4*) case $cc_basename in CC) # Sun C++ 4.x # FIXME: insert proper C++ library support ld_shlibs=no ;; lcc) # Lucid # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; solaris*) case $cc_basename in CC) # Sun C++ 4.2, 5.x and Centerline C++ no_undefined_flag=' -ztext' archive_cmds='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # The C++ compiler is used as linker so we must use $wl # flag to pass the commands to the underlying system # linker. # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac link_all_deplibs=yes # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmds='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. old_archive_cmds='$CC -xar -o $oldlib $oldobjs' ;; gcx) # Green Hills C++ Compiler archive_cmds='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. old_archive_cmds='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$with_gcc" = yes && test "$with_gnu_ld" = no; then if $CC --version | egrep -v '^2\.7' > /dev/null; then archive_cmds='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmds="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. archive_cmds='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmds="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" fi hardcode_libdir_flag_spec='${wl}-R $wl$libdir' fi ;; esac ;; tandem*) case $cc_basename in NCC) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ;; unixware*) # FIXME: insert proper C++ library support ld_shlibs=no ;; vxworks*) # FIXME: insert proper C++ library support ld_shlibs=no ;; *) # FIXME: insert proper C++ library support ld_shlibs=no ;; esac ## Compiler Characteristics: PIC flags, static flags, etc # We don't use cached values here since only the C compiler # characteristics should be cached. ac_cv_prog_cc_pic= ac_cv_prog_cc_shlib= ac_cv_prog_cc_wl= ac_cv_prog_cc_static= ac_cv_prog_cc_no_builtin= ac_cv_prog_cc_can_build_shared=$can_build_shared ac_cv_prog_cc_pic_works= ac_cv_prog_cc_static_works= if test "$with_gcc" = yes; then ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; cygwin* | mingw* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ac_cv_prog_cc_pic='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all ac_cv_prog_cc_pic= ;; sysv4*MP*) if test -d /usr/nec; then ac_cv_prog_cc_pic=-Kconform_pic fi ;; *) ac_cv_prog_cc_pic='-fPIC' ;; esac else case $host_os in aix4* | aix5*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68) # Green Hills C++ Compiler # ac_cv_prog_cc_static="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; dgux*) case $cc_basename in ec++) ac_cv_prog_cc_pic='-KPIC' ;; ghcx) # Green Hills C++ Compiler ac_cv_prog_cc_pic='-pic' ;; *) ;; esac ;; freebsd*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC) ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ac_cv_prog_cc_pic='+Z' ;; aCC) ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ac_cv_prog_cc_pic='+Z' ;; *) ;; esac ;; irix5* | irix6*) case $cc_basename in CC) ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-non_shared' ac_cv_prog_cc_pic='-KPIC' ;; *) ;; esac ;; linux*) case $cc_basename in KCC) # KAI C++ Compiler ac_cv_prog_cc_wl='--backend -Wl,' ac_cv_prog_cc_pic='-fPIC' ac_cv_prog_cc_static='-Bstatic' ;; cxx) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. ac_cv_prog_cc_pic= ac_cv_prog_cc_static='-non_shared' ;; *) ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx) ac_cv_prog_cc_pic='-W c,exportall' ;; *) ;; esac ;; netbsd*) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC) ac_cv_prog_cc_wl='--backend -Wl,' ;; RCC) # Rational C++ 2.4.1 ac_cv_prog_cc_pic='-pic' ;; cxx) # Digital/Compaq C++ ac_cv_prog_cc_wl='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. ac_cv_prog_cc_pic= ac_cv_prog_cc_static='-non_shared' ;; *) ;; esac ;; psos*) ;; sco*) case $cc_basename in CC) ac_cv_prog_cc_pic='-fPIC' ;; *) ;; esac ;; solaris*) case $cc_basename in CC) # Sun C++ 4.2, 5.x and Centerline C++ ac_cv_prog_cc_pic='-KPIC' ac_cv_prog_cc_static='-Bstatic' ac_cv_prog_cc_wl='-Qoption ld ' ;; gcx) # Green Hills C++ Compiler ac_cv_prog_cc_pic='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC) # Sun C++ 4.x ac_cv_prog_cc_pic='-pic' ac_cv_prog_cc_static='-Bstatic' ;; lcc) # Lucid ac_cv_prog_cc_pic='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC) # NonStop-UX NCC 3.20 ac_cv_prog_cc_pic='-KPIC' ;; *) ;; esac ;; unixware*) ;; vxworks*) ;; *) ac_cv_prog_cc_can_build_shared=no ;; esac fi case "$host_os" in # Platforms which do not suport PIC and -DPIC is meaningless # on them: *djgpp*) ac_cv_prog_cc_pic= ;; *) ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC" ;; esac # Figure out "hidden" C++ library dependencies from verbose # compiler output whening linking a shared library. cat > conftest.$ac_ext <&5; then # Parse the compiler output and extract the necessary # objects, libraries and library flags. # Sentinel used to keep track of whether or not we are before # the conftest object file. pre_test_object_deps_done=no for p in `eval $output_verbose_link_cmds`; do case $p in -L* | -R* | -l*) # Some compilers place space between "-{L,R}" and the path. # Remove the space. if test $p = "-L" \ || test $p = "-R"; then prev=$p continue else prev= fi if test "$pre_test_object_deps_done" = no; then case $p in -L* | -R*) # Internal compiler library paths should come after those # provided the user. The postdeps already come after the # user supplied libs so there is no need to process them. if test -z "$compiler_lib_search_path"; then compiler_lib_search_path="${prev}${p}" else compiler_lib_search_path="${compiler_lib_search_path} ${prev}${p}" fi ;; # The "-l" case would never come before the object being # linked, so don't bother handling this case. esac else add="${prev}${p}" if test "x$remove_lgcc" = "xyes" ; then case "$add" in -lgcc ) add="" ;; esac fi if test -n "$add" ; then if test -z "$postdeps"; then postdeps="$add" else postdeps="${postdeps} ${add}" fi fi fi ;; *.$objext) # This assumes that the test object file only shows up # once in the compiler output. if test "$p" = "conftest.$objext"; then pre_test_object_deps_done=yes continue fi if test "$pre_test_object_deps_done" = no; then if test -z "$predep_objects"; then predep_objects="$p" else predep_objects="$predep_objects $p" fi else if test -z "$postdep_objects"; then postdep_objects="$p" else postdep_objects="$postdep_objects $p" fi fi ;; *) ;; # Ignore the rest. esac done # Clean up. rm -f a.out else echo "ltcf-cxx.sh: error: problem compiling test program" fi $rm -f confest.$objext if test "x$skip_need_lc_check" = "xyes" ; then need_lc=no else case " $postdeps " in *" -lc "*) need_lc=no ;; *) need_lc=yes ;; esac fi kdocumenteditor-1.0/admin/old-ltcf-gcj.sh0100644000076400007640000006411707735744575020441 0ustar tasukuhomeuser#### This script is meant to be sourced by ltconfig. # ltcf-gcj.sh - Create a GCJ compiler specific configuration # # Copyright (C) 1996-1999, 2000, 2001 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # Original GCJ support by: # Alexandre Oliva # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' ## Linker Characteristics case $host_os in cygwin* | mingw*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$with_gcc" != yes; then with_gnu_ld=no fi ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4*) # On AIX, the GNU linker is very broken ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \[$]# in 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$with_gcc" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) hardcode_direct=yes hardcode_libdir_separator=':' link_all_deplibs=yes # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. if test "$with_gcc" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # Test if we are trying to use run time linking, or normal AIX style linking. # If -brtl is somewhere in LDFLAGS, we need to do run time linking. aix_use_runtimelinking=no for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then aix_use_runtimelinking=yes break fi done exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # -bexpall does not export symbols beginning with underscore (_) always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other run time loading flags (-brtl), -berok will # link without error, but may produce a broken library. allow_undefined_flag=' ${wl}-berok' hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else allow_undefined_flag=' ${wl}-berok' # -bexpall does not export symbols beginning with underscore (_) always_export_symbols=yes # Exported symbols can be pulled into shared objects from archives whole_archive_flag_spec=' ' build_libtool_need_lc=yes hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' # This is similar to how AIX traditionally builds it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$with_gcc" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='${wl}-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; openbsd*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$with_gcc" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$with_gcc" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ;; solaris*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no hardcode_direct=no #Motorola manual says yes, but my tests say they lie ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; unixware7*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi ## Compiler Characteristics: PIC flags, static flags, etc # We don't use cached values here since only the C compiler # characteristics should be cached. ac_cv_prog_cc_pic= ac_cv_prog_cc_shlib= ac_cv_prog_cc_wl= ac_cv_prog_cc_static= ac_cv_prog_cc_no_builtin= ac_cv_prog_cc_can_build_shared=$can_build_shared ac_cv_prog_cc_wl='-Wl,' ac_cv_prog_cc_static='-static' case $host_os in beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; aix*) # Below there is a dirty hack to force normal static linking with -ldl # The problem is because libdl dynamically linked with both libc and # libC (AIX C++ library), which obviously doesn't included in libraries # list by gcc. This cause undefined symbols with -static flags. # This hack allows C programs to be linked with "-static -ldl", but # we not sure about C++ programs. ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC" ;; *djgpp*) # DJGPP does not suppot shared libraries at all ac_cv_prog_cc_pic= ;; cygwin* | mingw* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). ac_cv_prog_cc_pic='-DDLL_EXPORT' ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; sysv4*MP*) if test -d /usr/nec; then ac_cv_prog_cc_pic=-Kconform_pic fi ;; *) ac_cv_prog_cc_pic='-fPIC' ;; esac # GCJ did not exist at the time GCC didn't implicitly link libc in. need_lc=no # All existing releases of GCJ support `-c -o'. lt_cv_compiler_c_o=yes kdocumenteditor-1.0/admin/old-ltconfig0100755000076400007640000024555607735744575020157 0ustar tasukuhomeuser#! /bin/sh # ltconfig - Create a system-specific libtool. # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A lot of this script is taken from autoconf-2.10. # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} echo=echo if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec "$SHELL" "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null`} case X$UNAME in *-DOS) PATH_SEPARATOR=';' ;; *) PATH_SEPARATOR=':' ;; esac fi # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string="`eval $cmd`") 2>/dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" for dir in $PATH /usr/ucb; do if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running ltconfig again with it. ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}" export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL" export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # The name of this program. progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'` # Constants: PROGRAM=ltconfig PACKAGE=libtool VERSION=1.4a TIMESTAMP=" (1.641.2.206mm 2001/04/03 21:47:47)" ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' rm="rm -f" help="Try \`$progname --help' for more information." # Global variables: default_ofile=libtool can_build_shared=yes enable_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). enable_static=yes enable_fast_install=yes enable_dlopen=unknown enable_win32_dll=no pic_mode=default ltmain= silent= srcdir= ac_config_guess= ac_config_sub= host= build=NONE nonopt=NONE ofile="$default_ofile" verify_host=yes tagname= with_gcc=no with_gnu_ld=no need_locks=yes ac_ext=c libext=a cache_file= max_cmd_len= ## Dependencies to place before and after the object being linked: predep_objects= postdep_objects= predeps= postdeps= compiler_lib_search_path= ## Link characteristics: allow_undefined_flag= no_undefined_flag= need_lib_prefix=unknown need_version=unknown # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments archive_cmds= archive_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= striplib= old_striplib= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_into_libs=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported runpath_var= link_all_deplibs=unknown always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= ## Tools: old_AR="$AR" old_AR_FLAGS="$AR_FLAGS" old_CC="$CC" old_CFLAGS="$CFLAGS" old_CPPFLAGS="$CPPFLAGS" old_LDFLAGS="$LDFLAGS" old_LIBS="$LIBS" old_MAGIC_CMD="$MAGIC_CMD" old_LD="$LD" old_LN_S="$LN_S" old_LTCC="$LTCC" old_NM="$NM" old_RANLIB="$RANLIB" old_STRIP="$STRIP" old_AS="$AS" old_DLLTOOL="$DLLTOOL" old_OBJDUMP="$OBJDUMP" old_OBJEXT="$OBJEXT" old_EXEEXT="$EXEEXT" old_reload_flag="$reload_flag" old_deplibs_check_method="$deplibs_check_method" old_file_magic_cmd="$file_magic_cmd" # Parse the command line options. args= prev= for option do case $option in -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then eval "$prev=\$option" prev= continue fi case $option in --help) cat <&2 echo "$help" 1>&2 exit 1 ;; *) if test -z "$ltmain"; then ltmain="$option" elif test -z "$host"; then # This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1 # if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then # echo "$progname: warning \`$option' is not a valid host type" 1>&2 # fi host="$option" else echo "$progname: too many arguments" 1>&2 echo "$help" 1>&2 exit 1 fi ;; esac done if test -z "$ltmain"; then echo "$progname: you must specify a LTMAIN file" 1>&2 echo "$help" 1>&2 exit 1 fi if test ! -f "$ltmain"; then echo "$progname: \`$ltmain' does not exist" 1>&2 echo "$help" 1>&2 exit 1 fi if test -n "$tagname"; then # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in "") ;; *) echo "$progname: invalid tag name: $tagname" 1>&2 exit 1 ;; esac if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then echo "$progname: tag name $tagname already exists" 1>&2 exit 1 fi if test ! -f "$ofile"; then echo "$progname: warning: output file \`$ofile' does not exist" 1>&2 fi if test -z "$LTCC"; then eval "`$SHELL $ofile --config | grep '^LTCC='`" if test -z "$LTCC"; then echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2 else echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2 fi fi fi # Quote any args containing shell metacharacters. ltconfig_args= for arg do case $arg in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ltconfig_args="$ltconfig_args '$arg'" ;; *) ltconfig_args="$ltconfig_args $arg" ;; esac done # A relevant subset of AC_INIT. # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 5 compiler messages saved in config.log # 6 checking for... messages and results if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>>./config.log # NLS nuisances. # Only set LANG and LC_ALL to C if already set. # These must not be set unconditionally because not all systems understand # e.g. LANG=C (notably SCO). if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then echo "loading cache $cache_file within ltconfig" . $cache_file fi if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi if test -z "$srcdir"; then # Assume the source directory is the same one as the path to LTMAIN. srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'` test "$srcdir" = "$ltmain" && srcdir=. fi trap "$rm conftest*; exit 1" 1 2 15 if test "$verify_host" = yes; then # Check for config.guess and config.sub. ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/config.guess; then ac_aux_dir=$ac_dir break fi done if test -z "$ac_aux_dir"; then echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2 echo "$help" 1>&2 exit 1 fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub # Make sure we can run config.sub. if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then : else echo "$progname: cannot run $ac_config_sub" 1>&2 echo "$help" 1>&2 exit 1 fi echo $ac_n "checking host system type""... $ac_c" 1>&6 host_alias=$host case $host_alias in "") # Force config.guess to use the C compiler. # CC_FOR_BUILD overrides the CC variable in config.guess but I had # problems with it so do it this way for now. CC="$LTCC" if host_alias=`$SHELL $ac_config_guess`; then : else echo "$progname: cannot guess host type; you must specify one" 1>&2 echo "$help" 1>&2 exit 1 fi # Restore the C compiler. CC="$old_CC" ;; esac host=`$SHELL $ac_config_sub $host_alias` echo "$ac_t$host" 1>&6 # Make sure the host verified. test -z "$host" && exit 1 # Check for the build system type echo $ac_n "checking build system type... $ac_c" 1>&6 build_alias=$build case $build_alias in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`$SHELL $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 elif test -z "$host"; then echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2 echo "$help" 1>&2 exit 1 else host_alias=$host build_alias=$host_alias build=$host fi if test x"$host" != x"$build"; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` # Transform linux* to *-*-linux-gnu*, to support old configure scripts. case $host_os in linux-gnu*) ;; linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" fi # Source the script associated with the $tagname tag configuration. if test -n "$tagname"; then . $ltmain else # FIXME: We should use a variable here # Configure for a C compiler . $srcdir/ltcf-c.sh fi # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$objext" && objext=o echo $ac_n "checking for objdir... $ac_c" 1>&6 rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. objdir=_libs fi rmdir .libs 2>/dev/null echo "$ac_t$objdir" 1>&6 # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # Allow CC to be a program name with arguments. set dummy $CC compiler="$2" # We assume here that the value for ac_cv_prog_cc_pic will not be cached # in isolation, and that seeing it set (from the cache) indicates that # the associated values are set (in the cache) correctly too. echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6 echo "$progname:678:checking for $compiler option to produce PIC" 1>&5 if test -z "$ac_cv_prog_cc_pic"; then echo "$ac_t"none 1>&6 else echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6 # Check to make sure the pic_flag actually works. echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6 echo "$progname:687:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5 if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \ test "X${ac_cv_prog_cc_pic_works}" != X; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_prog_cc_pic_works=yes $rm conftest* echo $lt_simple_compile_test_code > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC" if { (eval echo $progname:697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then # Append any warnings to the config.log. cat conftest.err 1>&5 case $host_os in hpux9* | hpux10* | hpux11*) # On HP-UX, both CC and GCC only warn that PIC is supported... then # they create non-PIC objects. So, if there were any warnings, we # assume that PIC is not supported. if test -s conftest.err; then ac_cv_prog_cc_pic_works=no ac_cv_prog_cc_can_build_shared=no ac_cv_prog_cc_pic= else ac_cv_prog_cc_pic_works=yes ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic" fi ;; *) ac_cv_prog_cc_pic_works=yes ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic" ;; esac else # Append any errors to the config.log. cat conftest.err 1>&5 ac_cv_prog_cc_pic_works=no ac_cv_prog_cc_can_build_shared=no ac_cv_prog_cc_pic= fi CFLAGS="$save_CFLAGS" $rm conftest* fi # Belt *and* braces to stop my trousers falling down: if test "X$ac_cv_prog_cc_pic_works" = Xno; then ac_cv_prog_cc_pic= ac_cv_prog_cc_can_build_shared=no fi echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6 fi # Check for any special shared library compilation flags. if test -n "$ac_cv_prog_cc_shlib"; then echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2 if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$ac_cv_prog_cc_shlib[ ]" >/dev/null; then : else echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 ac_cv_prog_cc_can_build_shared=no fi fi echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6 echo "$progname:749: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5 if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \ test "X${ac_cv_prog_cc_static_works}" != X; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm conftest* echo $lt_simple_link_test_code > conftest.$ac_ext save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static" if { (eval echo $progname:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_static_works=yes else ac_cv_prog_cc_static_works=no ac_cv_prog_cc_static= fi LDFLAGS="$save_LDFLAGS" $rm conftest* fi # Belt *and* braces to stop my trousers falling down: if test "X$ac_cv_prog_cc_static_works" = Xno; then ac_cv_prog_cc_static= fi echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6 pic_flag="$ac_cv_prog_cc_pic" special_shlib_compile_flags="$ac_cv_prog_cc_shlib" wl="$ac_cv_prog_cc_wl" link_static_flag="$ac_cv_prog_cc_static" no_builtin_flag="$ac_cv_prog_cc_no_builtin" can_build_shared="$ac_cv_prog_cc_can_build_shared" # find the maximum length of command line arguments echo "$progname:780: finding the maximum length of command line arguments" 1>&5 echo $ac_n "finding the maximum length of command line arguments... $ac_c" 1>&6 if test "${lt_cv_sys_max_cmd_len+set}" = set; then echo $ac_n "(cached) $ac_c" 1>&6 else i=0 testring="ABCDEF" while test `$CONFIG_SHELL $0 --fallback-echo "X$testring" >/dev/null 2>&1` == `echo "X$testring" >/dev/null 2>&1` && new_result=`expr "X$testring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 32 # 1 MB should be enough do i=`expr $i + 1` testring=$testring$testring done testring= # add a significant safety factor because C++ compilers can tack on massive amounts # of additional arguments before passing them to the linker. 1/4 should be good. len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len` fi echo "$progname:@lineno@: result: $lt_cv_sys_max_cmd_len" 1>&5 echo "${ac_t}$lt_cv_sys_max_cmd_len" 1>&6 if test -n $lt_cv_sys_max_cmd_len ; then max_cmd_len=$lt_cv_sys_max_cmd_len else max_cmd_len=none fi # Check to see if options -o and -c are simultaneously supported by compiler echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6 if test "${lt_cv_compiler_c_o+set}" = set; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm -r conftest 2>/dev/null mkdir conftest cd conftest $rm conftest* echo $lt_simple_compile_test_code > conftest.$ac_ext mkdir out # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$objext" echo "$progname:829: checking if $compiler supports -c -o file.$objext" >&5 if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then lt_cv_compiler_c_o=no else lt_cv_compiler_c_o=yes fi else # Append any errors to the config.log. cat out/conftest.err 1>&5 lt_cv_compiler_c_o=no fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm -r conftest 2>/dev/null fi compiler_c_o=$lt_cv_compiler_c_o echo "${ac_t}$compiler_c_o" 1>&6 # Check to see if we can do hard links to lock some files if needed hard_links="nottested" if test "$compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6 hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no echo "$ac_t$hard_links" 1>&6 $rm conftest* if test "$hard_links" = no; then echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2 need_locks=warn fi else need_locks=no fi if test "$with_gcc" = yes; then # Check to see if options -fno-rtti -fno-exceptions are supported by compiler echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6 $rm conftest* echo $lt_simple_compile_test_code > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" echo "$progname:883: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 if { (eval echo $progname:884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then echo "$ac_t"no 1>&6 compiler_rtti_exceptions=no else echo "$ac_t"yes 1>&6 compiler_rtti_exceptions=yes fi else # Append any errors to the config.log. cat conftest.err 1>&5 compiler_rtti_exceptions=no echo "$ac_t"no 1>&6 fi CFLAGS="$save_CFLAGS" $rm conftest* if test "$compiler_rtti_exceptions" = "yes"; then no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' else no_builtin_flag=' -fno-builtin' fi fi # See if the linker supports building shared libraries. echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6 echo "$ac_t$ld_shlibs" 1>&6 test "$ld_shlibs" = no && can_build_shared=no # Check hardcoding attributes. echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$hardcode_shlibpath_var" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi echo "$ac_t$hardcode_action" 1>&6 echo $ac_n "checking whether stripping libraries is possible... $ac_c" 1>&6 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" echo "${ac_t}yes" 1>&6 else echo "${ac_t}no" 1>&6 fi case $reload_flag in "" | " "*) ;; *) reload_flag=" $reload_flag" ;; esac reload_cmds='$LD$reload_flag -o $output$reload_objs' test -z "$deplibs_check_method" && deplibs_check_method=unknown # PORTME Fill in your ld.so characteristics library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6 case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH else # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. # We preserve .a as extension for shared libraries though AIX4.2 # and later linker supports .so if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so instead of # lib.a to let people know that these are not typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' # We want symlinks to be created for the different names. version_type=linux else # We preserve .a as extension for shared libraries though AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major.o' fi # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' else export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' fi shlibpath_var=LIBPATH deplibs_check_method=pass_all # Put the right runpath into libraries. hardcode_into_libs=yes case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. can_build_shared=no fi ;; esac fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $with_gcc,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll; $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}.`test .$module = .yes && echo so || echo dylib` ${libname}${release}${major}.$`test .$module = .yes && echo so || echo dylib` ${libname}.`test .$module = .yes && echo so || echo dylib`' soname_spec='${libname}${release}${major}.`test .$module = .yes && echo so || echo dylib`' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; *) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos hardcode_into_libs=all need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) dynamic_linker=no ;; # This must be Linux ELF. linux-gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' need_version=yes else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos if test "$with_gnu_ld" = yes; then need_lib_prefix=no need_version=no fi library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH # OpenBSD 2.7 the overriding is needed for fast-install shlibpath_overrides_runpath=yes ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" hardcode_into_libs=yes ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; *) dynamic_linker=no ;; esac echo "$ac_t$dynamic_linker" 1>&6 test "$dynamic_linker" = no && can_build_shared=no # Check for command to grab the raw symbol name followed by C symbol from nm. echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6 # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'" ;; irix*) symcode='[BCDEGRST]' ;; solaris* | sysv5*) symcode='[BDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then symcode='[ABCDGISTW]' fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no $rm conftest* cat > conftest.$ac_ext <&5 if { (eval echo $progname:1424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then # Now try to grab the symbols. nlist=conftest.nm if { echo "$progname:1427: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[] = { EOF sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$objext conftstm.$objext save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="conftstm.$objext" CFLAGS="$CFLAGS$no_builtin_flag" if { (eval echo $progname:1479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then pipe_works=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi LIBS="$save_LIBS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi $rm conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else global_symbol_pipe= fi done if test "$pipe_works" = yes; then echo "${ac_t}ok" 1>&6 else echo "${ac_t}failed" 1>&6 fi if test -z "$global_symbol_pipe"; then global_symbol_to_cdecl= fi # Report the final consequences. echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6 # Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in # configure.in, otherwise build static only libraries. case $host_os in cygwin* | mingw* | pw32* | os2*) if test x$can_build_shared = xyes; then test x$enable_win32_dll = xno && can_build_shared=no echo "checking if package supports dlls... $can_build_shared" 1>&6 fi ;; esac echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6 test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4* | aix5*) test "$enable_shared" = yes && enable_static=no ;; esac echo "$ac_t$enable_shared" 1>&6 # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes echo "checking whether to build static libraries... $enable_static" 1>&6 if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$with_gcc" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi # Check whether we must set pic_mode to default test -z "$pic_flag" && pic_mode=default if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else if test "X${lt_cv_dlopen+set}" != Xset; then lt_cv_dlopen=no lt_cv_dlopen_libs= echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 echo "$progname:1583: checking for dlopen in -ldl" >&5 if test "X${ac_cv_lib_dl_dlopen+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_lib_dl_dlopen=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_lib_dl_dlopen=no fi rm -f conftest* LIBS="$ac_save_LIBS" fi if test "X$ac_cv_lib_dl_dlopen" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen""... $ac_c" 1>&6 echo "$progname:1622: checking for dlopen" >&5 if test "X${ac_cv_func_dlopen+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char dlopen(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else dlopen(); #endif ; return 0; } EOF if { (eval echo $progname:1652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_dlopen=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_func_dlopen=no fi rm -f conftest* fi if test "X$ac_cv_func_dlopen" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 echo "$progname:1669: checking for dlopen in -lsvld" >&5 if test "X${ac_cv_lib_svld_dlopen+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsvld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_lib_svld_dlopen=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_lib_svld_dlopen=no fi rm -f conftest* LIBS="$ac_save_LIBS" fi if test "X$ac_cv_lib_svld_dlopen" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 echo "$progname:1708: checking for dld_link in -ldld" >&5 if test "X${ac_cv_lib_dld_dld_link+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_lib_dld_dld_link=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_lib_dld_dld_link=no fi rm -f conftest* LIBS="$ac_save_LIBS" fi if test "X$ac_cv_lib_dld_dld_link" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shl_load""... $ac_c" 1>&6 echo "$progname:1747: checking for shl_load" >&5 if test "X${ac_cv_func_shl_load+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char shl_load(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else shl_load(); #endif ; return 0; } EOF if { (eval echo $progname:1777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_shl_load=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_func_shl_load=no fi rm -f conftest* fi if test "X$ac_cv_func_shl_load" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 echo "$progname:1795: checking for shl_load in -ldld" >&5 if test "X${ac_cv_lib_dld_shl_load+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_lib_dld_shl_load=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_lib_dld_shl_load=no fi rm -f conftest* LIBS="$ac_save_LIBS" fi if test "X$ac_cv_lib_dld_shl_load" = Xyes; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else echo "$ac_t""no" 1>&6 fi fi fi fi fi fi fi if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) for ac_hdr in dlfcn.h; do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "$progname:1863: checking for $ac_hdr" >&5 if eval "test \"`echo 'X$''{'ac_cv_header_$ac_safe'+set}'`\" = Xset"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int fnord = 0; int main () { return(0); } EOF ac_try="$ac_compile >/dev/null 2>conftest.out" { (eval echo $progname:1874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi done if test "x$ac_cv_header_dlfcn_h" = xyes; then CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" fi eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" LIBS="$lt_cv_dlopen_libs $LIBS" echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 echo "$progname:1902: checking whether a program can dlopen itself" >&5 if test "X${lt_cv_dlopen_self+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then lt_cv_dlopen_self=cross else cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LTDL_GLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LTDL_GLOBAL DL_GLOBAL # else # define LTDL_GLOBAL 0 # endif #endif /* We may have to define LTDL_LAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LTDL_LAZY_OR_NOW # ifdef RTLD_LAZY # define LTDL_LAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LTDL_LAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LTDL_LAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LTDL_LAZY_OR_NOW DL_NOW # else # define LTDL_LAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42; } int main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1;} EOF if { (eval echo $progname:1957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then lt_cv_dlopen_self=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* lt_cv_dlopen_self=no fi rm -fr conftest* fi fi echo "$ac_t""$lt_cv_dlopen_self" 1>&6 if test "$lt_cv_dlopen_self" = yes; then LDFLAGS="$LDFLAGS $link_static_flag" echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 echo "$progname:1976: checking whether a statically linked program can dlopen itself" >&5 if test "X${lt_cv_dlopen_self_static+set}" = Xset; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then lt_cv_dlopen_self_static=cross else cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LTDL_GLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LTDL_GLOBAL DL_GLOBAL # else # define LTDL_GLOBAL 0 # endif #endif /* We may have to define LTDL_LAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LTDL_LAZY_OR_NOW # ifdef RTLD_LAZY # define LTDL_LAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LTDL_LAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LTDL_LAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LTDL_LAZY_OR_NOW DL_NOW # else # define LTDL_LAZY_OR_NOW 0 # endif # endif # endif # endif #endif void fnord() { int i=42; } int main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW); if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord"); if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); return 1; } EOF if { (eval echo $progname:2031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then lt_cv_dlopen_self_static=yes else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* lt_cv_dlopen_self_static=no fi rm -fr conftest* fi fi echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 fi ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi # Copy echo and quote the copy, instead of the original, because it is # used later. ltecho="$echo" if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then ltecho="$CONFIG_SHELL \$0 --fallback-echo" fi LTSHELL="$SHELL" LTCONFIG_VERSION="$VERSION" # Only quote variables if we're using ltmain.sh. case $ltmain in *.sh) # Now quote all the things that may contain metacharacters. for var in ltecho old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \ old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \ old_LN_S old_NM old_RANLIB old_STRIP \ old_AS old_DLLTOOL old_OBJDUMP \ old_OBJEXT old_EXEEXT old_reload_flag \ old_deplibs_check_method old_file_magic_cmd \ AR AR_FLAGS CC LTCC LD LN_S NM LTSHELL LTCONFIG_VERSION \ reload_flag reload_cmds wl \ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ thread_safe_flag_spec whole_archive_flag_spec libname_spec \ library_names_spec soname_spec \ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ predep_objects postdep_objects predeps postdeps compiler_lib_search_path \ old_striplib striplib file_magic_cmd export_symbols_cmds \ deplibs_check_method allow_undefined_flag no_undefined_flag \ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ hardcode_libdir_flag_spec hardcode_libdir_separator \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ compiler_c_o need_locks exclude_expsyms include_expsyms; do case $var in reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ postinstall_cmds | postuninstall_cmds | \ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ### testsuite: skip nested quoting test ;; *) eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ### testsuite: skip nested quoting test ;; esac done case $ltecho in *'\$0 --fallback-echo"') ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac if test -z "$tagname"; then trap "$rm \"$ofile\"; exit 1" 1 2 15 echo "creating $ofile" $rm "$ofile" cat < "$ofile" #! $SHELL # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # The names of the tagged configurations supported by this script. available_tags= ### BEGIN LIBTOOL CONFIG EOF else echo "appending configuration tag \"$tagname\" to $ofile" echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile" fi cfgfile="$ofile" ;; *) # Double-quote the variables that need it (for aesthetics). for var in old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \ old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \ old_LN_S old_NM old_RANLIB old_STRIP \ old_AS old_DLLTOOL old_OBJDUMP \ old_OBJEXT old_EXEEXT old_reload_flag \ old_deplibs_check_method old_file_magic_cmd; do eval "$var=\\\"\$var\\\"" done # Just create a config file. cfgfile="$ofile.cfg" if test -z "$tagname"; then trap "$rm \"$cfgfile\"; exit 1" 1 2 15 echo "creating $cfgfile" $rm "$cfgfile" cat < "$cfgfile" # `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) ### BEGIN LIBTOOL CONFIG EOF else echo "appending to $cfgfile" echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile" fi ;; esac cat <> "$cfgfile" # Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # # AR=$old_AR AR_FLAGS=$old_AR_FLAGS LTCC=$old_LTCC CC=$old_CC \\ # CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\ # MAGIC_CMD=$old_MAGIC_CMD LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\ # LN_S=$old_LN_S NM=$old_NM RANLIB=$old_RANLIB STRIP=$old_STRIP \\ # AS=$old_AS DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP \\ # objext=$old_OBJEXT exeext=$old_EXEEXT reload_flag=$old_reload_flag \\ # deplibs_check_method=$old_deplibs_check_method \\ # file_magic_cmd=$old_file_magic_cmd \\ # $0$ltconfig_args # # Compiler and other test output produced by $progname, useful for # debugging $progname, is in ./config.log if it exists. # The version of $progname that generated this script. LTCONFIG_VERSION=$LTCONFIG_VERSION # Shell to use when invoking shell scripts. SHELL=$LTSHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$need_lc # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$ltecho # The archiver. AR=$AR AR_FLAGS=$AR_FLAGS # A C compiler. LTCC=$LTCC # A language-specific compiler. CC=$CC # Is the compiler the GNU C compiler? with_gcc=$with_gcc # The linker used to build libraries. LD=$LD # Whether we need hard or soft links. LN_S=$LN_S # A BSD-compatible nm program. NM=$NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$reload_flag reload_cmds=$reload_cmds # How to pass a linker flag through the compiler. wl=$wl # Object file suffix (normally "o"). objext="$objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$pic_flag pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$compiler_c_o # Must we lock files when doing compilation ? need_locks=$need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$link_static_flag # Compiler flag to turn off builtin functions. no_builtin_flag=$no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$library_names_spec # The coded name of the library, if different from the real name. soname_spec=$soname_spec # Commands used to build and install an old-style archive. RANLIB=$RANLIB old_archive_cmds=$old_archive_cmds old_postinstall_cmds=$old_postinstall_cmds old_postuninstall_cmds=$old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$archive_cmds archive_expsym_cmds=$archive_expsym_cmds postinstall_cmds=$postinstall_cmds postuninstall_cmds=$postuninstall_cmds # Commands to strip libraries. old_striplib=$old_striplib striplib=$striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$predep_objects # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$postdep_objects # Dependencies to place before the objects being linked to create a # shared library. predeps=$predeps # Dependencies to place after the objects being linked to create a # shared library. postdeps=$postdeps # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$compiler_lib_search_path # Method to check whether dependent libraries are shared objects. deplibs_check_method=$deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$global_symbol_to_cdecl # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$hardcode_libdir_separator # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$fix_srcfile_path" # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$exclude_expsyms # Symbols that must always be exported. include_expsyms=$include_expsyms EOF if test -z "$tagname"; then echo '### END LIBTOOL CONFIG' >> "$ofile" else echo "### END LIBTOOL TAG CONFIG: $tagname" >> "$ofile" fi case $ltmain in *.sh) echo >> "$ofile" if test -z "$tagname"; then case $host_os in aix3*) cat <<\EOF >> "$ofile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) cat <<'EOF' >> "$ofile" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments # /* impgen.c starts here */ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i> "$ofile" || (rm -f "$ofile"; exit 1) # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? chmod +x "$ofile" fi ;; *) # Compile the libtool program. echo "FIXME: would compile $ltmain" ;; esac # Update the list of available tags. if test -n "$tagname"; then # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" $ofile | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` # Append the new tag name to the list of available tags. available_tags="$available_tags $tagname" # Now substitute the updated of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' ${ofile} > ${ofile}.new"; then mv ${ofile}.new ${ofile} chmod +x "$ofile" else rm -f ${ofile}.new echo "$progname: unable to update list of available tagged configurations." exit 1 fi fi # Don't cache tagged configuration! test -n "$cache_file" && test -z "$tagname" || exit 0 # AC_CACHE_SAVE trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache exit 0 # Local Variables: # mode:shell-script # sh-indentation:2 # End: kdocumenteditor-1.0/admin/old-ltmain.sh0100644000076400007640000045430607735744575020237 0ustar tasukuhomeuser# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun ltconfig. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" # Parse our command line options once, thoroughly. while test $# -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; tag) tagname="$arg" # Check whether tagname contains only valid characters case $tagname in *[!-_A-Za-z0-9,/]*) echo "$progname: invalid tag name: $tagname" 1>&2 exit 1 ;; esac if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then taglist="$taglist $tagname" # Evaluate the configuration. eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" else echo "$progname: ignoring unknown tag $tagname" 1>&2 fi ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" exit 0 ;; --config) sed -n -e '/^### BEGIN LIBTOOL CONFIG/,/^### END LIBTOOL CONFIG/p' < "$0" # Now print the configurations for the tags. for tagname in $taglist; do sed -n -e "/^### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" done exit 0 ;; --debug) echo "$progname: enabling shell trace mode" set -x ;; --dry-run | -n) run=: ;; --features) echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit 0 ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --quiet | --silent) show=: ;; --tag) prevopt="--tag" prev=tag ;; --tag=*) set tag "$optarg" ${1+"$@"} shift prev=tag ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit 1 ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit 1 fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= prev= lastarg= srcfile="$nonopt" suppress_output= user_target=no for arg do case $prev in "") ;; xcompiler) # Aesthetically quote the previous argument. prev= lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac # Accept any command-line options. case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit 1 fi user_target=next ;; -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; -Xcompiler) prev=xcompiler continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac case $user_target in next) # The next one is the -o target name user_target=yes continue ;; yes) # We got the output file user_target=set libobj="$arg" continue ;; esac # Accept the current argument as the source file. lastarg="$srcfile" srcfile="$arg" # Aesthetically quote the previous argument. # Backslashify any backslashes, double quotes, and dollar signs. # These are the only characters that are still specially # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $lastarg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi done case $user_target in set) ;; no) # Get the name of the library object. libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; *) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit 1 ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; *.java) xform=java ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit 1 ;; esac # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base compile # command doesn't match the default compiler. if test -n "$available_tags" && test -z "$tagname"; then case $base_compile in "$CC "*) ;; # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when ltconfig was run. "`$echo $CC` "*) ;; *) for z in $available_tags; do if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then # Evaluate the configuration. eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" case $base_compile in "$CC "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; "`$echo $CC` "*) tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then echo "$modename: unable to infer tagged configuration" echo "$modename: specify a tag with \`--tag'" 1>&2 exit 1 # else # echo "$modename: using $tagname tagged configuration" fi ;; esac fi objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir= else xdir=$xdir/ fi lobj=${xdir}$objdir/$objname if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit 1 fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $lobj $libobj ${libobj}T" else removelist="$lobj $libobj ${libobj}T" fi $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 else output_obj= need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi echo $srcfile > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi $run $rm "$libobj" "${libobj}T" # Create a libtool object file (analogous to a ".la" file), # but don't create it if we're doing a dry run. test -z "$run" && cat > ${libobj}T </dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then $show "$mv $output_obj $lobj" if $run $mv $output_obj $lobj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the PIC object to the libtool object file. test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Append the name of the non-PIC object the libtool object file. # Only append if the libtool object file exists. test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi else if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi fi build_libtool_libs=no build_old_libs=yes prefer_static_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test $# -gt 0; do arg="$1" base_compile="$base_compile $arg" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit 1 fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; objectlist) if test -f "$arg"; then save_arg=$arg moreargs= for fil in `cat $save_arg` do # moreargs="$moreargs $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit 1 fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit 1 else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi done else $echo "$modename: link input file \`$save_arg' does not exist" exit 1 fi arg=$save_arg prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: not more than one -exported-symbols argument allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 exit 1 fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac continue ;; -l*) if test "$arg" = "-lc"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # These systems don't actually have c library (as such) continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" continue ;; esac elif test "$arg" = "-lm"; then case $host in *-*-cygwin* | *-*-pw32* | *-*-beos*) # These systems don't actually have math library (as such) continue ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody math library is in the System framework deplibs="$deplibs -framework System" continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # The PATH hackery in wrapper scripts is required on Windows # in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -objectlist) prev=objectlist continue ;; -o) prev=output ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac add_flags="$add_flags $arg" ;; *.$objext) # A standard object. objs="$objs $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then pic_object= non_pic_object= # Read the .lo file # If there is no directory component, then add one. case $arg in */* | *\\*) . $arg ;; *) . ./$arg ;; esac if test -z "$pic_object" || \ test -z "$non_pic_object" || test "$pic_object" = none && \ test "$non_pic_object" = none; then $echo "$modename: cannot find name of object for \`$arg'" 1>&2 exit 1 fi # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. pic_object="$xdir$pic_object" if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $pic_object" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles $pic_object" prev= fi # A PIC object. libobjs="$libobjs $pic_object" arg="$pic_object" fi # Non-PIC object. if test "$non_pic_object" != none; then # Prepend the subdirectory the object is found in. non_pic_object="$xdir$non_pic_object" # A standard non-PIC object non_pic_objects="$non_pic_objects $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi fi else # Only an error if not doing a dry-run. if test -z "$run"; then $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 exit 1 else # Dry-run case. # Extract subdirectory from the argument. xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$arg"; then xdir= else xdir="$xdir/" fi pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` libobjs="$libobjs $pic_object" non_pic_objects="$non_pic_objects $non_pic_object" fi fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac add_flags="$add_flags $arg" ;; esac # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi # Infer tagged configuration to use if any are available and # if one wasn't chosen via the "--tag" command line option. # Only attempt this if the compiler in the base link # command doesn't match the default compiler. if test -n "$available_tags" && test -z "$tagname"; then case $base_compile in "$CC "*) ;; # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when ltconfig was run. "`$echo $CC` "*) ;; *) for z in $available_tags; do if grep "^### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then # Evaluate the configuration. eval "`sed -n -e '/^### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" case $base_compile in "$CC "*) # The compiler in $compile_command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. tagname=$z break ;; "`$echo $CC` "*) tagname=$z break ;; esac fi done # If $tagname still isn't set, then no tagged configuration # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then echo "$modename: unable to infer tagged configuration" echo "$modename: specify a tag with \`--tag'" 1>&2 exit 1 # else # echo "$modename: using $tagname tagged configuration" fi ;; esac fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d $output_objdir; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir status=$? if test $status -ne 0 && test ! -d $output_objdir; then exit $status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac libs="$libs $deplib" done if test $linkmode = lib; then libs="$predeps $libs $compiler_lib_search_path $postdeps" fi deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries uninst_deplibs= # uninstalled libtool libraries uninst_path= # paths that contain uninstalled libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit 1 ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" deplibs= fi if test $linkmode = prog; then case $pass in dlopen) libs="$dlfiles" ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi if test $pass = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi for deplib in $libs; do lib= found=no case $deplib in -l*) if test $linkmode != lib && test $linkmode != prog; then $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 continue fi if test $pass = conv; then deplibs="$deplib $deplibs" continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do # Search the libtool library lib="$searchdir/lib${name}.la" if test -f "$lib"; then found=yes break fi done if test "$found" != yes; then if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test $pass = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test $pass = conv; then deplibs="$deplib $deplibs" continue fi if test $pass = scan; then deplibs="$deplib $deplibs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 ;; esac continue ;; -R*) if test $pass = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test $pass = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) if test "$deplibs_check_method" != pass_all; then echo echo "*** Warning: This library needs some functionality provided by $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." else echo echo "*** Warning: Linking the shared library $output against the" echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test $pass != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac ;; *.lo | *.$objext) if test $pass = conv; then deplibs="$deplib $deplibs" elif test $linkmode = prog; then if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac if test $found = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 exit 1 fi # Check to see that this really is a libtool archive. if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variable installed. installed=yes # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test $linkmode != prog && test $linkmode != lib; }; then test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test $pass = conv; then # only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done elif test $linkmode != prog && test $linkmode != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit 1 fi continue fi # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # This library was specified with -dlopen. if test $pass = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit 1 fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. dlprefiles="$dlprefiles $lib $dependency_libs" else newdlfiles="$newdlfiles $lib" fi continue fi # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later uninst_path="$uninst_path $abs_ladir" fi name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test $pass = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit 1 fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi if test -z "$libdir"; then # link the convenience library if test $linkmode = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" # used for prog,scan pass fi continue fi if test $linkmode = prog && test $pass != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test $linkalldeplibs = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done continue fi if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var"; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $dir" ;; esac fi # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi fi link_static=no # Whether the deplib will be linked statically if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then if test "$installed" = no; then uninst_deplibs="$uninst_deplibs $lib" need_relink=yes fi # This is a shared library if test $linkmode = lib && test "$hardcode_into_libs" = all; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`echo $soroot | sed -e 's/^.*\///'` newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' eval cmds=\"$extract_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' eval cmds=\"$old_archive_from_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi if test $linkmode = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit 1 fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test $linkmode = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test $linkmode = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" add="-l$name" fi if test $linkmode = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test $linkmode = prog; then # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo echo "*** Warning: This library needs some functionality provided by $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." else convenience="$convenience $dir/$old_library" old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi fi if test $linkmode = lib; then if test -n "$dependency_libs" && { test $hardcode_into_libs != yes || test $build_old_libs = yes || test $link_static = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done if test $link_all_deplibs != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="-L$absdir/$objdir" else eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="-L$absdir" fi ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac done fi fi done dependency_libs="$newdependency_libs" if test $pass = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test $pass != dlopen; then if test $pass != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Make sure that $var contains only unique libraries # and add them in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do case "$deplib" in -L*) new_libs="$deplib $new_libs" ;; *) case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done fi done if test $linkmode = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit 1 fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit 1 else echo echo "*** Warning: Linking the shared library $output against the non-libtool" echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test $# -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. # Some compilers have problems with a `.al' extension so # convenience libraries should have the same extension an # archive normally would. oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit 1 fi current="$2" revision="$3" age="$4" # Check that each of the things are valid numbers. case $current in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $revision in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $age in 0 | [1-9] | [1-9][0-9]*) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac if test $age -gt $current; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix) major=`expr $current - $age + 1` verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test $loop != 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test $loop != 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= verstring="0.0" if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= tempremovelist=`echo "$output_objdir/*"` for p in $tempremovelist; do case $p in *.$objext) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) removelist="$removelist $p" ;; *) ;; esac done if test -n "$removelist"; then $show "${rm}r $removelist" $run ${rm}r $removelist fi fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. for path in $uninst_path; do lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test $hardcode_into_libs != yes || test $build_old_libs = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *) # Add libc to deplibs on all other systems if necessary. if test $build_libtool_need_lc = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behaviour. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | sed 10q \ | egrep "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done if test -n "$a_deplib" ; then droppeddeps=yes echo echo "*** Warning: This library needs some functionality provided by $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | grep . >/dev/null; then echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" echo "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test $allow_undefined = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test $hardcode_into_libs = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi if test x$dlname = x; then dlname=$soname fi lib="$output_objdir/$realname" for link do linknames="$linknames $link" done # # Ensure that we have .o objects for linkers which dislike .lo # # (e.g. aix) in case we are running --disable-static # for obj in $libobjs; do # xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` # if test "X$xdir" = "X$obj"; then # xdir="." # else # xdir="$xdir" # fi # baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` # oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` # if test ! -f $xdir/$oldobj && test "$baseobj" != "$oldobj"; then # $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" # $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? # fi # done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols eval cmds=\"$export_symbols_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "$mkdir $xdir" $run $mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink && test "$hardcode_into_libs" = all; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Add all flags from the command line. We here create a library, # but those flags were only added to compile_command and # finalize_command, which are only used when creating executables. # So do it by hand here. compiler_flags="$compiler_flags $add_flags" # Only add it to commands which use CC, instead of LD, i.e. # only to $compiler_flags #linker_flags="$linker_flags $add_flags" # Do each of the archive commands. if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval cmds=\"$archive_expsym_cmds\" else eval cmds=\"$archive_cmds\" fi if len=`expr "X$cmds" : ".*"` && test $len -le $max_cmd_len; then : else # The command line is too long to link in one step, link piecewise. $echo "creating reloadable object files..." # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we # want to use save_libobjs as it was before # whole_archive_flag_spec was expanded, because we can't # assume the linker understands whole_archive_flag_spec. # This may have to be revisited, in case too many # convenience libraries get linked in and end up exceeding # the spec. if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then save_libobjs=$libobjs fi save_output=$output # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= delfiles= last_robj= k=1 output=$output_objdir/$save_output-${k}.$objext # Loop over the list of objects to be linked. for obj in $save_libobjs do eval test_cmds=\"$reload_cmds $objlist $last_robj\" if test "X$objlist" = X || { len=`expr "X$test_cmds" : ".*"` && test $len -le $max_cmd_len; }; then objlist="$objlist $obj" else # The command $test_cmds is almost too long, add a # command to the queue. if test $k -eq 1 ; then # The first file doesn't have a previous command to add. eval concat_cmds=\"$reload_cmds $objlist $last_robj\" else # All subsequent reloadable object files will link in # the last one created. eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" fi last_robj=$output_objdir/$save_output-${k}.$objext k=`expr $k + 1` output=$output_objdir/$save_output-${k}.$objext objlist=$obj len=1 fi done # Handle the remaining objects by creating one last # reloadable object file. All subsequent reloadable object # files will link in the last one created. test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" # Set up a command to remove the reloadale object files # after they are used. i=0 while test $i -lt $k do i=`expr $i + 1` delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" done $echo "creating a temporary reloadable object file: $output" # Loop through the commands generated above and execute them. IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $concat_cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" libobjs=$output # Restore the value of output. output=$save_output if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. # Do each of the archive commands. if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval cmds=\"$archive_expsym_cmds\" else eval cmds=\"$archive_cmds\" fi # Append the command to remove the reloadable object files # to the just-reset $cmds. eval cmds=\"\$cmds~$rm $delfiles\" fi IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink && test "$hardcode_into_libs" = all; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? exit 0 fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "$mkdir $xdir" $run $mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" # $run eval "echo timestamp > $libobj" || exit $? exit 0 fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" eval cmds=\"$reload_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # else # # Just create a symlink. # $show $rm $libobj # $run $rm $libobj # xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` # if test "X$xdir" = "X$libobj"; then # xdir="." # else # xdir="$xdir" # fi # baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` # oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` # $show "(cd $xdir && $LN_S $oldobj $baseobj)" # $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 ;; prog) case $host in *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles="$objs$old_deplibs" for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`echo "$arg" | sed -e 's%^.*/%%'` $run eval 'echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[] = {\ " sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr_t) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit 1 ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath. # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld. # This does not apply on AIX for ia64, which uses a SysV linker. case "$host" in ia64-*-aix5*) ;; *-*-aix4* | *-*-aix5*) compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;; esac if test $need_relink = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit 0 fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="cd `pwd`; $relink_command" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe ;; *) exeext= ;; esac $rm $output trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: uninst_deplibs='$uninst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if (eval \$relink_command); then : else $rm \"\$progdir/\$file\" exit 1 fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # win32 systems need to use the prog path for dll # lookup to work *-*-cygwin* | *-*-pw32*) $echo >> $output "\ exec \$progdir/\$program \${1+\"\$@\"} " ;; # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; *) $echo >> $output "\ # Export the path to the program. PATH=\"\$progdir:\$PATH\" export PATH exec \$program \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" exit 1 fi else # The program doesn't exist. \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " chmod +x $output fi exit 0 ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$objs$old_deplibs $non_pic_objects" fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "$mkdir $gentop" $run $mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "$mkdir $xdir" $run $mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print | $NL2SP` done fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else # # Ensure that we have .o objects in place in case we decided # # not to build a shared library, and have fallen back to building # # static libs even though --disable-static was passed! # for oldobj in $oldobjs; do # if test ! -f $oldobj; then # xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` # if test "X$xdir" = "X$oldobj"; then # xdir="." # else # xdir="$xdir" # fi # baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` # obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` # $show "(cd $xdir && ${LN_S} $obj $baseobj)" # $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? # fi # done compiler_flags="$compiler_flags $add_flags" eval cmds=\"$old_archive_cmds\" if len=`expr "X$cmds" : ".*"` && test $len -le $max_cmd_len; then : else # the command line is too long to link in one step, link in parts $echo "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs for obj in $save_oldobjs do oldobjs="$objlist $obj" objlist="$objlist $obj" eval test_cmds=\"$old_archive_cmds\" if len=`expr "X$test_cmds" : ".*"` && test $len -le $max_cmd_len; then : else # the above command should be used before it gets too long oldobjs=$objlist test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= fi done RANLIB=$save_RANLIB oldobjs=$objlist eval cmds=\"\$concat_cmds~$old_archive_cmds\" fi fi IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test $hardcode_into_libs = all && test "$installed" = no && test $need_relink = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg="$nonopt" fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest="$arg" continue fi case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; -m) prev="-m" ;; -o) prev="-o" ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest="$arg" continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit 1 fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test $# -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit 1 fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test "$hardcode_into_libs" = all && test -n "$relink_command"; then $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 continue fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test "$hardcode_into_libs" = all && test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test $# -gt 0; then # Delete the old symlinks, and create new ones. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit 0 ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then uninst_deplibs= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. if test -z "$uninst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes for lib in $uninst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" tmpdir="$tmpdir/libtool-$$" if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : else $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyways case $install_prog,$host in */usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`echo $destfile | sed -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec $SHELL $0 --finish$current_libdirs exit 1 fi exit 0 ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do echo " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" echo "more information, such as the ld(1) and ld.so(8) manual pages." echo "----------------------------------------------------------------------" exit 0 ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit 1 fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit 1 fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit 1 fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved enviroment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi if test "${save_LANG+set}" = set; then LANG="$save_LANG"; export LANG fi # Now actually exec the command. eval "exec \$cmd$args" $echo "$modename: cannot exec \$cmd$args" exit 1 else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit 0 fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit 1 fi rmdirs= for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$objdir" else objdir="$dir/$objdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test $mode = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test $mode = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" if test $mode = uninstall; then if test -n "$library_names"; then # Do each command in the postuninstall commands. eval cmds=\"$postuninstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. eval cmds=\"$old_postuninstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. fi fi ;; *.lo) # Possibly a libtool object, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # Read the .lo file . $dir/$name # Add PIC object to the list of files to remove. if test -n "$pic_object" \ && test "$pic_object" != none; then rmfiles="$rmfiles $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. if test -n "$non_pic_object" \ && test "$non_pic_object" != none; then rmfiles="$rmfiles $dir/$non_pic_object" fi fi ;; *) # Do a test to see if this is a libtool program. if test $mode = clean && (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$file rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit 0 ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit 1 ;; esac $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit 1 fi # test -z "$show_help" # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE." exit 0 ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -objectlist FILE Use a list of object files found in FILE to specify objects -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac echo $echo "Try \`$modename --help' for more information about other modes." exit 0 # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting # choices, we go for a static library, that is the most portable, # since we can't tell whether shared libraries were disabled because # the user asked for that or because the platform doesn't support # them. This is particularly important on AIX, because we don't # support having both static and shared libraries enabled at the same # time on that platform, so we default to a shared-only configuration. # If a disable-shared tag is given, we'll fallback to a static-only # configuration. But we'll never go from static-only to shared-only. ### BEGIN LIBTOOL TAG CONFIG: disable-shared build_libtool_libs=no build_old_libs=yes ### END LIBTOOL TAG CONFIG: disable-shared ### BEGIN LIBTOOL TAG CONFIG: disable-static build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: kdocumenteditor-1.0/admin/new-libtool.m4.in0120777000076400007640000000000007742332216023776 2old-libtool.m4.inustar tasukuhomeuserkdocumenteditor-1.0/admin/libtool.m4.in0120777000076400007640000000000007742332225023207 2old-libtool.m4.inustar tasukuhomeuserkdocumenteditor-1.0/admin/ltcf-cxx.sh0120777000076400007640000000000007742332225022531 2old-ltcf-cxx.shustar tasukuhomeuserkdocumenteditor-1.0/admin/ltcf-gcj.sh0120777000076400007640000000000007742332225022433 2old-ltcf-gcj.shustar tasukuhomeuserkdocumenteditor-1.0/admin/ltmain.sh0120777000076400007640000000000007742332225022021 2old-ltmain.shustar tasukuhomeuserkdocumenteditor-1.0/Makefile.cvs0100644000076400007640000000070207735744575016770 0ustar tasukuhomeuserall: @echo "This Makefile is only for the CVS repository" @echo "This will be deleted before making the distribution" @echo "" @if test ! -d admin; then \ echo "Please recheckout this module!" ;\ echo "for cvs: use checkout once and after that update again" ;\ echo "for cvsup: checkout kde-common from cvsup and" ;\ echo " link kde-common/admin to ./admin" ;\ exit 1 ;\ fi $(MAKE) -f admin/Makefile.common cvs .SILENT: kdocumenteditor-1.0/configure.in.in0100644000076400007640000000026407735744562017453 0ustar tasukuhomeuser#MIN_CONFIG AC_HEADER_DIRENT AC_HEADER_STDC AC_CHECK_HEADERS(fcntl.h sys/sysctl.h sys/param.h sys/time.h sys/types.h sys/user.h sys/vmmeter.h sys/resource.h vm/vmparam.h unistd.h) kdocumenteditor-1.0/Makefile.am0100644000076400007640000000202207736743653016564 0ustar tasukuhomeuser## generic Makefile.am ## (C) 1997 Stephan Kulow AUTOMAKE_OPTIONS = foreign 1.4 SUBDIRS = $(TOPSUBDIRS) DISTCLEANFILES = inst-apps install-data-local: @echo "" @echo "" @echo "" @echo "*************** Important *************************" @echo "" @echo " Add "$(bindir)" to your PATH" @echo "" @echo " Please report bugs with our web form at" @echo " http://bugs.kde.org." @echo "" @echo " Stephan Kulow and all the KDE" @echo " developers wish you fun with the KDE." @echo "****************************************************" @echo "" $(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; $(top_srcdir)/subdirs: cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs $(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 SUBDIRS kdocumenteditor-1.0/pics/0040755000076400007640000000000007742332227015461 5ustar tasukuhomeuserkdocumenteditor-1.0/pics/hicolor/0040755000076400007640000000000007742332227017120 5ustar tasukuhomeuserkdocumenteditor-1.0/pics/hicolor/Makefile.am0100644000076400007640000000001607735744575021165 0ustar tasukuhomeuserKDE_ICON=AUTO kdocumenteditor-1.0/pics/hicolor/hi32-app-kdocumenteditor.xpm0100644000076400007640000000231107735744575024400 0ustar tasukuhomeuser/* XPM */ static char *hi32[]={ "32 32 2 1", ". c None", "# c #303030", "................................", "................................", "................................", "......#.........................", "......#.........................", "......#............#............", "......#..........##.............", "......#.........#...............", "......##.......#................", ".......#.....##.................", ".......#....#...................", ".......#..##....................", ".......#.#......................", ".......#.###....................", ".......##..##...................", "......##.....##.................", ".....###........#...............", ".......#..........#.............", ".......#...........##...........", ".......#.............##.........", ".......#..............##........", ".......#...............##.......", ".......##...............##......", "........#.................##....", "................................", "................................", "................................", "................................", "................................", "................................", "................................", "................................"}; kdocumenteditor-1.0/pics/hicolor/hi16-app-kdocumenteditor.xpm0100644000076400007640000000061107735744575024403 0ustar tasukuhomeuser/* XPM */ static char *hi16[]={ "16 16 2 1", ". c None", "# c #000000", "................", "................", "...#............", "...#......#.....", "...#....##......", "...#..##........", "...####.........", "...##.##........", "...#...##.......", "...#....##......", "...#.....##.....", "...#......###...", "...#............", "................", "................", "................"}; kdocumenteditor-1.0/pics/hicolor/Makefile.in0100644000076400007640000002331507742332027021164 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ KDE_ICON = AUTO mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=hi16-app-kdocumenteditor.xpm hi32-app-kdocumenteditor.xpm DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/hicolor/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/hicolor/Makefile cd $(top_srcdir) && perl admin/am_edit pics/hicolor/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status tags: TAGS TAGS: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = pics/hicolor distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu pics/hicolor/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-exec: install-exec-am #>- install-data-am: #>+ 1 install-data-am: install-kde-icons install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am #>- uninstall-am: #>+ 1 uninstall-am: uninstall-kde-icons uninstall: uninstall-am all-am: Makefile all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-generic mostlyclean-am #>- clean: clean-am #>+ 1 clean: kde-rpo-clean clean-am distclean-am: distclean-generic clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: tags distdir info-am info dvi-am dvi check check-am \ installcheck-am installcheck install-exec-am install-exec \ install-data-am install-data install-am install uninstall-am uninstall \ all-redirect all-am all installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 docs-am: #>+ 10 install-kde-icons: $(mkinstalldirs) $(DESTDIR)$(kde_icondir)/hicolor/32x32/apps $(INSTALL_DATA) $(srcdir)/hi32-app-kdocumenteditor.xpm $(DESTDIR)$(kde_icondir)/hicolor/32x32/apps/kdocumenteditor.xpm $(mkinstalldirs) $(DESTDIR)$(kde_icondir)/hicolor/16x16/apps $(INSTALL_DATA) $(srcdir)/hi16-app-kdocumenteditor.xpm $(DESTDIR)$(kde_icondir)/hicolor/16x16/apps/kdocumenteditor.xpm uninstall-kde-icons: -rm -f $(DESTDIR)$(kde_icondir)/hicolor/32x32/apps/kdocumenteditor.xpm -rm -f $(DESTDIR)$(kde_icondir)/hicolor/16x16/apps/kdocumenteditor.xpm #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/hicolor/Makefile cd $(top_srcdir) && perl admin/am_edit pics/hicolor/Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/pics/Makefile.am0100644000076400007640000000002207735744575017523 0ustar tasukuhomeuserSUBDIRS = hicolor kdocumenteditor-1.0/pics/Makefile.in0100644000076400007640000003117107742332027017524 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ SUBDIRS = hicolor mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/Makefile cd $(top_srcdir) && perl admin/am_edit pics/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = pics distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu pics/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am #>- clean: clean-recursive #>+ 1 clean: kde-rpo-clean clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive .PHONY: install-data-recursive uninstall-data-recursive \ install-exec-recursive uninstall-exec-recursive installdirs-recursive \ uninstalldirs-recursive all-recursive check-recursive \ installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu pics/Makefile cd $(top_srcdir) && perl admin/am_edit pics/Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/po/0040755000076400007640000000000007742332227015141 5ustar tasukuhomeuserkdocumenteditor-1.0/po/Makefile.am0100644000076400007640000000001707735747200017173 0ustar tasukuhomeuserPOFILES = AUTO kdocumenteditor-1.0/po/ja.po0100644000076400007640000000371107736743244016102 0ustar tasukuhomeuser# translation of ja.po to Japanese # This file is distributed under the same license as the PACKAGE package. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER. # Suzuki Tasuku , 2003. # msgid "" msgstr "" "Project-Id-Version: ja\n" "POT-Creation-Date: 2003-10-02 15:31+0900\n" "PO-Revision-Date: 2003-10-02 15:33+0900\n" "Last-Translator: Suzuki Tasuku \n" "Language-Team: Japanese\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.0.2\n" #: main.cpp:13 msgid "A Document Text Editor" msgstr "ドキュメントエディタ" #: main.cpp:19 msgid "KDocumentEditor" msgstr "ドキュメントエディタ" #: main.cpp:19 msgid "(c)2003, Tasuku Suzuki" msgstr "(c)2003,　鈴木　佑" #: main.cpp:20 msgid "Tasuku Suzuki" msgstr "鈴木　佑" #: main.cpp:20 msgid "Author" msgstr "作者" #: kdocumenteditor.cpp:49 msgid "&Test" msgstr "テスト(&T)" #: kdocumenteditor.cpp:58 msgid "" "This file is modified\n" "Do you save change?" msgstr "" "ã“ã®ãƒ•ã‚¡ã‚¤ãƒ«ã¯å¤‰æ›´ã•ã‚Œã¦ã„ã¾ã™ã€‚\n" "ä¿å­˜ã—ã¾ã™ã‹ï¼Ÿ" #: kdocumenteditor.cpp:58 msgid "Comfirm" msgstr "確èª" #: kdocumenteditor.cpp:88 kdocumenteditor.cpp:154 msgid "" "*.txt|Text File (*.txt)\n" "*|All files" msgstr "" "*.txt|テキストファイル(*.txt)\n" "*|å…¨ã¦ã®ãƒ•ã‚¡ã‚¤ãƒ«" #: kdocumenteditor.cpp:92 kdocumenteditor.cpp:158 msgid "KDocumentEditor can not handle remote files yet" msgstr "ドキュメントエディタã¯ã¾ã ãƒªãƒ¢ãƒ¼ãƒˆãƒ•ã‚¡ã‚¤ãƒ«ã‚’扱ãˆã¾ã›ã‚“。" #: kdocumenteditor.cpp:101 msgid "KDocumentEditor can not open the file" msgstr "ドキュメントエディタã¯ã“ã®ãƒ•ã‚¡ã‚¤ãƒ«ã‚’é–‹ã‘ã¾ã›ã‚“。" #: kdocumenteditor.cpp:125 msgid "Test done." msgstr "テスト完了" #: kdocumenteditor.cpp:132 msgid "New File" msgstr "æ–°è¦ãƒ•ã‚¡ã‚¤ãƒ«" #: kdocumenteditor.cpp:142 msgid "Can not open file" msgstr "ファイルを開ã‘ã¾ã›ã‚“。" kdocumenteditor-1.0/po/kdocumenteditor.pot0100644000076400007640000000271007736743022021064 0ustar tasukuhomeuser# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "POT-Creation-Date: 2003-10-02 15:31+0900\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: main.cpp:13 msgid "A Document Text Editor" msgstr "" #: main.cpp:19 msgid "KDocumentEditor" msgstr "" #: main.cpp:19 msgid "(c)2003, Tasuku Suzuki" msgstr "" #: main.cpp:20 msgid "Tasuku Suzuki" msgstr "" #: main.cpp:20 msgid "Author" msgstr "" #: kdocumenteditor.cpp:49 msgid "&Test" msgstr "" #: kdocumenteditor.cpp:58 msgid "" "This file is modified\n" "Do you save change?" msgstr "" #: kdocumenteditor.cpp:58 msgid "Comfirm" msgstr "" #: kdocumenteditor.cpp:88 kdocumenteditor.cpp:154 msgid "" "*.txt|Text File (*.txt)\n" "*|All files" msgstr "" #: kdocumenteditor.cpp:92 kdocumenteditor.cpp:158 msgid "KDocumentEditor can not handle remote files yet" msgstr "" #: kdocumenteditor.cpp:101 msgid "KDocumentEditor can not open the file" msgstr "" #: kdocumenteditor.cpp:125 msgid "Test done." msgstr "" #: kdocumenteditor.cpp:132 msgid "New File" msgstr "" #: kdocumenteditor.cpp:142 msgid "Can not open file" msgstr "" kdocumenteditor-1.0/po/Makefile.in0100644000076400007640000002425607742332027017212 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ #>- POFILES = AUTO #>+ 2 POFILES = ja.po GMOFILES = ja.gmo mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=kdocumenteditor.pot ja.po #>- DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) #>+ 1 DISTFILES = $(GMOFILES) $(POFILES) $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: all-nls docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile cd $(top_srcdir) && perl admin/am_edit po/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status tags: TAGS TAGS: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = po #>- distdir: $(DISTFILES) #>+ 1 distdir: distdir-nls $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu po/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-exec: install-exec-am #>- install-data-am: #>+ 1 install-data-am: install-nls install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: #>- uninstall: uninstall-am #>+ 1 uninstall: uninstall-nls uninstall-am all-am: Makefile all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-generic mostlyclean-am #>- clean: clean-am #>+ 1 clean: kde-rpo-clean clean-am distclean-am: distclean-generic clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." #>- maintainer-clean: maintainer-clean-am #>+ 1 maintainer-clean: clean-nls maintainer-clean-am .PHONY: tags distdir info-am info dvi-am dvi check check-am \ installcheck-am installcheck install-exec-am install-exec \ install-data-am install-data install-am install uninstall-am uninstall \ all-redirect all-am all installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 4 ja.gmo: ja.po rm -f ja.gmo; $(GMSGFMT) -o ja.gmo $(srcdir)/ja.po test ! -f ja.gmo || touch ja.gmo #>+ 3 clean-nls: -rm -f ja.gmo #>+ 8 install-nls: @for base in ja ; do \ echo $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$$base/LC_MESSAGES/$(PACKAGE).mo ;\ $(mkinstalldirs) $(DESTDIR)$(kde_locale)/$$base/LC_MESSAGES ; \ test ! -f $$base.gmo || $(INSTALL_DATA) $$base.gmo $(DESTDIR)$(kde_locale)/$$base/LC_MESSAGES/$(PACKAGE).mo ;\ done #>+ 3 uninstall-nls: rm -f $(DESTDIR)$(kde_locale)/ja/LC_MESSAGES/$(PACKAGE).mo #>+ 2 all-nls: $(GMOFILES) #>+ 8 distdir-nls:$(GMOFILES) for file in $(POFILES); do \ cp $(srcdir)/$$file $(distdir); \ done for file in $(GMOFILES); do \ cp $(srcdir)/$$file $(distdir); \ done #>+ 4 merge: $(MAKE) -f $(top_srcdir)/admin/Makefile.common package-merge POFILES="${POFILES}" PACKAGE=${PACKAGE} #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu po/Makefile cd $(top_srcdir) && perl admin/am_edit po/Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/doc/0040755000076400007640000000000007742332227015270 5ustar tasukuhomeuserkdocumenteditor-1.0/doc/Makefile.am0100644000076400007640000000007607736743551017335 0ustar tasukuhomeuserKDE_LANG = ja KDE_DOCS = kdocumenteditor SUBDIRS = $(AUTODIRS)kdocumenteditor-1.0/doc/ja/0040755000076400007640000000000007742332227015662 5ustar tasukuhomeuserkdocumenteditor-1.0/doc/ja/Makefile.am0100644000076400007640000000005107736743542017720 0ustar tasukuhomeuserKDE_LANG = ja KDE_DOCS = kdocumenteditor kdocumenteditor-1.0/doc/ja/index.docbook0100644000076400007640000000505507736740176020346 0ustar tasukuhomeuser ]> The KDocumentEditor Handbook Tasuku Suzuki

tasuku@linux-life.net
2003/10/02 0.1 SHORT DESCRIPTION GOES HERE KDE KDocumentEditor Introduction Features Installation How to obtain kdocumenteditor Requirements Compilation and Installation Compiling kdocumenteditor is very easy.The following should do it: % ./configure % make % make install That should do it! Should you run into any problems, please report them to the author Using kdocumenteditor Questions, Answers, and Tips Frequently asked questions Question 1 The answer kdocumenteditor-1.0/doc/ja/Makefile.in0100644000076400007640000002521207742332027017724 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ KDE_LANG = ja KDE_DOCS = kdocumenteditor mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=index.docbook DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/ja/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/ja/Makefile cd $(top_srcdir) && perl admin/am_edit doc/ja/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status tags: TAGS TAGS: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = doc/ja #>- distdir: $(DISTFILES) #>+ 1 distdir: distdir-nls $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/ja/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-exec: install-exec-am #>- install-data-am: #>+ 1 install-data-am: install-docs install-nls install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: #>- uninstall: uninstall-am #>+ 1 uninstall: uninstall-docs uninstall-nls uninstall-am all-am: Makefile all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-generic mostlyclean: mostlyclean-am #>- clean-am: clean-generic mostlyclean-am #>+ 1 clean-am: clean-docs clean-generic mostlyclean-am #>- clean: clean-am #>+ 1 clean: kde-rpo-clean clean-am distclean-am: distclean-generic clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: tags distdir info-am info dvi-am dvi check check-am \ installcheck-am installcheck install-exec-am install-exec \ install-data-am install-data install-am install uninstall-am uninstall \ all-redirect all-am all installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 21 index.cache.bz2: $(srcdir)/index.docbook $(KDE_XSL_STYLESHEET) index.docbook -@if test -n "$(MEINPROC)"; then echo $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; $(MEINPROC) --check --cache index.cache.bz2 $(srcdir)/index.docbook; fi docs-am: index.cache.bz2 install-docs: docs-am install-nls $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor @if test -f index.cache.bz2; then \ echo $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/; \ $(INSTALL_DATA) index.cache.bz2 $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/; \ fi -rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/common $(LN_S) $(kde_libs_htmldir)/$(KDE_LANG)/common $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/common uninstall-docs: -rm -rf $(kde_htmldir)/$(KDE_LANG)/kdocumenteditor clean-docs: -rm -f index.cache.bz2 #>+ 13 install-nls: $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor @for base in index.docbook ; do \ echo $(INSTALL_DATA) $$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/$$base ;\ $(INSTALL_DATA) $(srcdir)/$$base $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/$$base ;\ done uninstall-nls: for base in index.docbook ; do \ rm -f $(DESTDIR)$(kde_htmldir)/$(KDE_LANG)/kdocumenteditor/$$base ;\ done #>+ 5 distdir-nls: for file in index.docbook ; do \ cp $(srcdir)/$$file $(distdir); \ done #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/ja/Makefile cd $(top_srcdir) && perl admin/am_edit doc/ja/Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/doc/Makefile.in0100644000076400007640000003127007742332027017333 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ KDE_LANG = ja KDE_DOCS = kdocumenteditor #>- SUBDIRS = $(AUTODIRS) #>+ 2 SUBDIRS =. ja mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = doc distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am #>- clean: clean-recursive #>+ 1 clean: kde-rpo-clean clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive .PHONY: install-data-recursive uninstall-data-recursive \ install-exec-recursive uninstall-exec-recursive installdirs-recursive \ uninstalldirs-recursive all-recursive check-recursive \ installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile cd $(top_srcdir) && perl admin/am_edit doc/Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/kdocumenteditor/0040755000076400007640000000000007742332227017723 5ustar tasukuhomeuserkdocumenteditor-1.0/kdocumenteditor/Makefile.am0100644000076400007640000000244007736743042021760 0ustar tasukuhomeuser# X, qt, KDE¤Î¥¤¥ó¥¯¥ë¡¼¥É¥Ñ¥¹ INCLUDES= $(all_includes) # ¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ç¥£¥ì¥¯¥È¥ê¤òµ­½Ò¤¹¤ë # ¥µ¥Ö¥Ç¥£¥ì¥¯¥È¥ê¤¬¤Ê¤±¤ì¤Ð¥³¥á¥ó¥È¥¢¥¦¥È¤¹¤ë # SUBDIRS = # °Ê²¼¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¸ÇÍ­¤ÎÀßÄê # ¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥×¥í¥°¥é¥à bin_PROGRAMS = kdocumenteditor # ¥³¥ó¥Ñ¥¤¥ë¤¹¤Ù¤­¥½¡¼¥¹¥Õ¥¡¥¤¥ë kdocumenteditor_SOURCES = main.cpp kdocumenteditor.cpp kdocumenteditor_METASOURCES = USE_AUTOMOC # ¥é¥¤¥Ö¥é¥ê¥µ¡¼¥Á¥Ñ¥¹ kdocumenteditor_LDFLAGS = $(all_libraries) $(KDE_RPATH) # ¥ê¥ó¥¯¤¹¤Ù¤­¥é¥¤¥Ö¥é¥ê¡£½çÈÖ¤ËÃí°Õ¡£ºÇ½é¤Ë¥é¥¤¥Ö¥é¥ê¤ò»ØÄꤷ¤Ê¤±¤ì¤Ð¤Ê¤é¤Ê¤¤¡£ kdocumenteditor_LDADD = $(LIB_KFILE) # ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï̵»ë¤·¤Æ¤â¤«¤Þ¤ï¤Ê¤¤¡£"make dist"¤¹¤ë¾ì¹ç¤Î¤ßɬÍ× noinst_HEADERS = kdocumenteditor.h # "make distclean"¤ò¼Â¹Ô¤·¤¿¤È¤­¤Ëºï½ü¤µ¤ì¤ë¥Õ¥¡¥¤¥ë¡£ # "make clean"¤ò¼Â¹Ô¤·¤¿¤È¤­¤Ëºï½ü¤µ¤ì¤ë¥Õ¥¡¥¤¥ë¤Ï CLEANFILES ¤Ëµ­½Ò¤¹¤ë DISTCLEANFILES = $(kdocumenteditor_METASOURCES) kdelnkdir = $(kde_appsdir)/Editors kdelnk_DATA = kdocumenteditor.desktop rcdir = $(kde_datadir)/kdocumenteditor rc_DATA = kdocumenteditorui.rc # messages.po¤ÎºîÀ®¡£../po/¤Ë°ÜÆ°¤¹¤ë¡£po¥Ç¥£¥ì¥¯¥È¥ê¤Ç"make merge"¤¹¤ë # -x¥ª¥×¥·¥ç¥ó¤ò»ØÄꤹ¤ì¤Ð¡¢kdelibs¤ÇËÝÌõ¤µ¤ì¤Æ¤¤¤ë¥á¥Ã¥»¡¼¥¸¤ò̵»ë¤¹¤ë¡£ messages: $(XGETTEXT) -C -kdocument -ki18n -kI18N_NOOP -x $(includedir)/kde.pot $(kdocumenteditor_SOURCES) && mv messages.po ../po/kdocumenteditor.pot kdocumenteditor-1.0/kdocumenteditor/main.cpp0100644000076400007640000000167107736633434021364 0ustar tasukuhomeuser#ifdef HAVE_CONFIG_H #include #endif #include #include #include #include #include #include #include "kdocumenteditor.h" static const char* description = I18N_NOOP("A Document Text Editor"); static const char* version = "1.0"; int main( int argc, char* argv[] ) { KAboutData aboutData( "kdocumenteditor", I18N_NOOP("KDocumentEditor"), version, description, KAboutData::License_LGPL, "", I18N_NOOP("(c)2003, Tasuku Suzuki"), "https://linux-life.net/program/cc/kde/doc/kdocumenteditor/", "tasuku@linux-life.net" ); aboutData.addAuthor( I18N_NOOP("Tasuku Suzuki"), I18N_NOOP("Author"), "tasuku@linux-life.net", "https://linux-life.net/" ); KCmdLineArgs::init( argc, argv, &aboutData ); KApplication app; if( app.isRestored() ){ RESTORE( KDocumentEditor ) }else{ KDocumentEditor* mainwidget = new KDocumentEditor(); mainwidget->show(); } app.exec(); } kdocumenteditor-1.0/kdocumenteditor/kdocumenteditor.desktop0100644000076400007640000000060507736633205024517 0ustar tasukuhomeuser[Desktop Entry] Comment=A Document Text Editor Exec=kdocumenteditor -caption "%c" %i %m %f Icon=kdocumenteditor MimeType=plain/text Name=KDocumentEditor Name[ja]=ドキュメントã¤ãエディタ Patterns=*.txt; SwallowExec= SwallowTitle= Terminal=false TerminalOptions= Type=Application X-KDE-AutoEmbed=true X-KDE-SubstituteUID=false X-KDE-Username= DocPath=kdocumenteditor/index.html kdocumenteditor-1.0/kdocumenteditor/kdocumenteditorui.rc0100644000076400007640000000032307736633156024012 0ustar tasukuhomeuser kdocumenteditor-1.0/kdocumenteditor/kdocumenteditor.h0100644000076400007640000000144707736633145023305 0ustar tasukuhomeuser#ifndef __KDOCUMENTEDITOR_H__ #define __KDOCUMENTEDITOR_H__ #ifdef HAVE_CONFIG_H #include #endif #include #include #include #include class KDocumentEditor : public KMainWindow { Q_OBJECT public: KTextEdit* txtEdit; KToolBar* tlbFile; KToolBar* tlbEdit; KDocumentEditor(); ~KDocumentEditor(); void setupAction(); void setupStatusBar(); public slots: void slotFileNew(); void slotFileOpen(); void slotFileSave(); void slotFileSaveAs(); void slotTest(); private: QString GfileName; QString m_startdir; bool CheckChangedAndSaved(); void fileNew(); void fileOpen(); bool fileSave(); bool fileSaveAs(); void readConfig(); void saveConfig(); protected: virtual bool queryClose(); }; #endif /* __KDOCUMENTEDITOR_H__ */ kdocumenteditor-1.0/kdocumenteditor/kdocumenteditor.cpp0100644000076400007640000001050207736633045023627 0ustar tasukuhomeuser#include #include #include #include #include #include #include #include #include #include #include "kdocumenteditor.h" KDocumentEditor::KDocumentEditor() { txtEdit = new KTextEdit( this ); setCentralWidget( txtEdit ); setupAction(); setupStatusBar(); readConfig(); fileNew(); } KDocumentEditor::~KDocumentEditor() { saveConfig(); } void KDocumentEditor::setupStatusBar() { statusBar()->insertItem("", 0, 1, false ); statusBar()->setSizeGripEnabled( true ); statusBar()->show(); } void KDocumentEditor::setupAction() { KStdAction::openNew( this, SLOT( slotFileNew() ), actionCollection() ); KStdAction::open( this, SLOT( slotFileOpen() ), actionCollection() ); KStdAction::save( this, SLOT( slotFileSave() ), actionCollection() ); KStdAction::saveAs( this, SLOT( slotFileSaveAs() ), actionCollection() ); KStdAction::quit( this, SLOT( close() ), actionCollection() ); KStdAction::cut( txtEdit, SLOT( cut() ), actionCollection() ); KStdAction::copy( txtEdit, SLOT( copy() ), actionCollection() ); KStdAction::paste( txtEdit, SLOT( paste() ), actionCollection() ); KStdAction::undo( txtEdit, SLOT( undo() ), actionCollection() ); KStdAction::redo( txtEdit, SLOT( redo() ), actionCollection() ); new KAction( i18n("&Test"), BarIcon("test"), KShortcut(), this, SLOT( slotTest() ), actionCollection(), "test" ); createGUI(); } bool KDocumentEditor::CheckChangedAndSaved() { bool blRtn = true; if( txtEdit->isModified() ){ int ans = KMessageBox::questionYesNoCancel( this, i18n("This file is modified\nDo you save change?"), i18n("Comfirm") ); switch( ans ) { case KMessageBox::Yes: blRtn = fileSave(); break; case KMessageBox::No: break; case KMessageBox::Cancel: blRtn = false; break; } } return blRtn; } void KDocumentEditor::slotFileNew() { if( !CheckChangedAndSaved() ) return; fileNew(); } void KDocumentEditor::slotFileOpen() { if( !CheckChangedAndSaved() ) return; fileOpen(); } void KDocumentEditor::fileOpen() { KURL url = KFileDialog::getOpenURL( m_startdir, i18n("*.txt|Text File (*.txt)\n*|All files") ); if( url.isEmpty() ) return; if( !url.isLocalFile() ){ KMessageBox::sorry( this, i18n("KDocumentEditor can not handle remote files yet") ); return; } m_startdir = url.directory(); GfileName = url.path(); if( !GfileName.isEmpty() ){ QFile file( GfileName ); if ( !file.open( IO_ReadOnly ) ){ KMessageBox::sorry( this, i18n("KDocumentEditor can not open the file") ); return; } QTextStream ts( &file ); QString txt = ts.read(); txtEdit->setText( txt ); txtEdit->viewport()->setFocus(); setCaption( GfileName ); } } void KDocumentEditor::slotFileSave() { if( !GfileName.isEmpty() && !txtEdit->isModified() ) return; fileSave(); } void KDocumentEditor::slotFileSaveAs() { fileSaveAs(); } void KDocumentEditor::slotTest() { kdDebug() << i18n("Test done.") << endl; } void KDocumentEditor::fileNew() { txtEdit->setText( "" ); GfileName = ""; setCaption( i18n("New File") ); } bool KDocumentEditor::fileSave() { if( GfileName.isEmpty() ){ return fileSaveAs(); } QFile file( GfileName ); if ( !file.open( IO_WriteOnly ) ){ KMessageBox::sorry( this, i18n("Can not open file") ); return false; } QTextStream ts( &file ); ts << txtEdit->text(); txtEdit->setModified( false ); return true; } bool KDocumentEditor::fileSaveAs() { bool blRtn = false; KURL url = KFileDialog::getSaveURL( m_startdir, i18n("*.txt|Text File (*.txt)\n*|All files") ); if( url.isEmpty() ) return blRtn; if( !url.isLocalFile() ){ KMessageBox::sorry( this, i18n("KDocumentEditor can not handle remote files yet") ); return blRtn; } m_startdir = url.directory(); GfileName = url.path(); if( !GfileName.isEmpty() ) { blRtn = fileSave(); setCaption( GfileName ); } return blRtn; } void KDocumentEditor::readConfig() { KConfig *conf = KGlobal::config(); conf->setGroup("main"); m_startdir = conf->readEntry( "startdir", QString::null ); applyMainWindowSettings( conf, "window" ); } void KDocumentEditor::saveConfig() { KConfig *conf = KGlobal::config(); conf->setGroup("main"); conf->writeEntry( "startdir", m_startdir ); saveMainWindowSettings( conf, "window" ); } bool KDocumentEditor::queryClose() { return CheckChangedAndSaved(); } kdocumenteditor-1.0/kdocumenteditor/Makefile.in0100644000076400007640000005065207742332027021773 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # X, qt, KDE¤Î¥¤¥ó¥¯¥ë¡¼¥É¥Ñ¥¹ SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ INCLUDES = $(all_includes) # ¥¤¥ó¥¹¥È¡¼¥ë¤·¤¿¤¤¥Ç¥£¥ì¥¯¥È¥ê¤òµ­½Ò¤¹¤ë # ¥µ¥Ö¥Ç¥£¥ì¥¯¥È¥ê¤¬¤Ê¤±¤ì¤Ð¥³¥á¥ó¥È¥¢¥¦¥È¤¹¤ë # SUBDIRS = # °Ê²¼¥¢¥×¥ê¥±¡¼¥·¥ç¥ó¸ÇÍ­¤ÎÀßÄê # ¥¤¥ó¥¹¥È¡¼¥ë¤¹¤ë¥×¥í¥°¥é¥à bin_PROGRAMS = kdocumenteditor # ¥³¥ó¥Ñ¥¤¥ë¤¹¤Ù¤­¥½¡¼¥¹¥Õ¥¡¥¤¥ë kdocumenteditor_SOURCES = main.cpp kdocumenteditor.cpp #>- kdocumenteditor_METASOURCES = USE_AUTOMOC # ¥é¥¤¥Ö¥é¥ê¥µ¡¼¥Á¥Ñ¥¹ kdocumenteditor_LDFLAGS = $(all_libraries) $(KDE_RPATH) # ¥ê¥ó¥¯¤¹¤Ù¤­¥é¥¤¥Ö¥é¥ê¡£½çÈÖ¤ËÃí°Õ¡£ºÇ½é¤Ë¥é¥¤¥Ö¥é¥ê¤ò»ØÄꤷ¤Ê¤±¤ì¤Ð¤Ê¤é¤Ê¤¤¡£ kdocumenteditor_LDADD = $(LIB_KFILE) # ¤³¤Î¥ª¥×¥·¥ç¥ó¤Ï̵»ë¤·¤Æ¤â¤«¤Þ¤ï¤Ê¤¤¡£"make dist"¤¹¤ë¾ì¹ç¤Î¤ßɬÍ× noinst_HEADERS = kdocumenteditor.h # "make distclean"¤ò¼Â¹Ô¤·¤¿¤È¤­¤Ëºï½ü¤µ¤ì¤ë¥Õ¥¡¥¤¥ë¡£ # "make clean"¤ò¼Â¹Ô¤·¤¿¤È¤­¤Ëºï½ü¤µ¤ì¤ë¥Õ¥¡¥¤¥ë¤Ï CLEANFILES ¤Ëµ­½Ò¤¹¤ë DISTCLEANFILES = $(kdocumenteditor_METASOURCES) kdelnkdir = $(kde_appsdir)/Editors kdelnk_DATA = kdocumenteditor.desktop rcdir = $(kde_datadir)/kdocumenteditor rc_DATA = kdocumenteditorui.rc mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = ../config.h CONFIG_CLEAN_FILES = bin_PROGRAMS = kdocumenteditor$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) DEFS = @DEFS@ -I. -I$(srcdir) -I.. CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ #>- kdocumenteditor_OBJECTS = main.$(OBJEXT) kdocumenteditor.$(OBJEXT) #>+ 6 kdocumenteditor_final_OBJECTS = kdocumenteditor.all_cpp.o kdocumenteditor_nofinal_OBJECTS = main.$(OBJEXT) kdocumenteditor.$(OBJEXT)\ kdocumenteditor.moc.o \ kdocumenteditor_meta_unload.o @KDE_USE_FINAL_FALSE@kdocumenteditor_OBJECTS = $(kdocumenteditor_nofinal_OBJECTS) @KDE_USE_FINAL_TRUE@kdocumenteditor_OBJECTS = $(kdocumenteditor_final_OBJECTS) kdocumenteditor_DEPENDENCIES = CXXFLAGS = @CXXFLAGS@ #>- CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) #>+ 1 CXXCOMPILE = $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) #>- LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) #>+ 1 LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) CXXLD = $(CXX) #>- CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(LDFLAGS) -o $@ #>+ 1 CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) $(LDFLAGS) -o $@ DATA = $(kdelnk_DATA) $(rc_DATA) HEADERS = $(noinst_HEADERS) DIST_COMMON = Makefile.am Makefile.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=kdocumenteditor.desktop kdocumenteditorui.rc DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = gtar GZIP_ENV = --best #>- DEP_FILES = .deps/kdocumenteditor.P .deps/main.P #>+ 4 @KDE_USE_FINAL_TRUE@DEP_FILES = $(DEPDIR)/kdocumenteditor.moc.P $(DEPDIR)/kdocumenteditor_meta_unload.P $(DEPDIR)/kdocumenteditor.all_cpp.P \ .deps/kdocumenteditor.P .deps/main.P @KDE_USE_FINAL_FALSE@DEP_FILES = $(DEPDIR)/kdocumenteditor.moc.P $(DEPDIR)/kdocumenteditor_meta_unload.P .deps/kdocumenteditor.P .deps/main.P SOURCES = $(kdocumenteditor_SOURCES) OBJECTS = $(kdocumenteditor_OBJECTS) #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: .SUFFIXES: .S .c .cpp .lo .o .obj .s $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --gnu kdocumenteditor/Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --gnu kdocumenteditor/Makefile cd $(top_srcdir) && perl admin/am_edit kdocumenteditor/Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status mostlyclean-binPROGRAMS: clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) distclean-binPROGRAMS: maintainer-clean-binPROGRAMS: install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ if test -f $$p; then \ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) list='$(bin_PROGRAMS)'; for p in $$list; do \ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ done # FIXME: We should only use cygpath when building on Windows, # and only if it is available. .c.obj: $(COMPILE) -c `cygpath -w $<` .s.o: $(COMPILE) -c $< .S.o: $(COMPILE) -c $< mostlyclean-compile: -rm -f *.o core *.core -rm -f *.$(OBJEXT) clean-compile: distclean-compile: -rm -f *.tab.c maintainer-clean-compile: .s.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< .S.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: maintainer-clean-libtool: kdocumenteditor$(EXEEXT): $(kdocumenteditor_OBJECTS) $(kdocumenteditor_DEPENDENCIES) @rm -f kdocumenteditor$(EXEEXT) $(CXXLINK) $(kdocumenteditor_LDFLAGS) $(kdocumenteditor_OBJECTS) $(kdocumenteditor_LDADD) $(LIBS) .cpp.o: $(CXXCOMPILE) -c $< .cpp.obj: $(CXXCOMPILE) -c `cygpath -w $<` .cpp.lo: $(LTCXXCOMPILE) -c $< install-kdelnkDATA: $(kdelnk_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(kdelnkdir) @list='$(kdelnk_DATA)'; for p in $$list; do \ if test -f $(srcdir)/$$p; then \ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(kdelnkdir)/$$p"; \ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(kdelnkdir)/$$p; \ else if test -f $$p; then \ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(kdelnkdir)/$$p"; \ $(INSTALL_DATA) $$p $(DESTDIR)$(kdelnkdir)/$$p; \ fi; fi; \ done uninstall-kdelnkDATA: @$(NORMAL_UNINSTALL) list='$(kdelnk_DATA)'; for p in $$list; do \ rm -f $(DESTDIR)$(kdelnkdir)/$$p; \ done install-rcDATA: $(rc_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(rcdir) @list='$(rc_DATA)'; for p in $$list; do \ if test -f $(srcdir)/$$p; then \ echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rcdir)/$$p"; \ $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(rcdir)/$$p; \ else if test -f $$p; then \ echo " $(INSTALL_DATA) $$p $(DESTDIR)$(rcdir)/$$p"; \ $(INSTALL_DATA) $$p $(DESTDIR)$(rcdir)/$$p; \ fi; fi; \ done uninstall-rcDATA: @$(NORMAL_UNINSTALL) list='$(rc_DATA)'; for p in $$list; do \ rm -f $(DESTDIR)$(rcdir)/$$p; \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = kdocumenteditor distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu kdocumenteditor/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -include $(DEP_FILES) mostlyclean-depend: clean-depend: distclean-depend: -rm -rf .deps maintainer-clean-depend: %.o: %.c @echo '$(COMPILE) -c $<'; \ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-cp .deps/$(*F).pp .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm .deps/$(*F).pp %.lo: %.c @echo '$(LTCOMPILE) -c $<'; \ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ < .deps/$(*F).pp > .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm -f .deps/$(*F).pp %.o: %.cpp @echo '$(CXXCOMPILE) -c $<'; \ $(CXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-cp .deps/$(*F).pp .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm .deps/$(*F).pp %.lo: %.cpp @echo '$(LTCXXCOMPILE) -c $<'; \ $(LTCXXCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ < .deps/$(*F).pp > .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm -f .deps/$(*F).pp info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-binPROGRAMS install-exec: install-exec-am install-data-am: install-kdelnkDATA install-rcDATA install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: uninstall-binPROGRAMS uninstall-kdelnkDATA \ uninstall-rcDATA uninstall: uninstall-am all-am: Makefile $(PROGRAMS) $(DATA) $(HEADERS) all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(kdelnkdir) \ $(DESTDIR)$(rcdir) mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ mostlyclean-generic mostlyclean: mostlyclean-am #>- clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \ #>- clean-depend clean-generic mostlyclean-am #>+ 2 clean-am: clean-metasources clean-moc-classes clean-final clean-binPROGRAMS clean-compile clean-libtool clean-tags \ clean-depend clean-generic mostlyclean-am #>- clean: clean-am #>+ 1 clean: kde-rpo-clean clean-am distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \ distclean-tags distclean-depend distclean-generic \ clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-binPROGRAMS \ maintainer-clean-compile maintainer-clean-libtool \ maintainer-clean-tags maintainer-clean-depend \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \ maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \ mostlyclean-compile distclean-compile clean-compile \ maintainer-clean-compile mostlyclean-libtool distclean-libtool \ clean-libtool maintainer-clean-libtool uninstall-kdelnkDATA \ install-kdelnkDATA uninstall-rcDATA install-rcDATA tags \ mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \ distdir mostlyclean-depend distclean-depend clean-depend \ maintainer-clean-depend info-am info dvi-am dvi check check-am \ installcheck-am installcheck install-exec-am install-exec \ install-data-am install-data install-am install uninstall-am uninstall \ all-redirect all-am all installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean # messages.po¤ÎºîÀ®¡£../po/¤Ë°ÜÆ°¤¹¤ë¡£po¥Ç¥£¥ì¥¯¥È¥ê¤Ç"make merge"¤¹¤ë # -x¥ª¥×¥·¥ç¥ó¤ò»ØÄꤹ¤ì¤Ð¡¢kdelibs¤ÇËÝÌõ¤µ¤ì¤Æ¤¤¤ë¥á¥Ã¥»¡¼¥¸¤ò̵»ë¤¹¤ë¡£ messages: $(XGETTEXT) -C -kdocument -ki18n -kI18N_NOOP -x $(includedir)/kde.pot $(kdocumenteditor_SOURCES) && mv messages.po ../po/kdocumenteditor.pot # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 3 kdocumenteditor.moc.cpp: $(srcdir)/kdocumenteditor.h $(MOC) $(srcdir)/kdocumenteditor.h -o kdocumenteditor.moc.cpp #>+ 3 clean-metasources: -rm -f kdocumenteditor.moc.cpp #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --gnu kdocumenteditor/Makefile cd $(top_srcdir) && perl admin/am_edit kdocumenteditor/Makefile.in #>+ 12 kdocumenteditor_meta_unload.cpp: kdocumenteditor.moc.cpp @echo 'creating kdocumenteditor_meta_unload.cpp' @-rm -f kdocumenteditor_meta_unload.cpp @if test ${kde_qtver} = 2; then \ echo 'static const char * _metalist_kdocumenteditor[] = {' > kdocumenteditor_meta_unload.cpp ;\ cat kdocumenteditor.moc.cpp | grep 'char.*className' | sed -e 's/.*[^A-Za-z0-9_:]\([A-Za-z0-9_:]*\)::className.*$$/\"\1\",/' | sort | uniq >> kdocumenteditor_meta_unload.cpp ;\ echo '0};' >> kdocumenteditor_meta_unload.cpp ;\ echo '#include ' >> kdocumenteditor_meta_unload.cpp ;\ echo '_UNLOAD(kdocumenteditor)' >> kdocumenteditor_meta_unload.cpp ;\ else echo > kdocumenteditor_meta_unload.cpp; fi #>+ 3 clean-moc-classes: -rm -f kdocumenteditor_meta_unload.cpp #>+ 11 kdocumenteditor.all_cpp.cpp: $(srcdir)/Makefile.in $(srcdir)/main.cpp $(srcdir)/kdocumenteditor.cpp kdocumenteditor_meta_unload.cpp kdocumenteditor.moc.cpp @echo 'creating kdocumenteditor.all_cpp.cpp ...'; \ rm -f kdocumenteditor.all_cpp.files kdocumenteditor.all_cpp.final; \ echo "#define KDE_USE_FINAL 1" >> kdocumenteditor.all_cpp.final; \ for file in main.cpp kdocumenteditor.cpp kdocumenteditor_meta_unload.cpp kdocumenteditor.moc.cpp; do \ echo "#include \"$$file\"" >> kdocumenteditor.all_cpp.files; \ test ! -f $(srcdir)/$$file || egrep '^#pragma +implementation' $(srcdir)/$$file >> kdocumenteditor.all_cpp.final; \ done; \ cat kdocumenteditor.all_cpp.final kdocumenteditor.all_cpp.files > kdocumenteditor.all_cpp.cpp; \ rm -f kdocumenteditor.all_cpp.final kdocumenteditor.all_cpp.files #>+ 3 clean-final: -rm -f kdocumenteditor.all_cpp.cpp #>+ 2 final: $(MAKE) kdocumenteditor_OBJECTS="$(kdocumenteditor_final_OBJECTS)" all-am #>+ 2 final-install: $(MAKE) kdocumenteditor_OBJECTS="$(kdocumenteditor_final_OBJECTS)" install-am #>+ 2 no-final: $(MAKE) kdocumenteditor_OBJECTS="$(kdocumenteditor_nofinal_OBJECTS)" all-am #>+ 2 no-final-install: $(MAKE) kdocumenteditor_OBJECTS="$(kdocumenteditor_nofinal_OBJECTS)" install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo kdocumenteditor-1.0/acinclude.m40100644000076400007640000046471607742332024016726 0ustar tasukuhomeuser## -*- autoconf -*- dnl This file is part of the KDE libraries/packages dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. dnl IMPORTANT NOTE: dnl Please do not modify this file unless you expect your modifications to be dnl carried into every other module in the repository. If you decide that you dnl really want to modify it, contact coolo@kde.org mentioning that you have dnl and that the modified file should be committed to every module. dnl dnl Single-module modifications are best placed in configure.in for kdelibs dnl and kdebase or configure.in.in if present. dnl ------------------------------------------------------------------------ dnl Forward compatibility macros (make autoconf 2.13 look like 2.50), dnl thanks to Raja R Harinath. dnl ------------------------------------------------------------------------ dnl ifdef([_AC_PATH_X_XMKMF],[], [AC_DEFUN([_AC_PATH_X_XMKMF],[AC_PATH_X_XMKMF])]) ifdef([AC_OUTPUT_SUBDIRS],[], [AC_DEFUN([AC_OUTPUT_SUBDIRS],[subdirs=$1; _AC_OUTPUT_SUBDIRS])]) # KDE_PATH_X_DIRECT dnl Internal subroutine of AC_PATH_X. dnl Set ac_x_includes and/or ac_x_libraries. AC_DEFUN(KDE_PATH_X_DIRECT, [if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. AC_TRY_CPP([#include <$x_direct_test_include>], [# We can compile using X headers with no special include directory. ac_x_includes=], [# Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done]) fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" AC_TRY_LINK(, [${x_direct_test_function}()], [LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries=], [LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do dnl Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done]) fi # $ac_x_libraries = NO ]) dnl ------------------------------------------------------------------------ dnl Find a file (or one of more files in a list of dirs) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_FIND_FILE, [ $3=NO for i in $2; do for j in $1; do echo "configure: __oline__: $i/$j" >&AC_FD_CC if test -r "$i/$j"; then echo "taking that" >&AC_FD_CC $3=$i break 2 fi done done ]) dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, dnl if-not-found, test-parameter) AC_DEFUN(KDE_FIND_PATH, [ AC_MSG_CHECKING([for $1]) if test -n "$$2"; then kde_cv_path="$$2"; else kde_cache=`echo $1 | sed 'y%./+-%__p_%'` AC_CACHE_VAL(kde_cv_path_$kde_cache, [ kde_cv_path="NONE" dirs="$3" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/$1"; then if test -n "$5" then evalstr="$dir/$1 $5 2>&1 " if eval $evalstr; then kde_cv_path="$dir/$1" break fi else kde_cv_path="$dir/$1" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" ]) eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then AC_MSG_RESULT(not found) $4 else AC_MSG_RESULT($kde_cv_path) $2=$kde_cv_path fi ]) AC_DEFUN(KDE_MOC_ERROR_MESSAGE, [ AC_MSG_ERROR([No Qt meta object compiler (moc) found! Please check whether you installed Qt correctly. You need to have a running moc binary. configure tried to run $ac_cv_path_moc and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable MOC to the right one before running configure. ]) ]) AC_DEFUN(KDE_UIC_ERROR_MESSAGE, [ AC_MSG_WARN([No Qt ui compiler (uic) found! Please check whether you installed Qt correctly. You need to have a running uic binary. configure tried to run $ac_cv_path_uic and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable UIC to the right one before running configure. ]) ]) AC_DEFUN(KDE_CHECK_UIC_FLAG, [ AC_MSG_CHECKING([whether uic supports -$1 ]) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, [ cat >conftest.ui < EOT ac_uic_testrun="$UIC -$1 $2 conftest.ui >/dev/null" if AC_TRY_EVAL(ac_uic_testrun); then eval "kde_cv_prog_uic_$kde_cache=yes" else eval "kde_cv_prog_uic_$kde_cache=no" fi rm -f conftest* ]) if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then AC_MSG_RESULT([yes]) : $3 else AC_MSG_RESULT([no]) : $4 fi ]) dnl ------------------------------------------------------------------------ dnl Find the meta object compiler and the ui compiler in the PATH, dnl in $QTDIR/bin, and some more usual places dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_MOC_UIC, [ qt_bindirs="" for dir in $kde_qt_dirs; do qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" done qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" if test ! "$ac_qt_bindir" = "NO"; then qt_bindirs="$ac_qt_bindir $qt_bindirs" fi KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) if test -z "$UIC_NOT_NEEDED"; then KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC=""]) if test -z "$UIC" ; then KDE_UIC_ERROR_MESSAGE exit 1 elif test $kde_qtver = 3; then KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) if test x$ac_uic_supports_libpath = xyes; then UIC="$UIC -L \$(kde_widgetdir)" fi if test x$ac_uic_supports_nounload = xyes; then UIC="$UIC -nounload" fi fi else UIC="echo uic not available: " fi AC_SUBST(MOC) AC_SUBST(UIC) UIC_TR="i18n" if test $kde_qtver = 3; then UIC_TR="tr2i18n" fi AC_SUBST(UIC_TR) ]) AC_DEFUN(KDE_1_CHECK_PATHS, [ KDE_1_CHECK_PATH_HEADERS KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi AC_MSG_CHECKING([for KDE libraries installed]) ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if AC_TRY_EVAL(ac_link) && test -s conftest; then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log.]) fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes KDE_SET_PATHS($kde_result) ]) AC_DEFUN(KDE_SET_PATHS, [ kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=$1" ]) AC_DEFUN(KDE_SET_DEFAULT_PATHS, [ if test "$1" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then if test "$kde_qtver" = "2"; then kde_moduledir='\${libdir}/kde2' else kde_moduledir='\${libdir}/kde3' fi fi if test -z "$kde_styledir"; then kde_styledir='\${libdir}/kde3/plugins/styles' fi if test -z "$kde_widgetdir"; then kde_widgetdir='\${libdir}/kde3/plugins/designer' fi KDE_SET_PATHS(defaults) else if test $kde_qtver = 1; then AC_MSG_RESULT([compiling]) KDE_1_CHECK_PATHS else AC_MSG_ERROR([path checking not yet supported for KDE 2]) fi fi ]) AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, [ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test -z "$kde_styledir" || test -z "kde_widgetdir" test "x$kde_have_all_paths" != "xyes"; then kde_have_all_paths=no fi ]) AC_DEFUN(KDE_MISSING_PROG_ERROR, [ AC_MSG_ERROR([The important program $1 was not found! Please check whether you installed KDE correctly. ]) ]) AC_DEFUN(KDE_SUBST_PROGRAMS, [ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" if test -n "$KDEDIRS"; then kde_save_IFS=$IFS IFS=: for dir in $KDEDIRS; do kde_default_bindirs="$dir/bin $kde_default_bindirs " done IFS=$kde_save_IFS fi kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)]) KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)]) KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs]) KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) if test "$KDE_XSL_STYLESHEET" = "NO"; then KDE_XSL_STYLESHEET="" else KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" fi fi DCOP_DEPENDENCIES='$(DCOPIDL)' AC_SUBST(DCOPIDL) AC_SUBST(DCOPIDL2CPP) AC_SUBST(DCOP_DEPENDENCIES) AC_SUBST(MCOPIDL) AC_SUBST(ARTSCCONFIG) AC_SUBST(KDECONFIG) AC_SUBST(MEINPROC) AC_SUBST(KDE_XSL_STYLESHEET) if test -x "$KDECONFIG"; then # it can be "compiled" kde_libs_prefix=`$KDECONFIG --prefix` if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. This means it has been moved since you installed it. This won't work. Please recompile kdelibs for the new prefix. ]) fi kde_libs_htmldir=`$KDECONFIG --install html --expandvars` else kde_libs_prefix='$(prefix)' kde_libs_htmldir='$(kde_htmldir)' fi AC_SUBST(kde_libs_prefix) AC_SUBST(kde_libs_htmldir) ])dnl AC_DEFUN(AC_CREATE_KFSSTND, [ AC_REQUIRE([AC_CHECK_RPATH]) AC_MSG_CHECKING([for KDE paths]) kde_result="" kde_cached_paths=yes AC_CACHE_VAL(kde_cv_all_paths, [ KDE_SET_DEFAULT_PATHS($1) kde_cached_paths=no ]) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then # wrong values were cached, may be, we can set better ones kde_result= kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= kde_have_all_paths= kde_styledir= kde_widgetdir= KDE_SET_DEFAULT_PATHS($1) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS kde_result="$kde_result (cache overridden)" fi if test "$kde_have_all_paths" = "no"; then AC_MSG_ERROR([configure could not run a little KDE program to test the environment. Since it had compiled and linked before, it must be a strange problem on your system. Look at config.log for details. If you are not able to fix this, look at http://www.kde.org/faq/installation.html or any www.kde.org mirror. (If you're using an egcs version on Linux, you may update binutils!) ]) else rm -f conftest* AC_MSG_RESULT($kde_result) fi bindir=$kde_bindir KDE_SUBST_PROGRAMS ]) AC_DEFUN(AC_SUBST_KFSSTND, [ AC_SUBST(kde_htmldir) AC_SUBST(kde_appsdir) AC_SUBST(kde_icondir) AC_SUBST(kde_sounddir) AC_SUBST(kde_datadir) AC_SUBST(kde_locale) AC_SUBST(kde_confdir) AC_SUBST(kde_mimedir) AC_SUBST(kde_wallpaperdir) AC_SUBST(kde_bindir) dnl for KDE 2 AC_SUBST(kde_templatesdir) AC_SUBST(kde_servicesdir) AC_SUBST(kde_servicetypesdir) AC_SUBST(kde_moduledir) AC_SUBST(kde_styledir) AC_SUBST(kde_widgetdir) if test "$kde_qtver" = 1; then kde_minidir="$kde_icondir/mini" else # for KDE 1 - this breaks KDE2 apps using minidir, but # that's the plan ;-/ kde_minidir="/dev/null" fi dnl AC_SUBST(kde_minidir) dnl AC_SUBST(kde_cgidir) dnl AC_SUBST(kde_toolbardir) ]) AC_DEFUN(KDE_MISC_TESTS, [ AC_LANG_C dnl Checks for libraries. AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD AC_SUBST(LIBUTIL) AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD AC_SUBST(LIBCOMPAT) kde_have_crypt= AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ AC_MSG_WARN([you have no crypt in either libcrypt or libc. You should install libcrypt from another source or configure with PAM support]) kde_have_crypt=no ])) AC_SUBST(LIBCRYPT) if test $kde_have_crypt = yes; then AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) fi AC_CHECK_SOCKLEN_T AC_LANG_C AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) if test $ac_cv_lib_dnet_dnet_ntoa = no; then AC_CHECK_LIB(dnet_stub, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) fi AC_CHECK_FUNC(inet_ntoa) if test $ac_cv_func_inet_ntoa = no; then AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") fi AC_CHECK_FUNC(connect) if test $ac_cv_func_connect = no; then AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , $X_EXTRA_LIBS) fi AC_CHECK_FUNC(remove) if test $ac_cv_func_remove = no; then AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. AC_CHECK_FUNC(shmat, , AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) # Solaris 2.6 and others need -lresolv for res_init AC_CHECK_FUNCS(res_init, , [ kde_libs_safe="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS -lresolv" AC_TRY_LINK( [ #include ], [ res_init(); ], LIBRESOLV="-lresolv" X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV" AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) ) LIBS=$kde_libs_safe ]) LIBSOCKET="$X_EXTRA_LIBS" AC_SUBST(LIBSOCKET) AC_SUBST(LIBRESOLV) AC_SUBST(X_EXTRA_LIBS) AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 AC_SUBST(LIBUCB) case $host in dnl this *is* LynxOS specific *-*-lynxos* ) AC_MSG_CHECKING([LynxOS header file wrappers]) [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] AC_MSG_RESULT(disabled) AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS ;; esac KDE_CHECK_TYPES KDE_CHECK_LIBDL ]) dnl ------------------------------------------------------------------------ dnl Find the header files and libraries for X-Windows. Extended the dnl macro AC_PATH_X dnl ------------------------------------------------------------------------ dnl AC_DEFUN(K_PATH_X, [ AC_REQUIRE([KDE_MISC_TESTS])dnl AC_ARG_ENABLE( embedded, [ --enable-embedded link to Qt-embedded, don't use X], kde_use_qt_emb=$enableval, kde_use_qt_emb=no ) AC_ARG_ENABLE( qtopia, [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], kde_use_qt_emb_palm=$enableval, kde_use_qt_emb_palm=no ) if test "$kde_use_qt_emb" = "no"; then AC_MSG_CHECKING(for X) AC_LANG_SAVE AC_LANG_C AC_CACHE_VAL(kde_cv_have_x, [# One or both of the vars are not set, and there is no cached value. if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then kde_x_includes=NO else kde_x_includes=$x_includes fi if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then kde_x_libraries=NO else kde_x_libraries=$x_libraries fi # below we use the standard autoconf calls ac_x_libraries=$kde_x_libraries ac_x_includes=$kde_x_includes KDE_PATH_X_DIRECT dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. dnl Unfortunately, if compiling with the N32 ABI, this is not the correct dnl location. The correct location is /usr/lib32 or an undefined value dnl (the linker is smart enough to pick the correct default library). dnl Things work just fine if you use just AC_PATH_X_DIRECT. dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to dnl /usr/openwin/include, which doesn't work. /usr/include does work, so dnl x_includes should be left alone. case "$host" in mips-sgi-irix6*) ;; *-*-solaris*) ;; *) _AC_PATH_X_XMKMF if test -z "$ac_x_includes"; then ac_x_includes="." fi if test -z "$ac_x_libraries"; then ac_x_libraries="/usr/lib" fi esac #from now on we use our own again # when the user already gave --x-includes, we ignore # what the standard autoconf macros told us. if test "$kde_x_includes" = NO; then kde_x_includes=$ac_x_includes fi # for --x-libraries too if test "$kde_x_libraries" = NO; then kde_x_libraries=$ac_x_libraries fi if test "$kde_x_includes" = NO; then AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) fi if test "$kde_x_libraries" = NO; then AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) fi # Record where we found X for the cache. kde_cv_have_x="have_x=yes \ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" ])dnl eval "$kde_cv_have_x" if test "$have_x" != yes; then AC_MSG_RESULT($have_x) no_x=yes else AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) fi if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then X_INCLUDES="" x_includes="."; dnl better than nothing :- else x_includes=$kde_x_includes X_INCLUDES="-I$x_includes" fi if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then X_LDFLAGS="" x_libraries="/usr/lib"; dnl better than nothing :- else x_libraries=$kde_x_libraries X_LDFLAGS="-L$x_libraries" fi all_includes="$X_INCLUDES" all_libraries="$X_LDFLAGS" AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_libraries) AC_SUBST(x_includes) # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $X_LDFLAGS" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. AC_CHECK_LIB(ICE, IceConnectionNumber, [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) AC_SUBST(LIBSM) LDFLAGS="$ac_save_LDFLAGS" AC_SUBST(X_PRE_LIBS) LIB_X11='-lX11 $(LIBSOCKET)' AC_SUBST(LIB_X11) AC_MSG_CHECKING(for libXext) AC_CACHE_VAL(kde_cv_have_libXext, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" LIBS="-lXext -lX11 $LIBSOCKET" AC_TRY_LINK([ #include #ifdef STDC_HEADERS # include #endif ], [ printf("hello Xext\n"); ], kde_cv_have_libXext=yes, kde_cv_have_libXext=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe ]) AC_MSG_RESULT($kde_cv_have_libXext) if test "$kde_cv_have_libXext" = "no"; then AC_MSG_ERROR([We need a working libXext to proceed. Since configure can't find it itself, we stop here assuming that make wouldn't find them either.]) fi AC_MSG_CHECKING(for Xinerama) AC_ARG_WITH(xinerama, [ --with-xinerama enable support for Xinerama ], [ no_xinerama=no ], [ no_xinerama=yes ] ) kde_save_LDFLAGS="$LDFLAGS" kde_save_CFLAGS="$CFLAGS" kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" CFLAGS="$CFLAGS -I$x_includes" LIBS="-lXinerama -lXext" if test "x$no_xinerama" = "xno"; then AC_CACHE_VAL(ac_cv_have_xinerama, [ AC_TRY_LINK([#include #include ], [XineramaIsActive(NULL);], [ac_cv_have_xinerama="yes"], [ac_cv_have_xinerama="no"]) ]) else ac_cv_have_xinerama=no; fi AC_MSG_RESULT($ac_cv_have_xinerama) LIBXINERAMA="" if test "$ac_cv_have_xinerama" = "yes"; then AC_DEFINE(HAVE_XINERAMA, 1, [Define if you want Xinerama support]) LIBXINERAMA="-lXinerama" fi AC_SUBST(LIBXINERAMA) LDFLAGS="$kde_save_LDFLAGS" CFLAGS="$kde_save_CFLAGS" LIBS="$kde_save_LIBS" LIB_XEXT="-lXext" QTE_NORTTI="" else dnl We're using QT Embedded CXXFLAGS="$CXXFLAGS -fno-rtti -DQWS" CFLAGS="$CFLAGS -DQWS" LDFLAGS="$LDFLAGS -DQWS" QTE_NORTTI="-fno-rtti -DQWS" X_PRE_LIBS="" LIB_X11="" LIB_XEXT="" LIBSM="" X_INCLUDES="" X_LDFLAGS="" x_includes="" x_libraries="" AC_SUBST(X_PRE_LIBS) AC_SUBST(LIB_X11) AC_SUBST(LIBSM) AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_includes) AC_SUBST(x_libraries) fi AC_SUBST(QTE_NORTTI) AC_SUBST(LIB_XEXT) AC_LANG_RESTORE ]) AC_DEFUN(KDE_PRINT_QT_PROGRAM, [ AC_REQUIRE([KDE_USE_QT]) cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi if test "$kde_qtver" = "3"; then cat >> conftest.$ac_ext < #include #include EOF fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" export LD_LIBRARY_PATH LIBRARY_PATH="$ac_LIBRARY_PATH" export LIBRARY_PATH AC_LANG_RESTORE ]) if test "$kde_cv_qt_direct" = "yes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) dnl ------------------------------------------------------------------------ dnl Try to find the Qt headers and libraries. dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_1_3, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([KDE_USE_QT]) dnl ------------------------------------------------------------------------ dnl Add configure flag to enable linking to MT version of Qt library. dnl ------------------------------------------------------------------------ AC_ARG_ENABLE( mt, [ --disable-mt link to non-threaded Qt (deprecated)], kde_use_qt_mt=$enableval, [ if test $kde_qtver = 3; then kde_use_qt_mt=yes else kde_use_qt_mt=no fi ] ) USING_QT_MT="" dnl ------------------------------------------------------------------------ dnl If we not get --disable-qt-mt then adjust some vars for the host. dnl ------------------------------------------------------------------------ KDE_MT_LDFLAGS= KDE_MT_LIBS= if test "x$kde_use_qt_mt" = "xyes"; then KDE_CHECK_THREADING if test "x$kde_use_threading" = "xyes"; then CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" KDE_MT_LDFLAGS="$USE_THREADS" KDE_MT_LIBS="$LIBPTHREAD" else kde_use_qt_mt=no fi fi AC_SUBST(KDE_MT_LDFLAGS) AC_SUBST(KDE_MT_LIBS) kde_qt_was_given=yes dnl ------------------------------------------------------------------------ dnl If we haven't been told how to link to Qt, we work it out for ourselves. dnl ------------------------------------------------------------------------ if test -z "$LIBQT_GLOB"; then if test "x$kde_use_qt_emb" = "xyes"; then LIBQT_GLOB="libqte.*" else LIBQT_GLOB="libqt.*" fi fi if test -z "$LIBQT"; then dnl ------------------------------------------------------------ dnl If we got --enable-embedded then adjust the Qt library name. dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then qtlib="qte" else qtlib="qt" fi kde_int_qt="-l$qtlib" else kde_int_qt="$LIBQT" kde_lib_qt_set=yes fi if test -z "$LIBQPE"; then dnl ------------------------------------------------------------ dnl If we got --enable-palmtop then add -lqpe to the link line dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then if test "x$kde_use_qt_emb_palm" = "xyes"; then LIB_QPE="-lqpe" else LIB_QPE="" fi else LIB_QPE="" fi fi dnl ------------------------------------------------------------------------ dnl If we got --enable-qt-mt then adjust the Qt library name for the host. dnl ------------------------------------------------------------------------ if test "x$kde_use_qt_mt" = "xyes"; then if test -z "$LIBQT"; then LIBQT="-l$qtlib-mt" kde_int_qt="-l$qtlib-mt" else LIBQT="$qtlib-mt" kde_int_qt="$qtlib-mt" fi LIBQT_GLOB="lib$qtlib-mt.*" USING_QT_MT="using -mt" else LIBQT="-l$qtlib" fi if test $kde_qtver != 1; then AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([AC_FIND_JPEG]) LIBQT="$LIBQT $LIBPNG $LIBJPEG" fi if test $kde_qtver = 3; then AC_REQUIRE([KDE_CHECK_LIBDL]) LIBQT="$LIBQT $LIBDL" fi AC_MSG_CHECKING([for Qt]) if test "x$kde_use_qt_emb" != "xyes"; then LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" fi ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO qt_libraries="" qt_includes="" AC_ARG_WITH(qt-dir, [ --with-qt-dir=DIR where the root of Qt is installed ], [ ac_qt_includes="$withval"/include ac_qt_libraries="$withval"/lib ac_qt_bindir="$withval"/bin ]) AC_ARG_WITH(qt-includes, [ --with-qt-includes=DIR where the Qt includes are. ], [ ac_qt_includes="$withval" ]) kde_qt_libs_given=no AC_ARG_WITH(qt-libraries, [ --with-qt-libraries=DIR where the Qt library is installed.], [ ac_qt_libraries="$withval" kde_qt_libs_given=yes ]) AC_CACHE_VAL(ac_cv_have_qt, [#try to guess Qt locations qt_incdirs="" for dir in $kde_qt_dirs; do qt_incdirs="$qt_incdirs $dir/include $dir" done qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes" if test ! "$ac_qt_includes" = "NO"; then qt_incdirs="$ac_qt_includes $qt_incdirs" fi if test "$kde_qtver" != "1"; then kde_qt_header=qstyle.h else kde_qt_header=qglobal.h fi AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) ac_qt_includes="$qt_incdir" qt_libdirs="" for dir in $kde_qt_dirs; do qt_libdirs="$qt_libdirs $dir/lib $dir" done qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" if test ! "$ac_qt_libraries" = "NO"; then qt_libdir=$ac_qt_libraries else qt_libdirs="$ac_qt_libraries $qt_libdirs" # if the Qt was given, the chance is too big that libqt.* doesn't exist qt_libdir=NONE for dir in $qt_libdirs; do try="ls -1 $dir/${LIBQT_GLOB}" if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi done fi ac_qt_libraries="$qt_libdir" AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIBQT $KDE_MT_LIBS" KDE_PRINT_QT_PROGRAM if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else echo "configure: failed program was:" >&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC ac_qt_libraries="NO" fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then ac_cv_have_qt="have_qt=no" ac_qt_notfound="" missing_qt_mt="" if test "$ac_qt_includes" = NO; then if test "$ac_qt_libraries" = NO; then ac_qt_notfound="(headers and libraries)"; else ac_qt_notfound="(headers)"; fi else if test "x$kde_use_qt_mt" = "xyes"; then missing_qt_mt=" Make sure that you have compiled Qt with thread support!" ac_qt_notfound="(library $qtlib-mt)"; else ac_qt_notfound="(library $qtlib)"; fi fi AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! For more details about this problem, look at the end of config.log.$missing_qt_mt]) else have_qt="yes" fi ]) eval "$ac_cv_have_qt" if test "$have_qt" != yes; then AC_MSG_RESULT([$have_qt]); else ac_cv_have_qt="have_qt=yes \ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) qt_libraries="$ac_qt_libraries" qt_includes="$ac_qt_includes" fi if test ! "$kde_qt_libs_given" = "yes"; then KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) fi AC_SUBST(qt_libraries) AC_SUBST(qt_includes) if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then QT_INCLUDES="" else QT_INCLUDES="-I$qt_includes" all_includes="$QT_INCLUDES $all_includes" fi if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then QT_LDFLAGS="" else QT_LDFLAGS="-L$qt_libraries" all_libraries="$all_libraries $QT_LDFLAGS" fi test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" AC_SUBST(QT_INCLUDES) AC_SUBST(QT_LDFLAGS) AC_PATH_QT_MOC_UIC KDE_CHECK_QT_JPEG if test "x$kde_use_qt_emb" != "xyes"; then LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' else LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' fi test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" AC_SUBST(LIB_QT) AC_SUBST(LIB_QPE) AC_SUBST(kde_qtver) ]) AC_DEFUN(AC_PATH_QT, [ AC_PATH_QT_1_3 ]) AC_DEFUN(KDE_CHECK_FINAL, [ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], kde_use_final=$enableval, kde_use_final=no) KDE_COMPILER_REPO if test "x$kde_use_final" = "xyes"; then KDE_USE_FINAL_TRUE="" KDE_USE_FINAL_FALSE="#" else KDE_USE_FINAL_TRUE="#" KDE_USE_FINAL_FALSE="" fi AC_SUBST(KDE_USE_FINAL_TRUE) AC_SUBST(KDE_USE_FINAL_FALSE) AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], kde_use_closure=$enableval, kde_use_closure=yes) if test "x$kde_use_closure" = "xyes"; then KDE_USE_CLOSURE_TRUE="" KDE_USE_CLOSURE_FALSE="#" # CXXFLAGS="$CXXFLAGS $REPO" else KDE_USE_CLOSURE_TRUE="#" KDE_USE_CLOSURE_FALSE="" fi AC_SUBST(KDE_USE_CLOSURE_TRUE) AC_SUBST(KDE_USE_CLOSURE_FALSE) ]) dnl ------------------------------------------------------------------------ dnl Now, the same with KDE dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) dnl and $(kde_includes) will be the kdehdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_BASE_PATH_KDE, [ AC_PREREQ([2.13]) AC_REQUIRE([AC_PATH_QT])dnl AC_CHECK_RPATH AC_MSG_CHECKING([for KDE]) if test "${prefix}" != NONE; then kde_includes=${prefix}/include ac_kde_includes=$prefix/include if test "${exec_prefix}" != NONE; then kde_libraries=${libdir} ac_kde_libraries=$libdir else kde_libraries=${prefix}/lib ac_kde_libraries=$prefix/lib fi else ac_kde_includes= ac_kde_libraries= kde_libraries="" kde_includes="" fi AC_CACHE_VAL(ac_cv_have_kde, [#try to guess kde locations if test "$kde_qtver" = 1; then kde_check_header="ksock.h" kde_check_lib="libkdecore.la" else kde_check_header="ksharedptr.h" kde_check_lib="libkio.la" fi if test -z "$1"; then kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes $includedir" test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" kde_incdirs="$ac_kde_includes $kde_incdirs" AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) ac_kde_includes="$kde_incdir" if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix!]) fi kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib" test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs" kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) ac_kde_libraries="$kde_libdir" if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE libraries installed. This will fail. So, check this please and use another prefix!]) fi ac_kde_libraries="$kde_libdir" if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then ac_cv_have_kde="have_kde=no" else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" fi else dnl test -z $1 ac_cv_have_kde="have_kde=no" fi ])dnl eval "$ac_cv_have_kde" if test "$have_kde" != "yes"; then if test "${prefix}" = NONE; then ac_kde_prefix="$ac_default_prefix" else ac_kde_prefix="$prefix" fi if test "$exec_prefix" = NONE; then ac_kde_exec_prefix="$ac_kde_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix]) else ac_kde_exec_prefix="$exec_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) fi kde_libraries="${libdir}" kde_includes=${ac_kde_prefix}/include else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) kde_libraries="$ac_kde_libraries" kde_includes="$ac_kde_includes" fi AC_SUBST(kde_libraries) AC_SUBST(kde_includes) if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then KDE_INCLUDES="" else KDE_INCLUDES="-I$kde_includes" all_includes="$KDE_INCLUDES $all_includes" fi KDE_LDFLAGS="-L$kde_libraries" if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then all_libraries="$all_libraries $KDE_LDFLAGS" fi AC_SUBST(KDE_LDFLAGS) AC_SUBST(KDE_INCLUDES) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) all_libraries="$all_libraries $USER_LDFLAGS" all_includes="$all_includes $USER_INCLUDES" AC_SUBST(all_includes) AC_SUBST(all_libraries) AC_SUBST(AUTODIRS) ]) AC_DEFUN(KDE_CHECK_EXTRA_LIBS, [ AC_MSG_CHECKING(for extra includes) AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR adds non standard include paths], kde_use_extra_includes="$withval", kde_use_extra_includes=NONE ) kde_extra_includes= if test -n "$kde_use_extra_includes" && \ test "$kde_use_extra_includes" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_includes; do kde_extra_includes="$kde_extra_includes $dir" USER_INCLUDES="$USER_INCLUDES -I$dir" done IFS=$ac_save_ifs kde_use_extra_includes="added" else kde_use_extra_includes="no" fi AC_SUBST(USER_INCLUDES) AC_MSG_RESULT($kde_use_extra_includes) kde_extra_libs= AC_MSG_CHECKING(for extra libs) AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], kde_use_extra_libs=$withval, kde_use_extra_libs=NONE ) if test -n "$kde_use_extra_libs" && \ test "$kde_use_extra_libs" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_libs; do kde_extra_libs="$kde_extra_libs $dir" KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" USER_LDFLAGS="$USER_LDFLAGS -L$dir" done IFS=$ac_save_ifs kde_use_extra_libs="added" else kde_use_extra_libs="no" fi AC_SUBST(USER_LDFLAGS) AC_MSG_RESULT($kde_use_extra_libs) ]) AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, [ AC_MSG_CHECKING([for KDE headers installed]) AC_LANG_SAVE AC_LANG_CPLUSPLUS cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); printf("kde_styledir=\\"/tmp/dummy\\"\n"); printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if AC_TRY_EVAL(ac_compile); then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log.]) fi AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_KDEQTADDON, [ AC_MSG_CHECKING(for kde-qt-addon) AC_CACHE_VAL(kde_cv_have_kdeqtaddon, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" kde_cxxflags_safe="$CXXFLAGS" LIBS="-lkde-qt-addon $LIBQT $LIBS" CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" AC_TRY_LINK([ #include ], [ QDomDocument doc; ], kde_cv_have_kdeqtaddon=yes, kde_cv_have_kdeqtaddon=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe CXXFLAGS=$kde_cxxflags_safe ]) AC_MSG_RESULT($kde_cv_have_kdeqtaddon) if test "$kde_cv_have_kdeqtaddon" = "no"; then AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. It is a separate package (and CVS module) named kde-qt-addon.]) fi ]) AC_DEFUN(KDE_CHECK_KIMGIO, [ AC_REQUIRE([AC_BASE_PATH_KDE]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_TIFF]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) if test "$1" = "existance"; then AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" AC_CHECK_LIB(kimgio, kimgioRegister, [ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) LIBS="$kde_save_LIBS" AC_LANG_RESTORE else LIBKIMGIO_EXISTS=yes fi if test "$LIBKIMGIO_EXISTS" = "yes"; then LIB_KIMGIO='-lkimgio' else LIB_KIMGIO='' fi AC_SUBST(LIB_KIMGIO) ]) AC_DEFUN(KDE_CREATE_LIBS_ALIASES, [ AC_REQUIRE([KDE_MISC_TESTS]) AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([K_PATH_X]) if test $kde_qtver = 3; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) # these are for backward compatibility LIB_KSYCOCA='-lkio' AC_SUBST(LIB_KSYCOCA) LIB_KFILE='-lkio' AC_SUBST(LIB_KFILE) elif test $kde_qtver = 2; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_KSYCOCA='-lksycoca' AC_SUBST(LIB_KSYCOCA) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KFILE='-lkfile' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) else LIB_KDECORE='-lkdecore -lXext $(LIB_QT)' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui $(LIB_KDECORE)' AC_SUBST(LIB_KDEUI) LIB_KFM='-lkfm $(LIB_KDECORE)' AC_SUBST(LIB_KFM) LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)' AC_SUBST(LIB_KAB) fi ]) AC_DEFUN(AC_PATH_KDE, [ AC_BASE_PATH_KDE AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], [ if test "$enableval" = "no"; then ac_use_path_checking="default" else ac_use_path_checking="" fi ], [ if test "$kde_qtver" = 1; then ac_use_path_checking="" else ac_use_path_checking="default" fi ] ) AC_CREATE_KFSSTND($ac_use_path_checking) AC_SUBST_KFSSTND KDE_CREATE_LIBS_ALIASES ]) dnl obsolete AC_DEFUN(AC_CHECK_SETENV, [ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl AC_CHECK_FUNCS([setenv unsetenv]) ]) AC_DEFUN(AC_CHECK_GETDOMAINNAME, [ AC_MSG_CHECKING(for getdomainname) AC_CACHE_VAL(ac_cv_func_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" kde_safe_LIBS="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_COMPILE([ #include #include ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes, ac_cv_func_getdomainname=no) CXXFLAGS="$save_CXXFLAGS" LIBS=$kde_safe_LIBS AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_getdomainname) AC_MSG_CHECKING([if getdomainname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then ac_cv_proto_getdomainname=no else kde_safe_libs=$LIBS LIBS="$LIBS $X_EXTRA_LIBS" AC_TRY_LINK([ #include #include extern "C" int getdomainname (char *, int); ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes ac_cv_proto_getdomainname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR([getdomainname unavailable])) fi LIBS=$kde_safe_libs AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_getdomainname) if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname]) fi if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1, [Define if you have getdomainname prototype]) fi ]) AC_DEFUN(AC_CHECK_GETHOSTNAME, [ AC_MSG_CHECKING([for gethostname]) AC_CACHE_VAL(ac_cv_func_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_LINK([ #include #include ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes, ac_cv_func_gethostname=no) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_gethostname) AC_MSG_CHECKING([if gethostname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then ac_cv_proto_gethostname=no else AC_TRY_LINK([ #include #include extern "C" int gethostname (char *, int); ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes ac_cv_proto_gethostname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR(gethostname unavailable)) fi AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_gethostname) if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1, [Define if you have gethostname prototype]) fi if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have gethostname]) fi ]) AC_DEFUN(AC_CHECK_USLEEP, [ AC_MSG_CHECKING([for usleep]) AC_CACHE_VAL(ac_cv_func_usleep, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include #include ], [ usleep(200); ], ac_cv_func_usleep=yes, ac_cv_func_usleep=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_usleep) if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function]) fi ]) AC_DEFUN(AC_CHECK_RANDOM, [ AC_MSG_CHECKING([for random]) AC_CACHE_VAL(ac_cv_func_random, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include ], [ random(); ], ac_cv_func_random=yes, ac_cv_func_random=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_random) if eval "test \"`echo $ac_cv_func_random`\" = yes"; then AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random]) fi ]) AC_DEFUN(AC_FIND_GIF, [AC_MSG_CHECKING([for giflib]) AC_CACHE_VAL(ac_cv_lib_gif, [ac_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" else LIBS="$all_libraries -lgif" fi AC_TRY_LINK(dnl [ #ifdef __cplusplus extern "C" { #endif int GifLastError(void); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [return GifLastError();], eval "ac_cv_lib_gif=yes", eval "ac_cv_lib_gif=no") LIBS="$ac_save_LIBS" ])dnl if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) else AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) fi ]) AC_DEFUN(KDE_FIND_JPEG_HELPER, [ AC_MSG_CHECKING([for libjpeg$2]) AC_CACHE_VAL(ac_cv_lib_jpeg_$1, [ AC_LANG_C ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [/* Override any gcc2 internal prototype to avoid an error. */ struct jpeg_decompress_struct; typedef struct jpeg_decompress_struct * j_decompress_ptr; typedef int size_t; #ifdef __cplusplus extern "C" { #endif void jpeg_CreateDecompress(j_decompress_ptr cinfo, int version, size_t structsize); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [jpeg_CreateDecompress(0L, 0, 0);], eval "ac_cv_lib_jpeg_$1=-ljpeg$2", eval "ac_cv_lib_jpeg_$1=no") LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" ]) if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_$1" AC_MSG_RESULT($ac_cv_lib_jpeg_$1) else AC_MSG_RESULT(no) $3 fi ]) AC_DEFUN(AC_FIND_JPEG, [ dnl first look for libraries KDE_FIND_JPEG_HELPER(6b, 6b, KDE_FIND_JPEG_HELPER(normal, [], [ LIBJPEG= ] ) ) dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h dnl requires system dependent includes loaded before it) jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes" AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) test "x$jpeg_incdir" = xNO && jpeg_incdir= dnl if headers _and_ libraries are missing, this is no error, and we dnl continue with a warning (the user will get no jpeg support in khtml) dnl if only one is missing, it means a configuration error, but we still dnl only warn if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) else if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then AC_MSG_WARN([ There is an installation error in jpeg support. You seem to have only one of either the headers _or_ the libraries installed. You may need to either provide correct --with-extra-... options, or the development package of libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ Disabling JPEG support. ]) else AC_MSG_WARN([libjpeg not found. disable JPEG support.]) fi jpeg_incdir= LIBJPEG= fi AC_SUBST(LIBJPEG) ]) AC_DEFUN(KDE_CHECK_QT_JPEG, [ AC_MSG_CHECKING([if Qt needs $LIBJPEG]) AC_CACHE_VAL(kde_cv_qt_jpeg, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS $LIBQT" LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [#include ], [ int argc; char** argv; QApplication app(argc, argv);], eval "kde_cv_qt_jpeg=no", eval "kde_cv_qt_jpeg=yes") LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then AC_MSG_RESULT(yes) LIBJPEG_QT='$(LIBJPEG)' else AC_MSG_RESULT(no) LIBJPEG_QT= fi ]) AC_DEFUN(AC_FIND_ZLIB, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for libz]) AC_CACHE_VAL(ac_cv_lib_z, [ AC_LANG_C kde_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (zlibVersion() == ZLIB_VERSION); ], eval "ac_cv_lib_z='-lz'", eval "ac_cv_lib_z=no") LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if test ! "$ac_cv_lib_z" = no; then AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) LIBZ="$ac_cv_lib_z" AC_SUBST(LIBZ) AC_MSG_RESULT($ac_cv_lib_z) else AC_MSG_ERROR(not found. Check your installation and look into config.log) LIBZ="" AC_SUBST(LIBZ) fi ]) AC_DEFUN(KDE_TRY_TIFFLIB, [ AC_MSG_CHECKING([for libtiff $1]) AC_CACHE_VAL(kde_cv_libtiff_$1, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" else LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" fi kde_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (TIFFOpen( "", "r") == 0); ], [ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" ], [ kde_cv_libtiff_$1=no ]) LIBS="$kde_save_LIBS" CXXFLAGS="$kde_save_CXXFLAGS" AC_LANG_RESTORE ]) if test "$kde_cv_libtiff_$1" = "no"; then AC_MSG_RESULT(no) LIBTIFF="" $3 else LIBTIFF="$kde_cv_libtiff_$1" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) $2 fi ]) AC_DEFUN(AC_FIND_TIFF, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([AC_FIND_ZLIB]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) KDE_TRY_TIFFLIB(tiff, [], KDE_TRY_TIFFLIB(tiff34)) AC_SUBST(LIBTIFF) ]) AC_DEFUN(AC_FIND_PNG, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_ZLIB]) AC_MSG_CHECKING([for libpng]) AC_CACHE_VAL(ac_cv_lib_png, [ kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" else LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" fi kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_LANG_C AC_TRY_LINK(dnl [ #include ], [ png_structp png_ptr = png_create_read_struct( /* image ptr */ PNG_LIBPNG_VER_STRING, 0, 0, 0 ); return( png_ptr != 0 ); ], eval "ac_cv_lib_png='-lpng $LIBZ -lm'", eval "ac_cv_lib_png=no" ) LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) LIBPNG="$ac_cv_lib_png" AC_SUBST(LIBPNG) AC_MSG_RESULT($ac_cv_lib_png) else AC_MSG_RESULT(no) LIBPNG="" AC_SUBST(LIBPNG) fi ]) AC_DEFUN(AC_CHECK_BOOL, [ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) ]) AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, [ AC_MSG_CHECKING(if you need GNU extensions) AC_CACHE_VAL(ac_cv_gnu_extensions, [ cat > conftest.c << EOF #include #ifdef __GNU_LIBRARY__ yes #endif EOF if (eval "$ac_cpp conftest.c") 2>&5 | egrep "yes" >/dev/null 2>&1; then rm -rf conftest* ac_cv_gnu_extensions=yes else ac_cv_gnu_extensions=no fi ]) AC_MSG_RESULT($ac_cv_gnu_extensions) if test "$ac_cv_gnu_extensions" = "yes"; then AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) fi ]) AC_DEFUN(KDE_CHECK_COMPILER_FLAG, [ AC_MSG_CHECKING(whether $CXX supports -$1) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -$1" AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then AC_MSG_RESULT(yes) : $2 else AC_MSG_RESULT(no) : $3 fi ]) dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) dnl it's all white-space separated AC_DEFUN(AC_REMOVE_FORBIDDEN, [ __val=$$1 __forbid=" $2 " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS $1=$__new fi ]) dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given AC_DEFUN(AC_VALIDIFY_CXXFLAGS, [dnl if test "x$kde_use_qt_emb" != "xyes"; then AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) else AC_REMOVE_FORBIDDEN(CXX, [-rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) fi ]) AC_DEFUN(AC_CHECK_COMPILERS, [ AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], [ case $enableval in yes) kde_use_debug_code="yes" kde_use_debug_define=no ;; full) kde_use_debug_code="full" kde_use_debug_define=no ;; *) kde_use_debug_code="no" kde_use_debug_define=yes ;; esac ], [kde_use_debug_code="no" kde_use_debug_define=no ]) dnl Just for configure --help AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], [ if test $enableval = "no"; then kde_use_strict_options="no" else kde_use_strict_options="yes" fi ], [kde_use_strict_options="no"]) AC_ARG_ENABLE(warnings,[ --enable-warnings compiles with -Wall and similiar], [ if test $enableval = "no"; then kde_use_warnings="no" else kde_use_warnings="yes" fi ], [kde_use_warnings="no"]) dnl enable warnings for debug build if test "$kde_use_debug_code" != "no"; then kde_use_warnings=yes fi AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], [kde_use_profiling=$enableval], [kde_use_profiling="no"] ) dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS CFLAGS=" $CFLAGS" AC_PROG_CC AC_PROG_CPP if test "$GCC" = "yes"; then if test "$kde_use_debug_code" != "no"; then if test $kde_use_debug_code = "full"; then CFLAGS="-g3 $CFLAGS" else CFLAGS="-g -O2 $CFLAGS" fi else CFLAGS="-O2 $CFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CFLAGS="-DNDEBUG $CFLAGS" fi case "$host" in *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; esac if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then LDFLAGS="" fi CXXFLAGS=" $CXXFLAGS" AC_PROG_CXX if test "$GXX" = "yes" || test "$CXX" = "KCC"; then if test "$kde_use_debug_code" != "no"; then if test "$CXX" = "KCC"; then CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" else if test "$kde_use_debug_code" = "full"; then CXXFLAGS="-g3 $CXXFLAGS" else CXXFLAGS="-g -O2 $CXXFLAGS" fi fi KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) dnl convenience compiler flags KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) AC_SUBST(WOVERLOADED_VIRTUAL) else if test "$CXX" = "KCC"; then CXXFLAGS="+K3 $CXXFLAGS" else CXXFLAGS="-O2 $CXXFLAGS" fi fi fi if test "$kde_use_debug_define" = "yes"; then CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" fi if test "$kde_use_profiling" = "yes"; then KDE_CHECK_COMPILER_FLAG(pg, [ CFLAGS="-pg $CFLAGS" CXXFLAGS="-pg $CXXFLAGS" ]) fi if test "$kde_use_warnings" = "yes"; then if test "$GCC" = "yes"; then case $host in *-*-linux-gnu) CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion $CXXFLAGS" ;; esac CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wbad-function-cast,[CXXFLAGS="-Wbad-function-cast $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) fi fi if test "$GCC" = "yes" && test "$kde_use_strict_options" = "yes"; then CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" fi if test "$GXX" = "yes"; then KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) fi if test "$CXX" = "KCC"; then dnl unfortunately we currently cannot disable exception support in KCC dnl because doing so is binary incompatible and Qt by default links with exceptions :-( dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], [ kde_use_pch=$enableval ],[kde_use_pch=no]) if test "$kde_use_pch" = "yes"; then dnl TODO: support --pch-dir! KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) dnl the below works (but the dir must exist), but it's dnl useless for a whole package. dnl The are precompiled headers for each source file, so when compiling dnl from scratch, it doesn't make a difference, and they take up dnl around ~5Mb _per_ sourcefile. dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) fi dnl this flag controls inlining. by default KCC inlines in optimisation mode dnl all implementations that are defined inside the class {} declaration. dnl because of templates-compatibility with broken gcc compilers, this dnl can cause excessive inlining. This flag limits it to a sane level KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) dnl Some source files are shared between multiple executables dnl (or libraries) and some of those need template instantiations. dnl In that case KCC needs to compile those sources with dnl --one_instantiation_per_object. To make it easy for us we compile dnl _all_ objects with that flag (--one_per is a shorthand). KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) fi AC_SUBST(USE_EXCEPTIONS) dnl obsolete macro - provided to keep things going USE_RTTI= AC_SUBST(USE_RTTI) case "$host" in *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; *-*-solaris*) if test "$GXX" = yes; then libstdcpp=`$CXX -print-file-name=libstdc++.so` if test ! -f $libstdcpp; then AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) fi fi ;; esac AC_VALIDIFY_CXXFLAGS AC_PROG_CXXCPP # the following is to allow programs, that are known to # have problems when compiled with -O2 if test -n "$CXXFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CXXFLAGS="" for i in $CXXFLAGS; do case $i in -O*) ;; *) NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test -n "$CFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CFLAGS="" for i in $CFLAGS; do case $i in -O*) ;; *) NOOPT_CFLAGS="$NOOPT_CFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test "x$kde_use_qt_emb" = "xyes"; then NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS -fno-rtti -DQWS" fi AC_SUBST(NOOPT_CXXFLAGS) AC_SUBST(NOOPT_CFLAGS) KDE_CHECK_FINAL ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) KDE_CXXFLAGS= AC_SUBST(KDE_CXXFLAGS) ]) AC_DEFUN(KDE_ADD_DEPENDENCIES, [ [A]M_DEPENDENCIES(CC) [A]M_DEPENDENCIES(CXX) ]) dnl just a wrapper to clean up configure.in AC_DEFUN(KDE_PROG_LIBTOOL, [ AC_REQUIRE([AC_CHECK_COMPILERS]) AC_REQUIRE([AC_ENABLE_SHARED]) AC_REQUIRE([AC_ENABLE_STATIC]) AC_REQUIRE([AC_LIBTOOL_DLOPEN]) AC_LANG_SAVE AC_LANG_C AC_OBJEXT AC_EXEEXT AC_LANG_RESTORE AM_PROG_LIBTOOL AC_LIBTOOL_CXX LIBTOOL_SHELL="/bin/sh ./libtool" # LIBTOOL="$LIBTOOL --silent" KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" AC_SUBST(KDE_PLUGIN) AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (experimental [only tested on linux/386])], kde_use_objprelink=$enableval, kde_use_objprelink=no) if test "x$kde_use_objprelink" = "xyes"; then KDE_FIND_PATH(objprelink, OBJPRELINK, [], [kde_use_objprelink=no]) if test "x$kde_use_objprelink" = "xyes"; then AC_MSG_CHECKING([Patching libtool to run objprelink.]) mv libtool libtool.orig cat > libtool <<\EOF #! /bin/sh for n ; do case $n in *.o) test -r $n && echo objprelink $n && objprelink $n ;; *.lo) m=`basename $n .lo`".o" && test -r $m && echo objprelink $m && objprelink $m m=".libs/$m" && test -r $m && echo objprelink $m && objprelink $m ;; esac; done EOF cat >> libtool libtool.orig rm libtool.orig chmod a+x libtool AC_MSG_RESULT(done) fi fi ]) AC_DEFUN(KDE_CHECK_TYPES, [ AC_CHECK_SIZEOF(int, 4)dnl AC_CHECK_SIZEOF(long, 4)dnl AC_CHECK_SIZEOF(char *, 4)dnl AC_CHECK_SIZEOF(char, 1)dnl ])dnl AC_DEFUN(KDE_DO_IT_ALL, [ AC_CANONICAL_SYSTEM AC_ARG_PROGRAM AM_INIT_AUTOMAKE($1, $2) AM_DISABLE_LIBRARIES AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) AC_CHECK_COMPILERS KDE_PROG_LIBTOOL AM_KDE_WITH_NLS AC_PATH_KDE ]) AC_DEFUN(AC_CHECK_RPATH, [ AC_MSG_CHECKING(for rpath) AC_ARG_ENABLE(rpath, [ --disable-rpath do not use the rpath feature of ld], USE_RPATH=$enableval, USE_RPATH=yes) if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then KDE_RPATH="-R \$(kde_libraries)" if test -n "$qt_libraries"; then KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" fi dnl $x_libraries is set to /usr/lib in case if test -n "$X_LDFLAGS"; then KDE_RPATH="$KDE_RPATH -R \$(x_libraries)" fi if test -n "$KDE_EXTRA_RPATH"; then KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" fi fi AC_SUBST(KDE_EXTRA_RPATH) AC_SUBST(KDE_RPATH) AC_MSG_RESULT($USE_RPATH) ]) dnl Check for the type of the third argument of getsockname AC_DEFUN(AC_CHECK_SOCKLEN_T, [ AC_MSG_CHECKING(for socklen_t) AC_CACHE_VAL(ac_cv_socklen_t, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include #include ],[ socklen_t a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=socklen_t, AC_TRY_COMPILE([ #include #include ],[ int a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=int, ac_cv_socklen_t=size_t ) ) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_socklen_t) if test "$ac_cv_socklen_t" != "socklen_t"; then AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, [Define the real type of socklen_t]) fi AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) ]) dnl This is a merge of some macros out of the gettext aclocal.m4 dnl since we don't need anything, I took the things we need dnl the copyright for them is: dnl > dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. dnl This Makefile.in is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. dnl > dnl for this file it is relicensed under LGPL AC_DEFUN(AM_KDE_WITH_NLS, [ dnl If we use NLS figure out what method AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) GMSGFMT=":" fi MSGFMT=$GMSGFMT AC_SUBST(GMSGFMT) AC_SUBST(MSGFMT) AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext programs is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi AC_SUBST(XGETTEXT) ]) # Search path for a program which passes the given test. # Ulrich Drepper , 1996. # serial 1 # Stephan Kulow: I appended a _KDE against name conflicts dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test -n "[$]$1"; then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # serial 1 AC_DEFUN(AM_LC_MESSAGES, [if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) fi fi]) dnl From Jim Meyering. dnl FIXME: migrate into libit. AC_DEFUN([AM_FUNC_OBSTACK], [AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, [AC_TRY_LINK([#include "obstack.h"], [struct obstack *mem;obstack_free(mem,(char *) 0)], am_cv_func_obstack=yes, am_cv_func_obstack=no)]) if test $am_cv_func_obstack = yes; then AC_DEFINE(HAVE_OBSTACK) else LIBOBJS="$LIBOBJS obstack.o" fi ]) dnl From Jim Meyering. Use this if you use the GNU error.[ch]. dnl FIXME: Migrate into libit AC_DEFUN([AM_FUNC_ERROR_AT_LINE], [AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], am_cv_lib_error_at_line=yes, am_cv_lib_error_at_line=no)]) if test $am_cv_lib_error_at_line = no; then LIBOBJS="$LIBOBJS error.o" fi AC_SUBST(LIBOBJS)dnl ]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995. # serial 1 # Stephan Kulow: I put a KDE in it to avoid name conflicts AC_DEFUN(AM_KDE_GNU_GETTEXT, [AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_REQUIRE([AM_KDE_WITH_NLS])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h]) AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ __argz_count __argz_stringify __argz_next]) AC_MSG_CHECKING(for stpcpy) AC_CACHE_VAL(kde_cv_func_stpcpy, [ kde_safe_cxxflags=$CXXFLAGS CXXFLAGS="-Wmissing-prototypes -Werror" AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include ], [ char buffer[200]; stpcpy(buffer, buffer); ], kde_cv_func_stpcpy=yes, kde_cv_func_stpcpy=no) AC_LANG_RESTORE CXXFLAGS=$kde_safe_cxxflags ]) AC_MSG_RESULT($kde_cv_func_stpcpy) if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) fi AM_LC_MESSAGES if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; esac done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi ]) AC_DEFUN(AC_HAVE_XPM, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= test -z "$XPM_INCLUDE" && XPM_INCLUDE= AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], xpm_test=$withval, xpm_test="yes") if test "x$xpm_test" = xno; then ac_cv_have_xpm=no else AC_MSG_CHECKING(for XPM) AC_CACHE_VAL(ac_cv_have_xpm, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" if test "x$kde_use_qt_emb" != "xyes"; then LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" else LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" fi CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" AC_TRY_LINK([#include ],[], ac_cv_have_xpm="yes",ac_cv_have_xpm="no") LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_xpm" = no; then AC_MSG_RESULT(no) XPM_LDFLAGS="" XPMINC="" $2 else AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) if test "$XPM_LDFLAGS" = ""; then XPMLIB='-lXpm $(LIB_X11)' else XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' fi if test "$XPM_INCLUDE" = ""; then XPMINC="" else XPMINC="-I$XPM_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(XPMINC) AC_SUBST(XPMLIB) ]) AC_DEFUN(AC_HAVE_DPMS, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= DPMS_LIB= AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], dpms_test=$withval, dpms_test="yes") if test "x$dpms_test" = xno; then ac_cv_have_dpms=no else AC_MSG_CHECKING(for DPMS) dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". AC_CACHE_VAL(ac_cv_have_dpms, [ if test "x$kde_use_qt_emb" = "xyes"; then AC_MSG_RESULT(no) ac_cv_have_dpms="no" else AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" ac_save_libs="$LIBS" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], ac_cv_have_dpms="yes", [ LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" LIBS="$LIBS -lXdpms" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], [ ac_cv_have_dpms="-lXdpms" ],ac_cv_have_dpms="no") ]) LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LIBS="$ac_save_libs" fi ])dnl if test "$ac_cv_have_dpms" = no; then AC_MSG_RESULT(no) DPMS_LDFLAGS="" DPMSINC="" $2 else AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) if test "$ac_cv_have_dpms" = "-lXdpms"; then DPMS_LIB="-lXdpms" fi if test "$DPMS_LDFLAGS" = ""; then DPMSLIB="$DPMS_LIB "'$(LIB_X11)' else DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' fi if test "$DPMS_INCLUDE" = ""; then DPMSINC="" else DPMSINC="-I$DPMS_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(DPMSINC) AC_SUBST(DPMSLIB) ]) AC_DEFUN(AC_HAVE_GL, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$GL_LDFLAGS" && GL_LDFLAGS= test -z "$GL_INCLUDE" && GL_INCLUDE= AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], gl_test=$withval, gl_test="yes") if test "x$kde_use_qt_emb" = "xyes"; then # GL and Qt Embedded is a no-go for now. ac_cv_have_gl=no elif test "x$gl_test" = xno; then ac_cv_have_gl=no else AC_MSG_CHECKING(for GL) AC_CACHE_VAL(ac_cv_have_gl, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="mesa", ac_cv_have_gl="no") if test "x$ac_cv_have_gl" = "xno"; then LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$ac_save_cflags $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="yes", ac_cv_have_gl="no") fi LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_gl" = "no"; then AC_MSG_RESULT(no) GL_LDFLAGS="" GLINC="" $2 else AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) if test "$GL_LDFLAGS" = ""; then if test "$ac_cv_have_gl" = "mesa"; then GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)' else GLLIB='-lGL -lGLU $(LIB_X11)' fi else if test "$ac_cv_have_gl" = "mesa"; then GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)' else GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)' fi fi if test "$GL_INCLUDE" = ""; then GLINC="" else GLINC="-I$GL_INCLUDE" fi AC_MSG_RESULT($ac_cv_have_gl) $1 fi fi AC_SUBST(GLINC) AC_SUBST(GLLIB) ]) dnl shadow password and PAM magic - maintained by ossi@kde.org AC_DEFUN(KDE_PAM, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_ARG_WITH(pam, [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], [ if test "x$withval" = "xyes"; then use_pam=yes pam_service=kde elif test "x$withval" = "xno"; then use_pam=no else use_pam=yes pam_service=$withval fi ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ], [ AC_CACHE_VAL(ac_cv_path_pam, [ use_pam=no AC_CHECK_LIB(pam, pam_start, [ AC_CHECK_HEADER(security/pam_appl.h, [ use_pam=yes pam_service=kde ]) ], , $LIBDL) ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ]) ]) eval "$ac_cv_path_pam" AC_MSG_CHECKING(for PAM) if test "x$use_pam" = xno; then AC_MSG_RESULT(no) PAMLIBS="" else AC_MSG_RESULT(yes) AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" dnl test whether struct pam_message is const (Linux) or not (Sun) AC_MSG_CHECKING(for const pam_message) AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, [AC_MSG_RESULT([const: Linux-type PAM])], [AC_MSG_RESULT([nonconst: Sun-type PAM]) AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] )], [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) fi AC_SUBST(PAMLIBS) ]) dnl DEF_PAM_SERVICE(arg name, full name, define name) AC_DEFUN(DEF_PAM_SERVICE, [ AC_ARG_WITH($1-pam, [ --with-$1-pam=[val] override PAM service from --with-pam for $2], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$withval" else AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. You may want to enforce it by using --with-pam.]) fi ], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$pam_service" fi ]) if test -n "$$3_PAM_SERVICE"; then AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) fi AC_SUBST($3_PAM_SERVICE) ]) AC_DEFUN(KDE_SHADOWPASSWD, [ AC_REQUIRE([KDE_PAM]) AC_CHECK_LIB(shadow, getspent, [ LIBSHADOW="-lshadow" ac_use_shadow=yes ], [ dnl for UnixWare AC_CHECK_LIB(gen, getspent, [ LIBGEN="-lgen" ac_use_shadow=yes ], [ AC_CHECK_FUNC(getspent, [ ac_use_shadow=yes ], [ ac_use_shadow=no ]) ]) ]) AC_SUBST(LIBSHADOW) AC_SUBST(LIBGEN) AC_MSG_CHECKING([for shadow passwords]) AC_ARG_WITH(shadow, [ --with-shadow If you want shadow password support ], [ if test "x$withval" != "xno"; then use_shadow=yes else use_shadow=no fi ], [ use_shadow="$ac_use_shadow" ]) if test "x$use_shadow" = xyes; then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) else AC_MSG_RESULT(no) LIBSHADOW= LIBGEN= fi dnl finally make the relevant binaries setuid root, if we have shadow passwds. dnl this still applies, if we could use it indirectly through pam. if test "x$use_shadow" = xyes || ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then case $host in *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) SETUIDFLAGS="-m 4755 -o root";; *) SETUIDFLAGS="-m 4755";; esac fi AC_SUBST(SETUIDFLAGS) ]) AC_DEFUN(KDE_PASSWDLIBS, [ AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT AC_REQUIRE([KDE_PAM]) AC_REQUIRE([KDE_SHADOWPASSWD]) if test "x$use_pam" = "xyes"; then PASSWDLIBS="$PAMLIBS" else PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" fi dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires dnl root to read, so kcheckpass needs to be root (even when using pam, since pam dnl may need to read /etc/master.passwd). case $host in *-*-freebsd*) SETUIDFLAGS="-m 4755 -o root" ;; *) ;; esac AC_SUBST(PASSWDLIBS) ]) AC_DEFUN(KDE_CHECK_LIBDL, [ AC_CHECK_LIB(dl, dlopen, [ LIBDL="-ldl" ac_cv_have_dlfcn=yes ]) AC_CHECK_LIB(dld, shl_unload, [ LIBDL="-ldld" ac_cv_have_shload=yes ]) AC_SUBST(LIBDL) ]) AC_DEFUN(KDE_CHECK_DLOPEN, [ KDE_CHECK_LIBDL AC_CHECK_HEADERS(dlfcn.h dl.h) if test "$ac_cv_header_dlfcn_h" = "no"; then ac_cv_have_dlfcn=no fi if test "$ac_cv_header_dl_h" = "no"; then ac_cv_have_shload=no fi dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE dnl (MM) AC_ARG_ENABLE(dlopen, [ --disable-dlopen link statically [default=no]] , enable_dlopen=$enableval, enable_dlopen=yes) # override the user's opinion, if we know it better ;) if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then enable_dlopen=no fi if test "$ac_cv_have_dlfcn" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) fi if test "$ac_cv_have_shload" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) fi if test "$enable_dlopen" = no ; then test -n "$1" && eval $1 else test -n "$2" && eval $2 fi ]) AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, [ KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) KDE_PROG_LIBTOOL AC_MSG_CHECKING([dynamic loading]) eval "`egrep '^build_libtool_libs=' libtool`" if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then dynamic_loading=yes AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) else dynamic_loading=no fi AC_MSG_RESULT($dynamic_loading) if test "$dynamic_loading" = "yes"; then $1 else $2 fi ]) AC_DEFUN(KDE_ADD_INCLUDES, [ if test -z "$1"; then test_include="Pix.h" else test_include="$1" fi AC_MSG_CHECKING([for libg++ ($test_include)]) AC_CACHE_VAL(kde_cv_libgpp_includes, [ kde_cv_libgpp_includes=no for ac_dir in \ \ /usr/include/g++ \ /usr/include \ /usr/unsupported/include \ /opt/include \ $extra_include \ ; \ do if test -r "$ac_dir/$test_include"; then kde_cv_libgpp_includes=$ac_dir break fi done ]) AC_MSG_RESULT($kde_cv_libgpp_includes) if test "$kde_cv_libgpp_includes" != "no"; then all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" fi ]) ]) AC_DEFUN(KDE_CHECK_MICO, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_MISC_TESTS]) AC_MSG_CHECKING(for MICO) if test -z "$MICODIR"; then kde_micodir=/usr/local else kde_micodir="$MICODIR" fi AC_ARG_WITH(micodir, [ --with-micodir=micodir where mico is installed ], kde_micodir=$withval, kde_micodir=$kde_micodir ) AC_CACHE_VAL(kde_cv_mico_incdir, [ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) ]) kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` if test ! -r $kde_micodir/include/CORBA.h; then AC_MSG_ERROR([No CORBA.h found, specify another micodir]) fi AC_MSG_RESULT($kde_micodir) MICO_INCLUDES=-I$kde_micodir/include AC_SUBST(MICO_INCLUDES) MICO_LDFLAGS=-L$kde_micodir/lib AC_SUBST(MICO_LDFLAGS) micodir=$kde_micodir AC_SUBST(micodir) AC_MSG_CHECKING([for MICO version]) AC_CACHE_VAL(kde_cv_mico_version, [ AC_LANG_C cat >conftest.$ac_ext < #include int main() { printf("MICO_VERSION=%s\n",MICO_VERSION); return (0); } EOF ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' if AC_TRY_EVAL(ac_compile); then if eval `./conftest 2>&5`; then kde_cv_mico_version=$MICO_VERSION else AC_MSG_ERROR([your system is not able to execute a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi else AC_MSG_ERROR([your system is not able to compile a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi ]) dnl installed MICO version mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "x$1" = "x"; then req_version="2.3.0" else req_version=$1 fi dnl required MICO version req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "$mico_v_maj" -lt "$req_v_maj" || \ ( test "$mico_v_maj" -eq "$req_v_maj" && \ test "$mico_v_mid" -lt "$req_v_mid" ) || \ ( test "$mico_v_mid" -eq "$req_v_mid" && \ test "$mico_v_min" -lt "$req_v_min" ) then AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ at least is required. You should upgrade MICO.]) else AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) fi LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" AC_SUBST(LIBMICO) if test -z "$IDL"; then IDL='$(kde_bindir)/cuteidl' fi AC_SUBST(IDL) IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' AC_SUBST(IDL_DEPENDENCIES) idldir="\$(includedir)/idl" AC_SUBST(idldir) ]) AC_DEFUN(KDE_CHECK_MINI_STL, [ AC_REQUIRE([KDE_CHECK_MICO]) AC_MSG_CHECKING(if we use mico's mini-STL) AC_CACHE_VAL(kde_cv_have_mini_stl, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_cxxflags="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" AC_TRY_COMPILE( [ #include ], [ #ifdef HAVE_MINI_STL #error "nothing" #endif ], kde_cv_have_mini_stl=no, kde_cv_have_mini_stl=yes) CXXFLAGS="$kde_save_cxxflags" AC_LANG_RESTORE ]) if test "x$kde_cv_have_mini_stl" = "xyes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) ]) AC_DEFUN(KDE_CHECK_LIBPTHREAD, [ AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, [ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], kde_use_kernthreads=$enableval, kde_use_kernthreads=no) if test "$kde_use_kernthreads" = "yes"; then ac_save_CXXFLAGS="$CXXFLAGS" ac_save_CFLAGS="$CFLAGS" CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) CXXFLAGS="$ac_save_CXXFLAGS" CFLAGS="$ac_save_CFLAGS" if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then kde_use_kernthreads=no else dnl Add proper -I and -l statements AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD if test "x$LIBPTHREAD" = "x"; then kde_use_kernthreads=no else USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" fi fi else USE_THREADS="" if test -z "$LIBPTHREAD"; then KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) fi fi case $host_os in solaris*) KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" ;; freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;; aix*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" LIBPTHREAD="$LIBPTHREAD -lc_r" ;; linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" if test "$CXX" = "KCC"; then CXXFLAGS="$CXXFLAGS --thread_safe" NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" fi ;; *) ;; esac AC_SUBST(USE_THREADS) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_THREADING, [ AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) dnl default is yes if libpthread is found and no if no libpthread is available if test -z "$LIBPTHREAD"; then if test -z "$USE_THREADS"; then kde_check_threading_default=no else kde_check_threading_default=yes fi else kde_check_threading_default=yes fi AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) if test "x$kde_use_threading" = "xyes"; then AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) fi ]) AC_DEFUN(KDE_TRY_LINK_PYTHON, [ if test "$kde_python_link_found" = no; then if test "$1" = normal; then AC_MSG_CHECKING(if a Python application links) else AC_MSG_CHECKING(if Python depends on $2) fi AC_CACHE_VAL(kde_cv_try_link_python_$1, [ AC_LANG_SAVE AC_LANG_C kde_save_cflags="$CFLAGS" CFLAGS="$CFLAGS $PYTHONINC" kde_save_libs="$LIBS" LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" kde_save_ldflags="$LDFLAGS" LDFLAGS="$LDFLAGS $PYTHONLIB" AC_TRY_LINK( [ #include ],[ PySys_SetArgv(1, 0); ], [kde_cv_try_link_python_$1=yes], [kde_cv_try_link_python_$1=no] ) CFLAGS="$kde_save_cflags" LIBS="$kde_save_libs" LDFLAGS="$kde_save_ldflags" ]) if test "$kde_cv_try_link_python_$1" = "yes"; then AC_MSG_RESULT(yes) kde_python_link_found=yes if test ! "$1" = normal; then LIBPYTHON="$LIBPYTHON $2" fi $3 else AC_MSG_RESULT(no) $4 fi AC_LANG_RESTORE fi ]) AC_DEFUN(KDE_CHECK_PYTHON_DIR, [ AC_MSG_CHECKING([for Python directory]) AC_CACHE_VAL(kde_cv_pythondir, [ if test -z "$PYTHONDIR"; then kde_cv_pythondir=/usr/local else kde_cv_pythondir="$PYTHONDIR" fi ]) AC_ARG_WITH(pythondir, [ --with-pythondir=pythondir use python installed in pythondir ], [ ac_python_dir=$withval ], ac_python_dir=$kde_cv_pythondir ) AC_MSG_RESULT($ac_python_dir) ]) AC_DEFUN(KDE_CHECK_PYTHON_INTERN, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) if test -z "$1"; then version="1.5" else version="$1" fi AC_MSG_CHECKING([for Python$version]) python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) if test ! -r $python_incdir/Python.h; then AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) python_incdir=$python_incdir/python$version if test ! -r $python_incdir/Python.h; then python_incdir=no fi fi PYTHONINC=-I$python_incdir python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) if test ! -r $python_libdir/libpython$version.a; then AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) python_libdir=$python_libdir/python$version/config if test ! -r $python_libdir/libpython$version.a; then python_libdir=no fi fi PYTHONLIB=-L$python_libdir kde_orig_LIBPYTHON=$LIBPYTHON if test -z "$LIBPYTHON"; then LIBPYTHON=-lpython$version fi python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) python_moddir=$python_moddir/python$version if test ! -r $python_moddir/copy.py; then python_moddir=no fi PYTHONMODDIR=$python_moddir AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then LIBPYTHON=$kde_orig_LIBPYTHON test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" $2 else dnl Note: this test is very weak kde_python_link_found=no KDE_TRY_LINK_PYTHON(normal) KDE_TRY_LINK_PYTHON(m, -lm) KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) KDE_TRY_LINK_PYTHON(tcl, -ltcl) KDE_TRY_LINK_PYTHON(db2, -ldb2) KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], [AC_MSG_WARN([it seems, Python depends on another library. Pleae set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this and contact the authors to let them know about this problem]) ]) LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" AC_SUBST(PYTHONINC) AC_SUBST(PYTHONLIB) AC_SUBST(LIBPYTHON) AC_SUBST(PYTHONMODDIR) AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) fi ]) AC_DEFUN(KDE_CHECK_PYTHON, [ KDE_CHECK_PYTHON_INTERN("2.2", [KDE_CHECK_PYTHON_INTERN("2.1", [KDE_CHECK_PYTHON_INTERN("2.0", [ KDE_CHECK_PYTHON_INTERN($1, $2) ]) ])]) ]) AC_DEFUN(KDE_CHECK_STL_SGI, [ AC_MSG_CHECKING([if STL implementation is SGI like]) AC_CACHE_VAL(kde_cv_stl_type_sgi, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hallo Welt."; astring.erase(0, 6); // now astring is "Welt" return 0; ], kde_cv_stl_type_sgi=yes, kde_cv_stl_type_sgi=no) ]) AC_MSG_RESULT($kde_cv_stl_type_sgi) if test "$kde_cv_stl_type_sgi" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) fi ]) AC_DEFUN(KDE_CHECK_STL_HP, [ AC_MSG_CHECKING([if STL implementation is HP like]) AC_CACHE_VAL(kde_cv_stl_type_hp, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hello World"; astring.remove(0, 6); // now astring is "World" return 0; ], kde_cv_stl_type_hp=yes, kde_cv_stl_type_hp=no) ]) AC_MSG_RESULT($kde_cv_stl_type_hp) if test "$kde_cv_stl_type_hp" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) fi ]) AC_DEFUN(KDE_CHECK_STL, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" KDE_CHECK_STL_SGI if test "$kde_cv_stl_type_sgi" = "no"; then KDE_CHECK_STL_HP if test "$kde_cv_stl_type_hp" = "no"; then AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") fi fi CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) AC_DEFUN(AC_FIND_QIMGIO, [AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for qimgio]) AC_CACHE_VAL(ac_cv_lib_qimgio, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" ac_save_CXXFLAGS="$CXXFLAGS" LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" AC_TRY_RUN(dnl [ #include #include int main() { QString t = "hallo"; t.fill('t'); qInitImageIO(); } ], ac_cv_lib_qimgio=yes, ac_cv_lib_qimgio=no, ac_cv_lib_qimgio=no) LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ])dnl if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) AC_SUBST(LIBQIMGIO) else AC_MSG_RESULT(not found) fi ]) AC_DEFUN(KDE_CHECK_ANSI, [ ]) AC_DEFUN(KDE_CHECK_INSURE, [ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], [ if test $enableval = "no"; dnl then ac_use_insure="no" else ac_use_insure="yes" fi ], [ac_use_insure="no"]) AC_MSG_CHECKING(if we will use Insure++ to debug) AC_MSG_RESULT($ac_use_insure) if test "$ac_use_insure" = "yes"; dnl then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? fi ]) AC_DEFUN(AM_DISABLE_LIBRARIES, [ AC_PROVIDE([AM_ENABLE_STATIC]) AC_PROVIDE([AM_ENABLE_SHARED]) enable_static=no enable_shared=yes ]) AC_DEFUN(AC_CHECK_UTMP_FILE, [ AC_MSG_CHECKING([for utmp file]) AC_CACHE_VAL(kde_cv_utmp_file, [ kde_cv_utmp_file=no for ac_file in \ \ /var/run/utmp \ /var/adm/utmp \ /etc/utmp \ ; \ do if test -r "$ac_file"; then kde_cv_utmp_file=$ac_file break fi done ]) if test "$kde_cv_utmp_file" != "no"; then AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) $1 AC_MSG_RESULT($kde_cv_utmp_file) else $2 AC_MSG_RESULT([non found]) fi ]) AC_DEFUN(KDE_CREATE_SUBDIRSLIST, [ DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" if test ! -s $srcdir/subdirs; then dnl Note: Makefile.common creates subdirs, so this is just a fallback TOPSUBDIRS="" files=`cd $srcdir && ls -1` dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` for i in $dirs; do echo $i >> $srcdir/subdirs done fi if test -s $srcdir/inst-apps; then ac_topsubdirs="`cat $srcdir/inst-apps`" else ac_topsubdirs="`cat $srcdir/subdirs`" fi for i in $ac_topsubdirs; do AC_MSG_CHECKING([if $i should be compiled]) if test -d $srcdir/$i; then install_it="yes" for j in $DO_NOT_COMPILE; do if test $i = $j; then install_it="no" fi done else install_it="no" fi AC_MSG_RESULT($install_it) if test $install_it = "yes"; then TOPSUBDIRS="$TOPSUBDIRS $i" fi done AC_SUBST(TOPSUBDIRS) ]) AC_DEFUN(KDE_CHECK_NAMESPACES, [ AC_MSG_CHECKING(whether C++ compiler supports namespaces) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ ], [ namespace Foo { extern int i; namespace Bar { extern int i; } } int Foo::i = 0; int Foo::Bar::i = 1; ],[ AC_MSG_RESULT(yes) AC_DEFINE(HAVE_NAMESPACES) ], [ AC_MSG_RESULT(no) ]) AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_NEWLIBS, [ ]) dnl ------------------------------------------------------------------------ dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_S_ISSOCK, [ AC_MSG_CHECKING(for S_ISSOCK) AC_CACHE_VAL(ac_cv_have_s_issock, [ AC_LANG_SAVE AC_LANG_C AC_TRY_LINK( [ #include ], [ struct stat buff; int b = S_ISSOCK( buff.st_mode ); ], ac_cv_have_s_issock=yes, ac_cv_have_s_issock=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_have_s_issock) if test "$ac_cv_have_s_issock" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) fi ]) dnl ------------------------------------------------------------------------ dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, [ AC_MSG_CHECKING(for MAXPATHLEN) AC_CACHE_VAL(ac_cv_maxpathlen, [ AC_LANG_C cat > conftest.$ac_ext < #endif #include #include #ifndef MAXPATHLEN #define MAXPATHLEN 1024 #endif KDE_HELLO MAXPATHLEN EOF ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" if AC_TRY_EVAL(ac_try) && test -s conftest.out; then ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` else ac_cv_maxpathlen=1024 fi rm conftest.* ]) AC_MSG_RESULT($ac_cv_maxpathlen) AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) ]) dnl ------------------------------------------------------------------------- dnl See if the compiler supports a template repository bero@redhat.de dnl ------------------------------------------------------------------------- AC_DEFUN(KDE_COMPILER_REPO, [ REPO="" NOREPO="" KDE_CHECK_COMPILER_FLAG(frepo, [ REPO="-frepo" NOREPO="-fno-repo" ]) if test -z "$REPO"; then KDE_CHECK_COMPILER_FLAG(instances=explicit, [ REPO="-instances=explicit" NOREPO="-instances=extern" ]) fi if test -n "$REPO"; then AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1, [C++ compiler supports template repository]) $1 fi AC_SUBST(REPO) AC_SUBST(NOREPO) ]) AC_DEFUN(KDE_CHECK_HEADER, [ AC_LANG_SAVE kde_safe_cppflags=$CPPFLAGS CPPFLAGS="$CPPFLAGS $all_includes" AC_LANG_CPLUSPLUS AC_CHECK_HEADER($1, $2, $3) CPPFLAGS=$kde_safe_cppflags AC_LANG_RESTORE ]) AC_DEFUN(KDE_FAST_CONFIGURE, [ dnl makes configure fast (needs perl) AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], with_fast_perl=$enableval, with_fast_perl=yes) ]) AC_DEFUN(KDE_CONF_FILES, [ val= if test -f $srcdir/configure.files ; then val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` fi CONF_FILES= if test -n "$val" ; then for i in $val ; do CONF_FILES="$CONF_FILES $i" done fi AC_SUBST(CONF_FILES) ])dnl AC_DEFUN(KDE_SET_PREFIX, [ unset CDPATH dnl make $KDEDIR the default for the installation AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix ac_configure_args="$ac_configure_args --prefix=$prefix" fi KDE_FAST_CONFIGURE KDE_CONF_FILES ]) pushdef([AC_PROG_INSTALL], [ dnl our own version, testing for a -p flag popdef([AC_PROG_INSTALL]) dnl as AC_PROG_INSTALL works as it works we first have dnl to save if the user didn't specify INSTALL, as the dnl autoconf one overwrites INSTALL and we have no chance to find dnl out afterwards test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT AC_PROG_INSTALL if test -z "$kde_save_INSTALL_given" ; then # OK, user hasn't given any INSTALL, autoconf found one for us # now we test, if it supports the -p flag AC_MSG_CHECKING(for -p flag to install) rm -f confinst.$$.* > /dev/null 2>&1 echo "Testtest" > confinst.$$.orig ac_res=no if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then if test -f confinst.$$.new ; then # OK, -p seems to do no harm to install INSTALL="${INSTALL} -p" ac_res=yes fi fi rm -f confinst.$$.* AC_MSG_RESULT($ac_res) fi dnl the following tries to resolve some signs and wonders coming up dnl with different autoconf/automake versions dnl e.g.: dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the dnl install-@DIR@PROGRAMS targets to explicitly use that flag dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from dnl automake (due to broken Makefile.am or whatever) to install programs, dnl and so does not see the -s flag in automake > 1.4 dnl to clean up that mess we: dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG dnl which cleans KDE's program with automake > 1.4; dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems dnl with automake<=1.4 dnl note that dues to this sometimes two '-s' flags are used (if KDE dnl properly uses install-@DIR@PROGRAMS, but I don't care dnl dnl And to all this comes, that I even can't write in comments variable dnl names used by automake, because it is so stupid to think I wanted to dnl _use_ them, therefor I have written A_M_... instead of AM_ dnl hmm, I wanted to say something ... ahh yes: Arghhh. if test -z "$kde_save_INSTALL_PROGRAM_given" ; then INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' fi if test -z "$kde_save_INSTALL_SCRIPT_given" ; then INSTALL_SCRIPT='${INSTALL}' fi ])dnl AC_DEFUN(KDE_LANG_CPLUSPLUS, [AC_LANG_CPLUSPLUS ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) ]) pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS ]) AC_DEFUN(KDE_CHECK_LONG_LONG, [ AC_MSG_CHECKING(for long long) AC_CACHE_VAL(kde_cv_c_long_long, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_LINK([], [ long long foo = 0; foo = foo+1; ], kde_cv_c_long_long=yes, kde_cv_c_long_long=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($kde_cv_c_long_long) if test "$kde_cv_c_long_long" = yes; then AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) fi ]) AC_DEFUN(KDE_CHECK_LIB, [ kde_save_LDFLAGS="$LDFLAGS" dnl AC_CHECK_LIB modifies LIBS, so save it here kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $all_libraries" case $host_os in aix*) LDFLAGS="-brtl $LDFLAGS" test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" ;; esac AC_CHECK_LIB($1, $2, $3, $4, $5) LDFLAGS="$kde_save_LDFLAGS" LIBS="$kde_save_LIBS" ]) AC_DEFUN(KDE_CHECK_INITGROUPS, [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_CHECK_FUNCS(initgroups) if test "x$ac_cv_func_initgroups" = "xyes"; then case $host_os in aix*) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_MSG_CHECKING([for initgroups prototype]) AC_CACHE_VAL(kde_cv_check_initgroups_proto, [ AC_TRY_COMPILE( [ #include ], [ char buffer[10]; gid_t id; int x = initgroups(buffer,id); ], kde_cv_check_initgroups_proto=yes, kde_cv_check_initgroups_proto=no) ]) AC_MSG_RESULT($kde_cv_check_initgroups_proto) AC_LANG_RESTORE ;; *) kde_cv_check_initgroups_proto=yes ;; esac else kde_cv_check_initgroups_proto=no fi if test "x$kde_cv_check_initgroups_proto" = "xyes"; then kde_check_initgroups_proto=1 else kde_check_initgroups_proto=0 fi AC_DEFINE_UNQUOTED(HAVE_INITGROUPS_PROTO,$kde_check_initgroups_proto, [initgroups may exist but not its prototype (e.g. AIX<4.3.3:8)]) ]) AC_DEFUN(KDE_CHECK_JAVA_DIR, [ AC_MSG_CHECKING([for Java directory]) AC_ARG_WITH(java, [ --with-java=javadir use java installed in javadir, --without-java disables ], [ ac_java_dir=$withval ], ac_java_dir="" ) dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH if test "x$ac_java_dir" = "xno"; then kde_cv_java_bindir=no kde_cv_java_includedir=no kde_java_libjvmdir=no kde_java_libhpidir=no else if test "x$ac_java_dir" = "x"; then dnl No option set -> look in $PATH AC_CACHE_VAL(kde_cv_java_bindir, [ dnl First look for javac in $PATH. If not found we'll look at the option. KDE_FIND_PATH(javac, JAVAC, [], []) if test -n "$JAVAC"; then kde_cv_java_bindir=`echo $JAVAC | sed -e 's,/javac$,/,'` dnl this substitution might not work - well, we test for jni.h below kde_cv_java_includedir=`echo $kde_cv_java_bindir | sed -e 's,bin/$,include/,'` else kde_cv_java_bindir=no fi ]) else dnl config option set kde_cv_java_bindir=$ac_java_dir/bin kde_cv_java_includedir=$ac_java_dir/include fi fi dnl At this point kde_cv_java_bindir and kde_cv_java_includedir are either set or "no" if test "x$kde_cv_java_bindir" != "xno"; then dnl Look for libjvm.so kde_java_libjvmdir=`find $kde_cv_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` dnl Look for libhpi.so and avoid green threads kde_java_libhpidir=`find $kde_cv_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,'` dnl Now check everything's fine under there if test ! -x "$kde_cv_java_bindir/javac"; then AC_MSG_ERROR([javac not found under $kde_cv_java_bindir - it seems you passed a wrong --with-java.]) fi if test ! -x "$kde_cv_java_bindir/javah"; then AC_MSG_ERROR([javah not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -x "$kde_cv_java_bindir/jar"; then AC_MSG_ERROR([jar not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -r "$kde_cv_java_includedir/jni.h"; then AC_MSG_ERROR([jni.h not found under $kde_cv_java_includedir. Use --with-java or --without-java.]) fi if test ! -r "$kde_java_libjvmdir/libjvm.so"; then AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) fi if test ! -r "$kde_java_libhpidir/libhpi.so"; then AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) fi jni_includes="-I$kde_cv_java_includedir" dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. dnl and under linux here.. test -d "$kde_cv_java_includedir/linux" && jni_includes="$jni_includes -I$kde_cv_java_includedir/linux" test -d "$kde_cv_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_cv_java_includedir/genunix" dnl Check for JNI version AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" AC_TRY_COMPILE([ #include ], [ #ifndef JNI_VERSION_1_2 Syntax Error #endif ],[ kde_jni_works=yes ], [ kde_jni_works=no ]) if test $kde_jni_works = no; then AC_MSG_ERROR([Incorrect version of $kde_cv_java_includedir/jni.h. You need to have Java Development Kit (JDK) version 1.2. Use --with-java to specify another location. Use --without-java to configure without java support. Or download a newer JDK and try again. See e.g. http://java.sun.com/products/jdk/1.2 ]) fi CXXFLAGS="$ac_cxxflags_safe" AC_LANG_RESTORE dnl All tests ok, inform and subst the variables AC_MSG_RESULT([javac/javah/jar in $kde_cv_java_bindir, jni.h in $kde_cv_java_includedir]) JAVAC=$kde_cv_java_bindir/javac AC_SUBST(JAVAC) JAVAH=$kde_cv_java_bindir/javah AC_SUBST(JAVAH) JAR=$kde_cv_java_bindir/jar AC_SUBST(JAR) AC_SUBST(jni_includes) JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" AC_SUBST(JVMLIBS) fi ]) dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. dnl When the argument list becomes big, as in KDE for AC_OUTPUT in dnl big packages, m4_foreach is dog-slow. So use our own version of dnl it. (matz@kde.org) m4_define([mm_foreach], [m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) m4_define([mm_car], [[$1]]) m4_define([mm_car2], [[$@]]) m4_define([_mm_foreach], [m4_if(m4_quote($2), [], [], [m4_define([$1], [mm_car($2)])$3[]_mm_foreach([$1], mm_car2(m4_shift($2)), [$3])])]) m4_define([AC_FOREACH], [mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) AC_DEFUN(KDE_NEED_FLEX, [ kde_libs_safe=$LIBS LIBS="$LIBS $USER_LDFLAGS" AM_PROG_LEX LIBS=$kde_libs_safe if test -z "$LEXLIB"; then AC_MSG_ERROR([You need to have flex installed.]) fi AC_SUBST(LEXLIB) ]) AC_DEFUN(AC_PATH_QTOPIA, [ dnl TODO: use AC_CACHE_VAL if test -z "$1"; then qtopia_minver_maj=1 qtopia_minver_min=5 qtopia_minver_pat=0 else qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` fi qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" AC_REQUIRE([AC_PATH_QT]) AC_MSG_CHECKING([for Qtopia]) LIB_QTOPIA="-lqpe" AC_SUBST(LIB_QTOPIA) kde_qtopia_dirs="$QPEDIR /opt/Qtopia" ac_qtopia_incdir=NO AC_ARG_WITH(qtopia-dir, [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], [ ac_qtopia_incdir="$withval"/include] ) qtopia_incdirs="" for dir in $kde_qtopia_dirs; do qtopia_incdirs="$qtopia_incdirs $dir/include" done if test ! "$ac_qtopia_incdir" = "NO"; then qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" fi qtopia_incdir="" AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) ac_qtopia_incdir="$qtopia_incdir" if test -z "$qtopia_incdir"; then AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) fi qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" if test "$qtopia_ver" -lt "$qtopia_minver"; then AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr is required.]) fi AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIB_QTOPIA $LIBQT" cat > conftest.$ac_ext < #include int main( int argc, char **argv ) { QPEApplication app( argc, argv ); return 0; } EOF if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else rm -f conftest* AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at the end of config.log]) fi CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE QTOPIA_INCLUDES="-I$qtopia_incdir" AC_SUBST(QTOPIA_INCLUDES) AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) ]) ## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- ## Copyright 1996, 1997, 1998, 1999, 2000, 2001 ## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit , 1996 ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, but ## WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ## General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ## ## As a special exception to the GNU General Public License, if you ## distribute this file as part of a program that contains a ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. # serial 46 AC_PROG_LIBTOOL AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])])])])])]) AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_SAVE AC_LANG_C AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_LIBTOOL_PICMODE - implement the --with-pic flag # Usage: AC_LIBTOOL_PICMODE[(MODE)] # Where MODE is either `yes' or `no'. If omitted, it defaults to # `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default)]) # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ]) # AC_PATH_MAGIC - find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) else MAGIC_CMD=: fi fi ]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] re_direlt=['/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ]) # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" ]) # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognise dependant libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'] else [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'] fi lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; openbsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case "$host_cpu" in i*86 ) changequote(,)dnl lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' changequote([, ])dnl lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; newsos6) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the # configure arguments. Note that LIBLTDL and INCLTDL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed # with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_LIBTOOL_CXX - enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])]) AC_DEFUN([_AC_LIBTOOL_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AC_LIBTOOL_GCJ - enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])]) AC_DEFUN([_AC_LIBTOOL_GCJ], [AC_REQUIRE([AC_PROG_LIBTOOL]) AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) dnl old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) kdocumenteditor-1.0/subdirs0100644000076400007640000000003407742332025016107 0ustar tasukuhomeuserdoc kdocumenteditor pics po kdocumenteditor-1.0/configure.files0100644000076400007640000000005107742332025017515 0ustar tasukuhomeuser./admin/configure.in.min configure.in.in kdocumenteditor-1.0/aclocal.m40100644000076400007640000047345307742332025016374 0ustar tasukuhomeuserdnl aclocal.m4 generated automatically by aclocal 1.4-p4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. dnl This file is part of the KDE libraries/packages dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. dnl IMPORTANT NOTE: dnl Please do not modify this file unless you expect your modifications to be dnl carried into every other module in the repository. If you decide that you dnl really want to modify it, contact coolo@kde.org mentioning that you have dnl and that the modified file should be committed to every module. dnl dnl Single-module modifications are best placed in configure.in for kdelibs dnl and kdebase or configure.in.in if present. dnl ------------------------------------------------------------------------ dnl Forward compatibility macros (make autoconf 2.13 look like 2.50), dnl thanks to Raja R Harinath. dnl ------------------------------------------------------------------------ dnl ifdef([_AC_PATH_X_XMKMF],[], [AC_DEFUN([_AC_PATH_X_XMKMF],[AC_PATH_X_XMKMF])]) ifdef([AC_OUTPUT_SUBDIRS],[], [AC_DEFUN([AC_OUTPUT_SUBDIRS],[subdirs=$1; _AC_OUTPUT_SUBDIRS])]) # KDE_PATH_X_DIRECT dnl Internal subroutine of AC_PATH_X. dnl Set ac_x_includes and/or ac_x_libraries. AC_DEFUN(KDE_PATH_X_DIRECT, [if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. AC_TRY_CPP([#include <$x_direct_test_include>], [# We can compile using X headers with no special include directory. ac_x_includes=], [# Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done]) fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" AC_TRY_LINK(, [${x_direct_test_function}()], [LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries=], [LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do dnl Don't even attempt the hair of trying to link an X program! for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done]) fi # $ac_x_libraries = NO ]) dnl ------------------------------------------------------------------------ dnl Find a file (or one of more files in a list of dirs) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_FIND_FILE, [ $3=NO for i in $2; do for j in $1; do echo "configure: __oline__: $i/$j" >&AC_FD_CC if test -r "$i/$j"; then echo "taking that" >&AC_FD_CC $3=$i break 2 fi done done ]) dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, dnl if-not-found, test-parameter) AC_DEFUN(KDE_FIND_PATH, [ AC_MSG_CHECKING([for $1]) if test -n "$$2"; then kde_cv_path="$$2"; else kde_cache=`echo $1 | sed 'y%./+-%__p_%'` AC_CACHE_VAL(kde_cv_path_$kde_cache, [ kde_cv_path="NONE" dirs="$3" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/$1"; then if test -n "$5" then evalstr="$dir/$1 $5 2>&1 " if eval $evalstr; then kde_cv_path="$dir/$1" break fi else kde_cv_path="$dir/$1" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" ]) eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then AC_MSG_RESULT(not found) $4 else AC_MSG_RESULT($kde_cv_path) $2=$kde_cv_path fi ]) AC_DEFUN(KDE_MOC_ERROR_MESSAGE, [ AC_MSG_ERROR([No Qt meta object compiler (moc) found! Please check whether you installed Qt correctly. You need to have a running moc binary. configure tried to run $ac_cv_path_moc and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable MOC to the right one before running configure. ]) ]) AC_DEFUN(KDE_UIC_ERROR_MESSAGE, [ AC_MSG_WARN([No Qt ui compiler (uic) found! Please check whether you installed Qt correctly. You need to have a running uic binary. configure tried to run $ac_cv_path_uic and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable UIC to the right one before running configure. ]) ]) AC_DEFUN(KDE_CHECK_UIC_FLAG, [ AC_MSG_CHECKING([whether uic supports -$1 ]) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, [ cat >conftest.ui < EOT ac_uic_testrun="$UIC -$1 $2 conftest.ui >/dev/null" if AC_TRY_EVAL(ac_uic_testrun); then eval "kde_cv_prog_uic_$kde_cache=yes" else eval "kde_cv_prog_uic_$kde_cache=no" fi rm -f conftest* ]) if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then AC_MSG_RESULT([yes]) : $3 else AC_MSG_RESULT([no]) : $4 fi ]) dnl ------------------------------------------------------------------------ dnl Find the meta object compiler and the ui compiler in the PATH, dnl in $QTDIR/bin, and some more usual places dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_MOC_UIC, [ qt_bindirs="" for dir in $kde_qt_dirs; do qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" done qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" if test ! "$ac_qt_bindir" = "NO"; then qt_bindirs="$ac_qt_bindir $qt_bindirs" fi KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) if test -z "$UIC_NOT_NEEDED"; then KDE_FIND_PATH(uic, UIC, [$qt_bindirs], [UIC=""]) if test -z "$UIC" ; then KDE_UIC_ERROR_MESSAGE exit 1 elif test $kde_qtver = 3; then KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) if test x$ac_uic_supports_libpath = xyes; then UIC="$UIC -L \$(kde_widgetdir)" fi if test x$ac_uic_supports_nounload = xyes; then UIC="$UIC -nounload" fi fi else UIC="echo uic not available: " fi AC_SUBST(MOC) AC_SUBST(UIC) UIC_TR="i18n" if test $kde_qtver = 3; then UIC_TR="tr2i18n" fi AC_SUBST(UIC_TR) ]) AC_DEFUN(KDE_1_CHECK_PATHS, [ KDE_1_CHECK_PATH_HEADERS KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi AC_MSG_CHECKING([for KDE libraries installed]) ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if AC_TRY_EVAL(ac_link) && test -s conftest; then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log.]) fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes KDE_SET_PATHS($kde_result) ]) AC_DEFUN(KDE_SET_PATHS, [ kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=$1" ]) AC_DEFUN(KDE_SET_DEFAULT_PATHS, [ if test "$1" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then if test "$kde_qtver" = "2"; then kde_moduledir='\${libdir}/kde2' else kde_moduledir='\${libdir}/kde3' fi fi if test -z "$kde_styledir"; then kde_styledir='\${libdir}/kde3/plugins/styles' fi if test -z "$kde_widgetdir"; then kde_widgetdir='\${libdir}/kde3/plugins/designer' fi KDE_SET_PATHS(defaults) else if test $kde_qtver = 1; then AC_MSG_RESULT([compiling]) KDE_1_CHECK_PATHS else AC_MSG_ERROR([path checking not yet supported for KDE 2]) fi fi ]) AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, [ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test -z "$kde_styledir" || test -z "kde_widgetdir" test "x$kde_have_all_paths" != "xyes"; then kde_have_all_paths=no fi ]) AC_DEFUN(KDE_MISSING_PROG_ERROR, [ AC_MSG_ERROR([The important program $1 was not found! Please check whether you installed KDE correctly. ]) ]) AC_DEFUN(KDE_SUBST_PROGRAMS, [ kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" if test -n "$KDEDIRS"; then kde_save_IFS=$IFS IFS=: for dir in $KDEDIRS; do kde_default_bindirs="$dir/bin $kde_default_bindirs " done IFS=$kde_save_IFS fi kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(mcopidl)]) KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(artsc-config)]) KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs]) KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) if test "$KDE_XSL_STYLESHEET" = "NO"; then KDE_XSL_STYLESHEET="" else KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" fi fi DCOP_DEPENDENCIES='$(DCOPIDL)' AC_SUBST(DCOPIDL) AC_SUBST(DCOPIDL2CPP) AC_SUBST(DCOP_DEPENDENCIES) AC_SUBST(MCOPIDL) AC_SUBST(ARTSCCONFIG) AC_SUBST(KDECONFIG) AC_SUBST(MEINPROC) AC_SUBST(KDE_XSL_STYLESHEET) if test -x "$KDECONFIG"; then # it can be "compiled" kde_libs_prefix=`$KDECONFIG --prefix` if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. This means it has been moved since you installed it. This won't work. Please recompile kdelibs for the new prefix. ]) fi kde_libs_htmldir=`$KDECONFIG --install html --expandvars` else kde_libs_prefix='$(prefix)' kde_libs_htmldir='$(kde_htmldir)' fi AC_SUBST(kde_libs_prefix) AC_SUBST(kde_libs_htmldir) ])dnl AC_DEFUN(AC_CREATE_KFSSTND, [ AC_REQUIRE([AC_CHECK_RPATH]) AC_MSG_CHECKING([for KDE paths]) kde_result="" kde_cached_paths=yes AC_CACHE_VAL(kde_cv_all_paths, [ KDE_SET_DEFAULT_PATHS($1) kde_cached_paths=no ]) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then # wrong values were cached, may be, we can set better ones kde_result= kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= kde_have_all_paths= kde_styledir= kde_widgetdir= KDE_SET_DEFAULT_PATHS($1) eval "$kde_cv_all_paths" KDE_CHECK_PATHS_FOR_COMPLETENESS kde_result="$kde_result (cache overridden)" fi if test "$kde_have_all_paths" = "no"; then AC_MSG_ERROR([configure could not run a little KDE program to test the environment. Since it had compiled and linked before, it must be a strange problem on your system. Look at config.log for details. If you are not able to fix this, look at http://www.kde.org/faq/installation.html or any www.kde.org mirror. (If you're using an egcs version on Linux, you may update binutils!) ]) else rm -f conftest* AC_MSG_RESULT($kde_result) fi bindir=$kde_bindir KDE_SUBST_PROGRAMS ]) AC_DEFUN(AC_SUBST_KFSSTND, [ AC_SUBST(kde_htmldir) AC_SUBST(kde_appsdir) AC_SUBST(kde_icondir) AC_SUBST(kde_sounddir) AC_SUBST(kde_datadir) AC_SUBST(kde_locale) AC_SUBST(kde_confdir) AC_SUBST(kde_mimedir) AC_SUBST(kde_wallpaperdir) AC_SUBST(kde_bindir) dnl for KDE 2 AC_SUBST(kde_templatesdir) AC_SUBST(kde_servicesdir) AC_SUBST(kde_servicetypesdir) AC_SUBST(kde_moduledir) AC_SUBST(kde_styledir) AC_SUBST(kde_widgetdir) if test "$kde_qtver" = 1; then kde_minidir="$kde_icondir/mini" else # for KDE 1 - this breaks KDE2 apps using minidir, but # that's the plan ;-/ kde_minidir="/dev/null" fi dnl AC_SUBST(kde_minidir) dnl AC_SUBST(kde_cgidir) dnl AC_SUBST(kde_toolbardir) ]) AC_DEFUN(KDE_MISC_TESTS, [ AC_LANG_C dnl Checks for libraries. AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD AC_SUBST(LIBUTIL) AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD AC_SUBST(LIBCOMPAT) kde_have_crypt= AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ AC_MSG_WARN([you have no crypt in either libcrypt or libc. You should install libcrypt from another source or configure with PAM support]) kde_have_crypt=no ])) AC_SUBST(LIBCRYPT) if test $kde_have_crypt = yes; then AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) fi AC_CHECK_SOCKLEN_T AC_LANG_C AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) if test $ac_cv_lib_dnet_dnet_ntoa = no; then AC_CHECK_LIB(dnet_stub, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) fi AC_CHECK_FUNC(inet_ntoa) if test $ac_cv_func_inet_ntoa = no; then AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") fi AC_CHECK_FUNC(connect) if test $ac_cv_func_connect = no; then AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , $X_EXTRA_LIBS) fi AC_CHECK_FUNC(remove) if test $ac_cv_func_remove = no; then AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. AC_CHECK_FUNC(shmat, , AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) # Solaris 2.6 and others need -lresolv for res_init AC_CHECK_FUNCS(res_init, , [ kde_libs_safe="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS -lresolv" AC_TRY_LINK( [ #include ], [ res_init(); ], LIBRESOLV="-lresolv" X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV" AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) ) LIBS=$kde_libs_safe ]) LIBSOCKET="$X_EXTRA_LIBS" AC_SUBST(LIBSOCKET) AC_SUBST(LIBRESOLV) AC_SUBST(X_EXTRA_LIBS) AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 AC_SUBST(LIBUCB) case $host in dnl this *is* LynxOS specific *-*-lynxos* ) AC_MSG_CHECKING([LynxOS header file wrappers]) [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] AC_MSG_RESULT(disabled) AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS ;; esac KDE_CHECK_TYPES KDE_CHECK_LIBDL ]) dnl ------------------------------------------------------------------------ dnl Find the header files and libraries for X-Windows. Extended the dnl macro AC_PATH_X dnl ------------------------------------------------------------------------ dnl AC_DEFUN(K_PATH_X, [ AC_REQUIRE([KDE_MISC_TESTS])dnl AC_ARG_ENABLE( embedded, [ --enable-embedded link to Qt-embedded, don't use X], kde_use_qt_emb=$enableval, kde_use_qt_emb=no ) AC_ARG_ENABLE( qtopia, [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], kde_use_qt_emb_palm=$enableval, kde_use_qt_emb_palm=no ) if test "$kde_use_qt_emb" = "no"; then AC_MSG_CHECKING(for X) AC_LANG_SAVE AC_LANG_C AC_CACHE_VAL(kde_cv_have_x, [# One or both of the vars are not set, and there is no cached value. if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then kde_x_includes=NO else kde_x_includes=$x_includes fi if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then kde_x_libraries=NO else kde_x_libraries=$x_libraries fi # below we use the standard autoconf calls ac_x_libraries=$kde_x_libraries ac_x_includes=$kde_x_includes KDE_PATH_X_DIRECT dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. dnl Unfortunately, if compiling with the N32 ABI, this is not the correct dnl location. The correct location is /usr/lib32 or an undefined value dnl (the linker is smart enough to pick the correct default library). dnl Things work just fine if you use just AC_PATH_X_DIRECT. dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to dnl /usr/openwin/include, which doesn't work. /usr/include does work, so dnl x_includes should be left alone. case "$host" in mips-sgi-irix6*) ;; *-*-solaris*) ;; *) _AC_PATH_X_XMKMF if test -z "$ac_x_includes"; then ac_x_includes="." fi if test -z "$ac_x_libraries"; then ac_x_libraries="/usr/lib" fi esac #from now on we use our own again # when the user already gave --x-includes, we ignore # what the standard autoconf macros told us. if test "$kde_x_includes" = NO; then kde_x_includes=$ac_x_includes fi # for --x-libraries too if test "$kde_x_libraries" = NO; then kde_x_libraries=$ac_x_libraries fi if test "$kde_x_includes" = NO; then AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) fi if test "$kde_x_libraries" = NO; then AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) fi # Record where we found X for the cache. kde_cv_have_x="have_x=yes \ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" ])dnl eval "$kde_cv_have_x" if test "$have_x" != yes; then AC_MSG_RESULT($have_x) no_x=yes else AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) fi if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then X_INCLUDES="" x_includes="."; dnl better than nothing :- else x_includes=$kde_x_includes X_INCLUDES="-I$x_includes" fi if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then X_LDFLAGS="" x_libraries="/usr/lib"; dnl better than nothing :- else x_libraries=$kde_x_libraries X_LDFLAGS="-L$x_libraries" fi all_includes="$X_INCLUDES" all_libraries="$X_LDFLAGS" AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_libraries) AC_SUBST(x_includes) # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $X_LDFLAGS" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. AC_CHECK_LIB(ICE, IceConnectionNumber, [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) AC_SUBST(LIBSM) LDFLAGS="$ac_save_LDFLAGS" AC_SUBST(X_PRE_LIBS) LIB_X11='-lX11 $(LIBSOCKET)' AC_SUBST(LIB_X11) AC_MSG_CHECKING(for libXext) AC_CACHE_VAL(kde_cv_have_libXext, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" LIBS="-lXext -lX11 $LIBSOCKET" AC_TRY_LINK([ #include #ifdef STDC_HEADERS # include #endif ], [ printf("hello Xext\n"); ], kde_cv_have_libXext=yes, kde_cv_have_libXext=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe ]) AC_MSG_RESULT($kde_cv_have_libXext) if test "$kde_cv_have_libXext" = "no"; then AC_MSG_ERROR([We need a working libXext to proceed. Since configure can't find it itself, we stop here assuming that make wouldn't find them either.]) fi AC_MSG_CHECKING(for Xinerama) AC_ARG_WITH(xinerama, [ --with-xinerama enable support for Xinerama ], [ no_xinerama=no ], [ no_xinerama=yes ] ) kde_save_LDFLAGS="$LDFLAGS" kde_save_CFLAGS="$CFLAGS" kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" CFLAGS="$CFLAGS -I$x_includes" LIBS="-lXinerama -lXext" if test "x$no_xinerama" = "xno"; then AC_CACHE_VAL(ac_cv_have_xinerama, [ AC_TRY_LINK([#include #include ], [XineramaIsActive(NULL);], [ac_cv_have_xinerama="yes"], [ac_cv_have_xinerama="no"]) ]) else ac_cv_have_xinerama=no; fi AC_MSG_RESULT($ac_cv_have_xinerama) LIBXINERAMA="" if test "$ac_cv_have_xinerama" = "yes"; then AC_DEFINE(HAVE_XINERAMA, 1, [Define if you want Xinerama support]) LIBXINERAMA="-lXinerama" fi AC_SUBST(LIBXINERAMA) LDFLAGS="$kde_save_LDFLAGS" CFLAGS="$kde_save_CFLAGS" LIBS="$kde_save_LIBS" LIB_XEXT="-lXext" QTE_NORTTI="" else dnl We're using QT Embedded CXXFLAGS="$CXXFLAGS -fno-rtti -DQWS" CFLAGS="$CFLAGS -DQWS" LDFLAGS="$LDFLAGS -DQWS" QTE_NORTTI="-fno-rtti -DQWS" X_PRE_LIBS="" LIB_X11="" LIB_XEXT="" LIBSM="" X_INCLUDES="" X_LDFLAGS="" x_includes="" x_libraries="" AC_SUBST(X_PRE_LIBS) AC_SUBST(LIB_X11) AC_SUBST(LIBSM) AC_SUBST(X_INCLUDES) AC_SUBST(X_LDFLAGS) AC_SUBST(x_includes) AC_SUBST(x_libraries) fi AC_SUBST(QTE_NORTTI) AC_SUBST(LIB_XEXT) AC_LANG_RESTORE ]) AC_DEFUN(KDE_PRINT_QT_PROGRAM, [ AC_REQUIRE([KDE_USE_QT]) cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi if test "$kde_qtver" = "3"; then cat >> conftest.$ac_ext < #include #include EOF fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" export LD_LIBRARY_PATH LIBRARY_PATH="$ac_LIBRARY_PATH" export LIBRARY_PATH AC_LANG_RESTORE ]) if test "$kde_cv_qt_direct" = "yes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) dnl ------------------------------------------------------------------------ dnl Try to find the Qt headers and libraries. dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_PATH_QT_1_3, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([KDE_USE_QT]) dnl ------------------------------------------------------------------------ dnl Add configure flag to enable linking to MT version of Qt library. dnl ------------------------------------------------------------------------ AC_ARG_ENABLE( mt, [ --disable-mt link to non-threaded Qt (deprecated)], kde_use_qt_mt=$enableval, [ if test $kde_qtver = 3; then kde_use_qt_mt=yes else kde_use_qt_mt=no fi ] ) USING_QT_MT="" dnl ------------------------------------------------------------------------ dnl If we not get --disable-qt-mt then adjust some vars for the host. dnl ------------------------------------------------------------------------ KDE_MT_LDFLAGS= KDE_MT_LIBS= if test "x$kde_use_qt_mt" = "xyes"; then KDE_CHECK_THREADING if test "x$kde_use_threading" = "xyes"; then CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" KDE_MT_LDFLAGS="$USE_THREADS" KDE_MT_LIBS="$LIBPTHREAD" else kde_use_qt_mt=no fi fi AC_SUBST(KDE_MT_LDFLAGS) AC_SUBST(KDE_MT_LIBS) kde_qt_was_given=yes dnl ------------------------------------------------------------------------ dnl If we haven't been told how to link to Qt, we work it out for ourselves. dnl ------------------------------------------------------------------------ if test -z "$LIBQT_GLOB"; then if test "x$kde_use_qt_emb" = "xyes"; then LIBQT_GLOB="libqte.*" else LIBQT_GLOB="libqt.*" fi fi if test -z "$LIBQT"; then dnl ------------------------------------------------------------ dnl If we got --enable-embedded then adjust the Qt library name. dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then qtlib="qte" else qtlib="qt" fi kde_int_qt="-l$qtlib" else kde_int_qt="$LIBQT" kde_lib_qt_set=yes fi if test -z "$LIBQPE"; then dnl ------------------------------------------------------------ dnl If we got --enable-palmtop then add -lqpe to the link line dnl ------------------------------------------------------------ if test "x$kde_use_qt_emb" = "xyes"; then if test "x$kde_use_qt_emb_palm" = "xyes"; then LIB_QPE="-lqpe" else LIB_QPE="" fi else LIB_QPE="" fi fi dnl ------------------------------------------------------------------------ dnl If we got --enable-qt-mt then adjust the Qt library name for the host. dnl ------------------------------------------------------------------------ if test "x$kde_use_qt_mt" = "xyes"; then if test -z "$LIBQT"; then LIBQT="-l$qtlib-mt" kde_int_qt="-l$qtlib-mt" else LIBQT="$qtlib-mt" kde_int_qt="$qtlib-mt" fi LIBQT_GLOB="lib$qtlib-mt.*" USING_QT_MT="using -mt" else LIBQT="-l$qtlib" fi if test $kde_qtver != 1; then AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([AC_FIND_JPEG]) LIBQT="$LIBQT $LIBPNG $LIBJPEG" fi if test $kde_qtver = 3; then AC_REQUIRE([KDE_CHECK_LIBDL]) LIBQT="$LIBQT $LIBDL" fi AC_MSG_CHECKING([for Qt]) if test "x$kde_use_qt_emb" != "xyes"; then LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" fi ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO qt_libraries="" qt_includes="" AC_ARG_WITH(qt-dir, [ --with-qt-dir=DIR where the root of Qt is installed ], [ ac_qt_includes="$withval"/include ac_qt_libraries="$withval"/lib ac_qt_bindir="$withval"/bin ]) AC_ARG_WITH(qt-includes, [ --with-qt-includes=DIR where the Qt includes are. ], [ ac_qt_includes="$withval" ]) kde_qt_libs_given=no AC_ARG_WITH(qt-libraries, [ --with-qt-libraries=DIR where the Qt library is installed.], [ ac_qt_libraries="$withval" kde_qt_libs_given=yes ]) AC_CACHE_VAL(ac_cv_have_qt, [#try to guess Qt locations qt_incdirs="" for dir in $kde_qt_dirs; do qt_incdirs="$qt_incdirs $dir/include $dir" done qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes" if test ! "$ac_qt_includes" = "NO"; then qt_incdirs="$ac_qt_includes $qt_incdirs" fi if test "$kde_qtver" != "1"; then kde_qt_header=qstyle.h else kde_qt_header=qglobal.h fi AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) ac_qt_includes="$qt_incdir" qt_libdirs="" for dir in $kde_qt_dirs; do qt_libdirs="$qt_libdirs $dir/lib $dir" done qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" if test ! "$ac_qt_libraries" = "NO"; then qt_libdir=$ac_qt_libraries else qt_libdirs="$ac_qt_libraries $qt_libdirs" # if the Qt was given, the chance is too big that libqt.* doesn't exist qt_libdir=NONE for dir in $qt_libdirs; do try="ls -1 $dir/${LIBQT_GLOB}" if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi done fi ac_qt_libraries="$qt_libdir" AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIBQT $KDE_MT_LIBS" KDE_PRINT_QT_PROGRAM if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else echo "configure: failed program was:" >&AC_FD_CC cat conftest.$ac_ext >&AC_FD_CC ac_qt_libraries="NO" fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then ac_cv_have_qt="have_qt=no" ac_qt_notfound="" missing_qt_mt="" if test "$ac_qt_includes" = NO; then if test "$ac_qt_libraries" = NO; then ac_qt_notfound="(headers and libraries)"; else ac_qt_notfound="(headers)"; fi else if test "x$kde_use_qt_mt" = "xyes"; then missing_qt_mt=" Make sure that you have compiled Qt with thread support!" ac_qt_notfound="(library $qtlib-mt)"; else ac_qt_notfound="(library $qtlib)"; fi fi AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! For more details about this problem, look at the end of config.log.$missing_qt_mt]) else have_qt="yes" fi ]) eval "$ac_cv_have_qt" if test "$have_qt" != yes; then AC_MSG_RESULT([$have_qt]); else ac_cv_have_qt="have_qt=yes \ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) qt_libraries="$ac_qt_libraries" qt_includes="$ac_qt_includes" fi if test ! "$kde_qt_libs_given" = "yes"; then KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) fi AC_SUBST(qt_libraries) AC_SUBST(qt_includes) if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then QT_INCLUDES="" else QT_INCLUDES="-I$qt_includes" all_includes="$QT_INCLUDES $all_includes" fi if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then QT_LDFLAGS="" else QT_LDFLAGS="-L$qt_libraries" all_libraries="$all_libraries $QT_LDFLAGS" fi test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" AC_SUBST(QT_INCLUDES) AC_SUBST(QT_LDFLAGS) AC_PATH_QT_MOC_UIC KDE_CHECK_QT_JPEG if test "x$kde_use_qt_emb" != "xyes"; then LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' else LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' fi test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" AC_SUBST(LIB_QT) AC_SUBST(LIB_QPE) AC_SUBST(kde_qtver) ]) AC_DEFUN(AC_PATH_QT, [ AC_PATH_QT_1_3 ]) AC_DEFUN(KDE_CHECK_FINAL, [ AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], kde_use_final=$enableval, kde_use_final=no) KDE_COMPILER_REPO if test "x$kde_use_final" = "xyes"; then KDE_USE_FINAL_TRUE="" KDE_USE_FINAL_FALSE="#" else KDE_USE_FINAL_TRUE="#" KDE_USE_FINAL_FALSE="" fi AC_SUBST(KDE_USE_FINAL_TRUE) AC_SUBST(KDE_USE_FINAL_FALSE) AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], kde_use_closure=$enableval, kde_use_closure=yes) if test "x$kde_use_closure" = "xyes"; then KDE_USE_CLOSURE_TRUE="" KDE_USE_CLOSURE_FALSE="#" # CXXFLAGS="$CXXFLAGS $REPO" else KDE_USE_CLOSURE_TRUE="#" KDE_USE_CLOSURE_FALSE="" fi AC_SUBST(KDE_USE_CLOSURE_TRUE) AC_SUBST(KDE_USE_CLOSURE_FALSE) ]) dnl ------------------------------------------------------------------------ dnl Now, the same with KDE dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) dnl and $(kde_includes) will be the kdehdrlocation (if needed) dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_BASE_PATH_KDE, [ AC_PREREQ([2.13]) AC_REQUIRE([AC_PATH_QT])dnl AC_CHECK_RPATH AC_MSG_CHECKING([for KDE]) if test "${prefix}" != NONE; then kde_includes=${prefix}/include ac_kde_includes=$prefix/include if test "${exec_prefix}" != NONE; then kde_libraries=${libdir} ac_kde_libraries=$libdir else kde_libraries=${prefix}/lib ac_kde_libraries=$prefix/lib fi else ac_kde_includes= ac_kde_libraries= kde_libraries="" kde_includes="" fi AC_CACHE_VAL(ac_cv_have_kde, [#try to guess kde locations if test "$kde_qtver" = 1; then kde_check_header="ksock.h" kde_check_lib="libkdecore.la" else kde_check_header="ksharedptr.h" kde_check_lib="libkio.la" fi if test -z "$1"; then kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes $includedir" test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" kde_incdirs="$ac_kde_includes $kde_incdirs" AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) ac_kde_includes="$kde_incdir" if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix!]) fi kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib" test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs" kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) ac_kde_libraries="$kde_libdir" if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then AC_MSG_ERROR([ in the prefix, you've chosen, are no KDE libraries installed. This will fail. So, check this please and use another prefix!]) fi ac_kde_libraries="$kde_libdir" if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then ac_cv_have_kde="have_kde=no" else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" fi else dnl test -z $1 ac_cv_have_kde="have_kde=no" fi ])dnl eval "$ac_cv_have_kde" if test "$have_kde" != "yes"; then if test "${prefix}" = NONE; then ac_kde_prefix="$ac_default_prefix" else ac_kde_prefix="$prefix" fi if test "$exec_prefix" = NONE; then ac_kde_exec_prefix="$ac_kde_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix]) else ac_kde_exec_prefix="$exec_prefix" AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) fi kde_libraries="${libdir}" kde_includes=${ac_kde_prefix}/include else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) kde_libraries="$ac_kde_libraries" kde_includes="$ac_kde_includes" fi AC_SUBST(kde_libraries) AC_SUBST(kde_includes) if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then KDE_INCLUDES="" else KDE_INCLUDES="-I$kde_includes" all_includes="$KDE_INCLUDES $all_includes" fi KDE_LDFLAGS="-L$kde_libraries" if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then all_libraries="$all_libraries $KDE_LDFLAGS" fi AC_SUBST(KDE_LDFLAGS) AC_SUBST(KDE_INCLUDES) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) all_libraries="$all_libraries $USER_LDFLAGS" all_includes="$all_includes $USER_INCLUDES" AC_SUBST(all_includes) AC_SUBST(all_libraries) AC_SUBST(AUTODIRS) ]) AC_DEFUN(KDE_CHECK_EXTRA_LIBS, [ AC_MSG_CHECKING(for extra includes) AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR adds non standard include paths], kde_use_extra_includes="$withval", kde_use_extra_includes=NONE ) kde_extra_includes= if test -n "$kde_use_extra_includes" && \ test "$kde_use_extra_includes" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_includes; do kde_extra_includes="$kde_extra_includes $dir" USER_INCLUDES="$USER_INCLUDES -I$dir" done IFS=$ac_save_ifs kde_use_extra_includes="added" else kde_use_extra_includes="no" fi AC_SUBST(USER_INCLUDES) AC_MSG_RESULT($kde_use_extra_includes) kde_extra_libs= AC_MSG_CHECKING(for extra libs) AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], kde_use_extra_libs=$withval, kde_use_extra_libs=NONE ) if test -n "$kde_use_extra_libs" && \ test "$kde_use_extra_libs" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_libs; do kde_extra_libs="$kde_extra_libs $dir" KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" USER_LDFLAGS="$USER_LDFLAGS -L$dir" done IFS=$ac_save_ifs kde_use_extra_libs="added" else kde_use_extra_libs="no" fi AC_SUBST(USER_LDFLAGS) AC_MSG_RESULT($kde_use_extra_libs) ]) AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, [ AC_MSG_CHECKING([for KDE headers installed]) AC_LANG_SAVE AC_LANG_CPLUSPLUS cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); printf("kde_styledir=\\"/tmp/dummy\\"\n"); printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if AC_TRY_EVAL(ac_compile); then AC_MSG_RESULT(yes) else AC_MSG_ERROR([your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log.]) fi AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_KDEQTADDON, [ AC_MSG_CHECKING(for kde-qt-addon) AC_CACHE_VAL(kde_cv_have_kdeqtaddon, [ kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" kde_cxxflags_safe="$CXXFLAGS" LIBS="-lkde-qt-addon $LIBQT $LIBS" CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" AC_TRY_LINK([ #include ], [ QDomDocument doc; ], kde_cv_have_kdeqtaddon=yes, kde_cv_have_kdeqtaddon=no ) LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe CXXFLAGS=$kde_cxxflags_safe ]) AC_MSG_RESULT($kde_cv_have_kdeqtaddon) if test "$kde_cv_have_kdeqtaddon" = "no"; then AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. It is a separate package (and CVS module) named kde-qt-addon.]) fi ]) AC_DEFUN(KDE_CHECK_KIMGIO, [ AC_REQUIRE([AC_BASE_PATH_KDE]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_TIFF]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([AC_FIND_PNG]) AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) if test "$1" = "existance"; then AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" AC_CHECK_LIB(kimgio, kimgioRegister, [ LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) LIBS="$kde_save_LIBS" AC_LANG_RESTORE else LIBKIMGIO_EXISTS=yes fi if test "$LIBKIMGIO_EXISTS" = "yes"; then LIB_KIMGIO='-lkimgio' else LIB_KIMGIO='' fi AC_SUBST(LIB_KIMGIO) ]) AC_DEFUN(KDE_CREATE_LIBS_ALIASES, [ AC_REQUIRE([KDE_MISC_TESTS]) AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([K_PATH_X]) if test $kde_qtver = 3; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) # these are for backward compatibility LIB_KSYCOCA='-lkio' AC_SUBST(LIB_KSYCOCA) LIB_KFILE='-lkio' AC_SUBST(LIB_KFILE) elif test $kde_qtver = 2; then LIB_KDECORE='-lkdecore' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui' AC_SUBST(LIB_KDEUI) LIB_KIO='-lkio' AC_SUBST(LIB_KIO) LIB_KSYCOCA='-lksycoca' AC_SUBST(LIB_KSYCOCA) LIB_SMB='-lsmb' AC_SUBST(LIB_SMB) LIB_KFILE='-lkfile' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab' AC_SUBST(LIB_KAB) LIB_KHTML='-lkhtml' AC_SUBST(LIB_KHTML) LIB_KSPELL='-lkspell' AC_SUBST(LIB_KSPELL) LIB_KPARTS='-lkparts' AC_SUBST(LIB_KPARTS) LIB_KDEPRINT='-lkdeprint' AC_SUBST(LIB_KDEPRINT) else LIB_KDECORE='-lkdecore -lXext $(LIB_QT)' AC_SUBST(LIB_KDECORE) LIB_KDEUI='-lkdeui $(LIB_KDECORE)' AC_SUBST(LIB_KDEUI) LIB_KFM='-lkfm $(LIB_KDECORE)' AC_SUBST(LIB_KFM) LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)' AC_SUBST(LIB_KFILE) LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)' AC_SUBST(LIB_KAB) fi ]) AC_DEFUN(AC_PATH_KDE, [ AC_BASE_PATH_KDE AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], [ if test "$enableval" = "no"; then ac_use_path_checking="default" else ac_use_path_checking="" fi ], [ if test "$kde_qtver" = 1; then ac_use_path_checking="" else ac_use_path_checking="default" fi ] ) AC_CREATE_KFSSTND($ac_use_path_checking) AC_SUBST_KFSSTND KDE_CREATE_LIBS_ALIASES ]) dnl obsolete AC_DEFUN(AC_CHECK_SETENV, [ AC_OBSOLETE([$0], [; instead use AC_CHECK_FUNCS([setenv unsetenv])])dnl AC_CHECK_FUNCS([setenv unsetenv]) ]) AC_DEFUN(AC_CHECK_GETDOMAINNAME, [ AC_MSG_CHECKING(for getdomainname) AC_CACHE_VAL(ac_cv_func_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" kde_safe_LIBS="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_COMPILE([ #include #include ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes, ac_cv_func_getdomainname=no) CXXFLAGS="$save_CXXFLAGS" LIBS=$kde_safe_LIBS AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_getdomainname) AC_MSG_CHECKING([if getdomainname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_getdomainname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then ac_cv_proto_getdomainname=no else kde_safe_libs=$LIBS LIBS="$LIBS $X_EXTRA_LIBS" AC_TRY_LINK([ #include #include extern "C" int getdomainname (char *, int); ], [ char buffer[200]; getdomainname(buffer, 200); ], ac_cv_func_getdomainname=yes ac_cv_proto_getdomainname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR([getdomainname unavailable])) fi LIBS=$kde_safe_libs AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_getdomainname) if eval "test \"`echo $ac_cv_func_getdomainname`\" = yes"; then AC_DEFINE(HAVE_GETDOMAINNAME, 1, [Define if you have getdomainname]) fi if eval "test \"`echo $ac_cv_proto_getdomainname`\" = no"; then AC_DEFINE(HAVE_GETDOMAINNAME_PROTO, 1, [Define if you have getdomainname prototype]) fi ]) AC_DEFUN(AC_CHECK_GETHOSTNAME, [ AC_MSG_CHECKING([for gethostname]) AC_CACHE_VAL(ac_cv_func_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" if test "$GCC" = "yes"; then CXXFLAGS="$CXXFLAGS -pedantic-errors" fi AC_TRY_LINK([ #include #include ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes, ac_cv_func_gethostname=no) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_gethostname) AC_MSG_CHECKING([if gethostname needs custom prototype]) AC_CACHE_VAL(ac_cv_proto_gethostname, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then ac_cv_proto_gethostname=no else AC_TRY_LINK([ #include #include extern "C" int gethostname (char *, int); ], [ char buffer[200]; gethostname(buffer, 200); ], ac_cv_func_gethostname=yes ac_cv_proto_gethostname=yes, AC_MSG_RESULT([fatal error]) AC_MSG_ERROR(gethostname unavailable)) fi AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_proto_gethostname) if eval "test \"`echo $ac_cv_proto_gethostname`\" = no"; then AC_DEFINE(HAVE_GETHOSTNAME_PROTO, 1, [Define if you have gethostname prototype]) fi if eval "test \"`echo $ac_cv_func_gethostname`\" = yes"; then AC_DEFINE(HAVE_GETHOSTNAME, 1, [Define if you have gethostname]) fi ]) AC_DEFUN(AC_CHECK_USLEEP, [ AC_MSG_CHECKING([for usleep]) AC_CACHE_VAL(ac_cv_func_usleep, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include #include ], [ usleep(200); ], ac_cv_func_usleep=yes, ac_cv_func_usleep=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_usleep) if eval "test \"`echo $ac_cv_func_usleep`\" = yes"; then AC_DEFINE(HAVE_USLEEP, 1, [Define if you have the usleep function]) fi ]) AC_DEFUN(AC_CHECK_RANDOM, [ AC_MSG_CHECKING([for random]) AC_CACHE_VAL(ac_cv_func_random, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_libs_safe="$LIBS" LIBS="$LIBS $LIBUCB" AC_TRY_LINK([ #include ], [ random(); ], ac_cv_func_random=yes, ac_cv_func_random=no) LIBS="$ac_libs_safe" AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_func_random) if eval "test \"`echo $ac_cv_func_random`\" = yes"; then AC_DEFINE(HAVE_RANDOM, 1, [Define if you have random]) fi ]) AC_DEFUN(AC_FIND_GIF, [AC_MSG_CHECKING([for giflib]) AC_CACHE_VAL(ac_cv_lib_gif, [ac_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" else LIBS="$all_libraries -lgif" fi AC_TRY_LINK(dnl [ #ifdef __cplusplus extern "C" { #endif int GifLastError(void); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [return GifLastError();], eval "ac_cv_lib_gif=yes", eval "ac_cv_lib_gif=no") LIBS="$ac_save_LIBS" ])dnl if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) else AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) fi ]) AC_DEFUN(KDE_FIND_JPEG_HELPER, [ AC_MSG_CHECKING([for libjpeg$2]) AC_CACHE_VAL(ac_cv_lib_jpeg_$1, [ AC_LANG_C ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [/* Override any gcc2 internal prototype to avoid an error. */ struct jpeg_decompress_struct; typedef struct jpeg_decompress_struct * j_decompress_ptr; typedef int size_t; #ifdef __cplusplus extern "C" { #endif void jpeg_CreateDecompress(j_decompress_ptr cinfo, int version, size_t structsize); #ifdef __cplusplus } #endif /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ ], [jpeg_CreateDecompress(0L, 0, 0);], eval "ac_cv_lib_jpeg_$1=-ljpeg$2", eval "ac_cv_lib_jpeg_$1=no") LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" ]) if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_$1" AC_MSG_RESULT($ac_cv_lib_jpeg_$1) else AC_MSG_RESULT(no) $3 fi ]) AC_DEFUN(AC_FIND_JPEG, [ dnl first look for libraries KDE_FIND_JPEG_HELPER(6b, 6b, KDE_FIND_JPEG_HELPER(normal, [], [ LIBJPEG= ] ) ) dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h dnl requires system dependent includes loaded before it) jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes" AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) test "x$jpeg_incdir" = xNO && jpeg_incdir= dnl if headers _and_ libraries are missing, this is no error, and we dnl continue with a warning (the user will get no jpeg support in khtml) dnl if only one is missing, it means a configuration error, but we still dnl only warn if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) else if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then AC_MSG_WARN([ There is an installation error in jpeg support. You seem to have only one of either the headers _or_ the libraries installed. You may need to either provide correct --with-extra-... options, or the development package of libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ Disabling JPEG support. ]) else AC_MSG_WARN([libjpeg not found. disable JPEG support.]) fi jpeg_incdir= LIBJPEG= fi AC_SUBST(LIBJPEG) ]) AC_DEFUN(KDE_CHECK_QT_JPEG, [ AC_MSG_CHECKING([if Qt needs $LIBJPEG]) AC_CACHE_VAL(kde_cv_qt_jpeg, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS $LIBQT" LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK( [#include ], [ int argc; char** argv; QApplication app(argc, argv);], eval "kde_cv_qt_jpeg=no", eval "kde_cv_qt_jpeg=yes") LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then AC_MSG_RESULT(yes) LIBJPEG_QT='$(LIBJPEG)' else AC_MSG_RESULT(no) LIBJPEG_QT= fi ]) AC_DEFUN(AC_FIND_ZLIB, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for libz]) AC_CACHE_VAL(ac_cv_lib_z, [ AC_LANG_C kde_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (zlibVersion() == ZLIB_VERSION); ], eval "ac_cv_lib_z='-lz'", eval "ac_cv_lib_z=no") LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if test ! "$ac_cv_lib_z" = no; then AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) LIBZ="$ac_cv_lib_z" AC_SUBST(LIBZ) AC_MSG_RESULT($ac_cv_lib_z) else AC_MSG_ERROR(not found. Check your installation and look into config.log) LIBZ="" AC_SUBST(LIBZ) fi ]) AC_DEFUN(KDE_TRY_TIFFLIB, [ AC_MSG_CHECKING([for libtiff $1]) AC_CACHE_VAL(kde_cv_libtiff_$1, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" else LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" fi kde_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" AC_TRY_LINK(dnl [ #include ], [return (TIFFOpen( "", "r") == 0); ], [ kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" ], [ kde_cv_libtiff_$1=no ]) LIBS="$kde_save_LIBS" CXXFLAGS="$kde_save_CXXFLAGS" AC_LANG_RESTORE ]) if test "$kde_cv_libtiff_$1" = "no"; then AC_MSG_RESULT(no) LIBTIFF="" $3 else LIBTIFF="$kde_cv_libtiff_$1" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) $2 fi ]) AC_DEFUN(AC_FIND_TIFF, [ AC_REQUIRE([K_PATH_X]) AC_REQUIRE([AC_FIND_ZLIB]) AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) KDE_TRY_TIFFLIB(tiff, [], KDE_TRY_TIFFLIB(tiff34)) AC_SUBST(LIBTIFF) ]) AC_DEFUN(AC_FIND_PNG, [ AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_REQUIRE([AC_FIND_ZLIB]) AC_MSG_CHECKING([for libpng]) AC_CACHE_VAL(ac_cv_lib_png, [ kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" else LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" fi kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" AC_LANG_C AC_TRY_LINK(dnl [ #include ], [ png_structp png_ptr = png_create_read_struct( /* image ptr */ PNG_LIBPNG_VER_STRING, 0, 0, 0 ); return( png_ptr != 0 ); ], eval "ac_cv_lib_png='-lpng $LIBZ -lm'", eval "ac_cv_lib_png=no" ) LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" ])dnl if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) LIBPNG="$ac_cv_lib_png" AC_SUBST(LIBPNG) AC_MSG_RESULT($ac_cv_lib_png) else AC_MSG_RESULT(no) LIBPNG="" AC_SUBST(LIBPNG) fi ]) AC_DEFUN(AC_CHECK_BOOL, [ AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) ]) AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, [ AC_MSG_CHECKING(if you need GNU extensions) AC_CACHE_VAL(ac_cv_gnu_extensions, [ cat > conftest.c << EOF #include #ifdef __GNU_LIBRARY__ yes #endif EOF if (eval "$ac_cpp conftest.c") 2>&5 | egrep "yes" >/dev/null 2>&1; then rm -rf conftest* ac_cv_gnu_extensions=yes else ac_cv_gnu_extensions=no fi ]) AC_MSG_RESULT($ac_cv_gnu_extensions) if test "$ac_cv_gnu_extensions" = "yes"; then AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) fi ]) AC_DEFUN(KDE_CHECK_COMPILER_FLAG, [ AC_MSG_CHECKING(whether $CXX supports -$1) kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -$1" AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) CXXFLAGS="$save_CXXFLAGS" AC_LANG_RESTORE ]) if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then AC_MSG_RESULT(yes) : $2 else AC_MSG_RESULT(no) : $3 fi ]) dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) dnl it's all white-space separated AC_DEFUN(AC_REMOVE_FORBIDDEN, [ __val=$$1 __forbid=" $2 " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS $1=$__new fi ]) dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given AC_DEFUN(AC_VALIDIFY_CXXFLAGS, [dnl if test "x$kde_use_qt_emb" != "xyes"; then AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) else AC_REMOVE_FORBIDDEN(CXX, [-rpath]) AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) fi ]) AC_DEFUN(AC_CHECK_COMPILERS, [ AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], [ case $enableval in yes) kde_use_debug_code="yes" kde_use_debug_define=no ;; full) kde_use_debug_code="full" kde_use_debug_define=no ;; *) kde_use_debug_code="no" kde_use_debug_define=yes ;; esac ], [kde_use_debug_code="no" kde_use_debug_define=no ]) dnl Just for configure --help AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], [ if test $enableval = "no"; then kde_use_strict_options="no" else kde_use_strict_options="yes" fi ], [kde_use_strict_options="no"]) AC_ARG_ENABLE(warnings,[ --enable-warnings compiles with -Wall and similiar], [ if test $enableval = "no"; then kde_use_warnings="no" else kde_use_warnings="yes" fi ], [kde_use_warnings="no"]) dnl enable warnings for debug build if test "$kde_use_debug_code" != "no"; then kde_use_warnings=yes fi AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], [kde_use_profiling=$enableval], [kde_use_profiling="no"] ) dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS CFLAGS=" $CFLAGS" AC_PROG_CC AC_PROG_CPP if test "$GCC" = "yes"; then if test "$kde_use_debug_code" != "no"; then if test $kde_use_debug_code = "full"; then CFLAGS="-g3 $CFLAGS" else CFLAGS="-g -O2 $CFLAGS" fi else CFLAGS="-O2 $CFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CFLAGS="-DNDEBUG $CFLAGS" fi case "$host" in *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; esac if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then LDFLAGS="" fi CXXFLAGS=" $CXXFLAGS" AC_PROG_CXX if test "$GXX" = "yes" || test "$CXX" = "KCC"; then if test "$kde_use_debug_code" != "no"; then if test "$CXX" = "KCC"; then CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" else if test "$kde_use_debug_code" = "full"; then CXXFLAGS="-g3 $CXXFLAGS" else CXXFLAGS="-g -O2 $CXXFLAGS" fi fi KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) dnl convenience compiler flags KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) AC_SUBST(WOVERLOADED_VIRTUAL) else if test "$CXX" = "KCC"; then CXXFLAGS="+K3 $CXXFLAGS" else CXXFLAGS="-O2 $CXXFLAGS" fi fi fi if test "$kde_use_debug_define" = "yes"; then CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" fi if test "$kde_use_profiling" = "yes"; then KDE_CHECK_COMPILER_FLAG(pg, [ CFLAGS="-pg $CFLAGS" CXXFLAGS="-pg $CXXFLAGS" ]) fi if test "$kde_use_warnings" = "yes"; then if test "$GCC" = "yes"; then case $host in *-*-linux-gnu) CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion $CXXFLAGS" ;; esac CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wbad-function-cast,[CXXFLAGS="-Wbad-function-cast $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) fi fi if test "$GCC" = "yes" && test "$kde_use_strict_options" = "yes"; then CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" fi if test "$GXX" = "yes"; then KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) fi if test "$CXX" = "KCC"; then dnl unfortunately we currently cannot disable exception support in KCC dnl because doing so is binary incompatible and Qt by default links with exceptions :-( dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], [ kde_use_pch=$enableval ],[kde_use_pch=no]) if test "$kde_use_pch" = "yes"; then dnl TODO: support --pch-dir! KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) dnl the below works (but the dir must exist), but it's dnl useless for a whole package. dnl The are precompiled headers for each source file, so when compiling dnl from scratch, it doesn't make a difference, and they take up dnl around ~5Mb _per_ sourcefile. dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) fi dnl this flag controls inlining. by default KCC inlines in optimisation mode dnl all implementations that are defined inside the class {} declaration. dnl because of templates-compatibility with broken gcc compilers, this dnl can cause excessive inlining. This flag limits it to a sane level KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) dnl Some source files are shared between multiple executables dnl (or libraries) and some of those need template instantiations. dnl In that case KCC needs to compile those sources with dnl --one_instantiation_per_object. To make it easy for us we compile dnl _all_ objects with that flag (--one_per is a shorthand). KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) fi AC_SUBST(USE_EXCEPTIONS) dnl obsolete macro - provided to keep things going USE_RTTI= AC_SUBST(USE_RTTI) case "$host" in *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; *-*-solaris*) if test "$GXX" = yes; then libstdcpp=`$CXX -print-file-name=libstdc++.so` if test ! -f $libstdcpp; then AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) fi fi ;; esac AC_VALIDIFY_CXXFLAGS AC_PROG_CXXCPP # the following is to allow programs, that are known to # have problems when compiled with -O2 if test -n "$CXXFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CXXFLAGS="" for i in $CXXFLAGS; do case $i in -O*) ;; *) NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test -n "$CFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CFLAGS="" for i in $CFLAGS; do case $i in -O*) ;; *) NOOPT_CFLAGS="$NOOPT_CFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test "x$kde_use_qt_emb" = "xyes"; then NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS -fno-rtti -DQWS" fi AC_SUBST(NOOPT_CXXFLAGS) AC_SUBST(NOOPT_CFLAGS) KDE_CHECK_FINAL ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) KDE_CXXFLAGS= AC_SUBST(KDE_CXXFLAGS) ]) AC_DEFUN(KDE_ADD_DEPENDENCIES, [ [A]M_DEPENDENCIES(CC) [A]M_DEPENDENCIES(CXX) ]) dnl just a wrapper to clean up configure.in AC_DEFUN(KDE_PROG_LIBTOOL, [ AC_REQUIRE([AC_CHECK_COMPILERS]) AC_REQUIRE([AC_ENABLE_SHARED]) AC_REQUIRE([AC_ENABLE_STATIC]) AC_REQUIRE([AC_LIBTOOL_DLOPEN]) AC_LANG_SAVE AC_LANG_C AC_OBJEXT AC_EXEEXT AC_LANG_RESTORE AM_PROG_LIBTOOL AC_LIBTOOL_CXX LIBTOOL_SHELL="/bin/sh ./libtool" # LIBTOOL="$LIBTOOL --silent" KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" AC_SUBST(KDE_PLUGIN) AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (experimental [only tested on linux/386])], kde_use_objprelink=$enableval, kde_use_objprelink=no) if test "x$kde_use_objprelink" = "xyes"; then KDE_FIND_PATH(objprelink, OBJPRELINK, [], [kde_use_objprelink=no]) if test "x$kde_use_objprelink" = "xyes"; then AC_MSG_CHECKING([Patching libtool to run objprelink.]) mv libtool libtool.orig cat > libtool <<\EOF #! /bin/sh for n ; do case $n in *.o) test -r $n && echo objprelink $n && objprelink $n ;; *.lo) m=`basename $n .lo`".o" && test -r $m && echo objprelink $m && objprelink $m m=".libs/$m" && test -r $m && echo objprelink $m && objprelink $m ;; esac; done EOF cat >> libtool libtool.orig rm libtool.orig chmod a+x libtool AC_MSG_RESULT(done) fi fi ]) AC_DEFUN(KDE_CHECK_TYPES, [ AC_CHECK_SIZEOF(int, 4)dnl AC_CHECK_SIZEOF(long, 4)dnl AC_CHECK_SIZEOF(char *, 4)dnl AC_CHECK_SIZEOF(char, 1)dnl ])dnl AC_DEFUN(KDE_DO_IT_ALL, [ AC_CANONICAL_SYSTEM AC_ARG_PROGRAM AM_INIT_AUTOMAKE($1, $2) AM_DISABLE_LIBRARIES AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) AC_CHECK_COMPILERS KDE_PROG_LIBTOOL AM_KDE_WITH_NLS AC_PATH_KDE ]) AC_DEFUN(AC_CHECK_RPATH, [ AC_MSG_CHECKING(for rpath) AC_ARG_ENABLE(rpath, [ --disable-rpath do not use the rpath feature of ld], USE_RPATH=$enableval, USE_RPATH=yes) if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then KDE_RPATH="-R \$(kde_libraries)" if test -n "$qt_libraries"; then KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" fi dnl $x_libraries is set to /usr/lib in case if test -n "$X_LDFLAGS"; then KDE_RPATH="$KDE_RPATH -R \$(x_libraries)" fi if test -n "$KDE_EXTRA_RPATH"; then KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" fi fi AC_SUBST(KDE_EXTRA_RPATH) AC_SUBST(KDE_RPATH) AC_MSG_RESULT($USE_RPATH) ]) dnl Check for the type of the third argument of getsockname AC_DEFUN(AC_CHECK_SOCKLEN_T, [ AC_MSG_CHECKING(for socklen_t) AC_CACHE_VAL(ac_cv_socklen_t, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include #include ],[ socklen_t a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=socklen_t, AC_TRY_COMPILE([ #include #include ],[ int a=0; getsockname(0,(struct sockaddr*)0, &a); ], ac_cv_socklen_t=int, ac_cv_socklen_t=size_t ) ) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_socklen_t) if test "$ac_cv_socklen_t" != "socklen_t"; then AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, [Define the real type of socklen_t]) fi AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) ]) dnl This is a merge of some macros out of the gettext aclocal.m4 dnl since we don't need anything, I took the things we need dnl the copyright for them is: dnl > dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. dnl This Makefile.in is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. dnl > dnl for this file it is relicensed under LGPL AC_DEFUN(AM_KDE_WITH_NLS, [ dnl If we use NLS figure out what method AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) GMSGFMT=":" fi MSGFMT=$GMSGFMT AC_SUBST(GMSGFMT) AC_SUBST(MSGFMT) AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext programs is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi AC_SUBST(XGETTEXT) ]) # Search path for a program which passes the given test. # Ulrich Drepper , 1996. # serial 1 # Stephan Kulow: I appended a _KDE against name conflicts dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test -n "[$]$1"; then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # serial 1 AC_DEFUN(AM_LC_MESSAGES, [if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) fi fi]) dnl From Jim Meyering. dnl FIXME: migrate into libit. AC_DEFUN([AM_FUNC_OBSTACK], [AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, [AC_TRY_LINK([#include "obstack.h"], [struct obstack *mem;obstack_free(mem,(char *) 0)], am_cv_func_obstack=yes, am_cv_func_obstack=no)]) if test $am_cv_func_obstack = yes; then AC_DEFINE(HAVE_OBSTACK) else LIBOBJS="$LIBOBJS obstack.o" fi ]) dnl From Jim Meyering. Use this if you use the GNU error.[ch]. dnl FIXME: Migrate into libit AC_DEFUN([AM_FUNC_ERROR_AT_LINE], [AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], am_cv_lib_error_at_line=yes, am_cv_lib_error_at_line=no)]) if test $am_cv_lib_error_at_line = no; then LIBOBJS="$LIBOBJS error.o" fi AC_SUBST(LIBOBJS)dnl ]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995. # serial 1 # Stephan Kulow: I put a KDE in it to avoid name conflicts AC_DEFUN(AM_KDE_GNU_GETTEXT, [AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_REQUIRE([AM_KDE_WITH_NLS])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h string.h values.h alloca.h]) AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ __argz_count __argz_stringify __argz_next]) AC_MSG_CHECKING(for stpcpy) AC_CACHE_VAL(kde_cv_func_stpcpy, [ kde_safe_cxxflags=$CXXFLAGS CXXFLAGS="-Wmissing-prototypes -Werror" AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ #include ], [ char buffer[200]; stpcpy(buffer, buffer); ], kde_cv_func_stpcpy=yes, kde_cv_func_stpcpy=no) AC_LANG_RESTORE CXXFLAGS=$kde_safe_cxxflags ]) AC_MSG_RESULT($kde_cv_func_stpcpy) if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) fi AM_LC_MESSAGES if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; esac done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi ]) AC_DEFUN(AC_HAVE_XPM, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= test -z "$XPM_INCLUDE" && XPM_INCLUDE= AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], xpm_test=$withval, xpm_test="yes") if test "x$xpm_test" = xno; then ac_cv_have_xpm=no else AC_MSG_CHECKING(for XPM) AC_CACHE_VAL(ac_cv_have_xpm, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" if test "x$kde_use_qt_emb" != "xyes"; then LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" else LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" fi CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" AC_TRY_LINK([#include ],[], ac_cv_have_xpm="yes",ac_cv_have_xpm="no") LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_xpm" = no; then AC_MSG_RESULT(no) XPM_LDFLAGS="" XPMINC="" $2 else AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) if test "$XPM_LDFLAGS" = ""; then XPMLIB='-lXpm $(LIB_X11)' else XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' fi if test "$XPM_INCLUDE" = ""; then XPMINC="" else XPMINC="-I$XPM_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(XPMINC) AC_SUBST(XPMLIB) ]) AC_DEFUN(AC_HAVE_DPMS, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= DPMS_LIB= AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], dpms_test=$withval, dpms_test="yes") if test "x$dpms_test" = xno; then ac_cv_have_dpms=no else AC_MSG_CHECKING(for DPMS) dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". AC_CACHE_VAL(ac_cv_have_dpms, [ if test "x$kde_use_qt_emb" = "xyes"; then AC_MSG_RESULT(no) ac_cv_have_dpms="no" else AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" ac_save_libs="$LIBS" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], ac_cv_have_dpms="yes", [ LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" LIBS="$LIBS -lXdpms" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" AC_TRY_LINK([ #include #include #include #include int foo_test_dpms() { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], [ ac_cv_have_dpms="-lXdpms" ],ac_cv_have_dpms="no") ]) LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" LIBS="$ac_save_libs" fi ])dnl if test "$ac_cv_have_dpms" = no; then AC_MSG_RESULT(no) DPMS_LDFLAGS="" DPMSINC="" $2 else AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) if test "$ac_cv_have_dpms" = "-lXdpms"; then DPMS_LIB="-lXdpms" fi if test "$DPMS_LDFLAGS" = ""; then DPMSLIB="$DPMS_LIB "'$(LIB_X11)' else DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' fi if test "$DPMS_INCLUDE" = ""; then DPMSINC="" else DPMSINC="-I$DPMS_INCLUDE" fi AC_MSG_RESULT(yes) $1 fi fi AC_SUBST(DPMSINC) AC_SUBST(DPMSLIB) ]) AC_DEFUN(AC_HAVE_GL, [AC_REQUIRE_CPP()dnl AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) test -z "$GL_LDFLAGS" && GL_LDFLAGS= test -z "$GL_INCLUDE" && GL_INCLUDE= AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], gl_test=$withval, gl_test="yes") if test "x$kde_use_qt_emb" = "xyes"; then # GL and Qt Embedded is a no-go for now. ac_cv_have_gl=no elif test "x$gl_test" = xno; then ac_cv_have_gl=no else AC_MSG_CHECKING(for GL) AC_CACHE_VAL(ac_cv_have_gl, [ AC_LANG_C ac_save_ldflags="$LDFLAGS" ac_save_cflags="$CFLAGS" LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$CFLAGS $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="mesa", ac_cv_have_gl="no") if test "x$ac_cv_have_gl" = "xno"; then LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGL -lGLU" test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" CFLAGS="$ac_save_cflags $X_INCLUDES" test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" AC_TRY_LINK([#include #include ], [], ac_cv_have_gl="yes", ac_cv_have_gl="no") fi LDFLAGS="$ac_save_ldflags" CFLAGS="$ac_save_cflags" ])dnl if test "$ac_cv_have_gl" = "no"; then AC_MSG_RESULT(no) GL_LDFLAGS="" GLINC="" $2 else AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) if test "$GL_LDFLAGS" = ""; then if test "$ac_cv_have_gl" = "mesa"; then GLLIB='-lMesaGL -lMesaGLU $(LIB_X11)' else GLLIB='-lGL -lGLU $(LIB_X11)' fi else if test "$ac_cv_have_gl" = "mesa"; then GLLIB="$GL_LDFLAGS -lMesaGL -lMesaGLU "'$(LIB_X11)' else GLLIB="$GL_LDFLAGS -lGL -lGLU "'$(LIB_X11)' fi fi if test "$GL_INCLUDE" = ""; then GLINC="" else GLINC="-I$GL_INCLUDE" fi AC_MSG_RESULT($ac_cv_have_gl) $1 fi fi AC_SUBST(GLINC) AC_SUBST(GLLIB) ]) dnl shadow password and PAM magic - maintained by ossi@kde.org AC_DEFUN(KDE_PAM, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_ARG_WITH(pam, [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], [ if test "x$withval" = "xyes"; then use_pam=yes pam_service=kde elif test "x$withval" = "xno"; then use_pam=no else use_pam=yes pam_service=$withval fi ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ], [ AC_CACHE_VAL(ac_cv_path_pam, [ use_pam=no AC_CHECK_LIB(pam, pam_start, [ AC_CHECK_HEADER(security/pam_appl.h, [ use_pam=yes pam_service=kde ]) ], , $LIBDL) ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" ]) ]) eval "$ac_cv_path_pam" AC_MSG_CHECKING(for PAM) if test "x$use_pam" = xno; then AC_MSG_RESULT(no) PAMLIBS="" else AC_MSG_RESULT(yes) AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" dnl test whether struct pam_message is const (Linux) or not (Sun) AC_MSG_CHECKING(for const pam_message) AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, [AC_MSG_RESULT([const: Linux-type PAM])], [AC_MSG_RESULT([nonconst: Sun-type PAM]) AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] )], [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) fi AC_SUBST(PAMLIBS) ]) dnl DEF_PAM_SERVICE(arg name, full name, define name) AC_DEFUN(DEF_PAM_SERVICE, [ AC_ARG_WITH($1-pam, [ --with-$1-pam=[val] override PAM service from --with-pam for $2], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$withval" else AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. You may want to enforce it by using --with-pam.]) fi ], [ if test "x$use_pam" = xyes; then $3_PAM_SERVICE="$pam_service" fi ]) if test -n "$$3_PAM_SERVICE"; then AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) fi AC_SUBST($3_PAM_SERVICE) ]) AC_DEFUN(KDE_SHADOWPASSWD, [ AC_REQUIRE([KDE_PAM]) AC_CHECK_LIB(shadow, getspent, [ LIBSHADOW="-lshadow" ac_use_shadow=yes ], [ dnl for UnixWare AC_CHECK_LIB(gen, getspent, [ LIBGEN="-lgen" ac_use_shadow=yes ], [ AC_CHECK_FUNC(getspent, [ ac_use_shadow=yes ], [ ac_use_shadow=no ]) ]) ]) AC_SUBST(LIBSHADOW) AC_SUBST(LIBGEN) AC_MSG_CHECKING([for shadow passwords]) AC_ARG_WITH(shadow, [ --with-shadow If you want shadow password support ], [ if test "x$withval" != "xno"; then use_shadow=yes else use_shadow=no fi ], [ use_shadow="$ac_use_shadow" ]) if test "x$use_shadow" = xyes; then AC_MSG_RESULT(yes) AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) else AC_MSG_RESULT(no) LIBSHADOW= LIBGEN= fi dnl finally make the relevant binaries setuid root, if we have shadow passwds. dnl this still applies, if we could use it indirectly through pam. if test "x$use_shadow" = xyes || ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then case $host in *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) SETUIDFLAGS="-m 4755 -o root";; *) SETUIDFLAGS="-m 4755";; esac fi AC_SUBST(SETUIDFLAGS) ]) AC_DEFUN(KDE_PASSWDLIBS, [ AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT AC_REQUIRE([KDE_PAM]) AC_REQUIRE([KDE_SHADOWPASSWD]) if test "x$use_pam" = "xyes"; then PASSWDLIBS="$PAMLIBS" else PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" fi dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires dnl root to read, so kcheckpass needs to be root (even when using pam, since pam dnl may need to read /etc/master.passwd). case $host in *-*-freebsd*) SETUIDFLAGS="-m 4755 -o root" ;; *) ;; esac AC_SUBST(PASSWDLIBS) ]) AC_DEFUN(KDE_CHECK_LIBDL, [ AC_CHECK_LIB(dl, dlopen, [ LIBDL="-ldl" ac_cv_have_dlfcn=yes ]) AC_CHECK_LIB(dld, shl_unload, [ LIBDL="-ldld" ac_cv_have_shload=yes ]) AC_SUBST(LIBDL) ]) AC_DEFUN(KDE_CHECK_DLOPEN, [ KDE_CHECK_LIBDL AC_CHECK_HEADERS(dlfcn.h dl.h) if test "$ac_cv_header_dlfcn_h" = "no"; then ac_cv_have_dlfcn=no fi if test "$ac_cv_header_dl_h" = "no"; then ac_cv_have_shload=no fi dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE dnl (MM) AC_ARG_ENABLE(dlopen, [ --disable-dlopen link statically [default=no]] , enable_dlopen=$enableval, enable_dlopen=yes) # override the user's opinion, if we know it better ;) if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then enable_dlopen=no fi if test "$ac_cv_have_dlfcn" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) fi if test "$ac_cv_have_shload" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) fi if test "$enable_dlopen" = no ; then test -n "$1" && eval $1 else test -n "$2" && eval $2 fi ]) AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, [ KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) KDE_PROG_LIBTOOL AC_MSG_CHECKING([dynamic loading]) eval "`egrep '^build_libtool_libs=' libtool`" if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then dynamic_loading=yes AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) else dynamic_loading=no fi AC_MSG_RESULT($dynamic_loading) if test "$dynamic_loading" = "yes"; then $1 else $2 fi ]) AC_DEFUN(KDE_ADD_INCLUDES, [ if test -z "$1"; then test_include="Pix.h" else test_include="$1" fi AC_MSG_CHECKING([for libg++ ($test_include)]) AC_CACHE_VAL(kde_cv_libgpp_includes, [ kde_cv_libgpp_includes=no for ac_dir in \ \ /usr/include/g++ \ /usr/include \ /usr/unsupported/include \ /opt/include \ $extra_include \ ; \ do if test -r "$ac_dir/$test_include"; then kde_cv_libgpp_includes=$ac_dir break fi done ]) AC_MSG_RESULT($kde_cv_libgpp_includes) if test "$kde_cv_libgpp_includes" != "no"; then all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" fi ]) ]) AC_DEFUN(KDE_CHECK_MICO, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_MISC_TESTS]) AC_MSG_CHECKING(for MICO) if test -z "$MICODIR"; then kde_micodir=/usr/local else kde_micodir="$MICODIR" fi AC_ARG_WITH(micodir, [ --with-micodir=micodir where mico is installed ], kde_micodir=$withval, kde_micodir=$kde_micodir ) AC_CACHE_VAL(kde_cv_mico_incdir, [ mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) ]) kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` if test ! -r $kde_micodir/include/CORBA.h; then AC_MSG_ERROR([No CORBA.h found, specify another micodir]) fi AC_MSG_RESULT($kde_micodir) MICO_INCLUDES=-I$kde_micodir/include AC_SUBST(MICO_INCLUDES) MICO_LDFLAGS=-L$kde_micodir/lib AC_SUBST(MICO_LDFLAGS) micodir=$kde_micodir AC_SUBST(micodir) AC_MSG_CHECKING([for MICO version]) AC_CACHE_VAL(kde_cv_mico_version, [ AC_LANG_C cat >conftest.$ac_ext < #include int main() { printf("MICO_VERSION=%s\n",MICO_VERSION); return (0); } EOF ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' if AC_TRY_EVAL(ac_compile); then if eval `./conftest 2>&5`; then kde_cv_mico_version=$MICO_VERSION else AC_MSG_ERROR([your system is not able to execute a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi else AC_MSG_ERROR([your system is not able to compile a small application to find MICO version! Check $kde_micodir/include/mico/version.h]) fi ]) dnl installed MICO version mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "x$1" = "x"; then req_version="2.3.0" else req_version=$1 fi dnl required MICO version req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` if test "$mico_v_maj" -lt "$req_v_maj" || \ ( test "$mico_v_maj" -eq "$req_v_maj" && \ test "$mico_v_mid" -lt "$req_v_mid" ) || \ ( test "$mico_v_mid" -eq "$req_v_mid" && \ test "$mico_v_min" -lt "$req_v_min" ) then AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ at least is required. You should upgrade MICO.]) else AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) fi LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" AC_SUBST(LIBMICO) if test -z "$IDL"; then IDL='$(kde_bindir)/cuteidl' fi AC_SUBST(IDL) IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' AC_SUBST(IDL_DEPENDENCIES) idldir="\$(includedir)/idl" AC_SUBST(idldir) ]) AC_DEFUN(KDE_CHECK_MINI_STL, [ AC_REQUIRE([KDE_CHECK_MICO]) AC_MSG_CHECKING(if we use mico's mini-STL) AC_CACHE_VAL(kde_cv_have_mini_stl, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS kde_save_cxxflags="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" AC_TRY_COMPILE( [ #include ], [ #ifdef HAVE_MINI_STL #error "nothing" #endif ], kde_cv_have_mini_stl=no, kde_cv_have_mini_stl=yes) CXXFLAGS="$kde_save_cxxflags" AC_LANG_RESTORE ]) if test "x$kde_cv_have_mini_stl" = "xyes"; then AC_MSG_RESULT(yes) $1 else AC_MSG_RESULT(no) $2 fi ]) ]) AC_DEFUN(KDE_CHECK_LIBPTHREAD, [ AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, [ AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], kde_use_kernthreads=$enableval, kde_use_kernthreads=no) if test "$kde_use_kernthreads" = "yes"; then ac_save_CXXFLAGS="$CXXFLAGS" ac_save_CFLAGS="$CFLAGS" CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) CXXFLAGS="$ac_save_CXXFLAGS" CFLAGS="$ac_save_CFLAGS" if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then kde_use_kernthreads=no else dnl Add proper -I and -l statements AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD if test "x$LIBPTHREAD" = "x"; then kde_use_kernthreads=no else USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" fi fi else USE_THREADS="" if test -z "$LIBPTHREAD"; then KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) fi fi case $host_os in solaris*) KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" ;; freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;; aix*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" LIBPTHREAD="$LIBPTHREAD -lc_r" ;; linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" if test "$CXX" = "KCC"; then CXXFLAGS="$CXXFLAGS --thread_safe" NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" fi ;; *) ;; esac AC_SUBST(USE_THREADS) AC_SUBST(LIBPTHREAD) ]) AC_DEFUN(KDE_CHECK_THREADING, [ AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) dnl default is yes if libpthread is found and no if no libpthread is available if test -z "$LIBPTHREAD"; then if test -z "$USE_THREADS"; then kde_check_threading_default=no else kde_check_threading_default=yes fi else kde_check_threading_default=yes fi AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) if test "x$kde_use_threading" = "xyes"; then AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) fi ]) AC_DEFUN(KDE_TRY_LINK_PYTHON, [ if test "$kde_python_link_found" = no; then if test "$1" = normal; then AC_MSG_CHECKING(if a Python application links) else AC_MSG_CHECKING(if Python depends on $2) fi AC_CACHE_VAL(kde_cv_try_link_python_$1, [ AC_LANG_SAVE AC_LANG_C kde_save_cflags="$CFLAGS" CFLAGS="$CFLAGS $PYTHONINC" kde_save_libs="$LIBS" LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" kde_save_ldflags="$LDFLAGS" LDFLAGS="$LDFLAGS $PYTHONLIB" AC_TRY_LINK( [ #include ],[ PySys_SetArgv(1, 0); ], [kde_cv_try_link_python_$1=yes], [kde_cv_try_link_python_$1=no] ) CFLAGS="$kde_save_cflags" LIBS="$kde_save_libs" LDFLAGS="$kde_save_ldflags" ]) if test "$kde_cv_try_link_python_$1" = "yes"; then AC_MSG_RESULT(yes) kde_python_link_found=yes if test ! "$1" = normal; then LIBPYTHON="$LIBPYTHON $2" fi $3 else AC_MSG_RESULT(no) $4 fi AC_LANG_RESTORE fi ]) AC_DEFUN(KDE_CHECK_PYTHON_DIR, [ AC_MSG_CHECKING([for Python directory]) AC_CACHE_VAL(kde_cv_pythondir, [ if test -z "$PYTHONDIR"; then kde_cv_pythondir=/usr/local else kde_cv_pythondir="$PYTHONDIR" fi ]) AC_ARG_WITH(pythondir, [ --with-pythondir=pythondir use python installed in pythondir ], [ ac_python_dir=$withval ], ac_python_dir=$kde_cv_pythondir ) AC_MSG_RESULT($ac_python_dir) ]) AC_DEFUN(KDE_CHECK_PYTHON_INTERN, [ AC_REQUIRE([KDE_CHECK_LIBDL]) AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) if test -z "$1"; then version="1.5" else version="$1" fi AC_MSG_CHECKING([for Python$version]) python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) if test ! -r $python_incdir/Python.h; then AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) python_incdir=$python_incdir/python$version if test ! -r $python_incdir/Python.h; then python_incdir=no fi fi PYTHONINC=-I$python_incdir python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) if test ! -r $python_libdir/libpython$version.a; then AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) python_libdir=$python_libdir/python$version/config if test ! -r $python_libdir/libpython$version.a; then python_libdir=no fi fi PYTHONLIB=-L$python_libdir kde_orig_LIBPYTHON=$LIBPYTHON if test -z "$LIBPYTHON"; then LIBPYTHON=-lpython$version fi python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) python_moddir=$python_moddir/python$version if test ! -r $python_moddir/copy.py; then python_moddir=no fi PYTHONMODDIR=$python_moddir AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then LIBPYTHON=$kde_orig_LIBPYTHON test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" $2 else dnl Note: this test is very weak kde_python_link_found=no KDE_TRY_LINK_PYTHON(normal) KDE_TRY_LINK_PYTHON(m, -lm) KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) KDE_TRY_LINK_PYTHON(tcl, -ltcl) KDE_TRY_LINK_PYTHON(db2, -ldb2) KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], [AC_MSG_WARN([it seems, Python depends on another library. Pleae set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this and contact the authors to let them know about this problem]) ]) LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" AC_SUBST(PYTHONINC) AC_SUBST(PYTHONLIB) AC_SUBST(LIBPYTHON) AC_SUBST(PYTHONMODDIR) AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) fi ]) AC_DEFUN(KDE_CHECK_PYTHON, [ KDE_CHECK_PYTHON_INTERN("2.2", [KDE_CHECK_PYTHON_INTERN("2.1", [KDE_CHECK_PYTHON_INTERN("2.0", [ KDE_CHECK_PYTHON_INTERN($1, $2) ]) ])]) ]) AC_DEFUN(KDE_CHECK_STL_SGI, [ AC_MSG_CHECKING([if STL implementation is SGI like]) AC_CACHE_VAL(kde_cv_stl_type_sgi, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hallo Welt."; astring.erase(0, 6); // now astring is "Welt" return 0; ], kde_cv_stl_type_sgi=yes, kde_cv_stl_type_sgi=no) ]) AC_MSG_RESULT($kde_cv_stl_type_sgi) if test "$kde_cv_stl_type_sgi" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) fi ]) AC_DEFUN(KDE_CHECK_STL_HP, [ AC_MSG_CHECKING([if STL implementation is HP like]) AC_CACHE_VAL(kde_cv_stl_type_hp, [ AC_TRY_COMPILE([ #include using namespace std; ],[ string astring="Hello World"; astring.remove(0, 6); // now astring is "World" return 0; ], kde_cv_stl_type_hp=yes, kde_cv_stl_type_hp=no) ]) AC_MSG_RESULT($kde_cv_stl_type_hp) if test "$kde_cv_stl_type_hp" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) fi ]) AC_DEFUN(KDE_CHECK_STL, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" KDE_CHECK_STL_SGI if test "$kde_cv_stl_type_sgi" = "no"; then KDE_CHECK_STL_HP if test "$kde_cv_stl_type_hp" = "no"; then AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") fi fi CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ]) AC_DEFUN(AC_FIND_QIMGIO, [AC_REQUIRE([AC_FIND_JPEG]) AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) AC_MSG_CHECKING([for qimgio]) AC_CACHE_VAL(ac_cv_lib_qimgio, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_save_LIBS="$LIBS" ac_save_CXXFLAGS="$CXXFLAGS" LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" AC_TRY_RUN(dnl [ #include #include int main() { QString t = "hallo"; t.fill('t'); qInitImageIO(); } ], ac_cv_lib_qimgio=yes, ac_cv_lib_qimgio=no, ac_cv_lib_qimgio=no) LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" AC_LANG_RESTORE ])dnl if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" AC_MSG_RESULT(yes) AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) AC_SUBST(LIBQIMGIO) else AC_MSG_RESULT(not found) fi ]) AC_DEFUN(KDE_CHECK_ANSI, [ ]) AC_DEFUN(KDE_CHECK_INSURE, [ AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], [ if test $enableval = "no"; dnl then ac_use_insure="no" else ac_use_insure="yes" fi ], [ac_use_insure="no"]) AC_MSG_CHECKING(if we will use Insure++ to debug) AC_MSG_RESULT($ac_use_insure) if test "$ac_use_insure" = "yes"; dnl then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? fi ]) AC_DEFUN(AM_DISABLE_LIBRARIES, [ AC_PROVIDE([AM_ENABLE_STATIC]) AC_PROVIDE([AM_ENABLE_SHARED]) enable_static=no enable_shared=yes ]) AC_DEFUN(AC_CHECK_UTMP_FILE, [ AC_MSG_CHECKING([for utmp file]) AC_CACHE_VAL(kde_cv_utmp_file, [ kde_cv_utmp_file=no for ac_file in \ \ /var/run/utmp \ /var/adm/utmp \ /etc/utmp \ ; \ do if test -r "$ac_file"; then kde_cv_utmp_file=$ac_file break fi done ]) if test "$kde_cv_utmp_file" != "no"; then AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) $1 AC_MSG_RESULT($kde_cv_utmp_file) else $2 AC_MSG_RESULT([non found]) fi ]) AC_DEFUN(KDE_CREATE_SUBDIRSLIST, [ DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" if test ! -s $srcdir/subdirs; then dnl Note: Makefile.common creates subdirs, so this is just a fallback TOPSUBDIRS="" files=`cd $srcdir && ls -1` dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` for i in $dirs; do echo $i >> $srcdir/subdirs done fi if test -s $srcdir/inst-apps; then ac_topsubdirs="`cat $srcdir/inst-apps`" else ac_topsubdirs="`cat $srcdir/subdirs`" fi for i in $ac_topsubdirs; do AC_MSG_CHECKING([if $i should be compiled]) if test -d $srcdir/$i; then install_it="yes" for j in $DO_NOT_COMPILE; do if test $i = $j; then install_it="no" fi done else install_it="no" fi AC_MSG_RESULT($install_it) if test $install_it = "yes"; then TOPSUBDIRS="$TOPSUBDIRS $i" fi done AC_SUBST(TOPSUBDIRS) ]) AC_DEFUN(KDE_CHECK_NAMESPACES, [ AC_MSG_CHECKING(whether C++ compiler supports namespaces) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_COMPILE([ ], [ namespace Foo { extern int i; namespace Bar { extern int i; } } int Foo::i = 0; int Foo::Bar::i = 1; ],[ AC_MSG_RESULT(yes) AC_DEFINE(HAVE_NAMESPACES) ], [ AC_MSG_RESULT(no) ]) AC_LANG_RESTORE ]) AC_DEFUN(KDE_CHECK_NEWLIBS, [ ]) dnl ------------------------------------------------------------------------ dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_S_ISSOCK, [ AC_MSG_CHECKING(for S_ISSOCK) AC_CACHE_VAL(ac_cv_have_s_issock, [ AC_LANG_SAVE AC_LANG_C AC_TRY_LINK( [ #include ], [ struct stat buff; int b = S_ISSOCK( buff.st_mode ); ], ac_cv_have_s_issock=yes, ac_cv_have_s_issock=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($ac_cv_have_s_issock) if test "$ac_cv_have_s_issock" = "yes"; then AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) fi ]) dnl ------------------------------------------------------------------------ dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org dnl ------------------------------------------------------------------------ dnl AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, [ AC_MSG_CHECKING(for MAXPATHLEN) AC_CACHE_VAL(ac_cv_maxpathlen, [ AC_LANG_C cat > conftest.$ac_ext < #endif #include #include #ifndef MAXPATHLEN #define MAXPATHLEN 1024 #endif KDE_HELLO MAXPATHLEN EOF ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" if AC_TRY_EVAL(ac_try) && test -s conftest.out; then ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` else ac_cv_maxpathlen=1024 fi rm conftest.* ]) AC_MSG_RESULT($ac_cv_maxpathlen) AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) ]) dnl ------------------------------------------------------------------------- dnl See if the compiler supports a template repository bero@redhat.de dnl ------------------------------------------------------------------------- AC_DEFUN(KDE_COMPILER_REPO, [ REPO="" NOREPO="" KDE_CHECK_COMPILER_FLAG(frepo, [ REPO="-frepo" NOREPO="-fno-repo" ]) if test -z "$REPO"; then KDE_CHECK_COMPILER_FLAG(instances=explicit, [ REPO="-instances=explicit" NOREPO="-instances=extern" ]) fi if test -n "$REPO"; then AC_DEFINE_UNQUOTED(HAVE_TEMPLATE_REPOSITORY, 1, [C++ compiler supports template repository]) $1 fi AC_SUBST(REPO) AC_SUBST(NOREPO) ]) AC_DEFUN(KDE_CHECK_HEADER, [ AC_LANG_SAVE kde_safe_cppflags=$CPPFLAGS CPPFLAGS="$CPPFLAGS $all_includes" AC_LANG_CPLUSPLUS AC_CHECK_HEADER($1, $2, $3) CPPFLAGS=$kde_safe_cppflags AC_LANG_RESTORE ]) AC_DEFUN(KDE_FAST_CONFIGURE, [ dnl makes configure fast (needs perl) AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], with_fast_perl=$enableval, with_fast_perl=yes) ]) AC_DEFUN(KDE_CONF_FILES, [ val= if test -f $srcdir/configure.files ; then val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` fi CONF_FILES= if test -n "$val" ; then for i in $val ; do CONF_FILES="$CONF_FILES $i" done fi AC_SUBST(CONF_FILES) ])dnl AC_DEFUN(KDE_SET_PREFIX, [ unset CDPATH dnl make $KDEDIR the default for the installation AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix ac_configure_args="$ac_configure_args --prefix=$prefix" fi KDE_FAST_CONFIGURE KDE_CONF_FILES ]) pushdef([AC_PROG_INSTALL], [ dnl our own version, testing for a -p flag popdef([AC_PROG_INSTALL]) dnl as AC_PROG_INSTALL works as it works we first have dnl to save if the user didn't specify INSTALL, as the dnl autoconf one overwrites INSTALL and we have no chance to find dnl out afterwards test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT AC_PROG_INSTALL if test -z "$kde_save_INSTALL_given" ; then # OK, user hasn't given any INSTALL, autoconf found one for us # now we test, if it supports the -p flag AC_MSG_CHECKING(for -p flag to install) rm -f confinst.$$.* > /dev/null 2>&1 echo "Testtest" > confinst.$$.orig ac_res=no if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then if test -f confinst.$$.new ; then # OK, -p seems to do no harm to install INSTALL="${INSTALL} -p" ac_res=yes fi fi rm -f confinst.$$.* AC_MSG_RESULT($ac_res) fi dnl the following tries to resolve some signs and wonders coming up dnl with different autoconf/automake versions dnl e.g.: dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the dnl install-@DIR@PROGRAMS targets to explicitly use that flag dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from dnl automake (due to broken Makefile.am or whatever) to install programs, dnl and so does not see the -s flag in automake > 1.4 dnl to clean up that mess we: dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG dnl which cleans KDE's program with automake > 1.4; dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems dnl with automake<=1.4 dnl note that dues to this sometimes two '-s' flags are used (if KDE dnl properly uses install-@DIR@PROGRAMS, but I don't care dnl dnl And to all this comes, that I even can't write in comments variable dnl names used by automake, because it is so stupid to think I wanted to dnl _use_ them, therefor I have written A_M_... instead of AM_ dnl hmm, I wanted to say something ... ahh yes: Arghhh. if test -z "$kde_save_INSTALL_PROGRAM_given" ; then INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' fi if test -z "$kde_save_INSTALL_SCRIPT_given" ; then INSTALL_SCRIPT='${INSTALL}' fi ])dnl AC_DEFUN(KDE_LANG_CPLUSPLUS, [AC_LANG_CPLUSPLUS ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) ]) pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS ]) AC_DEFUN(KDE_CHECK_LONG_LONG, [ AC_MSG_CHECKING(for long long) AC_CACHE_VAL(kde_cv_c_long_long, [ AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_TRY_LINK([], [ long long foo = 0; foo = foo+1; ], kde_cv_c_long_long=yes, kde_cv_c_long_long=no) AC_LANG_RESTORE ]) AC_MSG_RESULT($kde_cv_c_long_long) if test "$kde_cv_c_long_long" = yes; then AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) fi ]) AC_DEFUN(KDE_CHECK_LIB, [ kde_save_LDFLAGS="$LDFLAGS" dnl AC_CHECK_LIB modifies LIBS, so save it here kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $all_libraries" case $host_os in aix*) LDFLAGS="-brtl $LDFLAGS" test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" ;; esac AC_CHECK_LIB($1, $2, $3, $4, $5) LDFLAGS="$kde_save_LDFLAGS" LIBS="$kde_save_LIBS" ]) AC_DEFUN(KDE_CHECK_INITGROUPS, [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_CHECK_FUNCS(initgroups) if test "x$ac_cv_func_initgroups" = "xyes"; then case $host_os in aix*) AC_LANG_SAVE AC_LANG_CPLUSPLUS AC_MSG_CHECKING([for initgroups prototype]) AC_CACHE_VAL(kde_cv_check_initgroups_proto, [ AC_TRY_COMPILE( [ #include ], [ char buffer[10]; gid_t id; int x = initgroups(buffer,id); ], kde_cv_check_initgroups_proto=yes, kde_cv_check_initgroups_proto=no) ]) AC_MSG_RESULT($kde_cv_check_initgroups_proto) AC_LANG_RESTORE ;; *) kde_cv_check_initgroups_proto=yes ;; esac else kde_cv_check_initgroups_proto=no fi if test "x$kde_cv_check_initgroups_proto" = "xyes"; then kde_check_initgroups_proto=1 else kde_check_initgroups_proto=0 fi AC_DEFINE_UNQUOTED(HAVE_INITGROUPS_PROTO,$kde_check_initgroups_proto, [initgroups may exist but not its prototype (e.g. AIX<4.3.3:8)]) ]) AC_DEFUN(KDE_CHECK_JAVA_DIR, [ AC_MSG_CHECKING([for Java directory]) AC_ARG_WITH(java, [ --with-java=javadir use java installed in javadir, --without-java disables ], [ ac_java_dir=$withval ], ac_java_dir="" ) dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH if test "x$ac_java_dir" = "xno"; then kde_cv_java_bindir=no kde_cv_java_includedir=no kde_java_libjvmdir=no kde_java_libhpidir=no else if test "x$ac_java_dir" = "x"; then dnl No option set -> look in $PATH AC_CACHE_VAL(kde_cv_java_bindir, [ dnl First look for javac in $PATH. If not found we'll look at the option. KDE_FIND_PATH(javac, JAVAC, [], []) if test -n "$JAVAC"; then kde_cv_java_bindir=`echo $JAVAC | sed -e 's,/javac$,/,'` dnl this substitution might not work - well, we test for jni.h below kde_cv_java_includedir=`echo $kde_cv_java_bindir | sed -e 's,bin/$,include/,'` else kde_cv_java_bindir=no fi ]) else dnl config option set kde_cv_java_bindir=$ac_java_dir/bin kde_cv_java_includedir=$ac_java_dir/include fi fi dnl At this point kde_cv_java_bindir and kde_cv_java_includedir are either set or "no" if test "x$kde_cv_java_bindir" != "xno"; then dnl Look for libjvm.so kde_java_libjvmdir=`find $kde_cv_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` dnl Look for libhpi.so and avoid green threads kde_java_libhpidir=`find $kde_cv_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,'` dnl Now check everything's fine under there if test ! -x "$kde_cv_java_bindir/javac"; then AC_MSG_ERROR([javac not found under $kde_cv_java_bindir - it seems you passed a wrong --with-java.]) fi if test ! -x "$kde_cv_java_bindir/javah"; then AC_MSG_ERROR([javah not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -x "$kde_cv_java_bindir/jar"; then AC_MSG_ERROR([jar not found under $kde_cv_java_bindir. javac was found though! Use --with-java or --without-java.]) fi if test ! -r "$kde_cv_java_includedir/jni.h"; then AC_MSG_ERROR([jni.h not found under $kde_cv_java_includedir. Use --with-java or --without-java.]) fi if test ! -r "$kde_java_libjvmdir/libjvm.so"; then AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) fi if test ! -r "$kde_java_libhpidir/libhpi.so"; then AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) fi jni_includes="-I$kde_cv_java_includedir" dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. dnl and under linux here.. test -d "$kde_cv_java_includedir/linux" && jni_includes="$jni_includes -I$kde_cv_java_includedir/linux" test -d "$kde_cv_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_cv_java_includedir/genunix" dnl Check for JNI version AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" AC_TRY_COMPILE([ #include ], [ #ifndef JNI_VERSION_1_2 Syntax Error #endif ],[ kde_jni_works=yes ], [ kde_jni_works=no ]) if test $kde_jni_works = no; then AC_MSG_ERROR([Incorrect version of $kde_cv_java_includedir/jni.h. You need to have Java Development Kit (JDK) version 1.2. Use --with-java to specify another location. Use --without-java to configure without java support. Or download a newer JDK and try again. See e.g. http://java.sun.com/products/jdk/1.2 ]) fi CXXFLAGS="$ac_cxxflags_safe" AC_LANG_RESTORE dnl All tests ok, inform and subst the variables AC_MSG_RESULT([javac/javah/jar in $kde_cv_java_bindir, jni.h in $kde_cv_java_includedir]) JAVAC=$kde_cv_java_bindir/javac AC_SUBST(JAVAC) JAVAH=$kde_cv_java_bindir/javah AC_SUBST(JAVAH) JAR=$kde_cv_java_bindir/jar AC_SUBST(JAR) AC_SUBST(jni_includes) JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" AC_SUBST(JVMLIBS) fi ]) dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. dnl When the argument list becomes big, as in KDE for AC_OUTPUT in dnl big packages, m4_foreach is dog-slow. So use our own version of dnl it. (matz@kde.org) m4_define([mm_foreach], [m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) m4_define([mm_car], [[$1]]) m4_define([mm_car2], [[$@]]) m4_define([_mm_foreach], [m4_if(m4_quote($2), [], [], [m4_define([$1], [mm_car($2)])$3[]_mm_foreach([$1], mm_car2(m4_shift($2)), [$3])])]) m4_define([AC_FOREACH], [mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) AC_DEFUN(KDE_NEED_FLEX, [ kde_libs_safe=$LIBS LIBS="$LIBS $USER_LDFLAGS" AM_PROG_LEX LIBS=$kde_libs_safe if test -z "$LEXLIB"; then AC_MSG_ERROR([You need to have flex installed.]) fi AC_SUBST(LEXLIB) ]) AC_DEFUN(AC_PATH_QTOPIA, [ dnl TODO: use AC_CACHE_VAL if test -z "$1"; then qtopia_minver_maj=1 qtopia_minver_min=5 qtopia_minver_pat=0 else qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` fi qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" AC_REQUIRE([AC_PATH_QT]) AC_MSG_CHECKING([for Qtopia]) LIB_QTOPIA="-lqpe" AC_SUBST(LIB_QTOPIA) kde_qtopia_dirs="$QPEDIR /opt/Qtopia" ac_qtopia_incdir=NO AC_ARG_WITH(qtopia-dir, [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], [ ac_qtopia_incdir="$withval"/include] ) qtopia_incdirs="" for dir in $kde_qtopia_dirs; do qtopia_incdirs="$qtopia_incdirs $dir/include" done if test ! "$ac_qtopia_incdir" = "NO"; then qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" fi qtopia_incdir="" AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) ac_qtopia_incdir="$qtopia_incdir" if test -z "$qtopia_incdir"; then AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) fi qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" if test "$qtopia_ver" -lt "$qtopia_minver"; then AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr is required.]) fi AC_LANG_SAVE AC_LANG_CPLUSPLUS ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIB_QTOPIA $LIBQT" cat > conftest.$ac_ext < #include int main( int argc, char **argv ) { QPEApplication app( argc, argv ); return 0; } EOF if AC_TRY_EVAL(ac_link) && test -s conftest; then rm -f conftest* else rm -f conftest* AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at the end of config.log]) fi CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" AC_LANG_RESTORE QTOPIA_INCLUDES="-I$qtopia_incdir" AC_SUBST(QTOPIA_INCLUDES) AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) ]) # serial 46 AC_PROG_LIBTOOL AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ ])])])])])]) AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_SAVE AC_LANG_C AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_LIBTOOL_PICMODE - implement the --with-pic flag # Usage: AC_LIBTOOL_PICMODE[(MODE)] # Where MODE is either `yes' or `no'. If omitted, it defaults to # `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default)]) # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ]) # AC_PATH_MAGIC - find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) else MAGIC_CMD=: fi fi ]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]* | [A-Za-z]:[\\/]*)] re_direlt=['/[^/][^/]*/\.\./'] # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ]) # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" ]) # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognise dependant libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'] else [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'] fi lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; openbsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case "$host_cpu" in i*86 ) changequote(,)dnl lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' changequote([, ])dnl lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; newsos6) [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the # configure arguments. Note that LIBLTDL and INCLTDL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed # with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) # If this macro is not defined by Autoconf, define it here. ifdef([AC_PROVIDE_IFELSE], [], [define([AC_PROVIDE_IFELSE], [ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_LIBTOOL_CXX - enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])]) AC_DEFUN([_AC_LIBTOOL_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([AC_PROG_CXXCPP]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AC_LIBTOOL_GCJ - enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])]) AC_DEFUN([_AC_LIBTOOL_GCJ], [AC_REQUIRE([AC_PROG_LIBTOOL]) AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC dnl is set to the C++ compiler. AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \ || AC_MSG_ERROR([libtool tag configuration failed]) CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) dnl old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN(AM_INIT_AUTOMAKE, [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN(AM_SANITY_CHECK, [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN(AM_MISSING_PROG, [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) dnl AM_PROG_LEX dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT AC_DEFUN(AM_PROG_LEX, [missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1) AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex") AC_PROG_LEX AC_DECL_YYTEXT]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. dnl This file resides in the same directory as the config header dnl that is generated. We must strip everything past the first ":", dnl and everything past the last "/". AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, <>; do case " <<$>>CONFIG_HEADERS " in *" <<$>>am_file "*<<)>> echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=`expr "<<$>>am_indx" + 1` done<<>>dnl>>) changequote([,]))]) kdocumenteditor-1.0/configure.in0100644000076400007640000000433207742332025017027 0ustar tasukuhomeuserdnl This file is part of the KDE libraries/packages dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) dnl This file is free software; you can redistribute it and/or dnl modify it under the terms of the GNU Library General Public dnl License as published by the Free Software Foundation; either dnl version 2 of the License, or (at your option) any later version. dnl This library is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY; without even the implied warranty of dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU dnl Library General Public License for more details. dnl You should have received a copy of the GNU Library General Public License dnl along with this library; see the file COPYING.LIB. If not, write to dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, dnl Boston, MA 02111-1307, USA. # Original Author was Kalle@kde.org # I lifted it in some mater. (Stephan Kulow) # I used much code from Janos Farkas dnl Process this file with autoconf to produce a configure script. AC_INIT(acinclude.m4) dnl a source file from your sub dir dnl This is so we can use kde-common AC_CONFIG_AUX_DIR(admin) dnl This ksh/zsh feature conflicts with `cd blah ; pwd` unset CDPATH dnl Checking host/target/build systems, for make, install etc. AC_CANONICAL_SYSTEM dnl Perform program name transformation AC_ARG_PROGRAM dnl Automake doc recommends to do this only here. (Janos) AM_INIT_AUTOMAKE(kdocumenteditor, "3.0.1") dnl searches for some needed programs KDE_SET_PREFIX dnl generate the config header AM_CONFIG_HEADER(config.h) dnl at the distribution this done dnl Checks for programs. AC_CHECK_COMPILERS AC_ENABLE_SHARED(yes) AC_ENABLE_STATIC(no) KDE_PROG_LIBTOOL dnl for NLS support. Call them in this order! dnl WITH_NLS is for the po files AM_KDE_WITH_NLS dnl KDE_USE_QT AC_PATH_KDE #MIN_CONFIG AC_HEADER_DIRENT AC_HEADER_STDC AC_CHECK_HEADERS(fcntl.h sys/sysctl.h sys/param.h sys/time.h sys/types.h sys/user.h sys/vmmeter.h sys/resource.h vm/vmparam.h unistd.h) KDE_CREATE_SUBDIRSLIST AC_OUTPUT( \ ./Makefile \ doc/Makefile \ doc/ja/Makefile \ kdocumenteditor/Makefile \ pics/Makefile \ pics/hicolor/Makefile \ po/Makefile \ ) kdocumenteditor-1.0/configure0100755000076400007640000101235707742332025016434 0ustar tasukuhomeuser#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_default_prefix=${KDEDIR:-/usr/local/kde} ac_help="$ac_help --disable-fast-perl disable fast Makefile generation (needs perl)" ac_help="$ac_help --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]" ac_help="$ac_help --disable-debug disables debug output and debug symbols [default=no]" ac_help="$ac_help --enable-strict compiles with strict compiler options (may not work!)" ac_help="$ac_help --enable-warnings compiles with -Wall and similiar" ac_help="$ac_help --enable-profile creates profiling infos [default=no]" ac_help="$ac_help --enable-pch enables precompiled header support (currently only KCC) [default=no]" ac_help="$ac_help --enable-final build size optimized apps (experimental - needs lots of memory)" ac_help="$ac_help --disable-closure don't delay template instantiation" ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=no]" ac_help="$ac_help --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" ac_help="$ac_help --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --enable-objprelink prelink apps using objprelink (experimental [only tested on linux/386])" ac_help="$ac_help --enable-embedded link to Qt-embedded, don't use X" ac_help="$ac_help --enable-qtopia link to Qt-embedded, link to the Qtopia Environment" ac_help="$ac_help --with-xinerama enable support for Xinerama " ac_help="$ac_help --disable-mt link to non-threaded Qt (deprecated)" ac_help="$ac_help --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only." ac_help="$ac_help --disable-threading disables threading even if libpthread found " ac_help="$ac_help --with-extra-includes=DIR adds non standard include paths" ac_help="$ac_help --with-extra-libs=DIR adds non standard library paths" ac_help="$ac_help --with-qt-dir=DIR where the root of Qt is installed " ac_help="$ac_help --with-qt-includes=DIR where the Qt includes are. " ac_help="$ac_help --with-qt-libraries=DIR where the Qt library is installed." ac_help="$ac_help --disable-rpath do not use the rpath feature of ld" ac_help="$ac_help --disable-path-check don't try to find out, where to install" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=acinclude.m4 # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in admin $srcdir/admin; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in admin $srcdir/admin" 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. unset CDPATH # Do some error checking and defaulting for the host and target type. # The inputs are: # configure --host=HOST --target=TARGET --build=BUILD NONOPT # # The rules are: # 1. You are not allowed to specify --host, --target, and nonopt at the # same time. # 2. Host defaults to nonopt. # 3. If nonopt is not specified, then host defaults to the current host, # as determined by config.guess. # 4. Target and build default to nonopt. # 5. If nonopt is not specified, then target and build default to host. # The aliases save the names the user supplied, while $host etc. # will get canonicalized. case $host---$target---$nonopt in NONE---*---* | *---NONE---* | *---*---NONE) ;; *) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; esac # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:635: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 echo "configure:656: checking target system type" >&5 target_alias=$target case "$target_alias" in NONE) case $nonopt in NONE) target_alias=$host_alias ;; *) target_alias=$nonopt ;; esac ;; esac target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 echo "configure:674: checking build system type" >&5 build_alias=$build case "$build_alias" in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 test "$host_alias" != "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:733: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' if test -z "$kde_save_INSTALL_given" ; then # OK, user hasn't given any INSTALL, autoconf found one for us # now we test, if it supports the -p flag echo $ac_n "checking for -p flag to install""... $ac_c" 1>&6 echo "configure:790: checking for -p flag to install" >&5 rm -f confinst.$$.* > /dev/null 2>&1 echo "Testtest" > confinst.$$.orig ac_res=no if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then if test -f confinst.$$.new ; then # OK, -p seems to do no harm to install INSTALL="${INSTALL} -p" ac_res=yes fi fi rm -f confinst.$$.* echo "$ac_t""$ac_res" 1>&6 fi if test -z "$kde_save_INSTALL_PROGRAM_given" ; then INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' fi if test -z "$kde_save_INSTALL_SCRIPT_given" ; then INSTALL_SCRIPT='${INSTALL}' fi echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo "configure:813: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "$*" != "X $srcdir/configure conftestfile" \ && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { echo "configure: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" 1>&2; exit 1; } fi test "$2" = conftestfile ) then # Ok. : else { echo "configure: error: newly created file is older than distributed files! Check your system clock" 1>&2; exit 1; } fi rm -f conftest* echo "$ac_t""yes" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:851: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi PACKAGE=kdocumenteditor VERSION="3.0.1" if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } fi cat >> confdefs.h <> confdefs.h <&6 echo "configure:897: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (aclocal --version) < /dev/null > /dev/null 2>&1; then ACLOCAL=aclocal echo "$ac_t""found" 1>&6 else ACLOCAL="$missing_dir/missing aclocal" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo "configure:910: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoconf --version) < /dev/null > /dev/null 2>&1; then AUTOCONF=autoconf echo "$ac_t""found" 1>&6 else AUTOCONF="$missing_dir/missing autoconf" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo "configure:923: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (automake --version) < /dev/null > /dev/null 2>&1; then AUTOMAKE=automake echo "$ac_t""found" 1>&6 else AUTOMAKE="$missing_dir/missing automake" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo "configure:936: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoheader --version) < /dev/null > /dev/null 2>&1; then AUTOHEADER=autoheader echo "$ac_t""found" 1>&6 else AUTOHEADER="$missing_dir/missing autoheader" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo "configure:949: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (makeinfo --version) < /dev/null > /dev/null 2>&1; then MAKEINFO=makeinfo echo "$ac_t""found" 1>&6 else MAKEINFO="$missing_dir/missing makeinfo" echo "$ac_t""missing" 1>&6 fi unset CDPATH if test "x$prefix" = "xNONE"; then prefix=$ac_default_prefix ac_configure_args="$ac_configure_args --prefix=$prefix" fi # Check whether --enable-fast-perl or --disable-fast-perl was given. if test "${enable_fast_perl+set}" = set; then enableval="$enable_fast_perl" with_fast_perl=$enableval else with_fast_perl=yes fi val= if test -f $srcdir/configure.files ; then val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` fi CONF_FILES= if test -n "$val" ; then for i in $val ; do CONF_FILES="$CONF_FILES $i" done fi # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" case $enableval in yes) kde_use_debug_code="yes" kde_use_debug_define=no ;; full) kde_use_debug_code="full" kde_use_debug_define=no ;; *) kde_use_debug_code="no" kde_use_debug_define=yes ;; esac else kde_use_debug_code="no" kde_use_debug_define=no fi # Check whether --enable-dummyoption or --disable-dummyoption was given. if test "${enable_dummyoption+set}" = set; then enableval="$enable_dummyoption" : fi # Check whether --enable-strict or --disable-strict was given. if test "${enable_strict+set}" = set; then enableval="$enable_strict" if test $enableval = "no"; then kde_use_strict_options="no" else kde_use_strict_options="yes" fi else kde_use_strict_options="no" fi # Check whether --enable-warnings or --disable-warnings was given. if test "${enable_warnings+set}" = set; then enableval="$enable_warnings" if test $enableval = "no"; then kde_use_warnings="no" else kde_use_warnings="yes" fi else kde_use_warnings="no" fi if test "$kde_use_debug_code" != "no"; then kde_use_warnings=yes fi # Check whether --enable-profile or --disable-profile was given. if test "${enable_profile+set}" = set; then enableval="$enable_profile" kde_use_profiling=$enableval else kde_use_profiling="no" fi CFLAGS=" $CFLAGS" # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1081: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1111: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1162: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:1194: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 1205 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:1210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1236: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:1241: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:1269: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1302: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 if test "$GCC" = "yes"; then if test "$kde_use_debug_code" != "no"; then if test $kde_use_debug_code = "full"; then CFLAGS="-g3 $CFLAGS" else CFLAGS="-g -O2 $CFLAGS" fi else CFLAGS="-O2 $CFLAGS" fi fi if test "$kde_use_debug_define" = "yes"; then CFLAGS="-DNDEBUG $CFLAGS" fi case "$host" in *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; esac if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then LDFLAGS="" fi CXXFLAGS=" $CXXFLAGS" for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1415: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CXX"; then ac_cv_prog_CXX="$CXX" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CXX="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi CXX="$ac_cv_prog_CXX" if test -n "$CXX"; then echo "$ac_t""$CXX" 1>&6 else echo "$ac_t""no" 1>&6 fi test -n "$CXX" && break done test -n "$CXX" || CXX="gcc" echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:1447: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext << EOF #line 1463 "configure" #include "confdefs.h" int main(){return(0);} EOF if { (eval echo configure:1468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cxx_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cxx_cross=no else ac_cv_prog_cxx_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cxx_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 if test $ac_cv_prog_cxx_works = no; then { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1494: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 cross_compiling=$ac_cv_prog_cxx_cross echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 echo "configure:1499: checking whether we are using GNU C++" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gxx=yes else ac_cv_prog_gxx=no fi fi echo "$ac_t""$ac_cv_prog_gxx" 1>&6 if test $ac_cv_prog_gxx = yes; then GXX=yes else GXX= fi ac_test_CXXFLAGS="${CXXFLAGS+set}" ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS= echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 echo "configure:1527: checking whether ${CXX-g++} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.cc if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then ac_cv_prog_cxx_g=yes else ac_cv_prog_cxx_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 if test "$ac_test_CXXFLAGS" = set; then CXXFLAGS="$ac_save_CXXFLAGS" elif test $ac_cv_prog_cxx_g = yes; then if test "$GXX" = yes; then CXXFLAGS="-g -O2" else CXXFLAGS="-g" fi else if test "$GXX" = yes; then CXXFLAGS="-O2" else CXXFLAGS= fi fi if test "$GXX" = "yes" || test "$CXX" = "KCC"; then if test "$kde_use_debug_code" != "no"; then if test "$CXX" = "KCC"; then CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" else if test "$kde_use_debug_code" = "full"; then CXXFLAGS="-g3 $CXXFLAGS" else CXXFLAGS="-g -O2 $CXXFLAGS" fi fi echo $ac_n "checking whether $CXX supports -fno-builtin""... $ac_c" 1>&6 echo "configure:1572: checking whether $CXX supports -fno-builtin" >&5 kde_cache=`echo fno-builtin | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fno-builtin" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-fno-builtin $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -Woverloaded-virtual""... $ac_c" 1>&6 echo "configure:1631: checking whether $CXX supports -Woverloaded-virtual" >&5 kde_cache=`echo Woverloaded-virtual | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Woverloaded-virtual" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : WOVERLOADED_VIRTUAL="-Woverloaded-virtual" else echo "$ac_t""no" 1>&6 : WOVERLOADED_VRITUAL="" fi else if test "$CXX" = "KCC"; then CXXFLAGS="+K3 $CXXFLAGS" else CXXFLAGS="-O2 $CXXFLAGS" fi fi fi if test "$kde_use_debug_define" = "yes"; then CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" fi if test "$kde_use_profiling" = "yes"; then echo $ac_n "checking whether $CXX supports -pg""... $ac_c" 1>&6 echo "configure:1704: checking whether $CXX supports -pg" >&5 kde_cache=`echo pg | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -pg" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CFLAGS="-pg $CFLAGS" CXXFLAGS="-pg $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi fi if test "$kde_use_warnings" = "yes"; then if test "$GCC" = "yes"; then case $host in *-*-linux-gnu) CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion $CXXFLAGS" ;; esac CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS" echo $ac_n "checking whether $CXX supports -Wundef""... $ac_c" 1>&6 echo "configure:1776: checking whether $CXX supports -Wundef" >&5 kde_cache=`echo Wundef | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Wundef" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wundef $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -Wbad-function-cast""... $ac_c" 1>&6 echo "configure:1834: checking whether $CXX supports -Wbad-function-cast" >&5 kde_cache=`echo Wbad-function-cast | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Wbad-function-cast" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wbad-function-cast $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -Wno-long-long""... $ac_c" 1>&6 echo "configure:1892: checking whether $CXX supports -Wno-long-long" >&5 kde_cache=`echo Wno-long-long | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Wno-long-long" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wno-long-long $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -Wnon-virtual-dtor""... $ac_c" 1>&6 echo "configure:1950: checking whether $CXX supports -Wnon-virtual-dtor" >&5 kde_cache=`echo Wnon-virtual-dtor | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS" else echo "$ac_t""no" 1>&6 : fi fi fi if test "$GCC" = "yes" && test "$kde_use_strict_options" = "yes"; then CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" fi if test "$GXX" = "yes"; then echo $ac_n "checking whether $CXX supports -fno-exceptions""... $ac_c" 1>&6 echo "configure:2016: checking whether $CXX supports -fno-exceptions" >&5 kde_cache=`echo fno-exceptions | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fno-exceptions" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS -fno-exceptions" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -fno-check-new""... $ac_c" 1>&6 echo "configure:2074: checking whether $CXX supports -fno-check-new" >&5 kde_cache=`echo fno-check-new | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fno-check-new" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS -fno-check-new" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports -fexceptions""... $ac_c" 1>&6 echo "configure:2132: checking whether $CXX supports -fexceptions" >&5 kde_cache=`echo fexceptions | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -fexceptions" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : USE_EXCEPTIONS="-fexceptions" else echo "$ac_t""no" 1>&6 : USE_EXCEPTIONS= fi fi if test "$CXX" = "KCC"; then # Check whether --enable-pch or --disable-pch was given. if test "${enable_pch+set}" = set; then enableval="$enable_pch" kde_use_pch=$enableval else kde_use_pch=no fi if test "$kde_use_pch" = "yes"; then echo $ac_n "checking whether $CXX supports --pch""... $ac_c" 1>&6 echo "configure:2205: checking whether $CXX supports --pch" >&5 kde_cache=`echo -pch | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --pch" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --pch" else echo "$ac_t""no" 1>&6 : fi fi echo $ac_n "checking whether $CXX supports --inline_keyword_space_time=6""... $ac_c" 1>&6 echo "configure:2264: checking whether $CXX supports --inline_keyword_space_time=6" >&5 kde_cache=`echo -inline_keyword_space_time=6 | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports --inline_auto_space_time=2""... $ac_c" 1>&6 echo "configure:2322: checking whether $CXX supports --inline_auto_space_time=2" >&5 kde_cache=`echo -inline_auto_space_time=2 | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports --inline_implicit_space_time=2.0""... $ac_c" 1>&6 echo "configure:2380: checking whether $CXX supports --inline_implicit_space_time=2.0" >&5 kde_cache=`echo -inline_implicit_space_time=2.0 | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports --inline_generated_space_time=2.0""... $ac_c" 1>&6 echo "configure:2438: checking whether $CXX supports --inline_generated_space_time=2.0" >&5 kde_cache=`echo -inline_generated_space_time=2.0 | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0" else echo "$ac_t""no" 1>&6 : fi echo $ac_n "checking whether $CXX supports --one_per""... $ac_c" 1>&6 echo "configure:2496: checking whether $CXX supports --one_per" >&5 kde_cache=`echo -one_per | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS --one_per" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : CXXFLAGS="$CXXFLAGS --one_per" else echo "$ac_t""no" 1>&6 : fi fi USE_RTTI= case "$host" in *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; *-*-solaris*) if test "$GXX" = yes; then libstdcpp=`$CXX -print-file-name=libstdc++.so` if test ! -f $libstdcpp; then { echo "configure: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" 1>&2; exit 1; } fi fi ;; esac if test "x$kde_use_qt_emb" != "xyes"; then __val=$CXX __forbid=" -fno-rtti -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXX, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXX=$__new fi __val=$CXXFLAGS __forbid=" -fno-rtti -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXXFLAGS, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXXFLAGS=$__new fi else __val=$CXX __forbid=" -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXX, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXX=$__new fi __val=$CXXFLAGS __forbid=" -rpath " if test -n "$__val"; then __new="" ac_save_IFS=$IFS IFS=" " for i in $__val; do case "$__forbid" in *" $i "*) echo "configure: warning: found forbidden $i in CXXFLAGS, removing it" 1>&2 ;; *) # Careful to not add spaces, where there were none, because otherwise # libtool gets confused, if we change e.g. CXX if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; esac done IFS=$ac_save_IFS CXXFLAGS=$__new fi fi echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 echo "configure:2649: checking how to run the C++ preprocessor" >&5 if test -z "$CXXCPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' CXXCPP="${CXX-g++} -E" cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2670: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CXXCPP=/lib/cpp fi rm -f conftest* ac_cv_prog_CXXCPP="$CXXCPP" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi fi CXXCPP="$ac_cv_prog_CXXCPP" echo "$ac_t""$CXXCPP" 1>&6 # the following is to allow programs, that are known to # have problems when compiled with -O2 if test -n "$CXXFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CXXFLAGS="" for i in $CXXFLAGS; do case $i in -O*) ;; *) NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test -n "$CFLAGS"; then kde_safe_IFS=$IFS IFS=" " NOOPT_CFLAGS="" for i in $CFLAGS; do case $i in -O*) ;; *) NOOPT_CFLAGS="$NOOPT_CFLAGS $i" ;; esac done IFS=$kde_safe_IFS fi if test "x$kde_use_qt_emb" = "xyes"; then NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS -fno-rtti -DQWS" fi # Check whether --enable-final or --disable-final was given. if test "${enable_final+set}" = set; then enableval="$enable_final" kde_use_final=$enableval else kde_use_final=no fi REPO="" NOREPO="" echo $ac_n "checking whether $CXX supports -frepo""... $ac_c" 1>&6 echo "configure:2752: checking whether $CXX supports -frepo" >&5 kde_cache=`echo frepo | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -frepo" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : REPO="-frepo" NOREPO="-fno-repo" else echo "$ac_t""no" 1>&6 : fi if test -z "$REPO"; then echo $ac_n "checking whether $CXX supports -instances=explicit""... $ac_c" 1>&6 echo "configure:2815: checking whether $CXX supports -instances=explicit" >&5 kde_cache=`echo instances=explicit | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -instances=explicit" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : REPO="-instances=explicit" NOREPO="-instances=extern" else echo "$ac_t""no" 1>&6 : fi fi if test -n "$REPO"; then cat >> confdefs.h <&6 echo "configure:3004: checking for ld used by GCC" >&5 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo "configure:3034: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo "configure:3037: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo "configure:3072: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi fi echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 with_gnu_ld=$lt_cv_prog_gnu_ld echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 echo "configure:3089: checking for $LD option to reload object files" >&5 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_ld_reload_flag='-r' fi echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo "configure:3101: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo "configure:3139: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata if ln -s X conftestdata 2>/dev/null then rm -f conftestdata ac_cv_prog_LN_S="ln -s" else ac_cv_prog_LN_S=ln fi fi LN_S="$ac_cv_prog_LN_S" if test "$ac_cv_prog_LN_S" = "ln -s"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 echo "configure:3160: checking how to recognise dependant libraries" >&5 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [regex]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* |pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.012) lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux*) case $host_cpu in alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library' else lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' fi lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; openbsd* ) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case "$host_cpu" in i*86 ) lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; newsos6) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in ncr) lt_cv_deplibs_check_method=pass_all ;; motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; esac ;; esac fi echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method if test $host != $build; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 echo "configure:3348: checking for ${ac_tool_prefix}file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo $ac_n "checking for file""... $ac_c" 1>&6 echo "configure:3410: checking for file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi else MAGIC_CMD=: fi fi fi ;; esac # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_RANLIB"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3513: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi else RANLIB=":" fi fi # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3548: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" break fi done IFS="$ac_save_ifs" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_STRIP"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:3580: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="strip" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi else STRIP=":" fi fi # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" libtool_flags="$libtool_flags --enable-dlopen" # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" : fi test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Check whether --with-pic or --without-pic was given. if test "${with_pic+set}" = set; then withval="$with_pic" pic_mode="$withval" else pic_mode=default fi test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '#line 3647 "configure"' > conftest.$ac_ext if { (eval echo configure:3648: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo "configure:3669: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_cc_needs_belf=no fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; esac echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo "configure:3720: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_cygwin=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo "configure:3753: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_mingw32=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes # Save cache, so that ltconfig can load it cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache # Actually configure libtool. ac_aux_dir is where install-sh is found. AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } # Reload cache, that may have been modified by ltconfig if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" lt_save_CC="$CC" lt_save_CFLAGS="$CFLAGS" AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ deplibs_check_method="$deplibs_check_method" \ file_magic_cmd="$file_magic_cmd" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ --build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ || { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; } CC="$lt_save_CC" CFLAGS="$lt_save_CFLAGS" # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking for object suffix""... $ac_c" 1>&6 echo "configure:3900: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext if { (eval echo configure:3906: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; esac done else { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } fi rm -f conftest* fi echo "$ac_t""$ac_cv_objext" 1>&6 OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo "configure:3926: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= if { (eval echo configure:3936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done else { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi rm -f conftest* test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi fi EXEEXT="" test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross LIBTOOL_SHELL="/bin/sh ./libtool" # LIBTOOL="$LIBTOOL --silent" KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" # Check whether --enable-objprelink or --disable-objprelink was given. if test "${enable_objprelink+set}" = set; then enableval="$enable_objprelink" kde_use_objprelink=$enableval else kde_use_objprelink=no fi if test "x$kde_use_objprelink" = "xyes"; then echo $ac_n "checking for objprelink""... $ac_c" 1>&6 echo "configure:3988: checking for objprelink" >&5 if test -n "$OBJPRELINK"; then kde_cv_path="$OBJPRELINK"; else kde_cache=`echo objprelink | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/objprelink"; then if test -n "" then evalstr="$dir/objprelink 2>&1 " if eval $evalstr; then kde_cv_path="$dir/objprelink" break fi else kde_cv_path="$dir/objprelink" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 kde_use_objprelink=no else echo "$ac_t""$kde_cv_path" 1>&6 OBJPRELINK=$kde_cv_path fi if test "x$kde_use_objprelink" = "xyes"; then echo $ac_n "checking Patching libtool to run objprelink.""... $ac_c" 1>&6 echo "configure:4045: checking Patching libtool to run objprelink." >&5 mv libtool libtool.orig cat > libtool <<\EOF #! /bin/sh for n ; do case $n in *.o) test -r $n && echo objprelink $n && objprelink $n ;; *.lo) m=`basename $n .lo`".o" && test -r $m && echo objprelink $m && objprelink $m m=".libs/$m" && test -r $m && echo objprelink $m && objprelink $m ;; esac; done EOF cat >> libtool libtool.orig rm libtool.orig chmod a+x libtool echo "$ac_t""done" 1>&6 fi fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:4068: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$MSGFMT" in /*) ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then ac_cv_path_MSGFMT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" ;; esac fi MSGFMT="$ac_cv_path_MSGFMT" if test -n "$MSGFMT"; then echo "$ac_t""$MSGFMT" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:4102: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GMSGFMT" in /*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi GMSGFMT="$ac_cv_path_GMSGFMT" if test -n "$GMSGFMT"; then echo "$ac_t""$GMSGFMT" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then echo "$ac_t""found msgfmt program is not GNU msgfmt; ignore it" 1>&6 GMSGFMT=":" fi MSGFMT=$GMSGFMT # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:4147: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$XGETTEXT" in /*) ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ac_cv_path_XGETTEXT="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ;; esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test -n "$XGETTEXT"; then echo "$ac_t""$XGETTEXT" 1>&6 else echo "$ac_t""no" 1>&6 fi if test "$XGETTEXT" != ":"; then if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 XGETTEXT=":" fi fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking for main in -lutil""... $ac_c" 1>&6 echo "configure:4200: checking for main in -lutil" >&5 ac_lib_var=`echo util'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lutil $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBUTIL="-lutil" else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6 echo "configure:4236: checking for main in -lcompat" >&5 ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcompat $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBCOMPAT="-lcompat" else echo "$ac_t""no" 1>&6 fi kde_have_crypt= echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6 echo "configure:4273: checking for crypt in -lcrypt" >&5 ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lcrypt $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBCRYPT="-lcrypt"; kde_have_crypt=yes else echo "$ac_t""no" 1>&6 echo $ac_n "checking for crypt in -lc""... $ac_c" 1>&6 echo "configure:4311: checking for crypt in -lc" >&5 ac_lib_var=`echo c'_'crypt | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 kde_have_crypt=yes else echo "$ac_t""no" 1>&6 echo "configure: warning: you have no crypt in either libcrypt or libc. You should install libcrypt from another source or configure with PAM support" 1>&2 kde_have_crypt=no fi fi if test $kde_have_crypt = yes; then cat >> confdefs.h <&6 echo "configure:4367: checking for socklen_t" >&5 if eval "test \"`echo '$''{'ac_cv_socklen_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #include int main() { socklen_t a=0; getsockname(0,(struct sockaddr*)0, &a); ; return 0; } EOF if { (eval echo configure:4397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_socklen_t=socklen_t else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < #include int main() { int a=0; getsockname(0,(struct sockaddr*)0, &a); ; return 0; } EOF if { (eval echo configure:4418: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_socklen_t=int else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_socklen_t=size_t fi rm -f conftest* fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$ac_cv_socklen_t" 1>&6 if test "$ac_cv_socklen_t" != "socklen_t"; then cat >> confdefs.h <> confdefs.h <&6 echo "configure:4464: checking for dnet_ntoa in -ldnet" >&5 ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" else echo "$ac_t""no" 1>&6 fi if test $ac_cv_lib_dnet_dnet_ntoa = no; then echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 echo "configure:4505: checking for dnet_ntoa in -ldnet_stub" >&5 ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldnet_stub $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for inet_ntoa""... $ac_c" 1>&6 echo "configure:4546: checking for inet_ntoa" >&5 if eval "test \"`echo '$''{'ac_cv_func_inet_ntoa'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char inet_ntoa(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa) choke me #else inet_ntoa(); #endif ; return 0; } EOF if { (eval echo configure:4574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_inet_ntoa=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_inet_ntoa=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'inet_ntoa`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_inet_ntoa = no; then echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6 echo "configure:4595: checking for inet_ntoa in -lnsl" >&5 ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for connect""... $ac_c" 1>&6 echo "configure:4636: checking for connect" >&5 if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char connect(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_connect) || defined (__stub___connect) choke me #else connect(); #endif ; return 0; } EOF if { (eval echo configure:4664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_connect=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_connect=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_connect = no; then echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 echo "configure:4685: checking for connect in -lsocket" >&5 ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsocket $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for remove""... $ac_c" 1>&6 echo "configure:4727: checking for remove" >&5 if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char remove(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_remove) || defined (__stub___remove) choke me #else remove(); #endif ; return 0; } EOF if { (eval echo configure:4755: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_remove=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_remove=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi if test $ac_cv_func_remove = no; then echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 echo "configure:4776: checking for remove in -lposix" >&5 ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lposix $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" else echo "$ac_t""no" 1>&6 fi fi # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. echo $ac_n "checking for shmat""... $ac_c" 1>&6 echo "configure:4819: checking for shmat" >&5 if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shmat(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shmat) || defined (__stub___shmat) choke me #else shmat(); #endif ; return 0; } EOF if { (eval echo configure:4847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shmat=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_shmat=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 echo "configure:4865: checking for shmat in -lipc" >&5 ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lipc $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" else echo "$ac_t""no" 1>&6 fi fi # Solaris 2.6 and others need -lresolv for res_init for ac_func in res_init do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:4911: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:4939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 kde_libs_safe="$LIBS" LIBS="$LIBS $X_EXTRA_LIBS -lresolv" cat > conftest.$ac_ext < int main() { res_init(); ; return 0; } EOF if { (eval echo configure:4974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBRESOLV="-lresolv" X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV" cat >> confdefs.h <<\EOF #define HAVE_RES_INIT 1 EOF else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LIBS=$kde_libs_safe fi done LIBSOCKET="$X_EXTRA_LIBS" echo $ac_n "checking for killpg in -lucb""... $ac_c" 1>&6 echo "configure:4999: checking for killpg in -lucb" >&5 ac_lib_var=`echo ucb'_'killpg | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lucb $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBUCB="-lucb" else echo "$ac_t""no" 1>&6 fi case $host in *-*-lynxos* ) echo $ac_n "checking LynxOS header file wrappers""... $ac_c" 1>&6 echo "configure:5041: checking LynxOS header file wrappers" >&5 CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__" echo "$ac_t""disabled" 1>&6 echo $ac_n "checking for gethostbyname in -lbsd""... $ac_c" 1>&6 echo "configure:5045: checking for gethostbyname in -lbsd" >&5 ac_lib_var=`echo bsd'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lbsd $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBSOCKET="-lbsd" else echo "$ac_t""no" 1>&6 fi ;; esac echo $ac_n "checking size of int""... $ac_c" 1>&6 echo "configure:5087: checking size of int" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_int=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(int)); exit(0); } EOF if { (eval echo configure:5106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_int=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_int=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_int" 1>&6 cat >> confdefs.h <&6 echo "configure:5125: checking size of long" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_long=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(long)); exit(0); } EOF if { (eval echo configure:5144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_long=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_long=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_long" 1>&6 cat >> confdefs.h <&6 echo "configure:5163: checking size of char *" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_char_p'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_char_p=4 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(char *)); exit(0); } EOF if { (eval echo configure:5182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_char_p=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_char_p=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_char_p" 1>&6 cat >> confdefs.h <&6 echo "configure:5201: checking size of char" >&5 if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_sizeof_char=1 else cat > conftest.$ac_ext < main() { FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof(char)); exit(0); } EOF if { (eval echo configure:5220: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_sizeof_char=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_sizeof_char=0 fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_sizeof_char" 1>&6 cat >> confdefs.h <&6 echo "configure:5241: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBDL="-ldl" ac_cv_have_dlfcn=yes else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for shl_unload in -ldld""... $ac_c" 1>&6 echo "configure:5285: checking for shl_unload in -ldld" >&5 ac_lib_var=`echo dld'_'shl_unload | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBDL="-ldld" ac_cv_have_shload=yes else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for extra includes""... $ac_c" 1>&6 echo "configure:5333: checking for extra includes" >&5 # Check whether --with-extra-includes or --without-extra-includes was given. if test "${with_extra_includes+set}" = set; then withval="$with_extra_includes" kde_use_extra_includes="$withval" else kde_use_extra_includes=NONE fi kde_extra_includes= if test -n "$kde_use_extra_includes" && \ test "$kde_use_extra_includes" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_includes; do kde_extra_includes="$kde_extra_includes $dir" USER_INCLUDES="$USER_INCLUDES -I$dir" done IFS=$ac_save_ifs kde_use_extra_includes="added" else kde_use_extra_includes="no" fi echo "$ac_t""$kde_use_extra_includes" 1>&6 kde_extra_libs= echo $ac_n "checking for extra libs""... $ac_c" 1>&6 echo "configure:5364: checking for extra libs" >&5 # Check whether --with-extra-libs or --without-extra-libs was given. if test "${with_extra_libs+set}" = set; then withval="$with_extra_libs" kde_use_extra_libs=$withval else kde_use_extra_libs=NONE fi if test -n "$kde_use_extra_libs" && \ test "$kde_use_extra_libs" != "NONE"; then ac_save_ifs=$IFS IFS=':' for dir in $kde_use_extra_libs; do kde_extra_libs="$kde_extra_libs $dir" KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" USER_LDFLAGS="$USER_LDFLAGS -L$dir" done IFS=$ac_save_ifs kde_use_extra_libs="added" else kde_use_extra_libs="no" fi echo "$ac_t""$kde_use_extra_libs" 1>&6 echo $ac_n "checking for libz""... $ac_c" 1>&6 echo "configure:5398: checking for libz" >&5 if eval "test \"`echo '$''{'ac_cv_lib_z'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross kde_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext < int main() { return (zlibVersion() == ZLIB_VERSION); ; return 0; } EOF if { (eval echo configure:5424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_z='-lz'" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_z=no" fi rm -f conftest* LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" fi if test ! "$ac_cv_lib_z" = no; then cat >> confdefs.h <&6 else { echo "configure: error: not found. Check your installation and look into config.log" 1>&2; exit 1; } LIBZ="" fi # Check whether --enable-embedded or --disable-embedded was given. if test "${enable_embedded+set}" = set; then enableval="$enable_embedded" kde_use_qt_emb=$enableval else kde_use_qt_emb=no fi # Check whether --enable-qtopia or --disable-qtopia was given. if test "${enable_qtopia+set}" = set; then enableval="$enable_qtopia" kde_use_qt_emb_palm=$enableval else kde_use_qt_emb_palm=no fi if test "$kde_use_qt_emb" = "no"; then echo $ac_n "checking for X""... $ac_c" 1>&6 echo "configure:5477: checking for X" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if eval "test \"`echo '$''{'kde_cv_have_x'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then kde_x_includes=NO else kde_x_includes=$x_includes fi if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then kde_x_libraries=NO else kde_x_libraries=$x_libraries fi # below we use the standard autoconf calls ac_x_libraries=$kde_x_libraries ac_x_includes=$kde_x_includes if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:5516: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* # Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest* fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f conftest* fi # $ac_x_libraries = NO case "$host" in mips-sgi-irix6*) ;; *-*-solaris*) ;; *) rm -fr conftestdir if mkdir conftestdir; then cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case "$ac_im_incroot" in /usr/include) ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. rm -fr conftestdir fi if test -z "$ac_x_includes"; then ac_x_includes="." fi if test -z "$ac_x_libraries"; then ac_x_libraries="/usr/lib" fi esac #from now on we use our own again # when the user already gave --x-includes, we ignore # what the standard autoconf macros told us. if test "$kde_x_includes" = NO; then kde_x_includes=$ac_x_includes fi # for --x-libraries too if test "$kde_x_libraries" = NO; then kde_x_libraries=$ac_x_libraries fi if test "$kde_x_includes" = NO; then { echo "configure: error: Can't find X includes. Please check your installation and add the correct paths!" 1>&2; exit 1; } fi if test "$kde_x_libraries" = NO; then { echo "configure: error: Can't find X libraries. Please check your installation and add the correct paths!" 1>&2; exit 1; } fi # Record where we found X for the cache. kde_cv_have_x="have_x=yes \ kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" fi eval "$kde_cv_have_x" if test "$have_x" != yes; then echo "$ac_t""$have_x" 1>&6 no_x=yes else echo "$ac_t""libraries $kde_x_libraries, headers $kde_x_includes" 1>&6 fi if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then X_INCLUDES="" x_includes="."; else x_includes=$kde_x_includes X_INCLUDES="-I$x_includes" fi if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then X_LDFLAGS="" x_libraries="/usr/lib"; else x_libraries=$kde_x_libraries X_LDFLAGS="-L$x_libraries" fi all_includes="$X_INCLUDES" all_libraries="$X_LDFLAGS" # Check for libraries that X11R6 Xt/Xaw programs need. ac_save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $X_LDFLAGS" # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to # check for ICE first), but we must link in the order -lSM -lICE or # we get undefined symbols. So assume we have SM if we have ICE. # These have to be linked with before -lX11, unlike the other # libraries we check for below, so use a different variable. # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 echo "configure:5766: checking for IceConnectionNumber in -lICE" >&5 ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lICE $X_EXTRA_LIBS $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBSM="-lSM -lICE" else echo "$ac_t""no" 1>&6 fi LDFLAGS="$ac_save_LDFLAGS" LIB_X11='-lX11 $(LIBSOCKET)' echo $ac_n "checking for libXext""... $ac_c" 1>&6 echo "configure:5814: checking for libXext" >&5 if eval "test \"`echo '$''{'kde_cv_have_libXext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_ldflags_safe="$LDFLAGS" kde_libs_safe="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" LIBS="-lXext -lX11 $LIBSOCKET" cat > conftest.$ac_ext < #ifdef STDC_HEADERS # include #endif int main() { printf("hello Xext\n"); ; return 0; } EOF if { (eval echo configure:5840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* kde_cv_have_libXext=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* kde_cv_have_libXext=no fi rm -f conftest* LDFLAGS=$kde_ldflags_safe LIBS=$kde_libs_safe fi echo "$ac_t""$kde_cv_have_libXext" 1>&6 if test "$kde_cv_have_libXext" = "no"; then { echo "configure: error: We need a working libXext to proceed. Since configure can't find it itself, we stop here assuming that make wouldn't find them either." 1>&2; exit 1; } fi echo $ac_n "checking for Xinerama""... $ac_c" 1>&6 echo "configure:5867: checking for Xinerama" >&5 # Check whether --with-xinerama or --without-xinerama was given. if test "${with_xinerama+set}" = set; then withval="$with_xinerama" no_xinerama=no else no_xinerama=yes fi kde_save_LDFLAGS="$LDFLAGS" kde_save_CFLAGS="$CFLAGS" kde_save_LIBS="$LIBS" LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" CFLAGS="$CFLAGS -I$x_includes" LIBS="-lXinerama -lXext" if test "x$no_xinerama" = "xno"; then if eval "test \"`echo '$''{'ac_cv_have_xinerama'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { XineramaIsActive(NULL); ; return 0; } EOF if { (eval echo configure:5905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_have_xinerama="yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_have_xinerama="no" fi rm -f conftest* fi else ac_cv_have_xinerama=no; fi echo "$ac_t""$ac_cv_have_xinerama" 1>&6 LIBXINERAMA="" if test "$ac_cv_have_xinerama" = "yes"; then cat >> confdefs.h <<\EOF #define HAVE_XINERAMA 1 EOF LIBXINERAMA="-lXinerama" fi LDFLAGS="$kde_save_LDFLAGS" CFLAGS="$kde_save_CFLAGS" LIBS="$kde_save_LIBS" LIB_XEXT="-lXext" QTE_NORTTI="" else CXXFLAGS="$CXXFLAGS -fno-rtti -DQWS" CFLAGS="$CFLAGS -DQWS" LDFLAGS="$LDFLAGS -DQWS" QTE_NORTTI="-fno-rtti -DQWS" X_PRE_LIBS="" LIB_X11="" LIB_XEXT="" LIBSM="" X_INCLUDES="" X_LDFLAGS="" x_includes="" x_libraries="" fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if test -z ""; then kde_qtver=3 kde_qtsubver=1 else kde_qtsubver=`echo "" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'` # following is the check if subversion isn´t found in passed argument if test "$kde_qtsubver" = ""; then kde_qtsubver=1 fi kde_qtver=`echo "" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'` if test "$kde_qtver" = "1"; then kde_qtsubver=42 fi fi if test -z ""; then if test "$kde_qtver" = "2"; then if test $kde_qtsubver -gt 0; then kde_qt_minversion=">= Qt 2.2.2" else kde_qt_minversion=">= Qt 2.0.2" fi fi if test "$kde_qtver" = "3"; then kde_qt_minversion=">= Qt 3.0.3" fi if test "$kde_qtver" = "1"; then kde_qt_minversion=">= 1.42 and < 2.0" fi else kde_qt_minversion= fi if test -z ""; then if test $kde_qtver = 3; then kde_qt_verstring="QT_VERSION >= 303" fi if test $kde_qtver = 2; then if test $kde_qtsubver -gt 0; then kde_qt_verstring="QT_VERSION >= 222" else kde_qt_verstring="QT_VERSION >= 200" fi fi if test $kde_qtver = 1; then kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200" fi else kde_qt_verstring= fi if test $kde_qtver = 3; then kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt" fi if test $kde_qtver = 2; then kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt" fi if test $kde_qtver = 1; then kde_qt_dirs="$QTDIR /usr/lib/qt" fi echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6 echo "configure:6041: checking for pthread_create in -lpthread" >&5 ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lpthread $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBPTHREAD="-lpthread" else echo "$ac_t""no" 1>&6 fi # Check whether --enable-kernel-threads or --disable-kernel-threads was given. if test "${enable_kernel_threads+set}" = set; then enableval="$enable_kernel_threads" kde_use_kernthreads=$enableval else kde_use_kernthreads=no fi if test "$kde_use_kernthreads" = "yes"; then ac_save_CXXFLAGS="$CXXFLAGS" ac_save_CFLAGS="$CFLAGS" CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" for ac_hdr in pthread/linuxthreads/pthread.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:6101: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:6111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done CXXFLAGS="$ac_save_CXXFLAGS" CFLAGS="$ac_save_CFLAGS" if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then kde_use_kernthreads=no else echo $ac_n "checking for pthread_join in -llthread""... $ac_c" 1>&6 echo "configure:6143: checking for pthread_join in -llthread" >&5 ac_lib_var=`echo lthread'_'pthread_join | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-llthread $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBPTHREAD="-llthread -llgcc_r" else echo "$ac_t""no" 1>&6 fi if test "x$LIBPTHREAD" = "x"; then kde_use_kernthreads=no else USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" fi fi else USE_THREADS="" if test -z "$LIBPTHREAD"; then echo $ac_n "checking whether $CXX supports -pthread""... $ac_c" 1>&6 echo "configure:6192: checking whether $CXX supports -pthread" >&5 kde_cache=`echo pthread | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -pthread" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : USE_THREADS="-pthread" else echo "$ac_t""no" 1>&6 : fi fi fi case $host_os in solaris*) echo $ac_n "checking whether $CXX supports -mt""... $ac_c" 1>&6 echo "configure:6255: checking whether $CXX supports -mt" >&5 kde_cache=`echo mt | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS -mt" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_prog_cxx_$kde_cache=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : USE_THREADS="-mt" else echo "$ac_t""no" 1>&6 : fi CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" ;; freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;; aix*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" LIBPTHREAD="$LIBPTHREAD -lc_r" ;; linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" if test "$CXX" = "KCC"; then CXXFLAGS="$CXXFLAGS --thread_safe" NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" fi ;; *) ;; esac echo $ac_n "checking for libpng""... $ac_c" 1>&6 echo "configure:6336: checking for libpng" >&5 if eval "test \"`echo '$''{'ac_cv_lib_png'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_save_LIBS="$LIBS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" else LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" fi kde_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext < int main() { png_structp png_ptr = png_create_read_struct( /* image ptr */ PNG_LIBPNG_VER_STRING, 0, 0, 0 ); return( png_ptr != 0 ); ; return 0; } EOF if { (eval echo configure:6370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_png='-lpng $LIBZ -lm'" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_png=no" fi rm -f conftest* LIBS="$kde_save_LIBS" CFLAGS="$kde_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then cat >> confdefs.h <&6 else echo "$ac_t""no" 1>&6 LIBPNG="" fi echo $ac_n "checking for libjpeg6b""... $ac_c" 1>&6 echo "configure:6402: checking for libjpeg6b" >&5 if eval "test \"`echo '$''{'ac_cv_lib_jpeg_6b'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_jpeg_6b=-ljpeg6b" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_jpeg_6b=no" fi rm -f conftest* LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_6b" echo "$ac_t""$ac_cv_lib_jpeg_6b" 1>&6 else echo "$ac_t""no" 1>&6 echo $ac_n "checking for libjpeg""... $ac_c" 1>&6 echo "configure:6463: checking for libjpeg" >&5 if eval "test \"`echo '$''{'ac_cv_lib_jpeg_normal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm" ac_save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_jpeg_normal=-ljpeg" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_jpeg_normal=no" fi rm -f conftest* LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" fi if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then LIBJPEG="$ac_cv_lib_jpeg_normal" echo "$ac_t""$ac_cv_lib_jpeg_normal" 1>&6 else echo "$ac_t""no" 1>&6 LIBJPEG= fi fi jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes" jpeg_incdir=NO for i in $jpeg_incdirs; do for j in jpeglib.h; do echo "configure: 6541: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 jpeg_incdir=$i break 2 fi done done test "x$jpeg_incdir" = xNO && jpeg_incdir= if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then cat >> confdefs.h <&2 else echo "configure: warning: libjpeg not found. disable JPEG support." 1>&2 fi jpeg_incdir= LIBJPEG= fi # Check whether --enable-mt or --disable-mt was given. if test "${enable_mt+set}" = set; then enableval="$enable_mt" kde_use_qt_mt=$enableval else if test $kde_qtver = 3; then kde_use_qt_mt=yes else kde_use_qt_mt=no fi fi USING_QT_MT="" KDE_MT_LDFLAGS= KDE_MT_LIBS= if test "x$kde_use_qt_mt" = "xyes"; then if test -z "$LIBPTHREAD"; then if test -z "$USE_THREADS"; then kde_check_threading_default=no else kde_check_threading_default=yes fi else kde_check_threading_default=yes fi # Check whether --enable-threading or --disable-threading was given. if test "${enable_threading+set}" = set; then enableval="$enable_threading" kde_use_threading=$enableval else kde_use_threading=$kde_check_threading_default fi if test "x$kde_use_threading" = "xyes"; then cat >> confdefs.h <<\EOF #define HAVE_LIBPTHREAD 1 EOF fi if test "x$kde_use_threading" = "xyes"; then CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" KDE_MT_LDFLAGS="$USE_THREADS" KDE_MT_LIBS="$LIBPTHREAD" else kde_use_qt_mt=no fi fi kde_qt_was_given=yes if test -z "$LIBQT_GLOB"; then if test "x$kde_use_qt_emb" = "xyes"; then LIBQT_GLOB="libqte.*" else LIBQT_GLOB="libqt.*" fi fi if test -z "$LIBQT"; then if test "x$kde_use_qt_emb" = "xyes"; then qtlib="qte" else qtlib="qt" fi kde_int_qt="-l$qtlib" else kde_int_qt="$LIBQT" kde_lib_qt_set=yes fi if test -z "$LIBQPE"; then if test "x$kde_use_qt_emb" = "xyes"; then if test "x$kde_use_qt_emb_palm" = "xyes"; then LIB_QPE="-lqpe" else LIB_QPE="" fi else LIB_QPE="" fi fi if test "x$kde_use_qt_mt" = "xyes"; then if test -z "$LIBQT"; then LIBQT="-l$qtlib-mt" kde_int_qt="-l$qtlib-mt" else LIBQT="$qtlib-mt" kde_int_qt="$qtlib-mt" fi LIBQT_GLOB="lib$qtlib-mt.*" USING_QT_MT="using -mt" else LIBQT="-l$qtlib" fi if test $kde_qtver != 1; then LIBQT="$LIBQT $LIBPNG $LIBJPEG" fi if test $kde_qtver = 3; then LIBQT="$LIBQT $LIBDL" fi echo $ac_n "checking for Qt""... $ac_c" 1>&6 echo "configure:6704: checking for Qt" >&5 if test "x$kde_use_qt_emb" != "xyes"; then LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" fi ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO qt_libraries="" qt_includes="" # Check whether --with-qt-dir or --without-qt-dir was given. if test "${with_qt_dir+set}" = set; then withval="$with_qt_dir" ac_qt_includes="$withval"/include ac_qt_libraries="$withval"/lib ac_qt_bindir="$withval"/bin fi # Check whether --with-qt-includes or --without-qt-includes was given. if test "${with_qt_includes+set}" = set; then withval="$with_qt_includes" ac_qt_includes="$withval" fi kde_qt_libs_given=no # Check whether --with-qt-libraries or --without-qt-libraries was given. if test "${with_qt_libraries+set}" = set; then withval="$with_qt_libraries" ac_qt_libraries="$withval" kde_qt_libs_given=yes fi if eval "test \"`echo '$''{'ac_cv_have_qt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else #try to guess Qt locations qt_incdirs="" for dir in $kde_qt_dirs; do qt_incdirs="$qt_incdirs $dir/include $dir" done qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes" if test ! "$ac_qt_includes" = "NO"; then qt_incdirs="$ac_qt_includes $qt_incdirs" fi if test "$kde_qtver" != "1"; then kde_qt_header=qstyle.h else kde_qt_header=qglobal.h fi qt_incdir=NO for i in $qt_incdirs; do for j in $kde_qt_header; do echo "configure: 6768: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 qt_incdir=$i break 2 fi done done ac_qt_includes="$qt_incdir" qt_libdirs="" for dir in $kde_qt_dirs; do qt_libdirs="$qt_libdirs $dir/lib $dir" done qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" if test ! "$ac_qt_libraries" = "NO"; then qt_libdir=$ac_qt_libraries else qt_libdirs="$ac_qt_libraries $qt_libdirs" # if the Qt was given, the chance is too big that libqt.* doesn't exist qt_libdir=NONE for dir in $qt_libdirs; do try="ls -1 $dir/${LIBQT_GLOB}" if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi done fi ac_qt_libraries="$qt_libdir" ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" LIBS="$LIBS $LIBQT $KDE_MT_LIBS" cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi if test "$kde_qtver" = "3"; then cat >> conftest.$ac_ext < #include #include EOF fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_qt_libraries="NO" fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then ac_cv_have_qt="have_qt=no" ac_qt_notfound="" missing_qt_mt="" if test "$ac_qt_includes" = NO; then if test "$ac_qt_libraries" = NO; then ac_qt_notfound="(headers and libraries)"; else ac_qt_notfound="(headers)"; fi else if test "x$kde_use_qt_mt" = "xyes"; then missing_qt_mt=" Make sure that you have compiled Qt with thread support!" ac_qt_notfound="(library $qtlib-mt)"; else ac_qt_notfound="(library $qtlib)"; fi fi { echo "configure: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! For more details about this problem, look at the end of config.log.$missing_qt_mt" 1>&2; exit 1; } else have_qt="yes" fi fi eval "$ac_cv_have_qt" if test "$have_qt" != yes; then echo "$ac_t""$have_qt" 1>&6; else ac_cv_have_qt="have_qt=yes \ ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" echo "$ac_t""libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" 1>&6 qt_libraries="$ac_qt_libraries" qt_includes="$ac_qt_includes" fi if test ! "$kde_qt_libs_given" = "yes"; then echo $ac_n "checking if Qt compiles without flags""... $ac_c" 1>&6 echo "configure:6945: checking if Qt compiles without flags" >&5 if eval "test \"`echo '$''{'kde_cv_qt_direct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH ac_LIBRARY_PATH="$LIBRARY_PATH" ac_cxxflags_safe="$CXXFLAGS" ac_ldflags_safe="$LDFLAGS" ac_libs_safe="$LIBS" CXXFLAGS="$CXXFLAGS -I$qt_includes" LDFLAGS="$LDFLAGS $X_LDFLAGS" if test "x$kde_use_qt_emb" != "xyes"; then LIBS="$LIBQT -lXext -lX11 $LIBSOCKET" else LIBS="$LIBQT $LIBSOCKET" fi LD_LIBRARY_PATH= export LD_LIBRARY_PATH LIBRARY_PATH= export LIBRARY_PATH cat > conftest.$ac_ext < #include EOF if test "$kde_qtver" = "2"; then cat >> conftest.$ac_ext < #include #include EOF if test $kde_qtsubver -gt 0; then cat >> conftest.$ac_ext < EOF fi fi if test "$kde_qtver" = "3"; then cat >> conftest.$ac_ext < #include #include EOF fi echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then kde_cv_qt_direct="yes" else kde_cv_qt_direct="no" echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CXXFLAGS="$ac_cxxflags_safe" LDFLAGS="$ac_ldflags_safe" LIBS="$ac_libs_safe" LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" export LD_LIBRARY_PATH LIBRARY_PATH="$ac_LIBRARY_PATH" export LIBRARY_PATH ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if test "$kde_cv_qt_direct" = "yes"; then echo "$ac_t""yes" 1>&6 qt_libraries= else echo "$ac_t""no" 1>&6 fi fi if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then QT_INCLUDES="" else QT_INCLUDES="-I$qt_includes" all_includes="$QT_INCLUDES $all_includes" fi if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then QT_LDFLAGS="" else QT_LDFLAGS="-L$qt_libraries" all_libraries="$all_libraries $QT_LDFLAGS" fi test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" qt_bindirs="" for dir in $kde_qt_dirs; do qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" done qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" if test ! "$ac_qt_bindir" = "NO"; then qt_bindirs="$ac_qt_bindir $qt_bindirs" fi echo $ac_n "checking for moc""... $ac_c" 1>&6 echo "configure:7111: checking for moc" >&5 if test -n "$MOC"; then kde_cv_path="$MOC"; else kde_cache=`echo moc | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$qt_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/moc"; then if test -n "" then evalstr="$dir/moc 2>&1 " if eval $evalstr; then kde_cv_path="$dir/moc" break fi else kde_cv_path="$dir/moc" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: No Qt meta object compiler (moc) found! Please check whether you installed Qt correctly. You need to have a running moc binary. configure tried to run $ac_cv_path_moc and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable MOC to the right one before running configure. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 MOC=$kde_cv_path fi if test -z "$UIC_NOT_NEEDED"; then echo $ac_n "checking for uic""... $ac_c" 1>&6 echo "configure:7177: checking for uic" >&5 if test -n "$UIC"; then kde_cv_path="$UIC"; else kde_cache=`echo uic | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$qt_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/uic"; then if test -n "" then evalstr="$dir/uic 2>&1 " if eval $evalstr; then kde_cv_path="$dir/uic" break fi else kde_cv_path="$dir/uic" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 UIC="" else echo "$ac_t""$kde_cv_path" 1>&6 UIC=$kde_cv_path fi if test -z "$UIC" ; then echo "configure: warning: No Qt ui compiler (uic) found! Please check whether you installed Qt correctly. You need to have a running uic binary. configure tried to run $ac_cv_path_uic and the test didn't succeed. If configure shouldn't have tried this one, set the environment variable UIC to the right one before running configure. " 1>&2 exit 1 elif test $kde_qtver = 3; then echo $ac_n "checking whether uic supports -L ""... $ac_c" 1>&6 echo "configure:7246: checking whether uic supports -L " >&5 kde_cache=`echo L | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_uic_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat >conftest.ui < EOT ac_uic_testrun="$UIC -L /nonexistant conftest.ui >/dev/null" if { (eval echo configure:7256: \"$ac_uic_testrun\") 1>&5; (eval $ac_uic_testrun) 2>&5; }; then eval "kde_cv_prog_uic_$kde_cache=yes" else eval "kde_cv_prog_uic_$kde_cache=no" fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : ac_uic_supports_libpath=yes else echo "$ac_t""no" 1>&6 : ac_uic_supports_libpath=no fi echo $ac_n "checking whether uic supports -nounload ""... $ac_c" 1>&6 echo "configure:7278: checking whether uic supports -nounload " >&5 kde_cache=`echo nounload | sed 'y% .=/+-%____p_%'` if eval "test \"`echo '$''{'kde_cv_prog_uic_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat >conftest.ui < EOT ac_uic_testrun="$UIC -nounload conftest.ui >/dev/null" if { (eval echo configure:7288: \"$ac_uic_testrun\") 1>&5; (eval $ac_uic_testrun) 2>&5; }; then eval "kde_cv_prog_uic_$kde_cache=yes" else eval "kde_cv_prog_uic_$kde_cache=no" fi rm -f conftest* fi if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then echo "$ac_t""yes" 1>&6 : ac_uic_supports_nounload=yes else echo "$ac_t""no" 1>&6 : ac_uic_supports_nounload=no fi if test x$ac_uic_supports_libpath = xyes; then UIC="$UIC -L \$(kde_widgetdir)" fi if test x$ac_uic_supports_nounload = xyes; then UIC="$UIC -nounload" fi fi else UIC="echo uic not available: " fi UIC_TR="i18n" if test $kde_qtver = 3; then UIC_TR="tr2i18n" fi echo $ac_n "checking if Qt needs $LIBJPEG""... $ac_c" 1>&6 echo "configure:7333: checking if Qt needs $LIBJPEG" >&5 if eval "test \"`echo '$''{'kde_cv_qt_jpeg'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' ac_save_LIBS="$LIBS" LIBS="$all_libraries $USER_LDFLAGS $LIBQT" LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` ac_save_CXXFLAGS="$CXXFLAGS" CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" cat > conftest.$ac_ext < int main() { int argc; char** argv; QApplication app(argc, argv); ; return 0; } EOF if { (eval echo configure:7365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "kde_cv_qt_jpeg=no" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "kde_cv_qt_jpeg=yes" fi rm -f conftest* LIBS="$ac_save_LIBS" CXXFLAGS="$ac_save_CXXFLAGS" ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then echo "$ac_t""yes" 1>&6 LIBJPEG_QT='$(LIBJPEG)' else echo "$ac_t""no" 1>&6 LIBJPEG_QT= fi if test "x$kde_use_qt_emb" != "xyes"; then LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' else LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' fi test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" echo $ac_n "checking for rpath""... $ac_c" 1>&6 echo "configure:7416: checking for rpath" >&5 # Check whether --enable-rpath or --disable-rpath was given. if test "${enable_rpath+set}" = set; then enableval="$enable_rpath" USE_RPATH=$enableval else USE_RPATH=yes fi if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then KDE_RPATH="-R \$(kde_libraries)" if test -n "$qt_libraries"; then KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" fi if test -n "$X_LDFLAGS"; then KDE_RPATH="$KDE_RPATH -R \$(x_libraries)" fi if test -n "$KDE_EXTRA_RPATH"; then KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" fi fi echo "$ac_t""$USE_RPATH" 1>&6 echo $ac_n "checking for KDE""... $ac_c" 1>&6 echo "configure:7445: checking for KDE" >&5 if test "${prefix}" != NONE; then kde_includes=${prefix}/include ac_kde_includes=$prefix/include if test "${exec_prefix}" != NONE; then kde_libraries=${libdir} ac_kde_libraries=$libdir else kde_libraries=${prefix}/lib ac_kde_libraries=$prefix/lib fi else ac_kde_includes= ac_kde_libraries= kde_libraries="" kde_includes="" fi if eval "test \"`echo '$''{'ac_cv_have_kde'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else #try to guess kde locations if test "$kde_qtver" = 1; then kde_check_header="ksock.h" kde_check_lib="libkdecore.la" else kde_check_header="ksharedptr.h" kde_check_lib="libkio.la" fi if test -z ""; then kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes $includedir" test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" kde_incdirs="$ac_kde_includes $kde_incdirs" kde_incdir=NO for i in $kde_incdirs; do for j in $kde_check_header; do echo "configure: 7489: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 kde_incdir=$i break 2 fi done done ac_kde_includes="$kde_incdir" if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then { echo "configure: error: in the prefix, you've chosen, are no KDE headers installed. This will fail. So, check this please and use another prefix!" 1>&2; exit 1; } fi kde_libdirs="/usr/lib/kde/lib /usr/local/kde/lib /usr/kde/lib /usr/lib/kde /usr/lib/kde3 /usr/lib /usr/X11R6/lib /usr/local/lib /opt/kde3/lib /opt/kde/lib /usr/X11R6/kde/lib" test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib $KDEDIR $kde_libdirs" kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" kde_libdir=NO for i in $kde_libdirs; do for j in $kde_check_lib; do echo "configure: 7515: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 kde_libdir=$i break 2 fi done done ac_kde_libraries="$kde_libdir" if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then { echo "configure: error: in the prefix, you've chosen, are no KDE libraries installed. This will fail. So, check this please and use another prefix!" 1>&2; exit 1; } fi ac_kde_libraries="$kde_libdir" if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO; then ac_cv_have_kde="have_kde=no" else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" fi else ac_cv_have_kde="have_kde=no" fi fi eval "$ac_cv_have_kde" if test "$have_kde" != "yes"; then if test "${prefix}" = NONE; then ac_kde_prefix="$ac_default_prefix" else ac_kde_prefix="$prefix" fi if test "$exec_prefix" = NONE; then ac_kde_exec_prefix="$ac_kde_prefix" echo "$ac_t""will be installed in $ac_kde_prefix" 1>&6 else ac_kde_exec_prefix="$exec_prefix" echo "$ac_t""will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" 1>&6 fi kde_libraries="${libdir}" kde_includes=${ac_kde_prefix}/include else ac_cv_have_kde="have_kde=yes \ ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" echo "$ac_t""libraries $ac_kde_libraries, headers $ac_kde_includes" 1>&6 kde_libraries="$ac_kde_libraries" kde_includes="$ac_kde_includes" fi if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then KDE_INCLUDES="" else KDE_INCLUDES="-I$kde_includes" all_includes="$KDE_INCLUDES $all_includes" fi KDE_LDFLAGS="-L$kde_libraries" if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then all_libraries="$all_libraries $KDE_LDFLAGS" fi all_libraries="$all_libraries $USER_LDFLAGS" all_includes="$all_includes $USER_INCLUDES" # Check whether --enable-path-check or --disable-path-check was given. if test "${enable_path_check+set}" = set; then enableval="$enable_path_check" if test "$enableval" = "no"; then ac_use_path_checking="default" else ac_use_path_checking="" fi else if test "$kde_qtver" = 1; then ac_use_path_checking="" else ac_use_path_checking="default" fi fi echo $ac_n "checking for KDE paths""... $ac_c" 1>&6 echo "configure:7625: checking for KDE paths" >&5 kde_result="" kde_cached_paths=yes if eval "test \"`echo '$''{'kde_cv_all_paths'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$ac_use_path_checking" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then if test "$kde_qtver" = "2"; then kde_moduledir='\${libdir}/kde2' else kde_moduledir='\${libdir}/kde3' fi fi if test -z "$kde_styledir"; then kde_styledir='\${libdir}/kde3/plugins/styles' fi if test -z "$kde_widgetdir"; then kde_widgetdir='\${libdir}/kde3/plugins/designer' fi kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=defaults" else if test $kde_qtver = 1; then echo "$ac_t""compiling" 1>&6 echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6 echo "configure:7724: checking for KDE headers installed" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); printf("kde_styledir=\\"/tmp/dummy\\"\n"); printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if { (eval echo configure:7769: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6 echo "configure:7806: checking for KDE libraries installed" >&5 ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if { (eval echo configure:7809: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=$kde_result" else { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; } fi fi kde_cached_paths=no fi eval "$kde_cv_all_paths" if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test -z "$kde_styledir" || test -z "kde_widgetdir" test "x$kde_have_all_paths" != "xyes"; then kde_have_all_paths=no fi if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then # wrong values were cached, may be, we can set better ones kde_result= kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= kde_have_all_paths= kde_styledir= kde_widgetdir= if test "$ac_use_path_checking" = "default"; then if test -z "$kde_htmldir"; then kde_htmldir='\${prefix}/share/doc/HTML' fi if test -z "$kde_appsdir"; then kde_appsdir='\${prefix}/share/applnk' fi if test -z "$kde_icondir"; then kde_icondir='\${prefix}/share/icons' fi if test -z "$kde_sounddir"; then kde_sounddir='\${prefix}/share/sounds' fi if test -z "$kde_datadir"; then kde_datadir='\${prefix}/share/apps' fi if test -z "$kde_locale"; then kde_locale='\${prefix}/share/locale' fi if test -z "$kde_cgidir"; then kde_cgidir='\${exec_prefix}/cgi-bin' fi if test -z "$kde_confdir"; then kde_confdir='\${prefix}/share/config' fi if test -z "$kde_mimedir"; then kde_mimedir='\${prefix}/share/mimelnk' fi if test -z "$kde_toolbardir"; then kde_toolbardir='\${prefix}/share/toolbar' fi if test -z "$kde_wallpaperdir"; then kde_wallpaperdir='\${prefix}/share/wallpapers' fi if test -z "$kde_templatesdir"; then kde_templatesdir='\${prefix}/share/templates' fi if test -z "$kde_bindir"; then kde_bindir='\${exec_prefix}/bin' fi if test -z "$kde_servicesdir"; then kde_servicesdir='\${prefix}/share/services' fi if test -z "$kde_servicetypesdir"; then kde_servicetypesdir='\${prefix}/share/servicetypes' fi if test -z "$kde_moduledir"; then if test "$kde_qtver" = "2"; then kde_moduledir='\${libdir}/kde2' else kde_moduledir='\${libdir}/kde3' fi fi if test -z "$kde_styledir"; then kde_styledir='\${libdir}/kde3/plugins/styles' fi if test -z "$kde_widgetdir"; then kde_widgetdir='\${libdir}/kde3/plugins/designer' fi kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=defaults" else if test $kde_qtver = 1; then echo "$ac_t""compiling" 1>&6 echo $ac_n "checking for KDE headers installed""... $ac_c" 1>&6 echo "configure:7977: checking for KDE headers installed" >&5 ac_ext=C # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cxx_cross ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cat > conftest.$ac_ext < #endif #include #include "confdefs.h" #include int main() { printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); printf("kde_wallpaperdir=\\"%s\\"\n", KApplication::kde_wallpaperdir().data()); printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); printf("kde_moduledir=\\"/tmp/dummy\\"\n"); printf("kde_styledir=\\"/tmp/dummy\\"\n"); printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); return 0; } EOF ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' if { (eval echo configure:8022: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system is not able to compile a small KDE application! Check, if you installed the KDE header files correctly. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross KDE_TEST_RPATH= if test -n "$USE_RPATH"; then if test -n "$kde_libraries"; then KDE_TEST_RPATH="-R $kde_libraries" fi if test -n "$qt_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" fi if test -n "$x_libraries"; then KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" fi KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" fi echo $ac_n "checking for KDE libraries installed""... $ac_c" 1>&6 echo "configure:8059: checking for KDE libraries installed" >&5 ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' if { (eval echo configure:8062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then echo "$ac_t""yes" 1>&6 else { echo "configure: error: your system fails at linking a small KDE application! Check, if your compiler is installed correctly and if you have used the same compiler to compile Qt and kdelibs as you did use now. For more details about this problem, look at the end of config.log." 1>&2; exit 1; } fi if eval `KDEDIR= ./conftest 2>&5`; then kde_result=done else kde_result=problems fi KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log kde_have_all_paths=yes kde_cv_all_paths="kde_have_all_paths=\"yes\" \ kde_htmldir=\"$kde_htmldir\" \ kde_appsdir=\"$kde_appsdir\" \ kde_icondir=\"$kde_icondir\" \ kde_sounddir=\"$kde_sounddir\" \ kde_datadir=\"$kde_datadir\" \ kde_locale=\"$kde_locale\" \ kde_cgidir=\"$kde_cgidir\" \ kde_confdir=\"$kde_confdir\" \ kde_mimedir=\"$kde_mimedir\" \ kde_toolbardir=\"$kde_toolbardir\" \ kde_wallpaperdir=\"$kde_wallpaperdir\" \ kde_templatesdir=\"$kde_templatesdir\" \ kde_bindir=\"$kde_bindir\" \ kde_servicesdir=\"$kde_servicesdir\" \ kde_servicetypesdir=\"$kde_servicetypesdir\" \ kde_moduledir=\"$kde_moduledir\" \ kde_styledir=\"$kde_styledir\" \ kde_widgetdir=\"$kde_widgetdir\" \ kde_result=$kde_result" else { echo "configure: error: path checking not yet supported for KDE 2" 1>&2; exit 1; } fi fi eval "$kde_cv_all_paths" if test -z "$kde_htmldir" || test -z "$kde_appsdir" || test -z "$kde_icondir" || test -z "$kde_sounddir" || test -z "$kde_datadir" || test -z "$kde_locale" || test -z "$kde_cgidir" || test -z "$kde_confdir" || test -z "$kde_mimedir" || test -z "$kde_toolbardir" || test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || test -z "$kde_bindir" || test -z "$kde_servicesdir" || test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || test -z "$kde_styledir" || test -z "kde_widgetdir" test "x$kde_have_all_paths" != "xyes"; then kde_have_all_paths=no fi kde_result="$kde_result (cache overridden)" fi if test "$kde_have_all_paths" = "no"; then { echo "configure: error: configure could not run a little KDE program to test the environment. Since it had compiled and linked before, it must be a strange problem on your system. Look at config.log for details. If you are not able to fix this, look at http://www.kde.org/faq/installation.html or any www.kde.org mirror. (If you're using an egcs version on Linux, you may update binutils!) " 1>&2; exit 1; } else rm -f conftest* echo "$ac_t""$kde_result" 1>&6 fi bindir=$kde_bindir kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" if test -n "$KDEDIRS"; then kde_save_IFS=$IFS IFS=: for dir in $KDEDIRS; do kde_default_bindirs="$dir/bin $kde_default_bindirs " done IFS=$kde_save_IFS fi kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" echo $ac_n "checking for dcopidl""... $ac_c" 1>&6 echo "configure:8154: checking for dcopidl" >&5 if test -n "$DCOPIDL"; then kde_cv_path="$DCOPIDL"; else kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/dcopidl"; then if test -n "" then evalstr="$dir/dcopidl 2>&1 " if eval $evalstr; then kde_cv_path="$dir/dcopidl" break fi else kde_cv_path="$dir/dcopidl" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program dcopidl was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 DCOPIDL=$kde_cv_path fi echo $ac_n "checking for dcopidl2cpp""... $ac_c" 1>&6 echo "configure:8214: checking for dcopidl2cpp" >&5 if test -n "$DCOPIDL2CPP"; then kde_cv_path="$DCOPIDL2CPP"; else kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/dcopidl2cpp"; then if test -n "" then evalstr="$dir/dcopidl2cpp 2>&1 " if eval $evalstr; then kde_cv_path="$dir/dcopidl2cpp" break fi else kde_cv_path="$dir/dcopidl2cpp" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program dcopidl2cpp was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 DCOPIDL2CPP=$kde_cv_path fi echo $ac_n "checking for mcopidl""... $ac_c" 1>&6 echo "configure:8274: checking for mcopidl" >&5 if test -n "$MCOPIDL"; then kde_cv_path="$MCOPIDL"; else kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/mcopidl"; then if test -n "" then evalstr="$dir/mcopidl 2>&1 " if eval $evalstr; then kde_cv_path="$dir/mcopidl" break fi else kde_cv_path="$dir/mcopidl" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program mcopidl was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 MCOPIDL=$kde_cv_path fi echo $ac_n "checking for artsc-config""... $ac_c" 1>&6 echo "configure:8334: checking for artsc-config" >&5 if test -n "$ARTSCCONFIG"; then kde_cv_path="$ARTSCCONFIG"; else kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/artsc-config"; then if test -n "" then evalstr="$dir/artsc-config 2>&1 " if eval $evalstr; then kde_cv_path="$dir/artsc-config" break fi else kde_cv_path="$dir/artsc-config" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 { echo "configure: error: The important program artsc-config was not found! Please check whether you installed KDE correctly. " 1>&2; exit 1; } else echo "$ac_t""$kde_cv_path" 1>&6 ARTSCCONFIG=$kde_cv_path fi echo $ac_n "checking for kde-config""... $ac_c" 1>&6 echo "configure:8394: checking for kde-config" >&5 if test -n "$KDECONFIG"; then kde_cv_path="$KDECONFIG"; else kde_cache=`echo kde-config | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/kde-config"; then if test -n "" then evalstr="$dir/kde-config 2>&1 " if eval $evalstr; then kde_cv_path="$dir/kde-config" break fi else kde_cv_path="$dir/kde-config" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 else echo "$ac_t""$kde_cv_path" 1>&6 KDECONFIG=$kde_cv_path fi echo $ac_n "checking for meinproc""... $ac_c" 1>&6 echo "configure:8450: checking for meinproc" >&5 if test -n "$MEINPROC"; then kde_cv_path="$MEINPROC"; else kde_cache=`echo meinproc | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else kde_cv_path="NONE" dirs="$kde_default_bindirs" kde_save_IFS=$IFS IFS=':' for dir in $PATH; do dirs="$dirs $dir" done IFS=$kde_save_IFS for dir in $dirs; do if test -x "$dir/meinproc"; then if test -n "" then evalstr="$dir/meinproc 2>&1 " if eval $evalstr; then kde_cv_path="$dir/meinproc" break fi else kde_cv_path="$dir/meinproc" break fi fi done eval "kde_cv_path_$kde_cache=$kde_cv_path" fi eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" fi if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then echo "$ac_t""not found" 1>&6 else echo "$ac_t""$kde_cv_path" 1>&6 MEINPROC=$kde_cv_path fi if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" KDE_XSL_STYLESHEET=NO for i in $kde_sharedirs; do for j in apps/ksgmltools2/customization/kde-chunk.xsl; do echo "configure: 8514: $i/$j" >&5 if test -r "$i/$j"; then echo "taking that" >&5 KDE_XSL_STYLESHEET=$i break 2 fi done done if test "$KDE_XSL_STYLESHEET" = "NO"; then KDE_XSL_STYLESHEET="" else KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" fi fi DCOP_DEPENDENCIES='$(DCOPIDL)' if test -x "$KDECONFIG"; then # it can be "compiled" kde_libs_prefix=`$KDECONFIG --prefix` if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then { echo "configure: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. This means it has been moved since you installed it. This won't work. Please recompile kdelibs for the new prefix. " 1>&2; exit 1; } fi kde_libs_htmldir=`$KDECONFIG --install html --expandvars` else kde_libs_prefix='$(prefix)' kde_libs_htmldir='$(kde_htmldir)' fi if test "$kde_qtver" = 1; then kde_minidir="$kde_icondir/mini" else # for KDE 1 - this breaks KDE2 apps using minidir, but # that's the plan ;-/ kde_minidir="/dev/null" fi if test $kde_qtver = 3; then LIB_KDECORE='-lkdecore' LIB_KDEUI='-lkdeui' LIB_KIO='-lkio' LIB_SMB='-lsmb' LIB_KAB='-lkab' LIB_KHTML='-lkhtml' LIB_KSPELL='-lkspell' LIB_KPARTS='-lkparts' LIB_KDEPRINT='-lkdeprint' # these are for backward compatibility LIB_KSYCOCA='-lkio' LIB_KFILE='-lkio' elif test $kde_qtver = 2; then LIB_KDECORE='-lkdecore' LIB_KDEUI='-lkdeui' LIB_KIO='-lkio' LIB_KSYCOCA='-lksycoca' LIB_SMB='-lsmb' LIB_KFILE='-lkfile' LIB_KAB='-lkab' LIB_KHTML='-lkhtml' LIB_KSPELL='-lkspell' LIB_KPARTS='-lkparts' LIB_KDEPRINT='-lkdeprint' else LIB_KDECORE='-lkdecore -lXext $(LIB_QT)' LIB_KDEUI='-lkdeui $(LIB_KDECORE)' LIB_KFM='-lkfm $(LIB_KDECORE)' LIB_KFILE='-lkfile $(LIB_KFM) $(LIB_KDEUI)' LIB_KAB='-lkab $(LIB_KIMGIO) $(LIB_KDECORE)' fi #MIN_CONFIG ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 echo "configure:8656: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include <$ac_hdr> int main() { DIR *dirp = 0; ; return 0; } EOF if { (eval echo configure:8669: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 echo "configure:8694: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -ldir" else echo "$ac_t""no" 1>&6 fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 echo "configure:8735: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 LIBS="$LIBS -lx" else echo "$ac_t""no" 1>&6 fi fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:8777: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:8790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:8857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi for ac_hdr in fcntl.h sys/sysctl.h sys/param.h sys/time.h sys/types.h sys/user.h sys/vmmeter.h sys/resource.h vm/vmparam.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:8884: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:8894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" if test ! -s $srcdir/subdirs; then TOPSUBDIRS="" files=`cd $srcdir && ls -1` dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` for i in $dirs; do echo $i >> $srcdir/subdirs done fi if test -s $srcdir/inst-apps; then ac_topsubdirs="`cat $srcdir/inst-apps`" else ac_topsubdirs="`cat $srcdir/subdirs`" fi for i in $ac_topsubdirs; do echo $ac_n "checking if $i should be compiled""... $ac_c" 1>&6 echo "configure:8941: checking if $i should be compiled" >&5 if test -d $srcdir/$i; then install_it="yes" for j in $DO_NOT_COMPILE; do if test $i = $j; then install_it="no" fi done else install_it="no" fi echo "$ac_t""$install_it" 1>&6 if test $install_it = "yes"; then TOPSUBDIRS="$TOPSUBDIRS $i" fi done trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "\ ./Makefile \ doc/Makefile \ doc/ja/Makefile \ kdocumenteditor/Makefile \ pics/Makefile \ pics/hicolor/Makefile \ po/Makefile \ config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@target@%$target%g s%@target_alias@%$target_alias%g s%@target_cpu@%$target_cpu%g s%@target_vendor@%$target_vendor%g s%@target_os@%$target_os%g s%@build@%$build%g s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PACKAGE@%$PACKAGE%g s%@VERSION@%$VERSION%g s%@ACLOCAL@%$ACLOCAL%g s%@AUTOCONF@%$AUTOCONF%g s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g s%@CONF_FILES@%$CONF_FILES%g s%@CC@%$CC%g s%@CPP@%$CPP%g s%@CXX@%$CXX%g s%@WOVERLOADED_VIRTUAL@%$WOVERLOADED_VIRTUAL%g s%@USE_EXCEPTIONS@%$USE_EXCEPTIONS%g s%@USE_RTTI@%$USE_RTTI%g s%@CXXCPP@%$CXXCPP%g s%@NOOPT_CXXFLAGS@%$NOOPT_CXXFLAGS%g s%@NOOPT_CFLAGS@%$NOOPT_CFLAGS%g s%@REPO@%$REPO%g s%@NOREPO@%$NOREPO%g s%@KDE_USE_FINAL_TRUE@%$KDE_USE_FINAL_TRUE%g s%@KDE_USE_FINAL_FALSE@%$KDE_USE_FINAL_FALSE%g s%@KDE_USE_CLOSURE_TRUE@%$KDE_USE_CLOSURE_TRUE%g s%@KDE_USE_CLOSURE_FALSE@%$KDE_USE_CLOSURE_FALSE%g s%@KDE_CXXFLAGS@%$KDE_CXXFLAGS%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g s%@LN_S@%$LN_S%g s%@RANLIB@%$RANLIB%g s%@STRIP@%$STRIP%g s%@LIBTOOL@%$LIBTOOL%g s%@KDE_PLUGIN@%$KDE_PLUGIN%g s%@MSGFMT@%$MSGFMT%g s%@GMSGFMT@%$GMSGFMT%g s%@XGETTEXT@%$XGETTEXT%g s%@LIBUTIL@%$LIBUTIL%g s%@LIBCOMPAT@%$LIBCOMPAT%g s%@LIBCRYPT@%$LIBCRYPT%g s%@LIBSOCKET@%$LIBSOCKET%g s%@LIBRESOLV@%$LIBRESOLV%g s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g s%@LIBUCB@%$LIBUCB%g s%@LIBDL@%$LIBDL%g s%@X_INCLUDES@%$X_INCLUDES%g s%@X_LDFLAGS@%$X_LDFLAGS%g s%@x_libraries@%$x_libraries%g s%@x_includes@%$x_includes%g s%@LIBSM@%$LIBSM%g s%@X_PRE_LIBS@%$X_PRE_LIBS%g s%@LIB_X11@%$LIB_X11%g s%@LIBXINERAMA@%$LIBXINERAMA%g s%@QTE_NORTTI@%$QTE_NORTTI%g s%@LIB_XEXT@%$LIB_XEXT%g s%@LIBPTHREAD@%$LIBPTHREAD%g s%@USE_THREADS@%$USE_THREADS%g s%@KDE_MT_LDFLAGS@%$KDE_MT_LDFLAGS%g s%@KDE_MT_LIBS@%$KDE_MT_LIBS%g s%@USER_INCLUDES@%$USER_INCLUDES%g s%@USER_LDFLAGS@%$USER_LDFLAGS%g s%@LIBZ@%$LIBZ%g s%@LIBPNG@%$LIBPNG%g s%@LIBJPEG@%$LIBJPEG%g s%@qt_libraries@%$qt_libraries%g s%@qt_includes@%$qt_includes%g s%@QT_INCLUDES@%$QT_INCLUDES%g s%@QT_LDFLAGS@%$QT_LDFLAGS%g s%@MOC@%$MOC%g s%@UIC@%$UIC%g s%@UIC_TR@%$UIC_TR%g s%@LIB_QT@%$LIB_QT%g s%@LIB_QPE@%$LIB_QPE%g s%@kde_qtver@%$kde_qtver%g s%@KDE_EXTRA_RPATH@%$KDE_EXTRA_RPATH%g s%@KDE_RPATH@%$KDE_RPATH%g s%@kde_libraries@%$kde_libraries%g s%@kde_includes@%$kde_includes%g s%@KDE_LDFLAGS@%$KDE_LDFLAGS%g s%@KDE_INCLUDES@%$KDE_INCLUDES%g s%@all_includes@%$all_includes%g s%@all_libraries@%$all_libraries%g s%@AUTODIRS@%$AUTODIRS%g s%@DCOPIDL@%$DCOPIDL%g s%@DCOPIDL2CPP@%$DCOPIDL2CPP%g s%@DCOP_DEPENDENCIES@%$DCOP_DEPENDENCIES%g s%@MCOPIDL@%$MCOPIDL%g s%@ARTSCCONFIG@%$ARTSCCONFIG%g s%@KDECONFIG@%$KDECONFIG%g s%@MEINPROC@%$MEINPROC%g s%@KDE_XSL_STYLESHEET@%$KDE_XSL_STYLESHEET%g s%@kde_libs_prefix@%$kde_libs_prefix%g s%@kde_libs_htmldir@%$kde_libs_htmldir%g s%@kde_htmldir@%$kde_htmldir%g s%@kde_appsdir@%$kde_appsdir%g s%@kde_icondir@%$kde_icondir%g s%@kde_sounddir@%$kde_sounddir%g s%@kde_datadir@%$kde_datadir%g s%@kde_locale@%$kde_locale%g s%@kde_confdir@%$kde_confdir%g s%@kde_mimedir@%$kde_mimedir%g s%@kde_wallpaperdir@%$kde_wallpaperdir%g s%@kde_bindir@%$kde_bindir%g s%@kde_templatesdir@%$kde_templatesdir%g s%@kde_servicesdir@%$kde_servicesdir%g s%@kde_servicetypesdir@%$kde_servicetypesdir%g s%@kde_moduledir@%$kde_moduledir%g s%@kde_styledir@%$kde_styledir%g s%@kde_widgetdir@%$kde_widgetdir%g s%@LIB_KDECORE@%$LIB_KDECORE%g s%@LIB_KDEUI@%$LIB_KDEUI%g s%@LIB_KIO@%$LIB_KIO%g s%@LIB_SMB@%$LIB_SMB%g s%@LIB_KAB@%$LIB_KAB%g s%@LIB_KHTML@%$LIB_KHTML%g s%@LIB_KSPELL@%$LIB_KSPELL%g s%@LIB_KPARTS@%$LIB_KPARTS%g s%@LIB_KDEPRINT@%$LIB_KDEPRINT%g s%@LIB_KSYCOCA@%$LIB_KSYCOCA%g s%@LIB_KFILE@%$LIB_KFILE%g s%@LIB_KFM@%$LIB_KFM%g s%@TOPSUBDIRS@%$TOPSUBDIRS%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; "") ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h exit 0 EOF if test "x$with_fast_perl" = "xyes" ; then perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS || mv $CONFIG_STATUS.bak $CONFIG_STATUS; rm -f $CONFIG_STATUS.bak; fi chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 kdocumenteditor-1.0/config.h.in0100644000076400007640000000446107742332026016545 0ustar tasukuhomeuser/* config.h.in. Generated automatically from configure.in by autoheader. */ /* Define if you have the ANSI C header files. */ #undef STDC_HEADERS /* The number of bytes in a char. */ #undef SIZEOF_CHAR /* The number of bytes in a char *. */ #undef SIZEOF_CHAR_P /* The number of bytes in a int. */ #undef SIZEOF_INT /* The number of bytes in a long. */ #undef SIZEOF_LONG /* Define if you have the res_init function. */ #undef HAVE_RES_INIT /* Define if you have the header file. */ #undef HAVE_DIRENT_H /* Define if you have the header file. */ #undef HAVE_FCNTL_H /* Define if you have the header file. */ #undef HAVE_NDIR_H /* Define if you have the header file. */ #undef HAVE_PTHREAD_LINUXTHREADS_PTHREAD_H /* Define if you have the header file. */ #undef HAVE_SYS_DIR_H /* Define if you have the header file. */ #undef HAVE_SYS_NDIR_H /* Define if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define if you have the header file. */ #undef HAVE_SYS_RESOURCE_H /* Define if you have the header file. */ #undef HAVE_SYS_SYSCTL_H /* Define if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define if you have the header file. */ #undef HAVE_SYS_USER_H /* Define if you have the header file. */ #undef HAVE_SYS_VMMETER_H /* Define if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have the header file. */ #undef HAVE_VM_VMPARAM_H /* Name of package */ #undef PACKAGE /* Version number of package */ #undef VERSION /* C++ compiler supports template repository */ #undef HAVE_TEMPLATE_REPOSITORY /* Defines if your system has the crypt function */ #undef HAVE_CRYPT /* Define the real type of socklen_t */ #undef socklen_t /* Compatibility define */ #undef ksize_t /* Define if you have libz */ #undef HAVE_LIBZ /* Define if you want Xinerama support */ #undef HAVE_XINERAMA /* Define if you have libpng */ #undef HAVE_LIBPNG /* Define if you have libjpeg */ #undef HAVE_LIBJPEG /* Define if you have a working libpthread (will enable threaded code) */ #undef HAVE_LIBPTHREAD kdocumenteditor-1.0/stamp-h.in0100644000076400007640000000000007742332230016401 0ustar tasukuhomeuserkdocumenteditor-1.0/Makefile.in0100644000076400007640000004043207742332027016566 0ustar tasukuhomeuser# KDE tags expanded automatically by am_edit - $Revision: 1.305 $ # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ #>- bindir = @bindir@ #>+ 3 DEPDIR = .deps bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ libdir = @libdir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_alias = @build_alias@ build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ ARTSCCONFIG = @ARTSCCONFIG@ AS = @AS@ AUTODIRS = @AUTODIRS@ CC = @CC@ CONF_FILES = @CONF_FILES@ CPP = @CPP@ CXX = @CXX@ CXXCPP = @CXXCPP@ DCOPIDL = @DCOPIDL@ DCOPIDL2CPP = @DCOPIDL2CPP@ DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ DLLTOOL = @DLLTOOL@ DPMSINC = @DPMSINC@ DPMSLIB = @DPMSLIB@ EXEEXT = @EXEEXT@ GCJ = @GCJ@ GCJFLAGS = @GCJFLAGS@ GLINC = @GLINC@ GLLIB = @GLLIB@ GMSGFMT = @GMSGFMT@ IDL = @IDL@ IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ JAR = @JAR@ JAVAC = @JAVAC@ JAVAH = @JAVAH@ JVMLIBS = @JVMLIBS@ KDECONFIG = @KDECONFIG@ KDE_CXXFLAGS = @KDE_CXXFLAGS@ KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ KDE_INCLUDES = @KDE_INCLUDES@ KDE_LDFLAGS = @KDE_LDFLAGS@ KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ KDE_MT_LIBS = @KDE_MT_LIBS@ KDE_PLUGIN = @KDE_PLUGIN@ KDE_RPATH = @KDE_RPATH@ KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ LEX = @LEX@ LEXLIB = @LEXLIB@ LIBCOMPAT = @LIBCOMPAT@ LIBCRYPT = @LIBCRYPT@ LIBDL = @LIBDL@ LIBGEN = @LIBGEN@ LIBJPEG = @LIBJPEG@ LIBMICO = @LIBMICO@ LIBOBJS = @LIBOBJS@ LIBPNG = @LIBPNG@ LIBPTHREAD = @LIBPTHREAD@ LIBPYTHON = @LIBPYTHON@ LIBQIMGIO = @LIBQIMGIO@ LIBRESOLV = @LIBRESOLV@ LIBSHADOW = @LIBSHADOW@ LIBSM = @LIBSM@ LIBSOCKET = @LIBSOCKET@ LIBTIFF = @LIBTIFF@ LIBTOOL = @LIBTOOL@ LIBUCB = @LIBUCB@ LIBUTIL = @LIBUTIL@ LIBXINERAMA = @LIBXINERAMA@ LIBZ = @LIBZ@ LIB_KAB = @LIB_KAB@ LIB_KDECORE = @LIB_KDECORE@ LIB_KDEPRINT = @LIB_KDEPRINT@ LIB_KDEUI = @LIB_KDEUI@ LIB_KFILE = @LIB_KFILE@ LIB_KFM = @LIB_KFM@ LIB_KHTML = @LIB_KHTML@ LIB_KIMGIO = @LIB_KIMGIO@ LIB_KIO = @LIB_KIO@ LIB_KPARTS = @LIB_KPARTS@ LIB_KSPELL = @LIB_KSPELL@ LIB_KSYCOCA = @LIB_KSYCOCA@ LIB_QPE = @LIB_QPE@ LIB_QT = @LIB_QT@ LIB_QTOPIA = @LIB_QTOPIA@ LIB_SMB = @LIB_SMB@ LIB_X11 = @LIB_X11@ LIB_XEXT = @LIB_XEXT@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ MCOPIDL = @MCOPIDL@ MEINPROC = @MEINPROC@ MICO_INCLUDES = @MICO_INCLUDES@ MICO_LDFLAGS = @MICO_LDFLAGS@ MOC = @MOC@ MSGFMT = @MSGFMT@ NOOPT_CFLAGS = @NOOPT_CFLAGS@ NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ NOREPO = @NOREPO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PAMLIBS = @PAMLIBS@ PASSWDLIBS = @PASSWDLIBS@ PYTHONINC = @PYTHONINC@ PYTHONLIB = @PYTHONLIB@ PYTHONMODDIR = @PYTHONMODDIR@ QTE_NORTTI = @QTE_NORTTI@ QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ QT_INCLUDES = @QT_INCLUDES@ QT_LDFLAGS = @QT_LDFLAGS@ RANLIB = @RANLIB@ REPO = @REPO@ SETUIDFLAGS = @SETUIDFLAGS@ STRIP = @STRIP@ TOPSUBDIRS = @TOPSUBDIRS@ UIC = @UIC@ UIC_TR = @UIC_TR@ USER_INCLUDES = @USER_INCLUDES@ USER_LDFLAGS = @USER_LDFLAGS@ USE_EXCEPTIONS = @USE_EXCEPTIONS@ USE_RTTI = @USE_RTTI@ USE_THREADS = @USE_THREADS@ VERSION = @VERSION@ WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ XGETTEXT = @XGETTEXT@ XPMINC = @XPMINC@ XPMLIB = @XPMLIB@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_INCLUDES = @X_INCLUDES@ X_LDFLAGS = @X_LDFLAGS@ X_PRE_LIBS = @X_PRE_LIBS@ all_includes = @all_includes@ all_libraries = @all_libraries@ idldir = @idldir@ jni_includes = @jni_includes@ kde_appsdir = @kde_appsdir@ kde_bindir = @kde_bindir@ kde_confdir = @kde_confdir@ kde_datadir = @kde_datadir@ kde_htmldir = @kde_htmldir@ kde_icondir = @kde_icondir@ kde_includes = @kde_includes@ kde_libraries = @kde_libraries@ kde_libs_htmldir = @kde_libs_htmldir@ kde_libs_prefix = @kde_libs_prefix@ kde_locale = @kde_locale@ kde_mimedir = @kde_mimedir@ kde_moduledir = @kde_moduledir@ kde_qtver = @kde_qtver@ kde_servicesdir = @kde_servicesdir@ kde_servicetypesdir = @kde_servicetypesdir@ kde_sounddir = @kde_sounddir@ kde_styledir = @kde_styledir@ kde_templatesdir = @kde_templatesdir@ kde_wallpaperdir = @kde_wallpaperdir@ kde_widgetdir = @kde_widgetdir@ micodir = @micodir@ qt_includes = @qt_includes@ qt_libraries = @qt_libraries@ x_includes = @x_includes@ x_libraries = @x_libraries@ AUTOMAKE_OPTIONS = foreign 1.4 SUBDIRS = $(TOPSUBDIRS) DISTCLEANFILES = inst-apps MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 SUBDIRS ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = DIST_COMMON = ./stamp-h.in Makefile.am Makefile.in acinclude.m4 \ aclocal.m4 config.h.in configure configure.in #>- DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) #>+ 4 KDE_DIST=subdirs Makefile.cvs configure.in.in configure.files DISTFILES= $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) TAR = gtar GZIP_ENV = --best #>- all: all-redirect #>+ 1 all: docs-am all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) #>- cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile #>+ 2 cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile cd $(top_srcdir) && perl admin/am_edit Makefile.in Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status $(ACLOCAL_M4): configure.in acinclude.m4 cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure.in $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null $(srcdir)/config.h.in: $(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOHEADER) @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null mostlyclean-hdr: clean-hdr: distclean-hdr: -rm -f config.h maintainer-clean-hdr: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. @SET_MAKE@ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) dist -rm -rf $(distdir) @banner="$(distdir).tar.gz is ready for distribution"; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes" dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign ./Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive all-recursive-am: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data-local install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile config.h all-redirect: all-recursive-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-tags clean-generic mostlyclean-am #>- clean: clean-recursive #>+ 1 clean: kde-rpo-clean clean-recursive distclean-am: distclean-hdr distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ install-data-recursive uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ install-exec-am install-exec install-data-local install-data-am \ install-data install-am install uninstall-am uninstall all-redirect \ all-am all installdirs-am installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean install-data-local: @echo "" @echo "" @echo "" @echo "*************** Important *************************" @echo "" @echo " Add "$(bindir)" to your PATH" @echo "" @echo " Please report bugs with our web form at" @echo " http://bugs.kde.org." @echo "" @echo " Stephan Kulow and all the KDE" @echo " developers wish you fun with the KDE." @echo "****************************************************" @echo "" $(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; $(top_srcdir)/subdirs: cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs $(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: #>+ 2 docs-am: #>+ 5 force-reedit: cd $(top_srcdir) && $(AUTOMAKE) --foreign ./Makefile cd $(top_srcdir) && perl admin/am_edit Makefile.in #>+ 2 final: $(MAKE) all-am #>+ 2 final-install: $(MAKE) install-am #>+ 2 no-final: $(MAKE) all-am #>+ 2 no-final-install: $(MAKE) install-am #>+ 3 cvs-clean: $(MAKE) -f $(top_srcdir)/admin/Makefile.common cvs-clean #>+ 3 kde-rpo-clean: -rm -f *.rpo